dmesg - gzip
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.25-nrj-desktop-1rosa (mockbuild@rosa2012.1-base) (gcc version 4.9.2 20140811 (ROSA) (Linaro GCC 4.9-2014.08) ) #1 SMP PREEMPT Mon Nov 24 11:14:10 UTC 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cb7f2fff] usable
BIOS-e820: [mem 0x00000000cb7f3000-0x00000000cb7f9fff] ACPI NVS
BIOS-e820: [mem 0x00000000cb7fa000-0x00000000cbc3cfff] usable
BIOS-e820: [mem 0x00000000cbc3d000-0x00000000cc1cdfff] reserved
BIOS-e820: [mem 0x00000000cc1ce000-0x00000000dddabfff] usable
BIOS-e820: [mem 0x00000000dddac000-0x00000000dde41fff] reserved
BIOS-e820: [mem 0x00000000dde42000-0x00000000dde93fff] usable
BIOS-e820: [mem 0x00000000dde94000-0x00000000ddfc4fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddfc5000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7851/Z87I (MS-7851), BIOS V1.6 02/24/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f1e000, 0x01f1efff] PGTABLE
BRK [0x01f1f000, 0x01f1ffff] PGTABLE
BRK [0x01f20000, 0x01f20fff] PGTABLE
init_memory_mapping: [mem 0x41ee00000-0x41effffff]
[mem 0x41ee00000-0x41effffff] page 2M
BRK [0x01f21000, 0x01f21fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41edfffff]
[mem 0x41c000000-0x41edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcb7f2fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcb5fffff] page 2M
[mem 0xcb600000-0xcb7f2fff] page 4k
init_memory_mapping: [mem 0xcb7fa000-0xcbc3cfff]
[mem 0xcb7fa000-0xcb7fffff] page 4k
[mem 0xcb800000-0xcbbfffff] page 2M
[mem 0xcbc00000-0xcbc3cfff] page 4k
BRK [0x01f22000, 0x01f22fff] PGTABLE
init_memory_mapping: [mem 0xcc1ce000-0xdddabfff]
[mem 0xcc1ce000-0xcc1fffff] page 4k
[mem 0xcc200000-0xddbfffff] page 2M
[mem 0xddc00000-0xdddabfff] page 4k
BRK [0x01f23000, 0x01f23fff] PGTABLE
init_memory_mapping: [mem 0xdde42000-0xdde93fff]
[mem 0xdde42000-0xdde93fff] page 4k
init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[mem 0xdefff000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x36c4c000-0x3761dfff]
ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 00000000ddf98080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ddfa5948 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ddf98190 00D7B5 (v02 ALASKA A M I 00000034 INTL 20120711)
ACPI: FACS 00000000ddfc4f80 000040
ACPI: APIC 00000000ddfa5a58 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ddfa5ad0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 00000000ddfa5b18 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000ddfa5bc0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 00000000ddfa6698 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000ddfa66d8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ddfa6710 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000ddfa6a80 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000ddfa9f68 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: SSDT 00000000ddfa9fe8 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
Initmem setup node 0 [mem 0x00000000-0x41effffff]
NODE_DATA [mem 0x41eff6000-0x41effafff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xcb7f2fff]
node 0: [mem 0xcb7fa000-0xcbc3cfff]
node 0: [mem 0xcc1ce000-0xdddabfff]
node 0: [mem 0xdde42000-0xdde93fff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x100000000-0x41effffff]
On node 0 totalpages: 4179971
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14114 pages used for memmap
DMA32 zone: 903271 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcb7f3000-0xcb7f9fff]
PM: Registered nosave memory: [mem 0xcbc3d000-0xcc1cdfff]
PM: Registered nosave memory: [mem 0xdddac000-0xdde41fff]
PM: Registered nosave memory: [mem 0xdde94000-0xddfc4fff]
PM: Registered nosave memory: [mem 0xddfc5000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88041ec00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4114636
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16365288K/16719884K available (6605K kernel code, 958K rwdata, 3128K rodata, 1252K init, 944K bss, 354596K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.039 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.07 BogoMIPS (lpj=3200039)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff81e2a000 - ffffffff81e30000)
ftrace: allocating 24170 entries in 95 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000deea3000 end: 0x000000deeb2fff
IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (25600.31 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcb7f3000-0xcb7f9fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdde94000-0xddfc4fff] (1249280 bytes)
xor: automatically using best checksumming function:
avx : 27360.000 MB/sec
pinctrl core: initialized pinctrl subsystem
RTC time: 15:47:13, date: 12/15/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
raid6: sse2x1 10238 MB/s
raid6: sse2x2 12902 MB/s
raid6: sse2x4 14968 MB/s
raid6: avx2x1 19839 MB/s
raid6: avx2x2 22843 MB/s
raid6: avx2x4 26789 MB/s
raid6: using algorithm avx2x4 (26789 MB/s)
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dde36c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000dde35d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf741a000-0xf741a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7418000-0xf74183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7417000-0xf74173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7416000-0xf74167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7415000-0xf74150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7300000-0xf7300fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2200000-0xf2203fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf7200000-0xf7200fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:05:00.0: [8086:0887] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcb7f3000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcbc3d000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdddac000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdde94000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a10-0x0a1f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:03: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10056K (ffff880036c4c000 - ffff88003761e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9dac000-0xdddac000] (64MB) mapped at [ffff8800d9dac000-ffff8800dddabfff]
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1418658433.356:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31983
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler version: v7r6
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Linux agpgart interface v0.103
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x300000 bytes, mapped to 0xffffc90005c00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
brd: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416180 irq 42
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
Key type dns_resolver registered
mpls_gso: MPLS GSO support
registered taskstats version 1
bio: create slab at 1
Btrfs loaded
Magic number: 10:989:790
rtc_cmos 00:06: setting system clock to 2014-12-15 15:47:13 UTC (1418658433)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: HPA detected: current 976771055, native 976773168
ata2.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATAPI: PIONEER DVD-RW DVR-221L, 1.00, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-221L 1.00 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1252K (ffffffff81cf1000 - ffffffff81e2a000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1576K (ffff880001676000 - ffff880001800000)
Freeing unused kernel memory: 968K (ffff880001b0e000 - ffff880001c00000)
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
systemd[1]: Inserted module 'ipv6'
systemd[1]: Set hostname to .
random: systemd urandom read with 16 bits of entropy available
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[101]: Vacuuming done, freed 0 bytes
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
systemd-udevd[206]: starting version 208
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7418000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.25-nrj-desktop-1rosa ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7417000
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.25-nrj-desktop-1rosa ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.14.25-nrj-desktop-1rosa xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.14.25-nrj-desktop-1rosa xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
PM: Marking nosave pages: [mem 0xcb7f3000-0xcb7f9fff]
PM: Marking nosave pages: [mem 0xcbc3d000-0xcc1cdfff]
PM: Marking nosave pages: [mem 0xdddac000-0xdde41fff]
PM: Marking nosave pages: [mem 0xdde94000-0xdeffefff]
PM: Marking nosave pages: [mem 0xdf000000-0xffffffff]
PM: Basic memory bitmaps created
tsc: Refined TSC clocksource calibration: 3199.997 MHz
PM: Basic memory bitmaps freed
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
systemd-journald[101]: Received SIGTERM
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=046d, idProduct=c247
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: G100s Optical Gaming Mouse
usb 3-1: Manufacturer: Logitech
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
usb 3-2: new low-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=046d, idProduct=c31f
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer: Logitech
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Switched to clocksource tsc
usb 3-5: new high-speed USB device number 4 using xhci_hcd
RUN systemd EFI generator
Stop write mount to EFI
usb 3-5: New USB device found, idVendor=05ac, idProduct=9126
usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 6 ports detected
usb 3-7: new full-speed USB device number 5 using xhci_hcd
usb 3-7: New USB device found, idVendor=8087, idProduct=07da
usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-5.4: new full-speed USB device number 6 using xhci_hcd
usb 3-5.4: New USB device found, idVendor=05ac, idProduct=1105
usb 3-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5.4: Product: Display Audio
usb 3-5.4: Manufacturer: Apple Inc.
usb 3-5.4: SerialNumber: 269AE702
usb 3-5.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-5.4: ep 0x83 - rounding interval to 128 microframes, ep desc says 240 microframes
usb 3-5.5: new high-speed USB device number 7 using xhci_hcd
usb 3-5.5: New USB device found, idVendor=05ac, idProduct=8508
usb 3-5.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5.5: Product: Display iSight
usb 3-5.5: Manufacturer: Apple Inc.
usb 3-5.5: SerialNumber: 8JB1N2V08BRZ3L00
usb 3-5.6: new full-speed USB device number 8 using xhci_hcd
usb 3-5.6: New USB device found, idVendor=05ac, idProduct=9226
usb 3-5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5.6: Product: Apple LED Cinema Display
usb 3-5.6: Manufacturer: Apple Inc.
usb 3-5.6: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
systemd-readahead[410]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd-journald[420]: Vacuuming done, freed 0 bytes
EXT4-fs (sda1): re-mounted. Opts: (null)
vboxguest: PCI device not found, probably running on physical hardware.
systemd-udevd[476]: starting version 208
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
SKU: Nid=0x1d sku_cfg=0x4027f603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4027f603 for NID 0x1d
realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90005b86000, d4:3d:7e:bf:dc:0b, XID 0c000800 IRQ 46
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 47 for MSI/MSI-X
r8169 0000:04:00.0 eth1: RTL8168g/8111g at 0xffffc90005b8e000, d4:3d:7e:bf:dc:0a, XID 0c000800 IRQ 47
r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:d
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:05:00.0: irq 48 for MSI/MSI-X
iwlwifi 0000:05:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.65 Tue Dec 2 09:50:34 PST 2014
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device Display iSight (05ac:8508)
input: Display iSight as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.5/3-5.5:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG enabled
iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
iwlwifi 0000:05:00.0: L1 Disabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
6:1:1: cannot get freq at ep 0x4
6:1:2: cannot get freq at ep 0x4
6:2:1: cannot get freq at ep 0x84
usb_audio: Warning! Unlikely big volume range (=16384), cval->res is probably wrong.
usb_audio: [2] FU [PCM Playback Volume] ch = 2, val = -16384/0/1
usb_audio: Warning! Unlikely big volume range (=15872), cval->res is probably wrong.
usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = -11264/4608/1
usbcore: registered new interface driver snd-usb-audio
status interrupt: 80 02
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
vboxguest: PCI device not found, probably running on physical hardware.
input: Logitech G100s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C247.0001/input/input18
hid-generic 0003:046D:C247.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0000:00:14.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C31F.0002/input/input19
hid-generic 0003:046D:C31F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-2/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C31F.0003/input/input20
hid-generic 0003:046D:C31F.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-2/input1
input: Apple Inc. Display Audio as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.4/3-5.4:1.3/0003:05AC:1105.0004/input/input21
hid-generic 0003:05AC:1105.0004: input,hidraw3: USB HID v1.11 Device [Apple Inc. Display Audio] on usb-0000:00:14.0-5.4/input3
hid-generic 0003:05AC:9226.0005: hiddev0,hidraw4: USB HID v1.11 Device [Apple Inc. Apple LED Cinema Display] on usb-0000:00:14.0-5.6/input0
Adding 4094972k swap on /dev/sda5. Priority:-1 extents:1 across:4094972k FS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[420]: Received request to flush runtime journal from PID 1
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1a0 offMax=0xdc8
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.16 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 4918 (jexec)
nvidia 0000:01:00.0: irq 49 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
8021q: 802.1Q VLAN Support v1.8
IPv6: ADDRCONF(NETDEV_UP): vlan20: link is not ready
IPv6: ADDRCONF(NETDEV_UP): vlan30: link is not ready
r8169 0000:04:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vlan20: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): vlan30: link becomes ready
NET: Registered protocol family 17
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Bridge firewalling registered
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
fuse init (API version 7.22)
6:2:1: cannot get freq at ep 0x84
6:2:1: cannot get freq at ep 0x84
6:1:1: cannot get freq at ep 0x4
6:1:1: cannot get freq at ep 0x4
6:2:1: cannot get freq at ep 0x84
6:2:1: cannot get freq at ep 0x84
6:1:1: cannot get freq at ep 0x4
6:1:1: cannot get freq at ep 0x4
6:2:1: cannot get freq at ep 0x84
6:2:1: cannot get freq at ep 0x84
6:1:1: cannot get freq at ep 0x4
6:1:1: cannot get freq at ep 0x4
6:2:1: cannot get freq at ep 0x84
6:2:1: cannot get freq at ep 0x84
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI
RUN systemd EFI generator
Stop write mount to EFI