dmesg - cpu-deepin
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cd5c9fff] usable
BIOS-e820: [mem 0x00000000cd5ca000-0x00000000cd5d0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cd5d1000-0x00000000cdf6bfff] usable
BIOS-e820: [mem 0x00000000cdf6c000-0x00000000ce2ecfff] reserved
BIOS-e820: [mem 0x00000000ce2ed000-0x00000000de176fff] usable
BIOS-e820: [mem 0x00000000de177000-0x00000000de200fff] reserved
BIOS-e820: [mem 0x00000000de201000-0x00000000de366fff] usable
BIOS-e820: [mem 0x00000000de367000-0x00000000de88dfff] ACPI NVS
BIOS-e820: [mem 0x00000000de88e000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Vostro 3900 /0T1D10 , BIOS A05 04/04/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F00000000 write-back
1 base 0100000000 mask 7FF0000000 write-back
2 base 0110000000 mask 7FF8000000 write-back
3 base 0118000000 mask 7FFC000000 write-back
4 base 011C000000 mask 7FFE000000 write-back
5 base 011E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 256MB, type WB
reg 2, base: 4352MB, range: 128MB, type WB
reg 3, base: 4480MB, range: 64MB, type WB
reg 4, base: 4544MB, range: 32MB, type WB
reg 5, base: 4576MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 4080M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4592MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb60-0x000fdb6f] mapped at [ffff8800000fdb60]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[mem 0x11c000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcd5c9fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcd3fffff] page 2M
[mem 0xcd400000-0xcd5c9fff] page 4k
init_memory_mapping: [mem 0xcd5d1000-0xcdf6bfff]
[mem 0xcd5d1000-0xcd5fffff] page 4k
[mem 0xcd600000-0xcddfffff] page 2M
[mem 0xcde00000-0xcdf6bfff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0xce2ed000-0xde176fff]
[mem 0xce2ed000-0xce3fffff] page 4k
[mem 0xce400000-0xddffffff] page 2M
[mem 0xde000000-0xde176fff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xde201000-0xde366fff]
[mem 0xde201000-0xde366fff] page 4k
init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[mem 0xdefff000-0xdeffffff] page 4k
RAMDISK: [mem 0x35b1c000-0x36d85fff]
ACPI: RSDP 00000000000f0490 000024 (v02 DELL )
ACPI: XSDT 00000000de473080 000084 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: FACP 00000000de47f860 00010C (v05 DELL WN09 01072009 AMI 00010013)
ACPI: DSDT 00000000de4731a0 00C6BD (v02 DELL WN09 00000000 INTL 20120711)
ACPI: FACS 00000000de88c080 000040
ACPI: APIC 00000000de47f970 000072 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: FPDT 00000000de47f9e8 000044 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: ASF! 00000000de47fa30 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: SLIC 00000000de47fad8 000176 (v01 DELL WN09 01072009 AMI 00010013)
ACPI: SSDT 00000000de47fc50 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000de480190 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 00000000de480c68 00003C (v01 DELL WN09 01072009 MSFT 00000097)
ACPI: HPET 00000000de480ca8 000038 (v01 DELL WN09 01072009 AMI. 00000005)
ACPI: SSDT 00000000de480ce0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000de481050 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: MSDM 00000000de484578 000055 (v03 DELL WN09 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
Initmem setup node 0 [mem 0x00000000-0x11effffff]
NODE_DATA [mem 0x11eff6000-0x11effafff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a600000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xcd5c9fff]
node 0: [mem 0xcd5d1000-0xcdf6bfff]
node 0: [mem 0xce2ed000-0xde176fff]
node 0: [mem 0xde201000-0xde366fff]
node 0: [mem 0xdefff000-0xdeffffff]
node 0: [mem 0x100000000-0x11effffff]
On node 0 totalpages: 1036018
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14142 pages used for memmap
DMA32 zone: 905046 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd5ca000-0xcd5d0fff]
PM: Registered nosave memory: [mem 0xcdf6c000-0xce2ecfff]
PM: Registered nosave memory: [mem 0xde177000-0xde200fff]
PM: Registered nosave memory: [mem 0xde367000-0xde88dfff]
PM: Registered nosave memory: [mem 0xde88e000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1019807
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3976512K/4144072K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 167560K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3492.096 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.19 BogoMIPS (lpj=13968384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i3-4150 CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27936.76 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcd5ca000-0xcd5d0fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xde367000-0xde88dfff] (5402624 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:32:49, date: 12/05/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000de1f6c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000de1f6618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000de1f5d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:104c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [1283:8893] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd5ca000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdf6c000-0xcfffffff]
e820: reserve RAM buffer [mem 0xde177000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde367000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a1f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0a: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff]
pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18856K (ffff880035b1c000 - ffff880036d86000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xda177000-0xde177000] (64MB) mapped at [ffff8800da177000-ffff8800de176fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1417768369.384:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7803
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8c10 ss_vid 1028 ss_did 61c
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90004780000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7218000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:735:522
rtc_cmos 00:06: setting system clock to 2014-12-05 08:32:51 UTC (1417768371)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[113]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000656000, f8:bc:12:9f:be:6b, XID 0c000800 IRQ 46
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 45
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216300 irq 45
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500DM002-1BD142, KC48, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC48 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATAPI: TSSTcorp DVD+/-RW SH-216DB, D100, max UDMA/100
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp DVD+-RW SH-216DB D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 3491.914 MHz
usb 3-5: new low-speed USB device number 2 using xhci_hcd
usb 3-5: New USB device found, idVendor=04ca, idProduct=0061
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Optical Mouse
usb 3-5: Manufacturer: PixArt
usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input5
hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-5/input0
usb 3-6: new low-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=413c, idProduct=2107
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: Dell USB Entry Keyboard
usb 3-6: Manufacturer: Dell
usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input6
hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-6/input0
usb 3-7: new high-speed USB device number 4 using xhci_hcd
usb 3-7: New USB device found, idVendor=058f, idProduct=6387
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: Mass Storage
usb 3-7: Manufacturer: Generic
usb 3-7: SerialNumber: B11D5632
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi5 : usb-storage 3-7:1.0
usbcore: registered new interface driver usb-storage
usb 3-9: new high-speed USB device number 5 using xhci_hcd
usb 3-9: New USB device found, idVendor=0bda, idProduct=0184
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9: Product: USB2.0-CRW
usb 3-9: Manufacturer: Generic
usb 3-9: SerialNumber: 20100818841300000
usb-storage 3-9:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-9:1.0
random: nonblocking pool is initialized
Switched to clocksource tsc
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
scsi 5:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 7829504 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:3: Direct-Access Generic- M.S./M.S.Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
sdb: sdb4
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI removable disk
Adding 4142076k swap on /dev/sda5. Priority:-1 extents:1 across:4142076k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[356]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
checking generic (f1000000 580000) vs hw (e8000000 8000000)
checking generic (f1000000 580000) vs hw (f0000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d90c0a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
nouveau [ DEVICE][0000:01:00.0] Family : NVD0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
device-mapper: multipath: version 1.6.0 loaded
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 75.19.8b.00.02
nouveau 0000:01:00.0: irq 48 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8800c41a9800] reclocking of this ram type unsupported
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
EXT4-fs (sda9): re-mounted. Opts: data=ordered
nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 873 MHz memory 825 MHz
nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[TTM] Zone kernel: Available graphics memory: 1999124 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000000
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 02011362 00020010
nouveau [ DRM] DCB outp 03: 04022310 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY0 for buffer copies
SKU: Nid=0x1d sku_cfg=0x40400001
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x19
Front Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x40400001 for NID 0x1d
realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0662
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
nouveau [ DRM] allocated 1600x900 fb: 0x60000, bo ffff8800c3f60400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
init: failsafe main process (622) killed by TERM signal
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
init: cups main process (737) killed by HUP signal
init: cups main process ended, respawning
init: dde-account main process (830) terminated with status 2
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
systemd-hostnamed[955]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sha512_ssse3: Using AVX2 optimized SHA-512 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
NET: Registered protocol family 15
Initializing XFRM netlink socket
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Non-volatile memory driver v1.3
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1457) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-hostnamed[14390]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-7: USB disconnect, device number 4
usb 3-8: new high-speed USB device number 6 using xhci_hcd
usb 3-8: New USB device found, idVendor=058f, idProduct=6387
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: Mass Storage
usb 3-8: Manufacturer: Generic
usb 3-8: SerialNumber: B11D5632
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi7 : usb-storage 3-8:1.0
scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 7829504 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb4
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[15309]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[20172]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sdb: detected capacity change from 4008706048 to 0
usb 3-8: USB disconnect, device number 6
systemd-hostnamed[21544]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-9: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800362f7380
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800362f73c0
usb 3-9: reset high-speed USB device number 5 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800362f7380
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800362f73c0
init: upstart-udev-bridge main process (351) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (582) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (678) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (16547) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (16550) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (16553) terminated with status 1
init: upstart-file-bridge main process ended, respawning
usb 3-7: new high-speed USB device number 7 using xhci_hcd
usb 3-7: New USB device found, idVendor=03f0, idProduct=5307
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: v165w
usb 3-7: Manufacturer: HP
usb 3-7: SerialNumber: AA00000000000700
usb 3-7: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-7: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi8 : usb-storage 3-7:1.0
WARNING! power/level is deprecated; use power/control instead
scsi 8:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI removable disk
systemd-hostnamed[17283]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
usb 3-7: USB disconnect, device number 7
usb 3-8: new high-speed USB device number 8 using xhci_hcd
usb 3-8: New USB device found, idVendor=03f0, idProduct=5307
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: v165w
usb 3-8: Manufacturer: HP
usb 3-8: SerialNumber: AA00000000000700
usb 3-8: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-8: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi9 : usb-storage 3-8:1.0
scsi 9:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] Attached SCSI removable disk
usb 3-8: USB disconnect, device number 8
usb 3-8: new high-speed USB device number 9 using xhci_hcd
usb 3-8: New USB device found, idVendor=03f0, idProduct=5307
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: v165w
usb 3-8: Manufacturer: HP
usb 3-8: SerialNumber: AA00000000000700
usb 3-8: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-8: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi10 : usb-storage 3-8:1.0
scsi 10:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdb] No Caching mode page found
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] No Caching mode page found
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 10:0:0:0: [sdb] No Caching mode page found
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Attached SCSI removable disk
usb 3-8: USB disconnect, device number 9
usb 3-7: new high-speed USB device number 10 using xhci_hcd
usb 3-7: New USB device found, idVendor=03f0, idProduct=5307
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: v165w
usb 3-7: Manufacturer: HP
usb 3-7: SerialNumber: AA00000000000700
usb 3-7: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-7: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi11 : usb-storage 3-7:1.0
scsi 11:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Attached SCSI removable disk
usb 3-7: USB disconnect, device number 10
usb 3-8: new high-speed USB device number 11 using xhci_hcd
usb 3-8: New USB device found, idVendor=03f0, idProduct=5307
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: v165w
usb 3-8: Manufacturer: HP
usb 3-8: SerialNumber: AA00000000000700
usb 3-8: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-8: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi12 : usb-storage 3-8:1.0
scsi 12:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 12:0:0:0: Attached scsi generic sg2 type 0
sd 12:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 12:0:0:0: [sdb] Write Protect is off
sd 12:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 12:0:0:0: [sdb] No Caching mode page found
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sd 12:0:0:0: [sdb] No Caching mode page found
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 12:0:0:0: [sdb] No Caching mode page found
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sd 12:0:0:0: [sdb] Attached SCSI removable disk
usb 3-8: USB disconnect, device number 11
usb 3-7: new high-speed USB device number 12 using xhci_hcd
usb 3-7: New USB device found, idVendor=1000, idProduct=1000
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: Mass storage
usb 3-7: Manufacturer: Generic
usb 3-7: SerialNumber: sn6044603234
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi13 : usb-storage 3-7:1.0
scsi 13:0:0:0: Direct-Access Generic Flash Disk 1.68 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg2 type 0
sd 13:0:0:0: [sdb] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
sd 13:0:0:0: [sdb] Write Protect is off
sd 13:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 13:0:0:0: [sdb] No Caching mode page found
sd 13:0:0:0: [sdb] Assuming drive cache: write through
sd 13:0:0:0: [sdb] No Caching mode page found
sd 13:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 13:0:0:0: [sdb] No Caching mode page found
sd 13:0:0:0: [sdb] Assuming drive cache: write through
sd 13:0:0:0: [sdb] Attached SCSI removable disk
usb 3-7: USB disconnect, device number 12
FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
usb 3-7: new high-speed USB device number 13 using xhci_hcd
usb 3-7: New USB device found, idVendor=1908, idProduct=1319
usb 3-7: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 3-7: Product: AX216BL
usb 3-7: Manufacturer: BUILDWIN
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi14 : usb-storage 3-7:1.0
usb 3-7: USB disconnect, device number 13
systemd-hostnamed[16126]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[16705]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[9826]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-7: new high-speed USB device number 14 using xhci_hcd
usb 3-7: New USB device found, idVendor=058f, idProduct=6387
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-7: Product: Mass Storage
usb 3-7: Manufacturer: Generic
usb 3-7: SerialNumber: B11D5632
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi15 : usb-storage 3-7:1.0
scsi 15:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg2 type 0
sd 15:0:0:0: [sdb] 7829504 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 15:0:0:0: [sdb] Write Protect is off
sd 15:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 15:0:0:0: [sdb] No Caching mode page found
sd 15:0:0:0: [sdb] Assuming drive cache: write through
sd 15:0:0:0: [sdb] No Caching mode page found
sd 15:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb4
sd 15:0:0:0: [sdb] No Caching mode page found
sd 15:0:0:0: [sdb] Assuming drive cache: write through
sd 15:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 3-8: new high-speed USB device number 15 using xhci_hcd
usb 3-8: New USB device found, idVendor=03f0, idProduct=5307
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: v165w
usb 3-8: Manufacturer: HP
usb 3-8: SerialNumber: AA00000000000700
usb 3-8: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-8: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi16 : usb-storage 3-8:1.0
scsi 16:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 16:0:0:0: Attached scsi generic sg7 type 0
sd 16:0:0:0: [sdg] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 16:0:0:0: [sdg] Write Protect is off
sd 16:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 16:0:0:0: [sdg] No Caching mode page found
sd 16:0:0:0: [sdg] Assuming drive cache: write through
sd 16:0:0:0: [sdg] No Caching mode page found
sd 16:0:0:0: [sdg] Assuming drive cache: write through
sdg:
sd 16:0:0:0: [sdg] No Caching mode page found
sd 16:0:0:0: [sdg] Assuming drive cache: write through
sd 16:0:0:0: [sdg] Attached SCSI removable disk
systemd-hostnamed[11399]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sdg: detected capacity change from 4009754624 to 0
usb 3-8: USB disconnect, device number 15
usb 3-8: new high-speed USB device number 16 using xhci_hcd
usb 3-8: New USB device found, idVendor=03f0, idProduct=5307
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: v165w
usb 3-8: Manufacturer: HP
usb 3-8: SerialNumber: AA00000000000700
usb 3-8: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-8: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 3-8:1.0: USB Mass Storage device detected
scsi17 : usb-storage 3-8:1.0
scsi 17:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
sd 17:0:0:0: Attached scsi generic sg7 type 0
sd 17:0:0:0: [sdg] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 17:0:0:0: [sdg] Write Protect is off
sd 17:0:0:0: [sdg] Mode Sense: 43 00 00 00
sd 17:0:0:0: [sdg] No Caching mode page found
sd 17:0:0:0: [sdg] Assuming drive cache: write through
sd 17:0:0:0: [sdg] No Caching mode page found
sd 17:0:0:0: [sdg] Assuming drive cache: write through
sdg:
sd 17:0:0:0: [sdg] No Caching mode page found
sd 17:0:0:0: [sdg] Assuming drive cache: write through
sd 17:0:0:0: [sdg] Attached SCSI removable disk