dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c994dfff] usable
BIOS-e820: [mem 0x00000000c994e000-0x00000000c9954fff] ACPI NVS
BIOS-e820: [mem 0x00000000c9955000-0x00000000ca3e5fff] usable
BIOS-e820: [mem 0x00000000ca3e6000-0x00000000ca8d2fff] reserved
BIOS-e820: [mem 0x00000000ca8d3000-0x00000000db3c6fff] usable
BIOS-e820: [mem 0x00000000db3c7000-0x00000000db454fff] reserved
BIOS-e820: [mem 0x00000000db455000-0x00000000db4bdfff] usable
BIOS-e820: [mem 0x00000000db4be000-0x00000000db5fcfff] ACPI NVS
BIOS-e820: [mem 0x00000000db5fd000-0x00000000dbffefff] reserved
BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z97-HD3/Z97-HD3, BIOS F4 05/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DE000000 mask 7FFE000000 uncachable
4 base 00DD000000 mask 7FFF000000 uncachable
5 base 021FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3552MB, range: 32MB, type UC
reg 4, base: 3536MB, range: 16MB, type UC
reg 5, base: 8702MB, range: 2MB, type UC
total RAM covered: 8142M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3536MB, range: 16MB, type UC
reg 4, base: 3552MB, range: 32MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8702MB, range: 2MB, type UC
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[mem 0x21fc00000-0x21fdfffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fbfffff]
[mem 0x21c000000-0x21fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc994dfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc97fffff] page 2M
[mem 0xc9800000-0xc994dfff] page 4k
init_memory_mapping: [mem 0xc9955000-0xca3e5fff]
[mem 0xc9955000-0xc99fffff] page 4k
[mem 0xc9a00000-0xca1fffff] page 2M
[mem 0xca200000-0xca3e5fff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0xca8d3000-0xdb3c6fff]
[mem 0xca8d3000-0xca9fffff] page 4k
[mem 0xcaa00000-0xdb1fffff] page 2M
[mem 0xdb200000-0xdb3c6fff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xdb455000-0xdb4bdfff]
[mem 0xdb455000-0xdb4bdfff] page 4k
init_memory_mapping: [mem 0xdbfff000-0xdbffffff]
[mem 0xdbfff000-0xdbffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x348a2000-0x36448fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000db5c2080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000db5d2870 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000db5c2190 0106DD (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 00000000db5fb080 000040
ACPI: APIC 00000000db5d2980 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000db5d29f8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000db5d2a40 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 00000000db5d3630 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000db5d3b70 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 00000000db5d46e8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000db5d4728 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000db5d4760 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000db5d4ad0 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: DMAR 00000000db5da630 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
Initmem setup node 0 [mem 0x00000000-0x21fdfffff]
NODE_DATA [mem 0x21fdf6000-0x21fdfafff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217400000-ffff88021f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xc994dfff]
node 0: [mem 0xc9955000-0xca3e5fff]
node 0: [mem 0xca8d3000-0xdb3c6fff]
node 0: [mem 0xdb455000-0xdb4bdfff]
node 0: [mem 0xdbfff000-0xdbffffff]
node 0: [mem 0x100000000-0x21fdfffff]
On node 0 totalpages: 2075865
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13949 pages used for memmap
DMA32 zone: 892733 pages, LIFO batch:31
Normal zone: 18424 pages used for memmap
Normal zone: 1179136 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc994e000-0xc9954fff]
PM: Registered nosave memory: [mem 0xca3e6000-0xca8d2fff]
PM: Registered nosave memory: [mem 0xdb3c7000-0xdb454fff]
PM: Registered nosave memory: [mem 0xdb4be000-0xdb5fcfff]
PM: Registered nosave memory: [mem 0xdb5fd000-0xdbffefff]
PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021fa00000 s86400 r8192 d24192 u524288
pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043407
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8060896K/8303460K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 242564K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3100.026 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.05 BogoMIPS (lpj=12400104)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000dbe8c000 end: 0x000000dbe9afff
dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24800.20 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc994e000-0xc9954fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdb4be000-0xdb5fcfff] (1306624 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:22:35, date: 12/06/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: SSDT 00000000db424c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000db424618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000db423d98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8c9e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e19000-0xf7e197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e18000-0xf7e180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc994e000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca3e6000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdb3c7000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb4be000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28316K (ffff8800348a2000 - ffff880036449000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd73c7000-0xdb3c7000] (64MB) mapped at [ffff8800d73c7000-ffff8800db3c6fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1417879355.548:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15799
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:899:385
usb usb3: hash matches
thermal cooling_device0: hash matches
rtc_cmos 00:06: setting system clock to 2014-12-06 15:22:36 UTC (1417879356)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 47 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 74:d4:35:bb:23:d0, XID 0c900800 IRQ 47
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xa impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
r8169 0000:05:00.0: irq 49 for MSI/MSI-X
r8169 0000:05:00.0 eth1: RTL8168d/8111d at 0xffffc90004c8e000, 00:0a:cd:21:20:72, XID 083000c0 IRQ 49
r8169 0000:05:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19180 irq 48
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7e19000 port 0xf7e19280 irq 48
ata5: DUMMY
ata6: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 130000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 50 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:17: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133
ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
random: lvm urandom read with 38 bits of entropy available
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
bio: create slab at 1
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=062a, idProduct=0252
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB WheelMouse
usb 3-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB WheelMouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input7
hid-generic 0003:062A:0252.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB WheelMouse ] on usb-0000:00:14.0-3/input0
tsc: Refined TSC clocksource calibration: 3099.997 MHz
usb 3-5: new full-speed USB device number 3 using xhci_hcd
usb 3-5: New USB device found, idVendor=0e8f, idProduct=0016
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Hub
usb 3-5: Manufacturer: GASIA Semi.
usb 3-5: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 4 ports detected
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-9: new low-speed USB device number 4 using xhci_hcd
random: nonblocking pool is initialized
usb 3-9: New USB device found, idVendor=05fe, idProduct=1010
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: WIT 122-UFS V2.03
usb 3-9: Manufacturer: WIT Electron Company
usb 3-9: ep 0x81 - rounding interval to 16 microframes, ep desc says 24 microframes
input: WIT Electron Company WIT 122-UFS V2.03 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input8
hid-generic 0003:05FE:1010.0002: input,hidraw1: USB HID v1.10 Keyboard [WIT Electron Company WIT 122-UFS V2.03] on usb-0000:00:14.0-9/input0
usb 3-10: new high-speed USB device number 5 using xhci_hcd
usb 3-10: New USB device found, idVendor=0ac8, idProduct=c315
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: HP 3-MegaPixel Webcam GX607AA
usb 3-10: Manufacturer: Vimicro Corp.
usb 3-5.1: new full-speed USB device number 6 using xhci_hcd
usb 3-5.1: not running at top speed; connect to a high speed hub
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-5.1: New USB device found, idVendor=1307, idProduct=0310
usb 3-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5.1: Product: Mass Storage Device
usb 3-5.1: Manufacturer: Generic
usb 3-5.1: SerialNumber: 00000000000006
Switched to clocksource tsc
usb 3-5.2: new low-speed USB device number 7 using xhci_hcd
usb 3-5.2: New USB device found, idVendor=04f3, idProduct=0103
usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-5.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-5.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input9
hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-5.2/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.2/3-5.2:1.1/input/input10
hid-generic 0003:04F3:0103.0004: input,hidraw3: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-5.2/input1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[410]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
SKU: Nid=0x1d sku_cfg=0x4045e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4045e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
systemd-udevd[441]: renamed network interface eth0 to eth2
lp0: using parport0 (interrupt-driven).
device-mapper: multipath: version 1.6.0 loaded
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HP 3-MegaPixel Webcam GX607AA (0ac8:c315)
input: HP 3-MegaPixel Webcam GX607AA as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb-storage 3-5.1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-5.1:1.0
usbcore: registered new interface driver usb-storage
init: failsafe main process (840) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (930) killed by HUP signal
init: cups main process ended, respawning
scsi 6:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
init: samba-ad-dc main process (977) terminated with status 1
r8169 0000:02:00.0 eth2: link down
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
r8169 0000:05:00.0 eth1: link down
r8169 0000:05:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1e1 offMax=0x2cf5
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1472) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
vboxpci: IOMMU not found (not registered)
ata2.00: exception Emask 0x10 SAct 0x3e10 SErr 0x400100 action 0x6 frozen
ata2.00: irq_stat 0x08000000, interface fatal error
ata2: SError: { UnrecovData Handshk }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:20:10:41:0f/00:00:5d:00:00/40 tag 4 ncq 8192 in
res 40/00:68:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:48:10:0c:04/04:00:3a:00:00/40 tag 9 ncq 524288 out
res 40/00:68:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:50:10:10:04/04:00:3a:00:00/40 tag 10 ncq 524288 out
res 40/00:68:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:58:10:14:04/04:00:3a:00:00/40 tag 11 ncq 524288 out
res 40/00:68:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:60:10:18:04/04:00:3a:00:00/40 tag 12 ncq 524288 out
res 40/00:68:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/18:68:10:1c:04/03:00:3a:00:00/40 tag 13 ncq 405504 out
res 40/00:68:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x10 SAct 0xfc000 SErr 0x400100 action 0x6 frozen
ata2.00: irq_stat 0x08000000, interface fatal error
ata2: SError: { UnrecovData Handshk }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/18:70:10:1c:04/03:00:3a:00:00/40 tag 14 ncq 405504 out
res 40/00:98:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:78:10:18:04/04:00:3a:00:00/40 tag 15 ncq 524288 out
res 40/00:98:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:80:10:14:04/04:00:3a:00:00/40 tag 16 ncq 524288 out
res 40/00:98:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:88:10:10:04/04:00:3a:00:00/40 tag 17 ncq 524288 out
res 40/00:98:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:90:10:0c:04/04:00:3a:00:00/40 tag 18 ncq 524288 out
res 40/00:98:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:98:10:41:0f/00:00:5d:00:00/40 tag 19 ncq 8192 in
res 40/00:98:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x10 SAct 0x3d00000 SErr 0x400100 action 0x6 frozen
ata2.00: irq_stat 0x08000000, interface fatal error
ata2: SError: { UnrecovData Handshk }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:a0:10:41:0f/00:00:5d:00:00/40 tag 20 ncq 8192 in
res 40/00:c8:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:b0:10:10:04/04:00:3a:00:00/40 tag 22 ncq 524288 out
res 40/00:c8:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:b8:10:14:04/04:00:3a:00:00/40 tag 23 ncq 524288 out
res 40/00:c8:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:c0:10:18:04/04:00:3a:00:00/40 tag 24 ncq 524288 out
res 40/00:c8:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/18:c8:10:1c:04/03:00:3a:00:00/40 tag 25 ncq 405504 out
res 40/00:c8:10:1c:04/00:00:3a:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2: limiting SATA link speed to 3.0 Gbps
ata2.00: exception Emask 0x10 SAct 0x7c000000 SErr 0x400100 action 0x6 frozen
ata2.00: irq_stat 0x08000000, interface fatal error
ata2: SError: { UnrecovData Handshk }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/18:d0:10:1c:04/03:00:3a:00:00/40 tag 26 ncq 405504 out
res 40/00:f0:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:d8:10:18:04/04:00:3a:00:00/40 tag 27 ncq 524288 out
res 40/00:f0:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:e0:10:14:04/04:00:3a:00:00/40 tag 28 ncq 524288 out
res 40/00:f0:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:e8:10:10:04/04:00:3a:00:00/40 tag 29 ncq 524288 out
res 40/00:f0:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/10:f0:10:41:0f/00:00:5d:00:00/40 tag 30 ncq 8192 in
res 40/00:f0:10:41:0f/00:00:5d:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
r8169 0000:05:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata2.00: configured for UDMA/133
ata2: EH complete
init: plymouth-stop pre-start process (1543) terminated with status 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000