dmesg - ssd_ubuntu

Return To ssd_ubuntu System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic.efi.signed root=/dev/mapper/brutus--vg-root ro crashkernel=128M
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000be111fff] usable
BIOS-e820: [mem 0x00000000be112000-0x00000000be4e1fff] reserved
BIOS-e820: [mem 0x00000000be4e2000-0x00000000be8cefff] ACPI NVS
BIOS-e820: [mem 0x00000000be8cf000-0x00000000bee1ffff] reserved
BIOS-e820: [mem 0x00000000bee20000-0x00000000bee5cfff] type 20
BIOS-e820: [mem 0x00000000bee5d000-0x00000000bee5dfff] usable
BIOS-e820: [mem 0x00000000bee5e000-0x00000000bf063fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf064000-0x00000000bf462fff] usable
BIOS-e820: [mem 0x00000000bf463000-0x00000000bf7f2fff] reserved
BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xbe8c0000  ACPI 2.0=0xbe8c0000  SMBIOS=0xf04c0  MPS=0xfd4f0 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000077000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x0000000000077000-0x0000000000078000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000078000-0x00000000000a0000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002501000) (21MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000002501000-0x00000000359a4000) (820MB)
efi: mem07: type=2, attr=0xf, range=[0x00000000359a4000-0x0000000036cca000) (19MB)
efi: mem08: type=7, attr=0xf, range=[0x0000000036cca000-0x00000000835b4000) (1224MB)
efi: mem09: type=2, attr=0xf, range=[0x00000000835b4000-0x00000000b0246000) (716MB)
efi: mem10: type=7, attr=0xf, range=[0x00000000b0246000-0x00000000b024c000) (0MB)
efi: mem11: type=2, attr=0xf, range=[0x00000000b024c000-0x00000000b0422000) (1MB)
efi: mem12: type=1, attr=0xf, range=[0x00000000b0422000-0x00000000b0556000) (1MB)
efi: mem13: type=7, attr=0xf, range=[0x00000000b0556000-0x00000000b315f000) (44MB)
efi: mem14: type=4, attr=0xf, range=[0x00000000b315f000-0x00000000b3320000) (1MB)
efi: mem15: type=7, attr=0xf, range=[0x00000000b3320000-0x00000000b3335000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000b3335000-0x00000000b33bd000) (0MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000b33bd000-0x00000000b33bf000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000b33bf000-0x00000000b33d0000) (0MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000b33d0000-0x00000000b35a4000) (1MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000b35a4000-0x00000000bdad7000) (165MB)
efi: mem21: type=7, attr=0xf, range=[0x00000000bdad7000-0x00000000bdedd000) (4MB)
efi: mem22: type=2, attr=0xf, range=[0x00000000bdedd000-0x00000000bdee7000) (0MB)
efi: mem23: type=3, attr=0xf, range=[0x00000000bdee7000-0x00000000be112000) (2MB)
efi: mem24: type=0, attr=0xf, range=[0x00000000be112000-0x00000000be1d5000) (0MB)
efi: mem25: type=0, attr=0xf, range=[0x00000000be1d5000-0x00000000be4e2000) (3MB)
efi: mem26: type=10, attr=0xf, range=[0x00000000be4e2000-0x00000000be7b1000) (2MB)
efi: mem27: type=10, attr=0xf, range=[0x00000000be7b1000-0x00000000be8cf000) (1MB)
efi: mem28: type=6, attr=0x800000000000000f, range=[0x00000000be8cf000-0x00000000bed6b000) (4MB)
efi: mem29: type=6, attr=0x800000000000000f, range=[0x00000000bed6b000-0x00000000bed80000) (0MB)
efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000bed80000-0x00000000bed84000) (0MB)
efi: mem31: type=6, attr=0x800000000000000f, range=[0x00000000bed84000-0x00000000bee20000) (0MB)
efi: mem32: type=5, attr=0x800000000000000f, range=[0x00000000bee20000-0x00000000bee2c000) (0MB)
efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000bee2c000-0x00000000bee5d000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000bee5d000-0x00000000bee5e000) (0MB)
efi: mem35: type=10, attr=0xf, range=[0x00000000bee5e000-0x00000000bf064000) (2MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000bf064000-0x00000000bf1b3000) (1MB)
efi: mem37: type=3, attr=0xf, range=[0x00000000bf1b3000-0x00000000bf451000) (2MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000bf451000-0x00000000bf452000) (0MB)
efi: mem39: type=3, attr=0xf, range=[0x00000000bf452000-0x00000000bf454000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000bf454000-0x00000000bf462000) (0MB)
efi: mem41: type=3, attr=0xf, range=[0x00000000bf462000-0x00000000bf463000) (0MB)
efi: mem42: type=6, attr=0x800000000000000f, range=[0x00000000bf463000-0x00000000bf7f3000) (3MB)
efi: mem43: type=4, attr=0xf, range=[0x00000000bf7f3000-0x00000000bf800000) (0MB)
efi: mem44: type=7, attr=0xf, range=[0x0000000100001000-0x0000000440000000) (13311MB)
efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Pro3 R2.0, BIOS P1.50 10/02/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CEFFF write-protect
  CF000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000BF800000 mask FFFFFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000440000000 aka 17408M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff8800000fd8e0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
 [mem 0x43fe00000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
 [mem 0x43c000000-0x43fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x43bffffff]
 [mem 0x400000000-0x43bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbe111fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xbdffffff] page 2M
 [mem 0xbe000000-0xbe111fff] page 4k
init_memory_mapping: [mem 0xbee5d000-0xbee5dfff]
 [mem 0xbee5d000-0xbee5dfff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbf064000-0xbf462fff]
 [mem 0xbf064000-0xbf1fffff] page 4k
 [mem 0xbf200000-0xbf3fffff] page 2M
 [mem 0xbf400000-0xbf462fff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xbf7f3000-0xbf7fffff]
 [mem 0xbf7f3000-0xbf7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x3ffffffff]
 [mem 0x100001000-0x1001fffff] page 4k
 [mem 0x100200000-0x13fffffff] page 2M
 [mem 0x140000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x359a4000-0x36cc9fff]
ACPI: RSDP 00000000be8c0000 000024 (v02 ALASKA)
ACPI: XSDT 00000000be8c0068 000054 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000be8c6038 00010C (v05 ALASKA    A M I 01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000be8c0158 005EDF (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 00000000be8c8080 000040
ACPI: APIC 00000000be8c6148 00009E (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 00000000be8c61e8 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 00000000be8c6230 00003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
ACPI: AAFT 00000000be8c6270 000062 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: HPET 00000000be8c62d8 000038 (v01 ALASKA    A M I 01072009 AMI  00000005)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
  NODE_DATA [mem 0x43fff6000-0x43fffafff]
Reserving 128MB of memory at 720MB for crashkernel (System RAM: 16356MB)
 [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009ffff]
  node   0: [mem 0x00100000-0xbe111fff]
  node   0: [mem 0xbee5d000-0xbee5dfff]
  node   0: [mem 0xbf064000-0xbf462fff]
  node   0: [mem 0xbf7f3000-0xbf7fffff]
  node   0: [mem 0x100001000-0x43fffffff]
On node 0 totalpages: 4187325
  DMA zone: 64 pages used for memmap
  DMA zone: 24 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 12117 pages used for memmap
  DMA32 zone: 775455 pages, LIFO batch:31
  Normal zone: 53248 pages used for memmap
  Normal zone: 3407871 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbe112000-0xbe4e1fff]
PM: Registered nosave memory: [mem 0xbe4e2000-0xbe8cefff]
PM: Registered nosave memory: [mem 0xbe8cf000-0xbee1ffff]
PM: Registered nosave memory: [mem 0xbee20000-0xbee5cfff]
PM: Registered nosave memory: [mem 0xbee5e000-0xbf063fff]
PM: Registered nosave memory: [mem 0xbf463000-0xbf7f2fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4121872
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic.efi.signed root=/dev/mapper/brutus--vg-root ro crashkernel=128M
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ f64a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ a8000000
PM: Registered nosave memory: [mem 0xa8000000-0xabffffff]
Memory: 16009352K/16749300K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 739948K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1288 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3492.469 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.93 BogoMIPS (lpj=13969876)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55879.50 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbe4e2000-0xbe8cefff] (4116480 bytes)
PM: Registering ACPI NVS region [mem 0xbee5e000-0xbf063fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:47:21, date: 12/05/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xfd207000-0xfd2073ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfd206000-0xfd206fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfd205000-0xfd2050ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfd204000-0xfd204fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfd203000-0xfd2030ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfd202000-0xfd202fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfd201000-0xfd201fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfd200000-0xfd2000ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:06e0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfd0fffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfd100000-0xfd107fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.3:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xbe112000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbee5e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf463000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c51] has been reserved
system 00:01: [io  0x0c52] has been reserved
system 00:01: [io  0x0c6c] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cd5] has been reserved
system 00:01: [io  0x0cd6-0x0cd7] has been reserved
system 00:01: [io  0x0cd8-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x089f] could not be reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [io  0x0900-0x090f] has been reserved
system 00:01: [io  0x0910-0x091f] has been reserved
system 00:01: [io  0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfd0fffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0:   bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.3:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfd0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:03: resource 4 [io  0x0000-0x03af]
pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19608K (ffff8800359a4000 - ffff880036cca000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ a8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06000817
microcode: CPU1: patch_level=0x06000817
microcode: CPU2: patch_level=0x06000817
microcode: CPU3: patch_level=0x06000817
microcode: CPU4: patch_level=0x06000817
microcode: CPU5: patch_level=0x06000817
microcode: CPU6: patch_level=0x06000817
microcode: CPU7: patch_level=0x06000817
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1417805241.824:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31782
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xfb000000, mapped to 0xffffc90011b80000, using 1216k, total 1216k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfd205000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfd203000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfd200000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfd206000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfd204000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfd202000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfd201000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
regulator-dummy: disabling
  Magic number: 10:557:796
rtc_cmos 00:04: setting system clock to 2014-12-05 18:47:22 UTC (1417805242)
powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[146]: starting version 204
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 73 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018f8000, bc:5f:f4:e8:e1:a8, XID 0c900800 IRQ 73
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfd207000 port 0xfd207280 irq 19
systemd-udevd[151]: renamed network interface eth0 to p17p1
ata1.00: ATA-8: KINGSTON SV300S37A120G, 583ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 583A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
random: lvm urandom read with 23 bits of entropy available
bio: create slab  at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 3492.432 MHz
init: plymouth-upstart-bridge main process (243) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (253) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (256) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 16748540k swap on /dev/mapper/brutus--vg-swap_1.  Priority:-1 extents:1 across:16748540k SSFS
IPv6: ADDRCONF(NETDEV_UP): p17p1: link is not ready
systemd-udevd[373]: starting version 204
lp: driver loaded but no devices found
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc900018feb00). heartbeat=60 sec (nowayout=0)
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
checking generic (fb000000 130000) vs hw (c0000000 10000000)
checking generic (fb000000 130000) vs hw (fa000000 2000000)
fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] hdmi device  not found 1 0 1
nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x298000a2
nouveau  [  DEVICE][0000:01:00.0] Chipset: G98 (NV98)
nouveau  [  DEVICE][0000:01:00.0] Family : NV50
nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
type=1400 audit(1417805243.417:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=441 comm="apparmor_parser"
type=1400 audit(1417805243.417:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
type=1400 audit(1417805243.417:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
type=1400 audit(1417805243.417:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
type=1400 audit(1417805243.417:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
type=1400 audit(1417805243.417:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
nouveau  [   VBIOS][0000:01:00.0] BIT signature found
nouveau  [   VBIOS][0000:01:00.0] version 62.98.1b.00.11
nouveau 0000:01:00.0: irq 74 for MSI/MSI-X
nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
nouveau  [     PFB][0000:01:00.0] RAM type: DDR2
nouveau  [     PFB][0000:01:00.0] RAM size: 256 MiB
nouveau  [     PFB][0000:01:00.0]    ZCOMP: 960 tags
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
r8169 0000:05:00.0 p17p1: link down
IPv6: ADDRCONF(NETDEV_UP): p17p1: link is not ready
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
Switched to clocksource tsc
nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
nouveau  [     CLK][0000:01:00.0] 0f: core 540 MHz shader 1300 MHz memory 500 MHz
nouveau  [     CLK][0000:01:00.0] --: core 540 MHz shader 1300 MHz memory 499 MHz
[TTM] Zone  kernel: Available graphics memory: 8137868 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau  [     DRM] VRAM: 256 MiB
nouveau  [     DRM] GART: 1048576 MiB
nouveau  [     DRM] TMDS table version 2.0
nouveau  [     DRM] DCB version 4.0
nouveau  [     DRM] DCB outp 00: 02000300 00000028
nouveau  [     DRM] DCB outp 01: 01000302 00020010
nouveau  [     DRM] DCB outp 02: 04011310 00000028
nouveau  [     DRM] DCB outp 03: 02011312 00020010
nouveau  [     DRM] DCB conn 00: 00001030
nouveau  [     DRM] DCB conn 01: 00002130
nouveau  [     DRM] DCB conn 05: 00000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau  [     DRM] MM: using M2MF for buffer copies
nouveau  [     DRM] allocated 1280x1024 fb: 0x60000, bo ffff8804256d0c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
r8169 0000:05:00.0 p17p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p17p1: link becomes ready
random: nonblocking pool is initialized
init: failsafe main process (640) killed by TERM signal
type=1400 audit(1417805249.900:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=964 comm="apparmor_parser"
type=1400 audit(1417805249.900:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=962 comm="apparmor_parser"
type=1400 audit(1417805249.900:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=962 comm="apparmor_parser"
type=1400 audit(1417805249.900:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=962 comm="apparmor_parser"
type=1400 audit(1417805249.900:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=962 comm="apparmor_parser"
type=1400 audit(1417805249.900:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=962 comm="apparmor_parser"
type=1400 audit(1417805249.900:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=962 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: automatically using best checksumming function:
   avx       :  4314.000 MB/sec
raid6: sse2x1    6204 MB/s
raid6: sse2x2   10076 MB/s
raid6: sse2x4   11500 MB/s
raid6: using algorithm sse2x4 (11500 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab  at 2
Btrfs loaded

Return To ssd_ubuntu System Information