dmesg - bench.x264
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfecffff] usable
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfed0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed1000-0x00000000cfedffff] ACPI data
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. G1.Assassin/G1.Assassin, BIOS F2 01/11/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 300000000 mask FC0000000 write-back
6 base 330000000 mask FF0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: update [mem 0x330000000-0x33fffffff] usable ==> reserved
e820: last_pfn = 0xcfed0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5c10-0x000f5c1f] mapped at [ffff8800000f5c10]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af2000, 0x01af2fff] PGTABLE
BRK [0x01af3000, 0x01af3fff] PGTABLE
BRK [0x01af4000, 0x01af4fff] PGTABLE
init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
[mem 0x32fe00000-0x32fffffff] page 2M
BRK [0x01af5000, 0x01af5fff] PGTABLE
init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
[mem 0x32c000000-0x32fdfffff] page 2M
init_memory_mapping: [mem 0x300000000-0x32bffffff]
[mem 0x300000000-0x32bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfecffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfecffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
RAMDISK: [mem 0x362f2000-0x37170fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7370 000014 (v00 GBT )
ACPI: RSDT 0x00000000CFED1040 000044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFED10C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFED1180 00391C (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000CFED0000 000040
ACPI: HPET 0x00000000CFED4C80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFED4D00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000CFED4D40 0004D0 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000CFED5210 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CFED5280 000DA2 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CFED4B00 00012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CFED6040 004224 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
Initmem setup node 0 [mem 0x00000000-0x32fffffff]
NODE_DATA [mem 0x32fff9000-0x32fffdfff]
[ffffea0000000000-ffffea000b3fffff] PMD -> [ffff880323600000-ffff88032dffffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x32fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfecffff]
node 0: [mem 0x100000000-0x32fffffff]
On node 0 totalpages: 3145326
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11588 pages used for memmap
DMA32 zone: 847568 pages, LIFO batch:31
Normal zone: 31360 pages used for memmap
Normal zone: 2293760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfed0000-0xcfed0fff]
PM: Registered nosave memory: [mem 0xcfed1000-0xcfedffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88032fc00000 s85824 r8192 d20672 u131072
pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3102301
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12312944K/12581304K available (5191K kernel code, 942K rwdata, 1824K rodata, 1200K init, 840K bss, 268360K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:33024 nr_irqs:808 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3198.018 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6396.03 BogoMIPS (lpj=12792072)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
ftrace: allocating 21551 entries in 85 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 970 @ 3.20GHz (fam: 06, model: 2c, stepping: 02)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (76752.43 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfed0000-0xcfed0fff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xf900-0xf90f]
pci 0000:00:1f.2: reg 0x24: [io 0xf800-0xf80f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf600-0xf607]
pci 0000:00:1f.5: reg 0x14: [io 0xf500-0xf503]
pci 0000:00:1f.5: reg 0x18: [io 0xf400-0xf407]
pci 0000:00:1f.5: reg 0x1c: [io 0xf300-0xf303]
pci 0000:00:1f.5: reg 0x20: [io 0xf200-0xf20f]
pci 0000:00:1f.5: reg 0x24: [io 0xf100-0xf10f]
pci 0000:01:00.0: [1b4b:918a] type 00 class 0x01018f
pci 0000:01:00.0: reg 0x10: [io 0xbf00-0xbf07]
pci 0000:01:00.0: reg 0x14: [io 0xbe00-0xbe03]
pci 0000:01:00.0: reg 0x18: [io 0xbd00-0xbd07]
pci 0000:01:00.0: reg 0x1c: [io 0xbc00-0xbc03]
pci 0000:01:00.0: reg 0x20: [io 0xbb00-0xbb0f]
pci 0000:01:00.0: reg 0x24: [mem 0xfbeff000-0xfbeff1ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfbdfe000-0xfbdfffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:03:00.0: [1002:6898] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xfbcc0000-0xfbcdffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0xee00-0xeeff]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: [1002:aa50] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: [1002:6898] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 0x18: [mem 0xfbac0000-0xfbadffff 64bit]
pci 0000:04:00.0: reg 0x20: [io 0xde00-0xdeff]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.1: [1002:aa50] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfbafc000-0xfbafffff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1102:000b] type 00 class 0x040300
pci 0000:06:00.0: reg 0x10: [mem 0xfaff0000-0xfaffffff 64bit]
pci 0000:06:00.0: reg 0x18: [mem 0xfac00000-0xfadfffff 64bit]
pci 0000:06:00.0: reg 0x20: [mem 0xf9000000-0xf9ffffff 64bit]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:07:00.0: [1186:4300] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:07:00.0: reg 0x14: [mem 0xfbbff000-0xfbbff0ff]
pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
vgaarb: bridge control possible 0000:03:00.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c71] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfed0000-0xcfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x05ff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:04: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:04: [mem 0xcfed0000-0xcfedffff] could not be reserved
system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:04: [mem 0x00100000-0xcfecffff] could not be reserved
system 00:04: [mem 0xcfee0000-0xcfefffff] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: [mem 0x000e0000-0x000effff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe0ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfba00000-0xfba1ffff pref]
pci 0000:00:05.0: PCI bridge to [bus 04]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xf9000000-0xfaffffff]
pci_bus 0000:06: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14844K (ffff8800362f2000 - ffff880037171000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbed0000-0xcfed0000] (64MB) mapped at [ffff8800cbed0000-ffff8800cfecffff]
microcode: CPU0 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU1 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU2 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU3 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU4 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU5 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU6 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU7 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU8 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU9 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU10 sig=0x206c2, pf=0x2, revision=0x13
microcode: CPU11 sig=0x206c2, pf=0x2, revision=0x13
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1416016988.540:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 24077
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: enabling device (0006 -> 0007)
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
ioapic: probe of 0000:00:13.0 failed with error -22
ioapic: probe of 0000:00:15.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2014-11-15 02:03:09 UTC (1416016989)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000)
Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
systemd-udevd[110]: starting version 215
random: systemd-udevd urandom read with 1 bits of entropy available
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0 (unregistered net_device): not PCI Express
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
r8169 0000:07:00.0 eth0: RTL8169sb/8110sb at 0xffffc900018f0000, 00:26:5a:bc:d1:20, XID 10000000 IRQ 16
r8169 0000:07:00.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
uhci_hcd: USB Universal Host Controller Interface driver
libata version 3.00 loaded.
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.7: debug port 1
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1a.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 3.16.0-4-amd64 uhci_hcd
usb usb10: SerialNumber: 0000:00:1d.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 3197.726 MHz
usb 1-3: New USB device found, idVendor=2109, idProduct=3431
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high-speed USB device number 4 using ehci-pci
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-4: New USB device found, idVendor=2109, idProduct=3431
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
ata2.01: ATA-8: ADATA SP900, 5.0.7b, max UDMA/133
ata2.01: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: configured for UDMA/133
scsi 1:0:1:0: Direct-Access ATA ADATA SP900 7b PQ: 0 ANSI: 5
sd 1:0:1:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:1:0: [sda] Write Protect is off
sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:1:0: [sda] Attached SCSI disk
sd 1:0:1:0: Attached scsi generic sg0 type 0
usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
Switched to clocksource tsc
usb 3-1: New USB device found, idVendor=2109, idProduct=0810
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: 4-Port USB 3.0 Hub
usb 3-1: Manufacturer: VIA Labs, Inc.
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 3-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=2109, idProduct=0810
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: 4-Port USB 3.0 Hub
usb 3-2: Manufacturer: VIA Labs, Inc.
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 4-2: new high-speed USB device number 2 using ehci-pci
usb 4-2: New USB device found, idVendor=05e3, idProduct=0727
usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 4-2: Product: USB Storage
usb 4-2: Manufacturer: Generic
usb 4-2: SerialNumber: 000000000250
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi4 : usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
floppy0: no floppy controllers found
work still pending
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 5-1: new full-speed USB device number 2 using uhci_hcd
systemd-udevd[241]: starting version 215
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.23)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[226]: Received request to flush runtime journal from PID 1
usb 5-1: New USB device found, idVendor=1532, idProduct=0007
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: DeathAdder
usb 5-1: Manufacturer: Razer
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
EDAC MC: Ver: 3.0.0
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c70
input: PC Speaker as /devices/platform/pcspkr/input/input1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
usb 10-1: new full-speed USB device number 2 using uhci_hcd
scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0250 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
SSE version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:03:00.1: irq 50 for MSI/MSI-X
snd_hda_intel 0000:04:00.1: irq 51 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CYPRESS 0x1002:0x6898 0x1043:0x0346).
[drm] register mmio base: 0xFBCC0000
[drm] register mmio size: 131072
ATOM BIOS: 6898.12.20.0.5.AS02
radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:03:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 6165086 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CYPRESS Microcode
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/CYPRESS_pfp.bin
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/CYPRESS_me.bin
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/CYPRESS_rlc.bin
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/CYPRESS_smc.bin
[drm] Internal thermal controller with fan control
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.0/0003:1532:0007.0001/input/input4
hid-generic 0003:1532:0007.0001: input,hidraw0: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1a.0-1/input0
[drm] radeon: dpm initialized
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880320155c00
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880320155c0c
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90006f1c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: irq 52 for MSI/MSI-X
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
sd 4:0:0:0: [sdb] 7925760 512-byte logical blocks: (4.05 GB/3.77 GiB)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI removable disk
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:05.0/0000:04:00.1/sound/card2/input6
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD4
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
Adding 2579452k swap on /dev/sda5. Priority:-1 extents:1 across:2579452k SSFS
[drm] fb mappable at 0xE045E000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Console: switching to colour frame buffer device 240x67
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:03:00.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:03:00.0 on minor 0
radeon 0000:04:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (CYPRESS 0x1002:0x6898 0x1043:0x0346).
[drm] register mmio base: 0xFBAC0000
[drm] register mmio size: 131072
ATOM BIOS: 6898.12.20.0.5.AS02
[drm] GPU not posted. posting now...
radeon 0000:04:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:04:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CYPRESS Microcode
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:04:00.0: WB enabled
radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800cb21ec00
radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800cb21ec0c
radeon 0000:04:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000649c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:04:00.0: irq 53 for MSI/MSI-X
radeon 0000:04:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
cfg80211: Calling CRDA to update world regulatory domain
random: nonblocking pool is initialized
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-2
[drm] HPD4
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-2
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
radeon 0000:04:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xD045E000
[drm] vram apper at 0xD0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
radeon 0000:04:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.39.0 20080528 for 0000:04:00.0 on minor 1
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 11737 MBytes.
[fglrx] vendor: 1002 device: 6898 count: 1
[fglrx] vendor: 1002 device: 6898 count: 2
[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[fglrx] ioport: bar 4, base 0xde00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 2 minors
usb 10-1: New USB device found, idVendor=046d, idProduct=0a1f
usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-1: Product: Logitech G930 Headset
usb 10-1: Manufacturer: Logitech
input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.3/0003:046D:0A1F.0002/input/input7
hid-generic 0003:046D:0A1F.0002: input,hiddev0,hidraw1: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:1d.2-1/input3
usbcore: registered new interface driver snd-usb-audio
usb 7-2: new full-speed USB device number 2 using uhci_hcd
usb 7-2: New USB device found, idVendor=1532, idProduct=0109
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Razer Lycosa
usb 7-2: Manufacturer: Razer
input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/0003:1532:0109.0003/input/input8
hid-generic 0003:1532:0109.0003: input,hidraw2: USB HID v1.10 Keyboard [Razer Razer Lycosa] on usb-0000:00:1a.2-2/input0
input: Razer Razer Lycosa as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.1/0003:1532:0109.0004/input/input9
hid-generic 0003:1532:0109.0004: input,hidraw3: USB HID v1.10 Device [Razer Razer Lycosa] on usb-0000:00:1a.2-2/input1
usb 3-2.1: new SuperSpeed USB device number 4 using xhci_hcd
usb 3-2.1: New USB device found, idVendor=05dc, idProduct=b049
usb 3-2.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 3-2.1: Product: USB_3_0 Reader
usb 3-2.1: Manufacturer: Lexar
usb 3-2.1: SerialNumber: 000000002400
usb-storage 3-2.1:1.0: USB Mass Storage device detected
scsi5 : usb-storage 3-2.1:1.0
floppy0: no floppy controllers found
work still pending
scsi 5:0:0:0: Direct-Access Lexar CF USB_3_0 Read LX01 PQ: 0 ANSI: 5
scsi 5:0:0:1: Direct-Access Lexar SD USB_3_0 Read LX01 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:1: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:1: [sdd] Attached SCSI removable disk
r8169 0000:07:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 4-2: USB disconnect, device number 2