dmesg - RAID1

Return To RAID1 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-23-generic (buildd@komainu) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #30-Ubuntu SMP Thu Oct 16 13:17:16 UTC 2014 (Ubuntu 3.16.0-23.30-generic 3.16.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000074f1efff] usable
BIOS-e820: [mem 0x0000000074f1f000-0x0000000075a96fff] reserved
BIOS-e820: [mem 0x0000000075a97000-0x0000000075d1cfff] usable
BIOS-e820: [mem 0x0000000075d1d000-0x00000000768eefff] ACPI NVS
BIOS-e820: [mem 0x00000000768ef000-0x0000000076f60fff] reserved
BIOS-e820: [mem 0x0000000076f61000-0x0000000076fb8fff] type 20
BIOS-e820: [mem 0x0000000076fb9000-0x0000000076ff7fff] usable
BIOS-e820: [mem 0x0000000076ff8000-0x0000000076ff8fff] reserved
BIOS-e820: [mem 0x0000000076ff9000-0x0000000076ffbfff] usable
BIOS-e820: [mem 0x0000000076ffc000-0x0000000076ffcfff] reserved
BIOS-e820: [mem 0x0000000076ffd000-0x0000000076ffdfff] usable
BIOS-e820: [mem 0x0000000076ffe000-0x0000000077083fff] reserved
BIOS-e820: [mem 0x0000000077084000-0x0000000077297fff] usable
BIOS-e820: [mem 0x0000000077298000-0x0000000077ff8fff] reserved
BIOS-e820: [mem 0x0000000077ff9000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0x7612d000  ACPI 2.0=0x7612d000  SMBIOS=0xf0570  MPS=0xfd610 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014f7000) (19MB)
efi: mem05: type=7, attr=0xf, range=[0x00000000014f7000-0x0000000002000000) (11MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033f7000) (19MB)
efi: mem07: type=7, attr=0xf, range=[0x00000000033f7000-0x0000000010000000) (204MB)
efi: mem08: type=3, attr=0xf, range=[0x0000000010000000-0x000000001000b000) (0MB)
efi: mem09: type=7, attr=0xf, range=[0x000000001000b000-0x0000000035862000) (600MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000035862000-0x0000000036c29000) (19MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000036c29000-0x0000000038292000) (22MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000038292000-0x0000000050d6d000) (394MB)
efi: mem13: type=7, attr=0xf, range=[0x0000000050d6d000-0x0000000050d73000) (0MB)
efi: mem14: type=2, attr=0xf, range=[0x0000000050d73000-0x0000000050f49000) (1MB)
efi: mem15: type=1, attr=0xf, range=[0x0000000050f49000-0x000000005107d000) (1MB)
efi: mem16: type=4, attr=0xf, range=[0x000000005107d000-0x0000000062d67000) (284MB)
efi: mem17: type=7, attr=0xf, range=[0x0000000062d67000-0x00000000749ec000) (284MB)
efi: mem18: type=3, attr=0xf, range=[0x00000000749ec000-0x0000000074f1f000) (5MB)
efi: mem19: type=0, attr=0xf, range=[0x0000000074f1f000-0x0000000075a97000) (11MB)
efi: mem20: type=7, attr=0xf, range=[0x0000000075a97000-0x0000000075d13000) (2MB)
efi: mem21: type=2, attr=0xf, range=[0x0000000075d13000-0x0000000075d1d000) (0MB)
efi: mem22: type=10, attr=0xf, range=[0x0000000075d1d000-0x00000000768ef000) (11MB)
efi: mem23: type=6, attr=0x800000000000000f, range=[0x00000000768ef000-0x0000000076f61000) (6MB)
efi: mem24: type=5, attr=0x800000000000000f, range=[0x0000000076f61000-0x0000000076fb9000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x0000000076fb9000-0x0000000076fba000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x0000000076fba000-0x0000000076ff8000) (0MB)
efi: mem27: type=6, attr=0x800000000000000f, range=[0x0000000076ff8000-0x0000000076ff9000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x0000000076ff9000-0x0000000076ffc000) (0MB)
efi: mem29: type=6, attr=0x800000000000000f, range=[0x0000000076ffc000-0x0000000076ffd000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x0000000076ffd000-0x0000000076ffe000) (0MB)
efi: mem31: type=6, attr=0x800000000000000f, range=[0x0000000076ffe000-0x0000000077084000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x0000000077084000-0x0000000077298000) (2MB)
efi: mem33: type=6, attr=0x800000000000000f, range=[0x0000000077298000-0x0000000077ff9000) (13MB)
efi: mem34: type=4, attr=0xf, range=[0x0000000077ff9000-0x0000000078000000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB)
efi: mem36: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./X99-UD4-CF, BIOS F5 08/18/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-through
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 380000000000 mask 3FC000000000 uncachable
  2 base 00007F000000 mask 3FFFFF000000 uncachable
  3 base 0000F0000000 mask 3FFFF8000000 write-through
  4 base 0000F8000000 mask 3FFFFE000000 write-through
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x02fd3000, 0x02fd3fff] PGTABLE
BRK [0x02fd4000, 0x02fd4fff] PGTABLE
BRK [0x02fd5000, 0x02fd5fff] PGTABLE
init_memory_mapping: [mem 0x47fe00000-0x47fffffff]
 [mem 0x47fe00000-0x47fffffff] page 1G
init_memory_mapping: [mem 0x47c000000-0x47fdfffff]
 [mem 0x47c000000-0x47fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x47bffffff]
 [mem 0x400000000-0x47bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x74f1efff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x74dfffff] page 2M
 [mem 0x74e00000-0x74f1efff] page 4k
init_memory_mapping: [mem 0x75a97000-0x75d1cfff]
 [mem 0x75a97000-0x75d1cfff] page 4k
BRK [0x02fd6000, 0x02fd6fff] PGTABLE
BRK [0x02fd7000, 0x02fd7fff] PGTABLE
init_memory_mapping: [mem 0x76fb9000-0x76ff7fff]
 [mem 0x76fb9000-0x76ff7fff] page 4k
BRK [0x02fd8000, 0x02fd8fff] PGTABLE
init_memory_mapping: [mem 0x76ff9000-0x76ffbfff]
 [mem 0x76ff9000-0x76ffbfff] page 4k
init_memory_mapping: [mem 0x76ffd000-0x76ffdfff]
 [mem 0x76ffd000-0x76ffdfff] page 4k
init_memory_mapping: [mem 0x77084000-0x77297fff]
 [mem 0x77084000-0x77297fff] page 4k
init_memory_mapping: [mem 0x77ff9000-0x77ffffff]
 [mem 0x77ff9000-0x77ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35862000-0x36c28fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007612D000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007612D098 0000AC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007615AFA0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000007612D1D8 02DDC8 (v02 ALASKA A M I    01072009 INTL 20091013)
ACPI: FACS 0x00000000768EBF80 000040
ACPI: APIC 0x000000007615B0B0 00012C (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000007615B1E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000007615B228 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007615B2C8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: UEFI 0x000000007615B308 000042 (v01 ALASKA A M I    01072009      00000000)
ACPI: BDAT 0x000000007615B350 000030 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: HPET 0x000000007615B380 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MSCT 0x000000007615B3B8 000090 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: PMCT 0x000000007615B448 000064 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SLIT 0x000000007615B4B0 00002D (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x000000007615B4E0 000E58 (v03 ALASKA A M I    00000001 INTL 20091013)
ACPI: WDDT 0x000000007615C338 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SSDT 0x000000007615C378 009BF9 (v01 ALASKA PmMgt    00000001 INTL 20120913)
ACPI: BGRT 0x0000000076165F78 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: DMAR 0x0000000076165FB0 0000CC (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: ASF! 0x0000000076166080 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x47fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x47fffffff] -> [mem 0x00000000-0x47fffffff]
Initmem setup node 0 [mem 0x00000000-0x47fffffff]
  NODE_DATA [mem 0x47fff5000-0x47fff9fff]
 [ffffea0000000000-ffffea0011ffffff] PMD -> [ffff88046f800000-ffff88047f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x47fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009ffff]
  node   0: [mem 0x00100000-0x74f1efff]
  node   0: [mem 0x75a97000-0x75d1cfff]
  node   0: [mem 0x76fb9000-0x76ff7fff]
  node   0: [mem 0x76ff9000-0x76ffbfff]
  node   0: [mem 0x76ffd000-0x76ffdfff]
  node   0: [mem 0x77084000-0x77297fff]
  node   0: [mem 0x77ff9000-0x77ffffff]
  node   0: [mem 0x100000000-0x47fffffff]
On node 0 totalpages: 4150178
  DMA zone: 64 pages used for memmap
  DMA zone: 25 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 7441 pages used for memmap
  DMA32 zone: 476163 pages, LIFO batch:31
  Normal zone: 57344 pages used for memmap
  Normal zone: 3670016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x74f1f000-0x75a96fff]
PM: Registered nosave memory: [mem 0x75d1d000-0x768eefff]
PM: Registered nosave memory: [mem 0x768ef000-0x76f60fff]
PM: Registered nosave memory: [mem 0x76f61000-0x76fb8fff]
PM: Registered nosave memory: [mem 0x76ff8000-0x76ff8fff]
PM: Registered nosave memory: [mem 0x76ffc000-0x76ffcfff]
PM: Registered nosave memory: [mem 0x76ffe000-0x77083fff]
PM: Registered nosave memory: [mem 0x77298000-0x77ff8fff]
PM: Registered nosave memory: [mem 0x78000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88047fc00000 s87360 r8192 d23232 u131072
pcpu-alloc: s87360 r8192 d23232 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4085304
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15936292K/16600712K available (7731K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 664420K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:808 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 66584576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3000.182 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.36 BogoMIPS (lpj=12000728)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff82e82000 - ffffffff82e8a000)
ftrace: allocating 29288 entries in 115 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffd000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x00000076e32000 end: 0x00000076e40fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base  0xfbffc000 IOMMU 1
HPET id 0 under DRHD base 0xfbffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 76546176267934 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (96005.82 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x75d1d000-0x768eefff] (12394496 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  0:04:46, date: 10/22/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [mem 0x00000010-0x0000001f pref]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
acpi PNP0A03:03: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io  0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io  0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io  0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io  0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io  0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb13d000-0xfb13d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb120000-0xfb12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb13c000-0xfb13c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb139000-0xfb139fff]
pci 0000:00:19.0: reg 0x18: [io  0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb138000-0xfb1383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb130000-0xfb133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb137000-0xfb1373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb136000-0xfb1367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb135000-0xfb1350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
acpiphp: Slot [2] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:1187] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: can't claim BAR 0 [mem 0x00000010-0x0000001f pref]: no compatible bridge window
e820: reserve RAM buffer [mem 0x74f1f000-0x77ffffff]
e820: reserve RAM buffer [mem 0x75d1d000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ff8000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ffc000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ffe000-0x77ffffff]
e820: reserve RAM buffer [mem 0x77298000-0x77ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] could not be reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem size 0x00000010 pref]
pci 0000:ff:1e.3: BAR 0: [mem size 0x00000010 pref] conflicts with reserved [mem 0x00000000-0x00000fff]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20252K (ffff880035862000 - ffff880036c29000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x709ec000-0x749ec000] (64MB) mapped at [ffff8800709ec000-ffff8800749ebfff]
microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU12 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU13 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU14 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU15 sig=0x306f2, pf=0x4, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1413936290.668:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 31750
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
pcieport 0000:00:02.0: irq 43 for MSI/MSI-X
pcieport 0000:00:03.0: irq 44 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf9000000, mapped to 0xffffc90011c80000, using 7552k, total 7552k
efifb: mode is 1600x1200x32, linelength=6400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 200x75
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-23-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
Intel pstate controlling: cpu 12
Intel pstate controlling: cpu 13
Intel pstate controlling: cpu 14
Intel pstate controlling: cpu 15
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 8c730e22ea033108f56d33d22eabf541c6466d2b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 2:188:52
memory memory84: hash matches
rtc_cmos 00:00: setting system clock to 2014-10-22 00:04:51 UTC (1413936291)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1360K (ffffffff82d2e000 - ffffffff82e82000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 448K (ffff880002790000 - ffff880002800000)
Freeing unused kernel memory: 488K (ffff880002b86000 - ffff880002c00000)
systemd-udevd[200]: starting version 208
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: irq 45 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst 
PTP clock support registered
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d280 irq 45
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xc impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata5: DUMMY
ata6: DUMMY
ata7: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136200 irq 46
ata8: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136280 irq 46
ata9: DUMMY
ata10: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:aa:14:29:ab:0d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: ATA-9: Crucial_CT128MX100SSD1, MU01, max UDMA/133
ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata7.00: ATA-8: SAMSUNG HD253GJ, 1AJ10001, max UDMA/133
ata7.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: ATA-8: SAMSUNG HD253GJ, 1AJ10001, max UDMA/133
ata8.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Crucial_CT128MX1 MU01 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
ata7.00: configured for UDMA/133
ata8.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access     ATA      SAMSUNG HD253GJ  0001 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 6:0:0:0: Attached scsi generic sg1 type 0
scsi 7:0:0:0: Direct-Access     ATA      SAMSUNG HD253GJ  0001 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI disk
 sdc: unknown partition table
sd 7:0:0:0: [sdc] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
raid6: sse2x1   10597 MB/s
usb 2-1: new high-speed USB device number 2 using ehci-pci
raid6: sse2x2   13304 MB/s
raid6: sse2x4   15493 MB/s
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
raid6: avx2x1   20568 MB/s
raid6: avx2x2   23699 MB/s
raid6: avx2x4   27810 MB/s
raid6: using algorithm avx2x4 (27810 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
usb 3-4: new high-speed USB device number 2 using xhci_hcd
   avx       : 32398.000 MB/sec
Btrfs loaded
BTRFS: device fsid 7a4ad723-fd15-47ec-bfe5-bfd83beb960d devid 1 transid 337 /dev/sdb
BTRFS: device fsid 7a4ad723-fd15-47ec-bfe5-bfd83beb960d devid 2 transid 337 /dev/sdc
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 3-4: New USB device found, idVendor=1a40, idProduct=0101
usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-4: Product: USB 2.0 Hub
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
Adding 16601084k swap on /dev/sda3.  Priority:-1 extents:1 across:16601084k SSFS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
usb 3-9: new high-speed USB device number 3 using xhci_hcd
random: nonblocking pool is initialized
systemd-udevd[493]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
usb 3-9: New USB device found, idVendor=045b, idProduct=0209
usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
MXM: GUID detected in BIOS
checking generic (f9000000 760000) vs hw (f0000000 8000000)
checking generic (f9000000 760000) vs hw (f8000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau  [  DEVICE][0000:03:00.0] BOOT0  : 0x0e4070a2
nouveau  [  DEVICE][0000:03:00.0] Chipset: GK104 (NVE4)
nouveau  [  DEVICE][0000:03:00.0] Family : NVE0
nouveau  [   VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau  [   VBIOS][0000:03:00.0] ... signature not found
nouveau  [   VBIOS][0000:03:00.0] checking PROM for image...
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
AVX2 version of gcm_enc/dec engaged.
sound hdaudioC0D2: ALC1150: SKU not ready 0x00000000
sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D2:    mono: mono_out=0x0
sound hdaudioC0D2:    dig-out=0x11/0x1e
sound hdaudioC0D2:    inputs:
sound hdaudioC0D2:      Front Mic=0x19
sound hdaudioC0D2:      Rear Mic=0x18
sound hdaudioC0D2:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
nouveau  [   VBIOS][0000:03:00.0] ... appears to be valid
nouveau  [   VBIOS][0000:03:00.0] using image from PROM
nouveau  [   VBIOS][0000:03:00.0] BIT signature found
nouveau  [   VBIOS][0000:03:00.0] version 80.04.b6.00.00
nouveau 0000:03:00.0: irq 50 for MSI/MSI-X
nouveau  [     PMC][0000:03:00.0] MSI interrupts enabled
nouveau  [     PFB][0000:03:00.0] RAM type: GDDR5
nouveau  [     PFB][0000:03:00.0] RAM size: 2048 MiB
nouveau  [     PFB][0000:03:00.0]    ZCOMP: 0 tags
nouveau  [    VOLT][0000:03:00.0] GPU voltage: 862500uv
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1413936292.788:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=772 comm="apparmor_parser"
audit: type=1400 audit(1413936292.788:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=772 comm="apparmor_parser"
audit: type=1400 audit(1413936292.788:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=772 comm="apparmor_parser"
nouveau  [  PTHERM][0000:03:00.0] FAN control: PWM
nouveau  [  PTHERM][0000:03:00.0] fan management: automatic
nouveau  [  PTHERM][0000:03:00.0] internal sensor: yes
nouveau  [     CLK][0000:03:00.0] 07: core 405 MHz memory 648 MHz 
nouveau  [     CLK][0000:03:00.0] 0a: core 405-967 MHz memory 1620 MHz 
nouveau  [     CLK][0000:03:00.0] 0e: core 405-1202 MHz memory 6008 MHz 
nouveau  [     CLK][0000:03:00.0] 0f: core 405-1202 MHz memory 6008 MHz 
nouveau  [     CLK][0000:03:00.0] --: core 405 MHz memory 648 MHz 
[TTM] Zone  kernel: Available graphics memory: 8129208 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau  [     DRM] VRAM: 2048 MiB
nouveau  [     DRM] GART: 1048576 MiB
nouveau  [     DRM] TMDS table version 2.0
nouveau  [     DRM] DCB version 4.0
nouveau  [     DRM] DCB outp 00: 01000f02 00020030
nouveau  [     DRM] DCB outp 01: 02000f00 00000000
nouveau  [     DRM] DCB outp 02: 08011f82 00020030
nouveau  [     DRM] DCB outp 03: 02822f62 0f420010
nouveau  [     DRM] DCB outp 05: 04833fb6 0f420010
nouveau  [     DRM] DCB outp 06: 04033f72 00020010
nouveau  [     DRM] DCB conn 00: 00001030
nouveau  [     DRM] DCB conn 01: 01000131
nouveau  [     DRM] DCB conn 02: 00010261
nouveau  [     DRM] DCB conn 03: 00020346
nouveau  [     DRM] DCB conn 04: 00000460
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau  [     DRM] MM: using COPY for buffer copies
audit: type=1400 audit(1413936292.808:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1413936292.808:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=786 comm="apparmor_parser"
audit: type=1400 audit(1413936292.808:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=786 comm="apparmor_parser"
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=045b, idProduct=0210
usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
init: failsafe main process (807) killed by TERM signal
usb 3-4.1: new full-speed USB device number 4 using xhci_hcd
audit: type=1400 audit(1413936292.956:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=941 comm="apparmor_parser"
audit: type=1400 audit(1413936292.956:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=941 comm="apparmor_parser"
audit: type=1400 audit(1413936292.956:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=941 comm="apparmor_parser"
systemd-logind[948]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[948]: Watching system buttons on /dev/input/event0 (Power Button)
systemd-logind[948]: New seat seat0.
nouveau  [     DRM] allocated 2560x1600 fb: 0x80000, bo ffff8804642c1000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 320x100
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.2 20120801 for 0000:03:00.0 on minor 0
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
usb 3-4.1: New USB device found, idVendor=1532, idProduct=0007
usb 3-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.1: Product: DeathAdder
usb 3-4.1: Manufacturer: Razer
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
usb 3-4.2: new low-speed USB device number 5 using xhci_hcd
e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 3-4.2: New USB device found, idVendor=04f2, idProduct=0833
usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.2: Product: USB Keyboard
usb 3-4.2: Manufacturer: CHICONY
usb 3-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usb 3-9.4: new full-speed USB device number 6 using xhci_hcd
usbhid 3-4.1:1.0: can't add hid device: -32
usbhid: probe of 3-4.1:1.0 failed with error -32
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:04F2:0833.0001/input/input12
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-4.2/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.1/0003:04F2:0833.0002/input/input13
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-4.2/input1
usb 3-9.4: New USB device found, idVendor=0403, idProduct=6001
usb 3-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.4: Product: FT232R USB UART
usb 3-9.4: Manufacturer: FTDI
usb 3-9.4: SerialNumber: A800fq8V
usb 3-4.1: USB disconnect, device number 4
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
usb 3-4.1: new full-speed USB device number 7 using xhci_hcd
usb 3-4.1: New USB device found, idVendor=1532, idProduct=0007
usb 3-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.1: Product: DeathAdder
usb 3-4.1: Manufacturer: Razer
input: Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:1532:0007.0003/input/input18
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:14.0-4.1/input0
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1533) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-logind[948]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[948]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[948]: New session c1 of user phoronix.
systemd-logind[948]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-9.4:1.0: FTDI USB Serial Device converter detected
usb 3-9.4: Detected FT232RL
usb 3-9.4: Number of endpoints 2
usb 3-9.4: Endpoint 1 MaxPacketSize 64
usb 3-9.4: Endpoint 2 MaxPacketSize 64
usb 3-9.4: Setting MaxPacketSize 64
usb 3-9.4: FTDI USB Serial Device converter now attached to ttyUSB0
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BTRFS: device fsid 6f19d7a2-f87d-4a3c-af26-399c1d27f6c7 devid 1 transid 3 /dev/sdb
BTRFS: device fsid 6f19d7a2-f87d-4a3c-af26-399c1d27f6c7 devid 2 transid 3 /dev/sdc
systemd-hostnamed[2955]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
BTRFS info (device sdc): disk space caching is enabled
BTRFS: flagging fs with big metadata feature

Return To RAID1 System Information