dmesg - vo2jadro
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@komainu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bce50fff] usable
BIOS-e820: [mem 0x00000000bce51000-0x00000000bce56fff] reserved
BIOS-e820: [mem 0x00000000bce57000-0x00000000bd057fff] usable
BIOS-e820: [mem 0x00000000bd058000-0x00000000bd0aefff] reserved
BIOS-e820: [mem 0x00000000bd0af000-0x00000000bd1a7fff] usable
BIOS-e820: [mem 0x00000000bd1a8000-0x00000000bd4aefff] reserved
BIOS-e820: [mem 0x00000000bd4af000-0x00000000bd4d7fff] usable
BIOS-e820: [mem 0x00000000bd4d8000-0x00000000bd4defff] reserved
BIOS-e820: [mem 0x00000000bd4df000-0x00000000bd534fff] usable
BIOS-e820: [mem 0x00000000bd535000-0x00000000bd57efff] ACPI NVS
BIOS-e820: [mem 0x00000000bd57f000-0x00000000bd5e3fff] usable
BIOS-e820: [mem 0x00000000bd5e4000-0x00000000bd5fcfff] ACPI data
BIOS-e820: [mem 0x00000000bd5fd000-0x00000000bd5fffff] usable
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: FUJITSU SIEMENS LIFEBOOK S6420/FJNB1E6, BIOS Version 1.14 09/24/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BE000000 mask FFE000000 uncachable
4 base 0BD800000 mask FFF800000 uncachable
5 base 100000000 mask FC0000000 write-back
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4094MB, range: 2MB, type UC
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 3040MB, range: 32MB, type UC
reg 4, base: 3032MB, range: 8MB, type UC
reg 5, base: 4GB, range: 1GB, type WB
total RAM covered: 4056M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
reg 4, base: 4GB, range: 1GB, type WB
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
RAMDISK: [mem 0x34f4e000-0x3679efff]
ACPI: RSDP 000f5410 00024 (v02 FUJ )
ACPI: XSDT bd5f2dad 00074 (v01 FSC PC 01140000 FUJ 00000100)
ACPI: FACP bd5e6000 000F4 (v03 FSC PC 01140000 FUJ 00000100)
ACPI: DSDT bd5e7000 08C3B (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: FACS bd56efc0 00040
ACPI: SSDT bd5fba94 0034F (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: HPET bd5fbed7 00038 (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: MCFG bd5fbf0f 0003C (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: SSDT bd5fbf4b 00A5A (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: SSDT bd5fc9a5 003E1 (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: APIC bd5fcd86 00068 (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: BOOT bd5fcdee 00028 (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: SLIC bd5fce16 00176 (v01 FSC PC 01140000 FUJ 00000100)
ACPI: SSDT bd5e5000 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
4228MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b3a000, 0x01b3afff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbce50fff]
node 0: [mem 0xbce57000-0xbd057fff]
node 0: [mem 0xbd0af000-0xbd1a7fff]
node 0: [mem 0xbd4af000-0xbd4d7fff]
node 0: [mem 0xbd4df000-0xbd534fff]
node 0: [mem 0xbd57f000-0xbd5e3fff]
node 0: [mem 0xbd5fd000-0xbd5fffff]
node 0: [mem 0x00000000-0x3fffffff]
On node 0 totalpages: 1036750
free_area_init_node: node 0, pgdat c1948bc0, node_mem_map f274e020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 8457 pages used for memmap
HighMem zone: 808500 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xbd600000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bd0000 s36288 r0 d21056 u57344
pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034966
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10485752 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00140000)
Memory: 4058340K/4147000K available (6351K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 88660K reserved, 3234000K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1962000 - 0xc1a3e000 ( 880 kB)
.data : 0xc16341e4 - 0xc1961e00 (3255 kB)
.text : 0xc1000000 - 0xc16341e4 (6352 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.962 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.92 BogoMIPS (lpj=9575848)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27134 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f6ce6000 soft=f6cf0000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9575.84 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbd535000-0xbd57efff] (303104 bytes)
regulator-dummy: no parameters
RTC time: 11:47:21, date: 10/18/14
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xfddf0, last bus=57
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT bd56e965 003F1 (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003F1 (v01 FUJ FJNB1E6 01140000 FUJ 00000100)
ACPI: SSDT bd4dac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT bd4d86a0 005CC (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005CC (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT bd4d9da0 000FD (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000FD (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT bd4dcf20 00047 (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047 (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 2 docks/bays found
acpi LNXCPU:00: Invalid PBLK length [8]
acpi LNXCPU:01: Invalid PBLK length [8]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf0a04000-0xf0a043ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0a00000-0xf0a03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf0a04400-0xf0a047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x18f8-0x18ff]
pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 0x18: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x1c50-0x1c57]
pci 0000:00:1f.5: reg 0x14: [io 0x1c44-0x1c47]
pci 0000:00:1f.5: reg 0x18: [io 0x1c48-0x1c4f]
pci 0000:00:1f.5: reg 0x1c: [io 0x1c40-0x1c43]
pci 0000:00:1f.5: reg 0x20: [io 0x1c30-0x1c3f]
pci 0000:00:1f.5: reg 0x24: [io 0x1c20-0x1c2f]
pci 0000:08:00.0: [11ab:4363] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xf0500000-0xf0503fff 64bit]
pci 0000:08:00.0: reg 0x18: [io 0x2000-0x20ff]
pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 08-0f]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:18:00.0: [8086:4235] type 00 class 0x028000
pci 0000:18:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit]
pci 0000:18:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 18-1f]
pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:38:03.0: [1217:7136] type 02 class 0x060700
pci 0000:38:03.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:38:03.0: supports D1 D2
pci 0000:38:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:38:03.2: [1217:7120] type 00 class 0x080501
pci 0000:38:03.2: reg 0x10: [mem 0xf0700000-0xf07000ff]
pci 0000:38:03.2: supports D1 D2
pci 0000:38:03.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:38:03.3: [1217:7130] type 00 class 0x018000
pci 0000:38:03.3: reg 0x10: [mem 0xf0701000-0xf0701fff]
pci 0000:38:03.3: supports D1 D2
pci 0000:38:03.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:38:03.4: [1217:00f7] type 00 class 0x0c0010
pci 0000:38:03.4: reg 0x10: [mem 0xf0702000-0xf0702fff]
pci 0000:38:03.4: reg 0x14: [mem 0xf0700800-0xf0700fff]
pci 0000:38:03.4: supports D1 D2
pci 0000:38:03.4: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 38-39] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0700000-0xf07fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:39: busn_res: can not insert [bus 39-ff] under [bus 38-39] (conflicts with (null) [bus 38-39])
pci_bus 0000:39: busn_res: [bus 39-ff] end is updated to 3c
pci_bus 0000:39: busn_res: can not insert [bus 39-3c] under [bus 38-39] (conflicts with (null) [bus 38-39])
pci_bus 0000:39: [bus 39-3c] partially hidden behind transparent bridge 0000:38 [bus 38-39]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbce51000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd058000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd1a8000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd4d8000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd535000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd5e4000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd600000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0400-0x047f] has been reserved
system 00:00: [io 0x0480-0x048f] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x0f40-0x0f41] has been reserved
system 00:00: [io 0x1100-0x111f] has been reserved
system 00:00: [io 0x1180-0x11ff] has been reserved
system 00:00: [io 0x1640-0x164f] has been reserved
system 00:00: [io 0xf800-0xf87f] has been reserved
system 00:00: [io 0xf880-0xf8ff] has been reserved
system 00:00: [io 0xfc00-0xfc7f] has been reserved
system 00:00: [io 0xfc80-0xfcff] has been reserved
system 00:00: [io 0xfd00-0xfd7f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [dma 3]
pnp 00:0b: Plug and Play ACPI device, IDs SMCf010 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 08-0f] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 18-1f] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18-1f] add_size 200000
pci 0000:38:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:38:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 38-39] add_size 1000
pci 0000:38:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 38-39] add_size 4000000
pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc4000000-0xc42fffff pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4300000-0xc44fffff 64bit pref]
pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4500000-0xc45000ff 64bit]
pci 0000:08:00.0: BAR 6: assigned [mem 0xc4000000-0xc401ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 08-0f]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xc42fffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 18-1f]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:00:1c.2: bridge window [mem 0xc4300000-0xc44fffff 64bit pref]
pci 0000:38:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:38:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:38:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:38:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:38:03.0: BAR 0: assigned [mem 0xc8000000-0xc8000fff]
pci 0000:38:03.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:38:03.0: BAR 16: assigned [mem 0xcc000000-0xcfffffff]
pci 0000:38:03.0: BAR 13: assigned [io 0x4000-0x40ff]
pci 0000:38:03.0: BAR 14: assigned [io 0x4400-0x44ff]
pci 0000:38:03.0: CardBus bridge to [bus 39-3c]
pci 0000:38:03.0: bridge window [io 0x4000-0x40ff]
pci 0000:38:03.0: bridge window [io 0x4400-0x44ff]
pci 0000:38:03.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:38:03.0: bridge window [mem 0xcc000000-0xcfffffff]
pci 0000:00:1e.0: PCI bridge to [bus 38-39]
pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1e.0: bridge window [mem 0xf0700000-0xf07fffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:08: resource 2 [mem 0xc4000000-0xc42fffff pref]
pci_bus 0000:18: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:18: resource 1 [mem 0xf0600000-0xf06fffff]
pci_bus 0000:18: resource 2 [mem 0xc4300000-0xc44fffff 64bit pref]
pci_bus 0000:38: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:38: resource 1 [mem 0xf0700000-0xf07fffff]
pci_bus 0000:38: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:38: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:38: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:38: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:38: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:38: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:38: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:38: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:39: resource 0 [io 0x4000-0x40ff]
pci_bus 0000:39: resource 1 [io 0x4400-0x44ff]
pci_bus 0000:39: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:39: resource 3 [mem 0xcc000000-0xcfffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24900K (f4f4e000 - f679f000)
Simple Boot Flag at 0x7b set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1413632841.724:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1658
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (27 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
ata_piix 0000:00:1f.5: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf0a04000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0a04400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4b7c2664fb134f99aaf5e09f5b6d30d43b5eac95'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 2:778:782
rtc_cmos 00:07: setting system clock to 2014-10-18 11:47:22 UTC (1413632842)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
isapnp: No Plug & Play device found
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-5: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-5: New USB device found, idVendor=0409, idProduct=005a
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ata2.00: ATAPI: MATSHITADVD-RAM UJ862BJ, 1.00, max UDMA/33
ata1.00: ATA-8: Hitachi HTS723216L9A360, FC2OC30F, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72321 FC2O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862BJ 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
Write protecting the kernel text: 6356k
Write protecting the kernel read-only data: 2644k
NX-protecting the kernel data: 5932k
systemd-udevd[106]: starting version 204
[drm] Initialized drm 1.1.0 20060810
video: module verification failed: signature and/or required key missing - tainting kernel
sky2: driver version 1.30
sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:08:00.0: irq 42 for MSI/MSI-X
sky2 0000:08:00.0 eth0: addr 00:17:42:ea:5b:e1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:38:03.2: SDHCI controller found [1217:7120] (rev 2)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:38:03.2] using PIO
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
firewire_ohci 0000:38:03.4: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
usb 2-4: new high-speed USB device number 4 using ehci-pci
firewire_core 0000:38:03.4: created device fw0: GUID 00000e1003fe3143, S400
usb 2-4: New USB device found, idVendor=046d, idProduct=09b2
usb 2-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-4: Product: OEM Camera
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=08ff, idProduct=2580
usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1: Product: Fingerprint Sensor
fbcon: inteldrmfb (fb0) is primary device
usb 6-2: new full-speed USB device number 3 using uhci_hcd
usb 6-2: New USB device found, idVendor=0c24, idProduct=0021
usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:04: registered as cooling_device2
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 6 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[347]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
fujitsu_laptop: Identified laptop model 'Fujitsu Siemens S6420'
input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3e/FUJ02B1:00/input/input6
fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input7
fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
fujitsu_laptop: BTNI: [0xff0101]
fujitsu_laptop: driver 0.6.0 successfully loaded
tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16)
NET: Registered protocol family 23
found SMC SuperIO Chip (devid=0x7a rev=03 base=0x002e): LPC47N227
smsc_superio_flat(): fir: 0x6e8, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e
smsc_ircc_present: can't get sir_base of 0x2e8
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:18:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:18:00.0: irq 45 for MSI/MSI-X
tpm_tis 00:02: Adjusting TPM timeout parameters.
autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x19
Dock Mic=0x1b
Mic=0x18
realtek: No valid SSID, checking pincfg 0x90970131 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
yenta_cardbus 0000:38:03.0: CardBus bridge found [10cf:143d]
yenta_cardbus 0000:38:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.LPCB.PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPCB.OGIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPCB.OGIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
device-mapper: multipath: version 1.5.1 loaded
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
yenta_cardbus 0000:38:03.0: ISA IRQ mask 0x0cb8, PCI irq 17
yenta_cardbus 0000:38:03.0: Socket status: 30000006
pci_bus 0000:38: Raising subordinate bus# of parent bus (#38) from #39 to #3c
yenta_cardbus 0000:38:03.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
excluding 0x4000-0x40ff 0x4400-0x44ff
yenta_cardbus 0000:38:03.0: pcmcia: parent PCI bridge window: [mem 0xf0700000-0xf07fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0700000-0xf07fffff:
excluding 0xf0700000-0xf070ffff
yenta_cardbus 0000:38:03.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff:
excluding 0xc0000000-0xc3ffffff
iwlwifi 0000:18:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
iwlwifi 0000:18:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:18:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:18:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:18:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:18:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
iwlwifi 0000:18:00.0: L1 Enabled; Disabling L0S
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (608) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device OEM Camera (046d:09b2)
input: OEM Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ppdev: user-space parallel port driver
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa42000/0xa0000, board id: 3655, fw id: 504741
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x2e8-0x2ef 0x378-0x37f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f8-0x48f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
init: failsafe main process (677) killed by TERM signal
tpm_tis 00:02: TPM is disabled/deactivated (0x7)
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
lp0: using parport0 (interrupt-driven).
sky2 0000:08:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:18:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:18:00.0: Radio type=0x0-0x2-0x0
iwlwifi 0000:18:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:18:00.0: Radio type=0x0-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
bio: create slab at 1
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1c2 offMax=0x69c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.0 (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1335) terminated with status 1
Adding 1951740k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:1951740k FS
wlan0: authenticate with 90:f6:52:ee:5a:fc
wlan0: send auth to 90:f6:52:ee:5a:fc (try 1/3)
wlan0: authenticated
iwlwifi 0000:18:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 90:f6:52:ee:5a:fc (try 1/3)
wlan0: RX AssocResp from 90:f6:52:ee:5a:fc (capab=0x431 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
usb 3-2: new low-speed USB device number 2 using uhci_hcd
usb 3-2: New USB device found, idVendor=03f0, idProduct=2003
usb 3-2: New USB device strings: Mfr=4, Product=18, SerialNumber=0
usb 3-2: Product: HP f2100a Optical USB Travel Mouse
usb 3-2: Manufacturer: Hewlett-Packard
WARNING! power/level is deprecated; use power/control instead
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Hewlett-Packard HP f2100a Optical USB Travel Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input14
hid-generic 0003:03F0:2003.0001: input,hidraw0: USB HID v1.00 Mouse [Hewlett-Packard HP f2100a Optical USB Travel Mouse] on usb-0000:00:1a.0-2/input0
usb 1-3: new high-speed USB device number 4 using ehci-pci
usb 1-3: New USB device found, idVendor=1058, idProduct=0702
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: External HDD
usb 1-3: Manufacturer: Western Digital
usb 1-3: SerialNumber: 575845593037563839323835
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi4 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
scsi 4:0:0:0: Direct-Access WD 2500BEV External 1.04 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
perf samples too long (2539 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 90:f6:52:ee:5a:fc by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
parport_pc 00:0c: disabled
serial 00:0a: disabled
serial 00:0a: System wakeup disabled by ACPI
PM: suspend of devices complete after 816.253 msecs
PM: late suspend of devices complete after 0.162 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 204.413 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Initializing CPU#1
CPU1 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
yenta_cardbus 0000:38:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
PM: noirq resume of devices complete after 299.385 msecs
PM: early resume of devices complete after 0.116 msecs
i915 0000:00:02.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1a.1: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1a.2: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci-pci 0000:00:1a.7: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb6: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb7: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb8: root hub lost power or was reset
ehci-pci 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ata_piix 0000:00:1f.2: setting latency timer to 64
ata_piix 0000:00:1f.5: setting latency timer to 64
iwlwifi 0000:18:00.0: RF_KILL bit toggled to enable radio.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-2: reset low-speed USB device number 2 using uhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/33
firewire_core 0000:38:03.4: rediscovered device fw0
usb 6-2: reset full-speed USB device number 3 using uhci_hcd
usb 2-4: reset high-speed USB device number 4 using ehci-pci
tpm_tis 00:02: TPM is disabled/deactivated (0x7)
serial 00:0a: activated
parport_pc 00:0c: activated
usb 6-1: reset full-speed USB device number 2 using uhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
iwlwifi 0000:18:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:18:00.0: Radio type=0x0-0x2-0x0
PM: resume of devices complete after 1942.818 msecs
PM: Finishing wakeup.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlan0: authenticate with 90:f6:52:ee:5a:fc
wlan0: send auth to 90:f6:52:ee:5a:fc (try 1/3)
wlan0: authenticated
iwlwifi 0000:18:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
wlan0: associate with 90:f6:52:ee:5a:fc (try 1/3)
wlan0: RX AssocResp from 90:f6:52:ee:5a:fc (capab=0x431 status=0 aid=3)
wlan0: associated