dmesg - primesieve-atom-n2930
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-38-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #65-Ubuntu SMP Thu Oct 9 11:36:50 UTC 2014 (Ubuntu 3.13.0-38.65-generic 3.13.11.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x0000000077cfdfff] usable
BIOS-e820: [mem 0x0000000077cfe000-0x0000000077d8dfff] type 20
BIOS-e820: [mem 0x0000000077d8e000-0x000000007860dfff] reserved
BIOS-e820: [mem 0x000000007860e000-0x000000007870dfff] ACPI NVS
BIOS-e820: [mem 0x000000007870e000-0x000000007874dfff] ACPI data
BIOS-e820: [mem 0x000000007874e000-0x0000000079365fff] usable
BIOS-e820: [mem 0x0000000079366000-0x0000000079c65fff] ACPI NVS
BIOS-e820: [mem 0x0000000079c66000-0x0000000079ffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI 2.0=0x7874d014 SMBIOS=0x7860d000
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
efi: mem02: type=10, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000086000) (0MB)
efi: mem04: type=0, attr=0xf, range=[0x0000000000086000-0x0000000000088000) (0MB)
efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001503000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000001503000-0x0000000002000000) (10MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003403000) (20MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000003403000-0x0000000020000000) (459MB)
efi: mem10: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000020100000-0x0000000034b54000) (330MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000034b54000-0x00000000365a2000) (26MB)
efi: mem13: type=7, attr=0xf, range=[0x00000000365a2000-0x0000000052874000) (450MB)
efi: mem14: type=2, attr=0xf, range=[0x0000000052874000-0x0000000070000000) (471MB)
efi: mem15: type=4, attr=0xf, range=[0x0000000070000000-0x0000000070020000) (0MB)
efi: mem16: type=7, attr=0xf, range=[0x0000000070020000-0x0000000074c0d000) (75MB)
efi: mem17: type=2, attr=0xf, range=[0x0000000074c0d000-0x0000000074cf8000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x0000000074cf8000-0x0000000074cfa000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x0000000074cfa000-0x0000000074cfb000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x0000000074cfb000-0x0000000074cfd000) (0MB)
efi: mem21: type=2, attr=0xf, range=[0x0000000074cfd000-0x0000000074d00000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x0000000074d00000-0x0000000074d01000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x0000000074d01000-0x0000000074d02000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x0000000074d02000-0x0000000074d07000) (0MB)
efi: mem25: type=2, attr=0xf, range=[0x0000000074d07000-0x0000000074d09000) (0MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000074d09000-0x0000000074d0c000) (0MB)
efi: mem27: type=2, attr=0xf, range=[0x0000000074d0c000-0x0000000074d0d000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x0000000074d0d000-0x0000000074d0f000) (0MB)
efi: mem29: type=2, attr=0xf, range=[0x0000000074d0f000-0x0000000074d10000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x0000000074d10000-0x0000000074d12000) (0MB)
efi: mem31: type=2, attr=0xf, range=[0x0000000074d12000-0x0000000074dfe000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x0000000074dfe000-0x0000000074eca000) (0MB)
efi: mem33: type=1, attr=0xf, range=[0x0000000074eca000-0x0000000074ffe000) (1MB)
efi: mem34: type=7, attr=0xf, range=[0x0000000074ffe000-0x0000000075ee0000) (14MB)
efi: mem35: type=4, attr=0xf, range=[0x0000000075ee0000-0x00000000774fe000) (22MB)
efi: mem36: type=7, attr=0xf, range=[0x00000000774fe000-0x0000000077981000) (4MB)
efi: mem37: type=2, attr=0xf, range=[0x0000000077981000-0x000000007798b000) (0MB)
efi: mem38: type=3, attr=0xf, range=[0x000000007798b000-0x0000000077cfe000) (3MB)
efi: mem39: type=5, attr=0x800000000000000f, range=[0x0000000077cfe000-0x0000000077d8e000) (0MB)
efi: mem40: type=6, attr=0x800000000000000f, range=[0x0000000077d8e000-0x000000007800e000) (2MB)
efi: mem41: type=0, attr=0xf, range=[0x000000007800e000-0x000000007860e000) (6MB)
efi: mem42: type=10, attr=0xf, range=[0x000000007860e000-0x000000007870e000) (1MB)
efi: mem43: type=9, attr=0xf, range=[0x000000007870e000-0x000000007874e000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x000000007874e000-0x0000000079366000) (12MB)
efi: mem45: type=10, attr=0xf, range=[0x0000000079366000-0x0000000079c66000) (9MB)
efi: mem46: type=4, attr=0xf, range=[0x0000000079c66000-0x000000007a000000) (3MB)
efi: mem47: type=7, attr=0xf, range=[0x0000000100000000-0x0000000180000000) (2048MB)
efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem49: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
efi: mem50: type=11, attr=0x8000000000000000, range=[0x00000000ffb80000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: Acer Extensa 2509/Extensa 2509, BIOS V1.03 05/16/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 0FFB80000 mask FFFF80000 write-protect
2 base 000000000 mask F80000000 write-back
3 base 07C000000 mask FFC000000 uncachable
4 base 07B000000 mask FFF000000 uncachable
5 base 07AE00000 mask FFFE00000 uncachable
6 base 100000000 mask F80000000 write-back
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007c000] 7c000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fe1000, 0x02fe1fff] PGTABLE
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
BRK [0x02fe3000, 0x02fe3fff] PGTABLE
init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[mem 0x17fe00000-0x17fffffff] page 2M
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[mem 0x17c000000-0x17fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x17bffffff]
[mem 0x100000000-0x17bffffff] page 2M
BRK [0x02fe5000, 0x02fe5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20100000-0x77cfdfff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x77bfffff] page 2M
[mem 0x77c00000-0x77cfdfff] page 4k
BRK [0x02fe6000, 0x02fe6fff] PGTABLE
init_memory_mapping: [mem 0x7874e000-0x79365fff]
[mem 0x7874e000-0x787fffff] page 4k
[mem 0x78800000-0x791fffff] page 2M
[mem 0x79200000-0x79365fff] page 4k
init_memory_mapping: [mem 0x79c66000-0x79ffffff]
[mem 0x79c66000-0x79dfffff] page 4k
[mem 0x79e00000-0x79ffffff] page 2M
RAMDISK: [mem 0x34b54000-0x365a1fff]
ACPI: RSDP 000000007874d014 000024 (v02 ACRSYS)
ACPI: XSDT 000000007874d120 00009C (v01 ACRSYS ACRPRDCT 00000003 01000013)
ACPI: FACP 0000000078746000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: DSDT 0000000078735000 00CE05 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: FACS 00000000786c6000 000040
ACPI: UEFI 000000007874c000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 000000007874b000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: UEFI 000000007874a000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SSDT 0000000078747000 002F1D (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: HPET 0000000078745000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: LPIT 0000000078744000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: APIC 0000000078743000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: MCFG 0000000078742000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0000000078733000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000078732000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000078731000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000078730000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: FPDT 000000007872f000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BGRT 0000000078734000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
Initmem setup node 0 [mem 0x00000000-0x17fffffff]
NODE_DATA [mem 0x17fff6000-0x17fffafff]
[ffffea0000000000-ffffea0005ffffff] PMD -> [ffff88017b600000-ffff88017f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x17fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006efff]
node 0: [mem 0x00070000-0x00085fff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20100000-0x77cfdfff]
node 0: [mem 0x7874e000-0x79365fff]
node 0: [mem 0x79c66000-0x79ffffff]
node 0: [mem 0x100000000-0x17fffffff]
On node 0 totalpages: 1018676
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3972 pages, LIFO batch:0
DMA32 zone: 7663 pages used for memmap
DMA32 zone: 490416 pages, LIFO batch:31
Normal zone: 8192 pages used for memmap
Normal zone: 524288 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0x77cfe000-0x77d8dfff]
PM: Registered nosave memory: [mem 0x77d8e000-0x7860dfff]
PM: Registered nosave memory: [mem 0x7860e000-0x7870dfff]
PM: Registered nosave memory: [mem 0x7870e000-0x7874dfff]
PM: Registered nosave memory: [mem 0x79366000-0x79c65fff]
PM: Registered nosave memory: [mem 0x7a000000-0x7affffff]
PM: Registered nosave memory: [mem 0x7b000000-0x7effffff]
PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88017fc00000 s86400 r8192 d24192 u524288
pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1002735
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3856672K/4074704K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 218032K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1833.409 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.81 BogoMIPS (lpj=7333636)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14667.27 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7860e000-0x7870dfff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0x79366000-0x79c65fff] (9437184 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:42:05, date: 10/10/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000785cac18 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: SSDT 00000000785c9918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: SSDT 00000000785cbe18 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: SSDT 00000000785d7e18 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0x2048-0x204f]
pci 0000:00:13.0: reg 0x14: [io 0x205c-0x205f]
pci 0000:00:13.0: reg 0x18: [io 0x2040-0x2047]
pci 0000:00:13.0: reg 0x1c: [io 0x2058-0x205b]
pci 0000:00:13.0: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:13.0: reg 0x24: [mem 0x9081f000-0x9081f7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90819000-0x9081901f]
pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0x90505000-0x90505fff]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [io 0x1000-0x10ff]
pci 0000:01:00.1: reg 0x18: [mem 0x90504000-0x90504fff 64bit]
pci 0000:01:00.1: reg 0x20: [mem 0x90500000-0x90503fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90500000-0x905fffff]
pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x90400000-0x9047ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0x77cfe000-0x77ffffff]
e820: reserve RAM buffer [mem 0x79366000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io 0x1000-0x1fff]
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: [io 0x0600-0x061f] has been reserved
system 00:03: [io 0xfd60-0xfd63] has been reserved
system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN1b7e PNP0f13 (active)
system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x100000)
pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x100000)
pci 0000:01:00.0: BAR 6: assigned [mem 0x90510000-0x9051ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90500000-0x905fffff]
pci 0000:02:00.0: BAR 6: assigned [mem 0x90480000-0x9048ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0x908ffffe]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:02: resource 1 [mem 0x90400000-0x904fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26936K (ffff880034b54000 - ffff8800365a2000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x71ee0000-0x75ee0000] (64MB) mapped at [ffff880071ee0000-ffff880075edffff]
microcode: CPU0 sig=0x30678, pf=0x8, revision=0x815
microcode: CPU1 sig=0x30678, pf=0x8, revision=0x815
microcode: CPU2 sig=0x30678, pf=0x8, revision=0x815
microcode: CPU3 sig=0x30678, pf=0x8, revision=0x815
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1412970126.516:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7668
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-38-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-38-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Loaded X.509 cert 'Magrathea: Glacier signing key: 2adeedea6cba0b95a6222240711f49c87207bbf6'
registered taskstats version 1
Key type trusted registered
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:476:748
rtc_cmos 00:00: setting system clock to 2014-10-10 19:42:07 UTC (1412970127)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880002737000 - ffff880002800000)
Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
systemd-udevd[119]: starting version 204
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 105 for MSI/MSI-X
rtsx_pci 0000:01:00.0: irq 104 for MSI/MSI-X
rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 104
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[drm] Initialized drm 1.1.0 20060810
r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.1: irq 106 for MSI/MSI-X
r8169 0000:01:00.1 eth0: RTL8411 at 0xffffc90000666000, f8:a9:63:73:0c:df, XID 1c800800 IRQ 106
r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0x9081f000 port 0x9081f100 irq 105
ata2: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (80000000 410000) vs hw (80000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
wmi: Mapper loaded
i915 0000:00:02.0: irq 107 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
fbcon: inteldrmfb (fb0) is primary device
usb 1-4: new high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-4: New USB device found, idVendor=1bcf, idProduct=2c6e
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: HD WebCam
usb 1-4: Manufacturer: NC.21411.02942404D19LM0002
ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
usb 1-2.1: New USB device found, idVendor=04ca, idProduct=300b
usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 1833.333 MHz
usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input8
hid-generic 0003:258A:1005.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x12e800, board id: 2970, fw id: 1627477
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Switched to clocksource tsc
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:30: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 3999740k swap on /dev/sda6. Priority:-1 extents:1 across:3999740k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[322]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1412962939.448:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=403 comm="apparmor_parser"
type=1400 audit(1412962939.448:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
type=1400 audit(1412962939.448:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
type=1400 audit(1412962939.448:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=404 comm="apparmor_parser"
type=1400 audit(1412962939.448:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=404 comm="apparmor_parser"
type=1400 audit(1412962939.448:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=404 comm="apparmor_parser"
type=1400 audit(1412962939.448:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser"
type=1400 audit(1412962939.448:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser"
type=1400 audit(1412962939.448:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=404 comm="apparmor_parser"
type=1400 audit(1412962939.448:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=404 comm="apparmor_parser"
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input10
input: Acer BMA150 accelerometer as /devices/virtual/input/input11
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90015600000, irq=17
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40e00001
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x12
realtek: No valid SSID, checking pincfg 0x40e00001 for NID 0x1d
realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0283
uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c6e)
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
init: failsafe main process (667) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (771) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 111 callbacks suppressed
type=1400 audit(1412962945.440:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1001 comm="apparmor_parser"
r8169 0000:01:00.1 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-stop pre-start process (1077) terminated with status 1
type=1400 audit(1412962974.404:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1767 comm="apparmor_parser"
type=1400 audit(1412962974.404:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1767 comm="apparmor_parser"
type=1400 audit(1412962974.404:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1767 comm="apparmor_parser"
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 966.074 msecs
PM: late suspend of devices complete after 13.774 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.784 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 103
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.959 msecs
PM: early resume of devices complete after 15.860 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2415.526 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: USB disconnect, device number 5
usb 1-2.2: new low-speed USB device number 6 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input15
hid-generic 0003:258A:1005.0002: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=2)
wlan0: associated
init: anacron main process (2690) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
PM: suspend of devices complete after 938.271 msecs
PM: late suspend of devices complete after 12.578 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.955 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.901 msecs
PM: early resume of devices complete after 15.888 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2359.096 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-2.2: USB disconnect, device number 6
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 7 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input16
hid-generic 0003:258A:1005.0003: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: measuring software checksum speed
prefetch64-sse: 7411.000 MB/sec
generic_sse: 6637.000 MB/sec
xor: using function: prefetch64-sse (7411.000 MB/sec)
raid6: sse2x1 407 MB/s
raid6: sse2x2 503 MB/s
raid6: sse2x4 932 MB/s
raid6: using algorithm sse2x4 (932 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 1
Btrfs loaded
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
PM: suspend of devices complete after 893.291 msecs
PM: late suspend of devices complete after 13.672 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.490 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.898 msecs
PM: early resume of devices complete after 15.888 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
ath: phy0: ASPM enabled: 0x42
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2406.444 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-2.2: USB disconnect, device number 7
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 8 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input17
hid-generic 0003:258A:1005.0004: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
PM: suspend of devices complete after 894.622 msecs
PM: late suspend of devices complete after 13.712 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.561 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.899 msecs
PM: early resume of devices complete after 15.888 msecs
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2368.215 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: USB disconnect, device number 8
usb 1-2.2: new low-speed USB device number 9 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input18
hid-generic 0003:258A:1005.0005: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 940.659 msecs
PM: late suspend of devices complete after 13.074 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.783 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.895 msecs
PM: early resume of devices complete after 15.888 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2402.405 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 1-2.2: USB disconnect, device number 9
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 10 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input19
hid-generic 0003:258A:1005.0006: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
init: anacron main process (17912) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 922.904 msecs
PM: late suspend of devices complete after 13.498 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.725 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.897 msecs
PM: early resume of devices complete after 15.887 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2407.883 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: USB disconnect, device number 10
usb 1-2.2: new low-speed USB device number 11 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input20
hid-generic 0003:258A:1005.0007: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
type=1400 audit(1413124427.828:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=18608 comm="apparmor_parser"
type=1400 audit(1413124427.828:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=18608 comm="apparmor_parser"
type=1400 audit(1413124427.832:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=18608 comm="apparmor_parser"
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 940.953 msecs
PM: late suspend of devices complete after 13.093 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.419 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 105
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.895 msecs
PM: early resume of devices complete after 15.887 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2357.700 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: USB disconnect, device number 11
usb 1-2.2: new low-speed USB device number 12 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input21
hid-generic 0003:258A:1005.0008: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: anacron main process (20203) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 883.134 msecs
PM: late suspend of devices complete after 13.244 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.788 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 105
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.897 msecs
PM: early resume of devices complete after 15.886 msecs
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2409.914 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 1-2.2: USB disconnect, device number 12
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 13 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input22
hid-generic 0003:258A:1005.0009: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
init: anacron main process (20448) killed by TERM signal
wlan0: authenticate with d4:ca:6d:97:44:64
wlan0: send auth to d4:ca:6d:97:44:64 (try 1/3)
wlan0: authenticated
wlan0: associate with d4:ca:6d:97:44:64 (try 1/3)
wlan0: RX AssocResp from d4:ca:6d:97:44:64 (capab=0x431 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: upstart-udev-bridge main process (317) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (438) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (811) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (21254) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (21267) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (21270) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (24434) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (24445) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (24448) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (24472) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (24485) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (24488) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (24517) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (24523) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (24527) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (24553) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (24567) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (24570) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: samba-ad-dc main process (25291) terminated with status 1
init: anacron main process (29097) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from d4:ca:6d:97:44:64 by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
PM: suspend of devices complete after 937.316 msecs
PM: late suspend of devices complete after 13.875 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.506 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
Broke affinity for irq 105
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.902 msecs
PM: early resume of devices complete after 15.888 msecs
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2423.363 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
usb 1-2.2: USB disconnect, device number 13
video LNXVIDEO:00: Restoring backlight state
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-2.2: new low-speed USB device number 14 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input23
hid-generic 0003:258A:1005.000A: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 2/3)
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 3/3)
wlan0: authentication with 10:fe:ed:f0:c3:cd timed out
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: anacron main process (29343) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 890.031 msecs
PM: late suspend of devices complete after 13.429 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.793 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 17
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.889 msecs
PM: early resume of devices complete after 15.889 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2350.992 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-2.2: USB disconnect, device number 14
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 15 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input24
hid-generic 0003:258A:1005.000B: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
PM: suspend of devices complete after 898.989 msecs
PM: late suspend of devices complete after 13.702 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.495 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.900 msecs
PM: early resume of devices complete after 15.889 msecs
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2355.216 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-2.2: USB disconnect, device number 15
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 16 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input25
hid-generic 0003:258A:1005.000C: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
init: anacron main process (30668) killed by TERM signal
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=1)
wlan0: associated
init: anacron main process (31702) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
wlan0: deauthenticating from 10:fe:ed:f0:c3:cd by local choice (reason=3)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 938.754 msecs
PM: late suspend of devices complete after 13.787 msecs
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 47.522 msecs
ACPI: Preparing to enter system sleep state S3
ACPI Error: No handler for Region [ECF2] (ffff880179aa2090) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_PTS] (Node ffff880179ab6758), AE_NOT_EXIST (20131115/psparse-536)
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
CPU1: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3: Thermal monitoring handled by SMI
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.898 msecs
PM: early resume of devices complete after 15.886 msecs
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
ath: phy0: ASPM enabled: 0x42
r8169 0000:01:00.1 eth0: link down
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:04 failed to resume: error -19
usb 1-2: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431a480
usb 1-4: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017431ab80
usb 1-2.1: reset full-speed USB device number 4 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab40
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740babc0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801740bab80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412eac0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017412ea80
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2359.256 msecs
PM: Finishing wakeup.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Restarting tasks ... done.
usb 1-2.2: USB disconnect, device number 16
video LNXVIDEO:00: Restoring backlight state
usb 1-2.2: new low-speed USB device number 17 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=258a, idProduct=1005
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Composite Device
usb 1-2.2: Manufacturer: SINO WEALTH
usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input26
hid-generic 0003:258A:1005.000D: input,hiddev0,hidraw0: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2.2/input0
wlan0: authenticate with 10:fe:ed:f0:c3:cd
wlan0: send auth to 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: authenticated
wlan0: associate with 10:fe:ed:f0:c3:cd (try 1/3)
wlan0: RX AssocResp from 10:fe:ed:f0:c3:cd (capab=0x411 status=0 aid=2)
wlan0: associated
type=1400 audit(1413402162.027:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4137 comm="apparmor_parser"
type=1400 audit(1413402162.027:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4137 comm="apparmor_parser"
type=1400 audit(1413402162.027:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4137 comm="apparmor_parser"
perf samples too long (5011 > 5000), lowering kernel.perf_event_max_sample_rate to 25000