dmesg - test2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.29.2.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Tue Sep 9 21:36:05 UTC 2014
Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf730000 (usable)
BIOS-e820: 00000000bf730000 - 00000000bf73e000 (ACPI data)
BIOS-e820: 00000000bf73e000 - 00000000bf7a0000 (ACPI NVS)
BIOS-e820: 00000000bf7a0000 - 00000000bf7b0000 (reserved)
BIOS-e820: 00000000bf7bc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001840000000 (usable)
DMI present.
SMBIOS version 2.6 @ 0xFB7D0
DMI: Dell C6100 /0D61XP, BIOS 1.71 09/17/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E7FFF write-protect
E8000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask F000000000 write-back
1 base 1000000000 mask F800000000 write-back
2 base 1800000000 mask FFC0000000 write-back
3 base 00C0000000 mask FFC0000000 uncachable
4 base 00BF800000 mask FFFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 64GB, type WB
reg 1, base: 64GB, range: 32GB, type WB
reg 2, base: 96GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 3064MB, range: 8MB, type UC
total RAM covered: 98296M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 32GB, type WB
reg 7, base: 64GB, range: 32GB, type WB
reg 8, base: 96GB, range: 1GB, type WB
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf730 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf730000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf730000 page 4k
kernel direct mapping tables up to bf730000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000001840000000
0100000000 - 1840000000 page 1G
kernel direct mapping tables up to 1840000000 @ a000-b000
RAMDISK: 3714c000 - 37fefb7b
ACPI: RSDP 00000000000fa6f0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf730100 0006C (v01 091713 XSDT2129 20130917 MSFT 00000097)
ACPI: FACP 00000000bf730290 000F4 (v04 091713 FACP2129 20130917 MSFT 00000097)
ACPI: DSDT 00000000bf730540 048F7 (v02 5442B 5442B171 00000171 INTL 20051117)
ACPI: FACS 00000000bf73e000 00040
ACPI: APIC 00000000bf730390 0011E (v02 091713 APIC2129 20130917 MSFT 00000097)
ACPI: SPCR 00000000bf7304b0 00050 (v01 091713 SPCR2129 20130917 MSFT 00000097)
ACPI: MCFG 00000000bf730500 0003C (v01 091713 OEMMCFG 20130917 MSFT 00000097)
ACPI: OEMB 00000000bf73e040 00082 (v01 091713 OEMB2129 20130917 MSFT 00000097)
ACPI: SRAT 00000000bf73a540 001D0 (v02 091713 OEMSRAT 00000001 INTL 00000001)
ACPI: HPET 00000000bf73a710 00038 (v01 091713 OEMHPET 20130917 MSFT 00000097)
ACPI: DMAR 00000000bf73e0d0 000D8 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf7421e0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 0 PXM 0 100000000-c40000000
SRAT: Node 1 PXM 1 c40000000-1840000000
NUMA: Allocated memnodemap from a000 - 3a840
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000c40000000
NODE_DATA [000000000003a840 - 000000000006e83f]
bootmap [0000000000100000 - 0000000000287fff] pages 188
(8 early reservations) ==> bootmem [0000000000 - 0c40000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [003714c000 - 0037fefb7b] RAMDISK ==> [003714c000 - 0037fefb7b]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0002021000 - 0002021319] BRK ==> [0002021000 - 0002021319]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000003a840] MEMNODEMAP ==> [000000a000 - 000003a840]
Bootmem setup node 1 0000000c40000000-0000001840000000
NODE_DATA [0000000c40000040 - 0000000c4003403f]
bootmap [0000000c40035000 - 0000000c401b4fff] pages 180
(8 early reservations) ==> bootmem [0c40000000 - 1840000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002020aa4] TEXT DATA BSS
#3 [003714c000 - 0037fefb7b] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [0002021000 - 0002021319] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000003a840] MEMNODEMAP
found SMP MP-table at [ffff8800000ff780] ff780
Reserving 135MB of memory at 48MB for crashkernel (System RAM: 99328MB)
[ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
[ffffea000f800000-ffffea002adfffff] PMD -> [ffff880038000000-ffff8800535fffff] on node 0
[ffffea002ae00000-ffffea003fffffff] PMD -> [ffff880c40200000-ffff880c553fffff] on node 1
[ffffea0040000000-ffffea0054dfffff] PMD -> [ffff880c55600000-ffff880c6a3fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01840000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000bf730
0: 0x00100000 -> 0x00c40000
1: 0x00c40000 -> 0x01840000
On node 0 totalpages: 12580557
DMA zone: 56 pages used for memmap
DMA zone: 150 pages reserved
DMA zone: 3791 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765800 pages, LIFO batch:31
Normal zone: 161280 pages used for memmap
Normal zone: 11635200 pages, LIFO batch:31
On node 1 totalpages: 12582912
Normal zone: 172032 pages used for memmap
Normal zone: 12410880 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 24 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf730000 - 00000000bf73e000
PM: Registered nosave memory: 00000000bf73e000 - 00000000bf7a0000
PM: Registered nosave memory: 00000000bf7a0000 - 00000000bf7b0000
PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7bc000
PM: Registered nosave memory: 00000000bf7bc000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 09 10 11 16 18 20 22 -- -- -- --
pcpu-alloc: [1] 04 05 06 07 12 13 14 15 17 19 21 23 -- -- -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 24815671
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=135M@0M rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 99037740k/101711872k available (5330k kernel code, 1057996k absent, 1616136k reserved, 7008k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1008
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 402653184 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.059 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.11 BogoMIPS (lpj=2400059)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21786 entries in 86 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fbffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020f6
dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
dmar: RMRR base: 0x000000bf7ec000 end: 0x000000bf7fffff
dmar: ATSR flags: 0x0
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Booting Node 1, Processors #4 #5 #6 #7 Ok.
Booting Node 0, Processors #8 #9 #10 #11 Ok.
Booting Node 1, Processors #12 #13 #14 #15
Brought up 16 CPUs
Total of 16 processors activated (76800.24 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bf73e000 (401408 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
_OSC request data:1 1f
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfbef8000-0xfbefbfff 64bit]
pci 0000:00:16.1: reg 10: [mem 0xfbef4000-0xfbef7fff 64bit]
pci 0000:00:16.2: reg 10: [mem 0xfbef0000-0xfbef3fff 64bit]
pci 0000:00:16.3: reg 10: [mem 0xfbeec000-0xfbeeffff 64bit]
pci 0000:00:16.4: reg 10: [mem 0xfbee8000-0xfbeebfff 64bit]
pci 0000:00:16.5: reg 10: [mem 0xfbee4000-0xfbee7fff 64bit]
pci 0000:00:16.6: reg 10: [mem 0xfbee0000-0xfbee3fff 64bit]
pci 0000:00:16.7: reg 10: [mem 0xfbedc000-0xfbedffff 64bit]
pci 0000:00:1d.0: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1d.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1d.2: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1d.7: reg 10: [mem 0xfbeda000-0xfbeda3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.3: reg 10: [mem 0xfbed8000-0xfbed80ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1f.5: reg 10: [io 0xb400-0xb407]
pci 0000:00:1f.5: reg 14: [io 0xb080-0xb083]
pci 0000:00:1f.5: reg 18: [io 0xb000-0xb007]
pci 0000:00:1f.5: reg 1c: [io 0xac00-0xac03]
pci 0000:00:1f.5: reg 20: [io 0xa880-0xa88f]
pci 0000:00:1f.5: reg 24: [io 0xa800-0xa80f]
pci 0000:01:00.0: reg 10: [mem 0xfbae0000-0xfbafffff]
pci 0000:01:00.0: reg 14: [mem 0xfbac0000-0xfbadffff]
pci 0000:01:00.0: reg 18: [io 0xcc00-0xcc1f]
pci 0000:01:00.0: reg 1c: [mem 0xfba9c000-0xfba9ffff]
pci 0000:01:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 10: [mem 0xfba60000-0xfba7ffff]
pci 0000:01:00.1: reg 14: [mem 0xfba40000-0xfba5ffff]
pci 0000:01:00.1: reg 18: [io 0xc880-0xc89f]
pci 0000:01:00.1: reg 1c: [mem 0xfba1c000-0xfba1ffff]
pci 0000:01:00.1: reg 30: [mem 0xfba20000-0xfba3ffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 14: [mem 0xfbb3c000-0xfbb3ffff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xfbb40000-0xfbb7ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfbb80000-0xfbbfffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 20: [mem 0xfbcde000-0xfbcdffff]
pci 0000:04:00.0: reg 24: [mem 0xfbce0000-0xfbcfffff]
pci 0000:04:00.0: reg 30: [mem 0xfbd00000-0xfbdfffff pref]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfbc00000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:04.0: reg 10: [mem 0xfb000000-0xfb7fffff]
pci 0000:05:04.0: reg 14: [mem 0xfafe0000-0xfaffffff]
pci 0000:05:04.0: reg 18: [io 0xec00-0xec7f]
pci 0000:05:04.0: supports D1 D2
pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:04.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfb7fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:05:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:04.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfbf00000-0xfbffffff]
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfec8a000-0xfec8afff]
pnp 00:01: [mem 0xfed10000-0xfed10fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0062-0x0063]
pnp 00:06: [io 0x0065-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [io 0x0800-0x087f]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0500-0x057f]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
pnp 00:06: [mem 0xfed20000-0xfed3ffff]
pnp 00:06: [mem 0xfed40000-0xfed8ffff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0ca2]
pnp 00:07: [io 0x0ca3]
pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x000c0000-0x000cffff]
pnp 00:0b: [mem 0x000e0000-0x000fffff]
pnp 00:0b: [mem 0x00100000-0xbfffffff]
pnp 00:0b: [mem 0xfed90000-0xffffffff]
pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:02:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:02:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:02:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0b: disabling [mem 0x00100000-0xbfffffff] because it overlaps 0000:02:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] could not be reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: BAR 7: can't assign mem (size 0x20000)
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: BAR 10: can't assign mem (size 0x20000)
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: BAR 7: can't assign mem (size 0x20000)
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.1: BAR 10: can't assign mem (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:02:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:02:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:02:00.0: reg 17c: [mem 0x00000000-0x0003ffff 64bit]
pci 0000:02:00.0: BAR 9: can't assign mem (size 0x400000)
pci 0000:02:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 174: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: BAR 7: can't assign mem (size 0x40000)
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xfbc00000-0xfbdfffff]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfb7fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 7 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 8 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbdfffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfaf00000-0xfb7fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03bb]
pci_bus 0000:05: resource 7 [io 0x03c0-0x03df]
pci_bus 0000:05: resource 8 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:05: resource 12 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:05:04.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14990k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1412990205.592:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 79260F30C3A48D00
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:07: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:07: Found new BMC (man_id: 0x005059, prod_id: 0x0037, dev_id: 0x25)
ipmi_si 00:07: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf73e1b0 02FB4 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf741170 00980 (v01 PmRef P001Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bf741af0 006E2 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbeda000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.29.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.29.2.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.29.2.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.29.2.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-10-11 01:16:47 UTC (1412990207)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 796k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 15.101.00.00 loaded
scsi0 : Fusion MPT SAS Host
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
mpt2sas 0000:02:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (99056392 kB)
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:02:00.0: irq 48 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 48
mpt2sas0: iomem(0x00000000fbb3c000), mapped(0xffffc9001ce50000), size(16384)
mpt2sas0: ioport(0x000000000000d000), size(256)
mpt2sas0: sending diag reset !!
usb 1-5: new high speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 2400.084 MHz.
Switching to clocksource tsc
usb 1-5: New USB device found, idVendor=046b, idProduct=ff01
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Generic Hub
usb 1-5: Manufacturer: American Megatrends Inc.
usb 1-5: SerialNumber: serial
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 3 ports detected
usb 2-1: new low speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=413c, idProduct=2105
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Dell USB Keyboard
usb 2-1: Manufacturer: Dell
usb 2-1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
usb 1-5.1: new low speed USB device number 4 using ehci_hcd
usb 1-5.1: New USB device found, idVendor=046b, idProduct=ff10
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1: Product: Virtual Keyboard and Mouse
usb 1-5.1: Manufacturer: American Megatrends Inc.
usb 1-5.1: SerialNumber: serial
usb 1-5.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input4
generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input5
generic-usb 0003:046B:FF10.0003: input,hidraw2: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.7-5.1/input1
usb 1-5.3: new high speed USB device number 5 using ehci_hcd
usb 1-5.3: New USB device found, idVendor=046b, idProduct=ff20
usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.3: Product: Virtual Cdrom Device
usb 1-5.3: Manufacturer: American Megatrends Inc.
usb 1-5.3: SerialNumber: serial
usb 1-5.3: configuration #1 chosen from 1 choice
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(3392 kB)
mpt2sas0: Current Controller Queue Depth(1483), Max Controller Queue Depth(1720)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(17.00.01.00), ChipRevision(0x03), BiosVersion(07.33.00.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500a0d10004ec790), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access SEAGATE ST9600205SS CS09 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x000d), sas_addr(0x5000c5004725f555), phy(3), device_name(0x5000c5004725f554)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x500a0d10004ec790), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access SEAGATE ST9600205SS CS09 PQ: 0 ANSI: 6
scsi 0:0:1:0: SSP: handle(0x0009), sas_addr(0x5000c50047257ee5), phy(0), device_name(0x5000c50047257ee4)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x500a0d10004ec790), slot(3)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:2:0: Direct-Access ATA INTEL SSDSA2BW16 0362 PQ: 0 ANSI: 6
scsi 0:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221105000000), phy(5), device_name(0x5001517972e6c38a)
scsi 0:0:2:0: SATA: enclosure_logical_id(0x500a0d10004ec790), slot(6)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:3:0: Direct-Access SEAGATE ST9600205SS CS09 PQ: 0 ANSI: 6
scsi 0:0:3:0: SSP: handle(0x000b), sas_addr(0x5000c50047257e7d), phy(1), device_name(0x5000c50047257e7c)
scsi 0:0:3:0: SSP: enclosure_logical_id(0x500a0d10004ec790), slot(2)
scsi 0:0:3:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:4:0: Direct-Access SEAGATE ST9600205SS CS09 PQ: 0 ANSI: 6
scsi 0:0:4:0: SSP: handle(0x000c), sas_addr(0x5000c50047257011), phy(2), device_name(0x5000c50047257010)
scsi 0:0:4:0: SSP: enclosure_logical_id(0x500a0d10004ec790), slot(1)
scsi 0:0:4:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:5:0: Direct-Access SEAGATE ST9600205SS CS09 PQ: 0 ANSI: 6
scsi 0:0:5:0: SSP: handle(0x000e), sas_addr(0x5000c500472644f5), phy(4), device_name(0x5000c500472644f4)
scsi 0:0:5:0: SSP: enclosure_logical_id(0x500a0d10004ec790), slot(7)
scsi 0:0:5:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
ata_piix 0000:00:1f.5: version 2.13
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19
ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
sd 0:0:1:0: [sdb] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:2:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:3:0: [sdd] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:4:0: [sde] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:5:0: [sdf] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:0:0: [sda] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: d7 00 10 08
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:3:0: [sdd] Mode Sense: d7 00 10 08
sd 0:0:4:0: [sde] Write Protect is off
sd 0:0:4:0: [sde] Mode Sense: d7 00 10 08
sd 0:0:5:0: [sdf] Write Protect is off
sd 0:0:5:0: [sdf] Mode Sense: d7 00 10 08
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: d7 00 10 08
sd 0:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 7f 00 10 08
sdb:
sdd:
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdf:
sde:
sda: sda1 sda2
sdb1 sdb2 sdb3 sdb4
sdd1 sdd2 sdd3 sdd4
sd 0:0:0:0: [sda] Attached SCSI disk
sdf1 sdf2 sdf3 sdf4
sde1 sde2 sde3 sde4
sd 0:0:3:0: [sdd] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sdc: unknown partition table
sd 0:0:5:0: [sdf] Attached SCSI disk
sd 0:0:4:0: [sde] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_home' [504.42 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [4.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1412990217.675:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
usb-storage: device scan complete
scsi 3:0:0:0: CD-ROM AMI Virtual CDROM 1.00 PQ: 0 ANSI: 0 CCS
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Sep 9 2014
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.0: irq 49 for MSI/MSI-X
ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.1: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.1: irq 50 for MSI/MSI-X
ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.2: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.2: irq 51 for MSI/MSI-X
ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.3: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.3: irq 52 for MSI/MSI-X
ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.4: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.4: irq 53 for MSI/MSI-X
ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.5: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.5: irq 54 for MSI/MSI-X
ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.6: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.6: irq 55 for MSI/MSI-X
ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.7: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
ioatdma 0000:00:16.7: irq 56 for MSI/MSI-X
ACPI: resource (null) [io 0x0828-0x082f] conflicts with ACPI region PMRG [io 0x800-0x84f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io 0x0500-0x053f] conflicts with ACPI region GPSE [io 0x500-0x53f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.0: irq 65 for MSI/MSI-X
igb 0000:01:00.0: irq 57 for MSI/MSI-X
igb 0000:01:00.0: irq 58 for MSI/MSI-X
igb 0000:01:00.0: irq 59 for MSI/MSI-X
igb 0000:01:00.0: irq 60 for MSI/MSI-X
igb 0000:01:00.0: irq 61 for MSI/MSI-X
igb 0000:01:00.0: irq 62 for MSI/MSI-X
igb 0000:01:00.0: irq 63 for MSI/MSI-X
igb 0000:01:00.0: irq 64 for MSI/MSI-X
igb 0000:01:00.0: irq 65 for MSI/MSI-X
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:8c:fa:00:0e:ec
igb 0000:01:00.0: eth0: PBA No: Unknown
igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:01:00.1: setting latency timer to 64
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
igb 0000:01:00.1: irq 74 for MSI/MSI-X
igb 0000:01:00.1: irq 66 for MSI/MSI-X
igb 0000:01:00.1: irq 67 for MSI/MSI-X
igb 0000:01:00.1: irq 68 for MSI/MSI-X
igb 0000:01:00.1: irq 69 for MSI/MSI-X
igb 0000:01:00.1: irq 70 for MSI/MSI-X
igb 0000:01:00.1: irq 71 for MSI/MSI-X
igb 0000:01:00.1: irq 72 for MSI/MSI-X
igb 0000:01:00.1: irq 73 for MSI/MSI-X
igb 0000:01:00.1: irq 74 for MSI/MSI-X
igb 0000:01:00.1: added PHC on eth1
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:8c:fa:00:0e:ed
igb 0000:01:00.1: eth1: PBA No: Unknown
igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:3:0: Attached scsi generic sg3 type 0
sd 0:0:4:0: Attached scsi generic sg4 type 0
sd 0:0:5:0: Attached scsi generic sg5 type 0
sr 3:0:0:0: Attached scsi generic sg6 type 5
udev: renamed network interface eth1 to em2
udev: renamed network interface eth0 to em1
iomemory_vsl: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
fioinf VSL configuration hash: 3568746eba0d357fb2c894996fdf722c130e96a8
fioinf
fioinf Copyright (c) 2006-2014 Fusion-io, Inc. All rights reserved.
fioinf For Terms and Conditions see the License file included
fioinf with this driver package.
fioinf
fioinf ioDrive driver 3.2.8.1350 pinnacles@092208b77190 loading...
iodrive 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iodrive 0000:04:00.0: setting latency timer to 64
fioinf ioDrive 0000:04:00.0: mapping controller on BAR 5
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
iodrive 0000:04:00.0: irq 75 for MSI/MSI-X
fioinf ioDrive 0000:04:00.0: MSI enabled
fioinf ioDrive 0000:04:00.0: using MSI interrupts
fioinf ioDrive 0000:04:00.0.0: Starting master controller
md: bind
md: bind
md: bind
md: bind
fioinf ioDrive 0000:04:00.0.0: SMP Controller Firmware APP version 1.0.6 0
fioinf ioDrive 0000:04:00.0.0: SMP Controller Firmware BOOT version 1.0.4 1
fioinf ioDrive 0000:04:00.0.0: Required PCIE bandwidth 2.000 GBytes per sec
fioinf ioDrive 0000:04:00.0.0: Default capacity 1650.000 GBytes
fioinf ioDrive 0000:04:00.0.0: Default sector size 512 bytes
fioinf ioDrive 0000:04:00.0.0: Rated endurance 8.00 PBytes
fioinf ioDrive 0000:04:00.0.0: 85C temp range hardware found
fioinf ioDrive 0000:04:00.0.0: Maximum capacity 1650.000 GBytes
fioinf ioDrive 0000:04:00.0.0: Firmware version 7.1.13 109322 (0x70040d 0x1ab0a)
fioinf ioDrive 0000:04:00.0.0: Platform version 19
fioinf ioDrive 0000:04:00.0.0: Firmware VCS version 109322 [0x1ab0a]
fioinf ioDrive 0000:04:00.0.0: Firmware VCS uid 0x02a0b00fd435f92c3cebbf431f69bd563a77cfe3
fioinf ioDrive 0000:04:00.0.0: Powercut flush: Enabled
fioinf ioDrive 0000:04:00.0.0: PCIe power monitor enabled (master). Limit set to 24.750 watts.
fioinf ioDrive 0000:04:00.0.0: Thermal monitoring: Enabled
fioinf ioDrive 0000:04:00.0.0: Hardware temperature alarm set for 85C.
fioinf ioDrive 0000:04:00.0: Found device fct0 (Fusion-io 1.65TB ioScale2 0000:04:00.0) on pipeline 0
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: probed fct0
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: sector_size=512
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: setting channel range data to [2 .. 4095]
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: Found metadata in EBs 5-6, loading...
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: setting recovered append point 6+488816640
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: Creating device of size 1650000000000 bytes with 3222656250 sectors of 512 bytes (0 mapped).
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: Creating block device fioa: major: 252 minor: 0 sector size: 512...
fioa: unknown partition table
fioinf Fusion-io 1.65TB ioScale2 0000:04:00.0: Attach succeeded.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
device-mapper: table: 253:2: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
device-mapper: table: 253:2: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
md: raid1 personality registered for level 1
bio: create slab at 1
md/raid1:md127: active with 4 out of 6 mirrors
md127: detected capacity change from 0 to 209649664
RAID1 conf printout:
--- wd:4 rd:6
disk 1, wo:0, o:1, dev:sdb3
disk 2, wo:0, o:1, dev:sdd3
disk 3, wo:0, o:1, dev:sde3
disk 4, wo:0, o:1, dev:sdf3
md127: unknown partition table
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 4194300k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:4194300k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ADDRCONF(NETDEV_UP): em1: link is not ready
igb: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
ADDRCONF(NETDEV_UP): em2: link is not ready
igb: em2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): em2: link becomes ready
em1: no IPv6 routers present
em2: no IPv6 routers present
usb 1-5.3: USB disconnect, device number 5
ip_tables: (C) 2000-2006 Netfilter Core Team
sdc:
fioa:
fioa: fioa1
kjournald starting. Commit interval 5 seconds
EXT3-fs (fioa1): using internal journal
EXT3-fs (fioa1): mounted filesystem with ordered data mode
sdc: sdc1
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode