dmesg - GO1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-35-generic root=/dev/mapper/VolGroup00-LogVol00 ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fffefff] ACPI data
BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 05/23/2012
Hypervisor detected: Microsoft HyperV
HyperV: features 0xe7f, hints 0x2c
HyperV: LAPIC Timer Frequency: 0xc3500
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 00000000000 mask 3FF00000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[mem 0x3fc00000-0x3fdfffff] page 2M
init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
[mem 0x3c000000-0x3fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3bffffff] page 2M
init_memory_mapping: [mem 0x3fe00000-0x3ffeffff]
[mem 0x3fe00000-0x3ffeffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x3599c000-0x36cc5fff]
ACPI: RSDP 00000000000f56f0 000014 (v00 ACPIAM)
ACPI: RSDT 000000003fff0000 000040 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: FACP 000000003fff0200 000081 (v02 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: DSDT 000000003fff1724 002E78 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
ACPI: FACS 000000003ffff000 000040
ACPI: WAET 000000003fff1480 000028 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: SLIC 000000003fff14c0 000176 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: OEM0 000000003fff16c0 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: SRAT 000000003fff0600 0001D0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
ACPI: APIC 000000003fff0300 00024C (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: OEMB 000000003ffff040 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
SRAT: Node 0 PXM 0 [mem 0x40200000-0xf7ffffff] hotplug
SRAT: Node 0 PXM 0 [mem 0x100000000-0xfdfffffff] hotplug
SRAT: Node 0 PXM 0 [mem 0x1000000000-0x100281fffff] hotplug
Initmem setup node 0 [mem 0x00000000-0x3ffeffff]
NODE_DATA [mem 0x3ffeb000-0x3ffeffff]
[ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262030
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 258032 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 64 CPUs, 48 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x40000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88003de00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Built 1 zonelists in Node order, mobility grouping on. Total pages: 257913
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-35-generic root=/dev/mapper/VolGroup00-LogVol00 ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 988056K/1048120K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 60064K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=64.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-63.
NR_IRQS:16640 nr_irqs:1192 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using PMTIMER reference calibration
tsc: Detected 2599.902 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.80 BogoMIPS (lpj=10399608)
pid_max: default: 65536 minimum: 512
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 1 MCE banks
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (fam: 06, model: 3e, stepping: 04)
Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (83196.86 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3ffff000-0x3fffffff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 1:05:09, date: 09/27/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xfe0000000-0xfffefffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfffbffff]
pci 0000:00:00.0: [8086:7192] type 00 class 0x060000
pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
pci 0000:00:07.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI
pci 0000:00:08.0: [1414:5353] type 00 class 0x030000
pci 0000:00:08.0: reg 0x10: [mem 0xf8000000-0xfbffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 0F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:08.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource hyperv_clocksource
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:09: [io 0x01e0-0x01ef] has been reserved
system 00:09: [io 0x0160-0x016f] has been reserved
system 00:09: [io 0x0278-0x027f] has been reserved
system 00:09: [io 0x0378-0x037f] has been reserved
system 00:09: [io 0x0678-0x067f] has been reserved
system 00:09: [io 0x0778-0x077f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io 0x0400-0x043f] has been reserved
system 00:0a: [io 0x0370-0x0371] has been reserved
system 00:0a: [io 0x0440-0x044f] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xf7ffffff] could not be reserved
system 00:0b: [mem 0xfffc0000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffefffff]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfffbffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:08.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19624K (ffff88003599c000 - ffff880036cc6000)
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU2 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU3 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU4 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU5 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU6 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU7 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU8 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU9 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU10 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU11 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU12 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU13 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU14 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: CPU15 sig=0x306e4, pf=0x1, revision=0xffffffff
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1411779908.968:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1968
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 800x600x32, linelength=3200, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf8000000, mapped to 0xffffc90000200000, using 1920k, total 1920k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 62
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:07.1: version 2.13
ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:662:54
rtc_cmos 00:01: setting system clock to 2014-09-27 01:05:10 UTC (1411779910)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.01: host indicates ignore ATA devices, ignored
ata1.00: host indicates ignore ATA devices, ignored
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[297]: starting version 204
Floppy drive(s): fd0 is 1.44M
hv_vmbus: Hyper-V Host Build:9600-6.3-17-0.17039; Vmbus version:3.0
FDC 0 is an 82078.
tsc: Refined TSC clocksource calibration: 2599.998 MHz
psmouse serio1: alps: Unknown ALPS touchpad: E7=12 00 64, EC=12 00 64
psmouse serio1: trackpoint: failed to get extended button data
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_util
hv_vmbus: registering driver hv_storvsc
hv_vmbus: registering driver hv_netvsc
scsi2 : storvsc_host_t
scsi 2:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
hv_storvsc vmbus_0_2: cmd 0x0 scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88003889f100 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 4194304000 512-byte logical blocks: (2.14 TB/1.95 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi3 : storvsc_host_t
scsi 3:0:1:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
sd 3:0:1:0: Attached scsi generic sg1 type 0
sd 3:0:1:0: [sdb] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 3:0:1:0: [sdb] 4096-byte physical blocks
sd 3:0:1:0: [sdb] Write Protect is off
sd 3:0:1:0: [sdb] Mode Sense: 0f 00 00 00
sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi4 : storvsc_host_t
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
hv_netvsc: hv_netvsc channel opened successfully
sda: sda1 sda2 < sda5 >
sdb: sdb1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:1:0: [sdb] Attached SCSI disk
psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x01, buttons: 0/0
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
random: lvm urandom read with 31 bits of entropy available
bio: create slab at 1
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
hv_netvsc vmbus_0_16: Device MAC 00:1d:d8:b7:1e:7d link state up
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (412) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (422) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (425) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (428) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (429) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (431) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (432) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (434) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (435) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (437) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (438) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 2096124k swap on /dev/sdb1. Priority:-1 extents:1 across:2096124k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[543]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
hv_vmbus: registering driver hyperv_fb
piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
hyperv_fb: Screen resolution: 1152x864, Color depth: 32
checking generic (f8000000 1e0000) vs hw (f8000000 4000000)
fb: conflicting fb hw usage hyperv_fb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 144x54
lp: driver loaded but no devices found
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
type=1400 audit(1411779871.282:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=673 comm="apparmor_parser"
type=1400 audit(1411779871.282:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=673 comm="apparmor_parser"
type=1400 audit(1411779871.282:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=673 comm="apparmor_parser"
type=1400 audit(1411779871.282:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=673 comm="apparmor_parser"
type=1400 audit(1411779871.282:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=673 comm="apparmor_parser"
type=1400 audit(1411779871.282:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=673 comm="apparmor_parser"
hv_vmbus: registering driver hv_balloon
hv_vmbus: registering driver hyperv_keyboard
input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/VMBUS:00/vmbus_0_6/serio2/input/input4
hidraw: raw HID events driver (C) Jiri Kosina
hv_vmbus: registering driver hid_hyperv
input: Microsoft Vmbus HID-compliant Mouse as /devices/virtual/input/input5
hid 0006:045E:0621.0001: input: HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
hv_storvsc vmbus_0_3: cmd 0x85 scsi status 0x2 srb status 0x6
hv_storvsc vmbus_0_3: cmd 0x85 scsi status 0x2 srb status 0x6
hv_storvsc vmbus_0_2: cmd 0x85 scsi status 0x2 srb status 0x6
hv_storvsc vmbus_0_2: cmd 0x85 scsi status 0x2 srb status 0x6
random: nonblocking pool is initialized
hv_netvsc vmbus_0_16: net device safe to remove
hv_netvsc: hv_netvsc channel opened successfully
hv_netvsc vmbus_0_16: Device MAC 00:1d:d8:b7:1e:7d link state up
init: failsafe main process (740) killed by TERM signal
type=1400 audit(1411779872.710:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=993 comm="apparmor_parser"
type=1400 audit(1411779872.710:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=991 comm="apparmor_parser"
type=1400 audit(1411779872.710:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=991 comm="apparmor_parser"
type=1400 audit(1411779872.710:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=991 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7894 buckets, 31576 max)
hv_balloon: Received INFO_TYPE_MAX_PAGE_CNT
hv_balloon: Data Size is 8
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff880037975180 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88003594d180 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x85 scsi status 0x2 srb status 0x6
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff880039573b80 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff880037986a00 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001ea3e4c0 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001ea3ea00 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001ea3ef40 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001ea3c700 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001041a680 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001041a840 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff880010418540 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff88001041bb80 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff8800104696c0 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_2: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_2: stor pkt ffff880010676140 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 2:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
init_memory_mapping: [mem 0x48000000-0x4fffffff]
[mem 0x48000000-0x4fffffff] page 2M
Built 1 zonelists in Node order, mobility grouping on. Total pages: 235743
Policy zone: DMA32
Built 1 zonelists in Node order, mobility grouping on. Total pages: 268511
Policy zone: Normal
init_memory_mapping: [mem 0x50000000-0x57ffffff]
[mem 0x50000000-0x57ffffff] page 2M
[ffffea0001200000-ffffea00013fffff] PMD -> [ffff880018000000-ffff8800181fffff] on node 0