dmesg - adfd
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-36-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 (Ubuntu 3.13.0-36.63-generic 3.13.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x00000000b6bd4fff] usable
BIOS-e820: [mem 0x00000000b6bd5000-0x00000000b6cd4fff] reserved
BIOS-e820: [mem 0x00000000b6cd5000-0x00000000b6ed4fff] type 20
BIOS-e820: [mem 0x00000000b6ed5000-0x00000000b74d4fff] reserved
BIOS-e820: [mem 0x00000000b74d5000-0x00000000b75d4fff] ACPI NVS
BIOS-e820: [mem 0x00000000b75d5000-0x00000000b7614fff] ACPI data
BIOS-e820: [mem 0x00000000b7615000-0x00000000b7ffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by EDK II
efi: ACPI=0xb7614000 ACPI 2.0=0xb7614014 SMBIOS=0xb74d4000
efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001501000) (20MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000001501000-0x0000000002000000) (10MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003401000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000003401000-0x0000000020000000) (459MB)
efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000020100000-0x0000000035b5a000) (346MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000035b5a000-0x0000000036da5000) (18MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000036da5000-0x0000000080aa0000) (1180MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000080aa0000-0x00000000ae000000) (725MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000ae000000-0x00000000ae020000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000ae020000-0x00000000b3bcb000) (91MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000b3bcb000-0x00000000b3da1000) (1MB)
efi: mem16: type=1, attr=0xf, range=[0x00000000b3da1000-0x00000000b3ed5000) (1MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000b3ed5000-0x00000000b54de000) (22MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000b54de000-0x00000000b63d5000) (14MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000b63d5000-0x00000000b699c000) (5MB)
efi: mem20: type=2, attr=0xf, range=[0x00000000b699c000-0x00000000b69a6000) (0MB)
efi: mem21: type=3, attr=0xf, range=[0x00000000b69a6000-0x00000000b6bd5000) (2MB)
efi: mem22: type=6, attr=0x800000000000000f, range=[0x00000000b6bd5000-0x00000000b6cd5000) (1MB)
efi: mem23: type=5, attr=0x800000000000000f, range=[0x00000000b6cd5000-0x00000000b6ed5000) (2MB)
efi: mem24: type=0, attr=0xf, range=[0x00000000b6ed5000-0x00000000b74d5000) (6MB)
efi: mem25: type=10, attr=0xf, range=[0x00000000b74d5000-0x00000000b75d5000) (1MB)
efi: mem26: type=9, attr=0xf, range=[0x00000000b75d5000-0x00000000b7615000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000b7615000-0x00000000b8000000) (9MB)
efi: mem28: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem30: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
SMBIOS 2.7 present.
DMI: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS BYTICRB1.X64.0080.R21.1404041137 04/04/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FF800000 mask FFF800000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 0BAE00000 mask FFFE00000 uncachable
6 base 100000000 mask FC0000000 write-back
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xb8000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fdf000, 0x02fdffff] PGTABLE
BRK [0x02fe0000, 0x02fe0fff] PGTABLE
BRK [0x02fe1000, 0x02fe1fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20100000-0xb6bd4fff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0xb69fffff] page 2M
[mem 0xb6a00000-0xb6bd4fff] page 4k
BRK [0x02fe3000, 0x02fe3fff] PGTABLE
BRK [0x02fe4000, 0x02fe4fff] PGTABLE
init_memory_mapping: [mem 0xb7615000-0xb7ffffff]
[mem 0xb7615000-0xb77fffff] page 4k
[mem 0xb7800000-0xb7ffffff] page 2M
RAMDISK: [mem 0x35b5a000-0x36da4fff]
ACPI: RSDP 00000000b7614014 000024 (v02 INTEL )
ACPI: XSDT 00000000b76130e8 00008C (v01 INTEL EDK2 00000003 VLV2 01000013)
ACPI: FACP 00000000b7611000 00010C (v05 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: DSDT 00000000b7601000 00B893 (v02 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: FACS 00000000b754d000 000040
ACPI: SSDT 00000000b7612000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120518)
ACPI: UEFI 00000000b7556000 000042 (v01 00000000 00000000)
ACPI: HPET 00000000b7610000 000038 (v01 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: LPIT 00000000b760f000 000104 (v01 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: APIC 00000000b760e000 000084 (v03 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: MCFG 00000000b760d000 00003C (v01 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: SSDT 00000000b75fb000 000763 (v01 PmRef CpuPm 00003000 INTL 20120518)
ACPI: SSDT 00000000b75fa000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120518)
ACPI: SSDT 00000000b75f9000 00017A (v01 PmRef ApTst 00003000 INTL 20120518)
ACPI: SSDT 00000000b75f8000 0003E6 (v01 Intel_ IsctTabl 00001000 INTL 20120518)
ACPI: FPDT 00000000b75f7000 000044 (v01 INTEL EDK2 00000003 VLV2 0100000D)
ACPI: CSRT 00000000b75f6000 00014C (v00 INTEL EDK2 00000005 INTL 20120624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00090000-0x0009dfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20100000-0xb6bd4fff]
node 0: [mem 0xb7615000-0xb7ffffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1012828
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11667 pages used for memmap
DMA32 zone: 746688 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0xb6bd5000-0xb6cd4fff]
PM: Registered nosave memory: [mem 0xb6cd5000-0xb6ed4fff]
PM: Registered nosave memory: [mem 0xb6ed5000-0xb74d4fff]
PM: Registered nosave memory: [mem 0xb74d5000-0xb75d4fff]
PM: Registered nosave memory: [mem 0xb75d5000-0xb7614fff]
PM: Registered nosave memory: [mem 0xb8000000-0xbaffffff]
PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffffffff]
e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 996979
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3858084K/4051312K available (7373K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 193228K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16252928 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1916.743 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3833.48 BogoMIPS (lpj=7666972)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU E3845 @ 1.91GHz (fam: 06, model: 37, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15333.94 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb74d5000-0xb75d4fff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 12:06:19, date: 10/03/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000b74cdc18 000395 (v01 PmRef Cpu0Ist 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000395 (v01 PmRef Cpu0Ist 00003000 INTL 20120518)
ACPI: SSDT 00000000b74cc918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
ACPI: SSDT 00000000b74cfe18 00015F (v01 PmRef ApIst 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20120518)
ACPI: SSDT 00000000b74cef18 00008D (v01 PmRef ApCst 00003000 INTL 20120518)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20120518)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xc8c00000-0xc8ffffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xc88ffffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc8000000-0xc83fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xc7ffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0x1050-0x1057]
pci 0000:00:11.0: [8086:0f15] type 00 class 0x080501
pci 0000:00:11.0: reg 0x10: [mem 0xc883e000-0xc883efff]
pci 0000:00:11.0: reg 0x14: [mem 0xc883d000-0xc883dfff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
pci 0000:00:12.0: reg 0x10: [mem 0xc883c000-0xc883cfff]
pci 0000:00:12.0: reg 0x14: [mem 0xc883b000-0xc883bfff]
pci 0000:00:12.0: PME# supported from D0 D3hot
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0x1048-0x104f]
pci 0000:00:13.0: reg 0x14: [io 0x105c-0x105f]
pci 0000:00:13.0: reg 0x18: [io 0x1040-0x1047]
pci 0000:00:13.0: reg 0x1c: [io 0x1058-0x105b]
pci 0000:00:13.0: reg 0x20: [io 0x1020-0x103f]
pci 0000:00:13.0: reg 0x24: [mem 0xc883a000-0xc883a7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc8800000-0xc880ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
pci 0000:00:17.0: reg 0x10: [mem 0xc8838000-0xc8838fff]
pci 0000:00:17.0: reg 0x14: [mem 0xc8837000-0xc8837fff]
pci 0000:00:17.0: PME# supported from D0 D3hot
pci 0000:00:18.0: [8086:0f40] type 00 class 0x080102
pci 0000:00:18.0: reg 0x10: [mem 0xc8818000-0xc881bfff]
pci 0000:00:18.0: reg 0x14: [mem 0xc8836000-0xc8836fff]
pci 0000:00:18.1: [8086:0f41] type 00 class 0x0c8000
pci 0000:00:18.1: reg 0x10: [mem 0xc8835000-0xc8835fff]
pci 0000:00:18.1: reg 0x14: [mem 0xc8834000-0xc8834fff]
pci 0000:00:18.2: [8086:0f42] type 00 class 0x0c8000
pci 0000:00:18.2: reg 0x10: [mem 0xc8833000-0xc8833fff]
pci 0000:00:18.2: reg 0x14: [mem 0xc8832000-0xc8832fff]
pci 0000:00:18.3: [8086:0f43] type 00 class 0x0c8000
pci 0000:00:18.3: reg 0x10: [mem 0xc8831000-0xc8831fff]
pci 0000:00:18.3: reg 0x14: [mem 0xc8830000-0xc8830fff]
pci 0000:00:18.4: [8086:0f44] type 00 class 0x0c8000
pci 0000:00:18.4: reg 0x10: [mem 0xc882f000-0xc882ffff]
pci 0000:00:18.4: reg 0x14: [mem 0xc882e000-0xc882efff]
pci 0000:00:18.5: [8086:0f45] type 00 class 0x0c8000
pci 0000:00:18.5: reg 0x10: [mem 0xc882d000-0xc882dfff]
pci 0000:00:18.5: reg 0x14: [mem 0xc882c000-0xc882cfff]
pci 0000:00:18.6: [8086:0f46] type 00 class 0x0c8000
pci 0000:00:18.6: reg 0x10: [mem 0xc882b000-0xc882bfff]
pci 0000:00:18.6: reg 0x14: [mem 0xc882a000-0xc882afff]
pci 0000:00:18.7: [8086:0f47] type 00 class 0x0c8000
pci 0000:00:18.7: reg 0x10: [mem 0xc8829000-0xc8829fff]
pci 0000:00:18.7: reg 0x14: [mem 0xc8828000-0xc8828fff]
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xc8700000-0xc87fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xc8600000-0xc86fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:0f06] type 00 class 0x080102
pci 0000:00:1e.0: reg 0x10: [mem 0xc8814000-0xc8817fff]
pci 0000:00:1e.0: reg 0x14: [mem 0xc8827000-0xc8827fff]
pci 0000:00:1e.1: [8086:0f08] type 00 class 0x0c8000
pci 0000:00:1e.1: reg 0x10: [mem 0xc8826000-0xc8826fff]
pci 0000:00:1e.1: reg 0x14: [mem 0xc8825000-0xc8825fff]
pci 0000:00:1e.2: [8086:0f09] type 00 class 0x0c8000
pci 0000:00:1e.2: reg 0x10: [mem 0xc8824000-0xc8824fff]
pci 0000:00:1e.2: reg 0x14: [mem 0xc8823000-0xc8823fff]
pci 0000:00:1e.3: [8086:0f0a] type 00 class 0x078000
pci 0000:00:1e.3: reg 0x10: [mem 0xc8822000-0xc8822fff]
pci 0000:00:1e.3: reg 0x14: [mem 0xc8821000-0xc8821fff]
pci 0000:00:1e.4: [8086:0f0c] type 00 class 0x078000
pci 0000:00:1e.4: reg 0x10: [mem 0xc8820000-0xc8820fff]
pci 0000:00:1e.4: reg 0x14: [mem 0xc881f000-0xc881ffff]
pci 0000:00:1e.5: [8086:0f0e] type 00 class 0x0c8000
pci 0000:00:1e.5: reg 0x10: [mem 0xc881e000-0xc881efff]
pci 0000:00:1e.5: reg 0x14: [mem 0xc881d000-0xc881dfff]
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc881c000-0xc881c01f]
pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.3: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb6bd5000-0xb7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: [io 0x0600-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:07: [mem 0xfed0c000-0xfed0ffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs INT33bd (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8c00000-0xc8dfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8e00000-0xc8ffffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xc8400000-0xc85fffff]
pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.2: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.3: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xc8c00000-0xc8dfffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc8e00000-0xc8ffffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xc8400000-0xc85fffff]
pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.1: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc8400000-0xc85fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xc8c00000-0xc8dfffff]
pci 0000:00:1c.3: bridge window [mem 0xc8e00000-0xc8ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0xc8c00000-0xc8ffffff]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xc88ffffe]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xc8400000-0xc85fffff]
pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xc8c00000-0xc8dfffff]
pci_bus 0000:04: resource 2 [mem 0xc8e00000-0xc8ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18732K (ffff880035b5a000 - ffff880036da5000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb14de000-0xb54de000] (64MB) mapped at [ffff8800b14de000-ffff8800b54ddfff]
microcode: CPU0 sig=0x30673, pf=0x1, revision=0x321
microcode: CPU1 sig=0x30673, pf=0x1, revision=0x321
microcode: CPU2 sig=0x30673, pf=0x1, revision=0x321
microcode: CPU3 sig=0x30673, pf=0x1, revision=0x321
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1412337979.972:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7626
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90004780000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery absent)
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:1e.3: ttyS4 at MMIO 0xc8822000 (irq = 18, base_baud = 2764800) is a 16550A
0000:00:1e.4: ttyS5 at MMIO 0xc8820000 (irq = 16, base_baud = 2764800) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 38f3b6c63a85affdfbbe0e53339df8e0c6b6c9d5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:585:126
acpi device:01: hash matches
rtc_cmos 00:00: setting system clock to 2014-10-03 12:06:20 UTC (1412337980)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB 2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
atkbd serio0: Failed to enable keyboard on isa0060/serio0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 1-6: new high-speed USB device number 3 using xhci_hcd
usb 1-6: New USB device found, idVendor=0424, idProduct=2640
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 3 ports detected
usb 1-2.1: new high-speed USB device number 4 using xhci_hcd
usb 1-2.1: New USB device found, idVendor=0b95, idProduct=7720
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.1: Product: AX88x72A
usb 1-2.1: Manufacturer: ASIX Elec. Corp.
usb 1-2.1: SerialNumber: 0FA38B
usb 1-2.3: new low-speed USB device number 5 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=413c, idProduct=2107
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: Dell USB Entry Keyboard
usb 1-2.3: Manufacturer: DELL
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.4: new low-speed USB device number 6 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=05e3, idProduct=1205
usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2.4: Product: USB Mouse
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
tsc: Refined TSC clocksource calibration: 1916.665 MHz
usb 1-6.1: new high-speed USB device number 7 using xhci_hcd
usb 1-6.1: New USB device found, idVendor=0424, idProduct=4040
usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6.1: Product: Ultra Fast Media Reader
usb 1-6.1: Manufacturer: Generic
usb 1-6.1: SerialNumber: 000000264001
Switched to clocksource tsc
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
systemd-udevd[118]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:11.0: SDHCI controller found [8086:0f15] (rev c)
sdhci-pci 0000:00:11.0: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:00:11.0: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA
sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev c)
sdhci-pci 0000:00:12.0: dummy supplies not allowed
mmc1: no vqmmc regulator found
sdhci-pci 0000:00:12.0: dummy supplies not allowed
mmc1: no vmmc regulator found
mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev c)
sdhci-pci 0000:00:17.0: dummy supplies not allowed
mmc2: no vqmmc regulator found
sdhci-pci 0000:00:17.0: dummy supplies not allowed
mmc2: no vmmc regulator found
mmc2: SDHCI controller on PCI [0000:00:17.0] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usb-storage 1-6.1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 1-6.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 104 for MSI/MSI-X
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi1 : ahci
scsi2 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xc883a000 port 0xc883a180 irq 104
input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input7
hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-2.3/input0
input: USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/input/input8
hid-generic 0003:05E3:1205.0002: input,hidraw1: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:14.0-2.4/input0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: INTEL SSDSA2CT040G3, 4PC10362, max UDMA/133
ata2.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2CT04 4PC1 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 39 bits of entropy available
init: plymouth-upstart-bridge main process (177) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (190) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 4050940k swap on /dev/sda3. Priority:-1 extents:1 across:4050940k SSFS
scsi 0:0:0:0: Direct-Access Generic Ultra HS-COMBO 2.01 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sdb] Attached SCSI removable disk
systemd-udevd[300]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
dw_dmac_pci: probe of 0000:00:18.0 failed with error -2
dw_dmac_pci: probe of 0000:00:1e.0 failed with error -2
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 7f0000) vs hw (c0000000 8000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 105 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
type=1400 audit(1412355985.572:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=398 comm="apparmor_parser"
type=1400 audit(1412355985.572:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=398 comm="apparmor_parser"
type=1400 audit(1412355985.572:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=398 comm="apparmor_parser"
type=1400 audit(1412355985.576:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=398 comm="apparmor_parser"
type=1400 audit(1412355985.576:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=398 comm="apparmor_parser"
type=1400 audit(1412355985.576:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=398 comm="apparmor_parser"
[drm] failed to retrieve link info, disabling eDP
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
asix 1-2.1:1.0 eth0: register 'asix' at usb-0000:00:14.0-2.1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:a3:8b
usbcore: registered new interface driver asix
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:23: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
init: failsafe main process (574) killed by TERM signal
init: udev-fallback-graphics main process (591) terminated with status 1
random: nonblocking pool is initialized
ttyS4 - failed to request DMA
ttyS5 - failed to request DMA
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1412355986.688:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=764 comm="apparmor_parser"
type=1400 audit(1412355986.688:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
type=1400 audit(1412355986.688:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
init: cups main process (765) killed by HUP signal
init: cups main process ended, respawning
type=1400 audit(1412355986.876:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=813 comm="apparmor_parser"
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1068) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1270) terminated with status 1
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
asix 1-2.1:1.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1412356019.739:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2319 comm="apparmor_parser"
type=1400 audit(1412356019.743:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2319 comm="apparmor_parser"
type=1400 audit(1412356019.743:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2319 comm="apparmor_parser"