dmesg - CS:S
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009f78ffff] usable
BIOS-e820: [mem 0x000000009f790000-0x000000009f7e2fff] ACPI NVS
BIOS-e820: [mem 0x000000009f7e3000-0x000000009f7effff] ACPI data
BIOS-e820: [mem 0x000000009f7f0000-0x000000009fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001dfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: OEM OEM/131-GT-E767, BIOS 6.00 PG 08/25/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1e0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask F80000000 write-back
2 base 180000000 mask FC0000000 write-back
3 base 1C0000000 mask FE0000000 write-back
4 base 0A0000000 mask FE0000000 uncachable
5 base 0C0000000 mask FC0000000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f790 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f59b0-0x000f59bf] mapped at [ffff8800000f59b0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01aaf000, 0x01aaffff] PGTABLE
BRK [0x01ab0000, 0x01ab0fff] PGTABLE
BRK [0x01ab1000, 0x01ab1fff] PGTABLE
init_memory_mapping: [mem 0x1dfe00000-0x1dfffffff]
[mem 0x1dfe00000-0x1dfffffff] page 2M
BRK [0x01ab2000, 0x01ab2fff] PGTABLE
init_memory_mapping: [mem 0x1dc000000-0x1dfdfffff]
[mem 0x1dc000000-0x1dfdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1dbffffff]
[mem 0x180000000-0x1dbffffff] page 2M
BRK [0x01ab3000, 0x01ab3fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x9f78ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x9f5fffff] page 2M
[mem 0x9f600000-0x9f78ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01ab4000, 0x01ab4fff] PGTABLE
RAMDISK: [mem 0x36416000-0x37202fff]
ACPI: RSDP 00000000000f9bf0 000024 (v02 IntelR)
ACPI: XSDT 000000009f7e3080 00005C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000009f7e9780 0000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20131218/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20131218/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 0/8 (20131218/tbfadt-603)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20131218/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20131218/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20131218/tbfadt-684)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20131218/tbfadt-684)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20131218/tbfadt-684)
ACPI: DSDT 000000009f7e3200 005D3F (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 000000009f790000 000040
ACPI: HJKL 000000009f7e8f40 000400 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: ZXCV 000000009f7e9340 000424 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: HPET 000000009f7e99c0 000038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 000000009f7e9a00 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000009f7e9880 00012C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 000000009f7e9a40 001D7C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001dfffffff]
Initmem setup node 0 [mem 0x00000000-0x1dfffffff]
NODE_DATA [mem 0x1dfff7000-0x1dfffbfff]
[ffffea0000000000-ffffea00069fffff] PMD -> [ffff8801d9600000-ffff8801debfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1dfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x9f78ffff]
node 0: [mem 0x100000000-0x1dfffffff]
On node 0 totalpages: 1570606
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8875 pages used for memmap
DMA32 zone: 649104 pages, LIFO batch:31
Normal zone: 12544 pages used for memmap
Normal zone: 917504 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x10] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 16, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9f790000-0x9f7e2fff]
PM: Registered nosave memory: [mem 0x9f7e3000-0x9f7effff]
PM: Registered nosave memory: [mem 0x9f7f0000-0x9fffffff]
PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8801dfc00000 s86080 r8192 d24512 u131072
pcpu-alloc: s86080 r8192 d24512 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1549110
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6100860K/6282424K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 181564K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:33024 nr_irqs:808 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2786.025 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5572.05 BogoMIPS (lpj=11144100)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (44576.40 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9f790000-0x9f7e2fff] (339968 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfebfffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf3ffe000-0xf3ffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3ff4000-0xf3ff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf3ffd000-0xf3ffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0600 (mask 00ff)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907]
pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803]
pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707]
pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf50f]
pci 0000:00:1f.2: reg 0x24: [io 0xf400-0xf40f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffc000-0xf3ffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf200-0xf207]
pci 0000:00:1f.5: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:1f.5: reg 0x18: [io 0xf000-0xf007]
pci 0000:00:1f.5: reg 0x1c: [io 0xef00-0xef03]
pci 0000:00:1f.5: reg 0x20: [io 0xee00-0xee0f]
pci 0000:00:1f.5: reg 0x24: [io 0xed00-0xed0f]
pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xf3bfe000-0xf3bfffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:02:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:02:00.0: reg 0x10: [io 0xdf00-0xdf07]
pci 0000:02:00.0: reg 0x14: [io 0xde00-0xde03]
pci 0000:02:00.0: reg 0x18: [io 0xdd00-0xdd07]
pci 0000:02:00.0: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:02:00.0: reg 0x20: [io 0xdb00-0xdb0f]
pci 0000:02:00.0: reg 0x24: [mem 0xf3dff000-0xf3dff7ff]
pci 0000:02:00.0: reg 0x30: [mem 0xf3de0000-0xf3deffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.1: [1b4b:91a4] type 00 class 0x01018f
pci 0000:02:00.1: reg 0x10: [io 0xda00-0xda07]
pci 0000:02:00.1: reg 0x14: [io 0xd900-0xd903]
pci 0000:02:00.1: reg 0x18: [io 0xd800-0xd807]
pci 0000:02:00.1: reg 0x1c: [io 0xd700-0xd703]
pci 0000:02:00.1: reg 0x20: [io 0xd600-0xd60f]
pci 0000:02:00.1: reg 0x24: [mem 0xf3dfe000-0xf3dfe00f]
pci 0000:02:00.1: reg 0x30: [mem 0xf3de0000-0xf3deffff pref]
pci 0000:02:00.1: PME# supported from D3hot
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xf3d00000-0xf3dfffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:04:00.0: [10de:06cd] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xdc000000-0xddffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xbf00-0xbf7f]
pci 0000:04:00.0: reg 0x30: [mem 0xdff00000-0xdff7ffff pref]
pci 0000:04:00.1: [10de:0be5] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xdfffc000-0xdfffffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:07.0: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:07.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:09.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:07:00.0: reg 0x18: [mem 0xf3eff000-0xf3efffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [mem 0xf3ef8000-0xf3efbfff 64bit pref]
pci 0000:07:00.0: reg 0x30: [mem 0xf3ae0000-0xf3afffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.2: bridge window [mem 0xf3e00000-0xf3efffff 64bit pref]
pci 0000:08:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:08:03.0: reg 0x10: [mem 0xf3cff000-0xf3cff7ff]
pci 0000:08:03.0: reg 0x14: [mem 0xf3cf8000-0xf3cfbfff]
pci 0000:08:03.0: supports D1 D2
pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 5 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 *10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9f790000-0x9fffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0400-0x04bf] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0x9f800000-0x9fffffff] has been reserved
system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:09: [mem 0x9f790000-0x9f7fffff] could not be reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0x9f78ffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfed13000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: [mem 0x000e0000-0x000effff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:02:00.1: address space collision: [mem 0xf3de0000-0xf3deffff pref] conflicts with 0000:02:00.0 [mem 0xf3de0000-0xf3deffff pref]
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:02.0: BAR 15: assigned [mem 0xa0000000-0xa00fffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa02fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0300000-0xa04fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:02:00.1: BAR 6: assigned [mem 0xa0000000-0xa000ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xf3d00000-0xf3dfffff]
pci 0000:00:02.0: bridge window [mem 0xa0000000-0xa00fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:07.0: bridge window [mem 0xdc000000-0xdfffffff]
pci 0000:00:07.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa02fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0300000-0xa04fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1c.2: bridge window [mem 0xf3e00000-0xf3efffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [mem 0xf3c00000-0xf3cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf3d00000-0xf3dfffff]
pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa00fffff pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdfffffff]
pci_bus 0000:04: resource 2 [mem 0xc8000000-0xd7ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xa0100000-0xa02fffff]
pci_bus 0000:06: resource 2 [mem 0xa0300000-0xa04fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:07: resource 2 [mem 0xf3e00000-0xf3efffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xf3c00000-0xf3cfffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14260K (ffff880036416000 - ffff880037203000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9b790000-0x9f790000] (64MB) mapped at [ffff88009b790000-ffff88009f78ffff]
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x16
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1410031206.472:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11943
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-09-06 19:20:07 UTC (1410031207)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
systemd-udevd[94]: starting version 208
random: systemd-udevd urandom read with 1 bits of entropy available
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (47 C)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:07:00.0: irq 42 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
r8169 0000:07:00.0 eth0: RTL8168d/8111d at 0xffffc90000c60000, 00:1f:bc:09:51:27, XID 081000c0 IRQ 42
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 50 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.14-2-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.7: debug port 1
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.14-2-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3ffe000
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0xda00 ctl 0xd900 bmdma 0xd600 irq 17
ata2: PATA max UDMA/133 cmd 0xd800 ctl 0xd700 bmdma 0xd608 irq 17
ahci 0000:02:00.0: version 3.0
ahci 0000:02:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:02:00.0: irq 51 for MSI/MSI-X
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.7: debug port 1
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq fbs pio
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3ffd000
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff100 irq 51
ata4: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff180 irq 51
ata5: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff200 irq 51
ata6: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff280 irq 51
ata7: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff300 irq 51
ata8: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff380 irq 51
ata9: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff400 irq 51
ata10: SATA max UDMA/133 abar m2048@0xf3dff000 port 0xf3dff480 irq 51
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.14-2-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.14-2-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1a.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.14-2-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1a.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.14-2-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 3.14-2-amd64 uhci_hcd
usb usb9: SerialNumber: 0000:00:1d.1
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: UHCI Host Controller
usb usb10: Manufacturer: Linux 3.14-2-amd64 uhci_hcd
usb usb10: SerialNumber: 0000:00:1d.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi10 : ata_piix
scsi11 : ata_piix
ata11: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
ata12: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi12 : ata_piix
scsi13 : ata_piix
ata13: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
ata14: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
firewire_ohci 0000:08:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata6: SATA link down (SStatus 0 SControl 300)
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata10.00: configured for UDMA/66
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 9:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
ata13: SATA link down (SStatus 0 SControl 300)
usb 3-4: new high-speed USB device number 3 using ehci-pci
ata14: SATA link down (SStatus 0 SControl 300)
usb 3-4: New USB device found, idVendor=03f0, idProduct=3e17
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: HP LaserJet P1006
usb 3-4: Manufacturer: Hewlett-Packard
usb 3-4: SerialNumber: AC2A7A9
firewire_core 0000:08:03.0: created device fw0: GUID 696100006e566964, S400
ata11.00: SATA link down (SStatus 0 SControl 300)
ata11.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata12.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata12.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata11.01: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
ata12.00: ATA-8: Hitachi HDS722020ALA330, JKAOA28A, max UDMA/133
ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata11.01: configured for UDMA/100
scsi 10:0:1:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
ata12.01: ATA-8: ST3500418AS, CC44, max UDMA/133
ata12.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata12.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 2786.017 MHz
ata12.01: configured for UDMA/133
scsi 11:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
scsi 11:0:1:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5
scsi 9:0:0:0: Attached scsi generic sg0 type 3
scsi 10:0:1:0: Attached scsi generic sg1 type 5
scsi 11:0:0:0: Attached scsi generic sg2 type 0
scsi 11:0:1:0: Attached scsi generic sg3 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 10:0:1:0: Attached scsi CD-ROM sr0
sd 11:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 11:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 11:0:0:0: [sda] Write Protect is off
sd 11:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 11:0:1:0: [sdb] Write Protect is off
sd 11:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 11:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
sd 11:0:0:0: [sda] Attached SCSI disk
sd 11:0:1:0: [sdb] Attached SCSI disk
random: nonblocking pool is initialized
usb 6-1: new low-speed USB device number 2 using uhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 8:17 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
usb 6-1: New USB device found, idVendor=040b, idProduct=2000
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Keyboard
usb 6-1: Manufacturer: Generic
usb 7-1: new low-speed USB device number 2 using uhci_hcd
Switched to clocksource tsc
usb 7-1: New USB device found, idVendor=046d, idProduct=c21a
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Logitech(R) Precision(TM) Gamepad
usb 7-1: Manufacturer: Logitech
systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Inserted module 'autofs4'
usb 7-2: new full-speed USB device number 3 using uhci_hcd
systemd[1]: Set hostname to .
usb 7-2: New USB device found, idVendor=041e, idProduct=30dd
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-2: Product: Sound Blaster X-Fi Go! Pro
usb 7-2: Manufacturer: Creative Technology Ltd
usb 7-2: SerialNumber: 00169281
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Syslog.
systemd[1]: Reached target Syslog.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
usb 8-1: new low-speed USB device number 2 using uhci_hcd
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 8-1: New USB device found, idVendor=0461, idProduct=4d42
usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-1: Product: Dynex 5-Button Wired Optical Mouse
usb 9-1: new full-speed USB device number 2 using uhci_hcd
usb 9-1: New USB device found, idVendor=046d, idProduct=c21d
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: Gamepad F310
usb 9-1: Manufacturer: Logitech
usb 9-1: SerialNumber: C43EAD1C
fuse init (API version 7.22)
systemd-udevd[241]: starting version 208
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x00000000000004b8-0x00000000000004bb (\GPO2) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x000000000000048c-0x000000000000048f (\GPO_) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/0003:040B:2000.0001/input/input14
hid-generic 0003:040B:2000.0001: input,hidraw0: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:1a.1-1/input0
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/0003:040B:2000.0002/input/input15
hid-generic 0003:040B:2000.0002: input,hidraw1: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:1a.1-1/input1
input: Logitech Logitech(R) Precision(TM) Gamepad as /devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.0/0003:046D:C21A.0003/input/input16
hid-generic 0003:046D:C21A.0003: input,hidraw2: USB HID v1.10 Joystick [Logitech Logitech(R) Precision(TM) Gamepad] on usb-0000:00:1a.2-1/input0
input: Creative Technology Ltd Sound Blaster X-Fi Go! Pro as /devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.3/0003:041E:30DD.0004/input/input17
hid-generic 0003:041E:30DD.0004: input,hiddev0,hidraw3: USB HID v1.00 Device [Creative Technology Ltd Sound Blaster X-Fi Go! Pro] on usb-0000:00:1a.2-2/input3
input: Dynex 5-Button Wired Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.0/0003:0461:4D42.0005/input/input18
hid-generic 0003:0461:4D42.0005: input,hidraw4: USB HID v1.11 Mouse [Dynex 5-Button Wired Optical Mouse] on usb-0000:00:1d.0-1/input0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:07.0/0000:04:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:07.0/0000:04:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:07.0/0000:04:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:07.0/0000:04:00.1/sound/card1/input19
usbcore: registered new interface driver snd-usb-audio
input: Logitech Gamepad F310 as /devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input23
usbcore: registered new interface driver xpad
Adding 1951740k swap on /dev/sdb1. Priority:-1 extents:1 across:1951740k
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[222]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
WARNING! power/level is deprecated; use power/control instead
usblp 3-4:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3E17
usbcore: registered new interface driver usblp
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
r8169 0000:07:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-1.fw
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia 0000:04:00.0: irq 53 for MSI/MSI-X
r8169 0000:07:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf samples too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (6792 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:07:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usblp1: removed
hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 6-1: USB disconnect, device number 2
usb 6-1: new low-speed USB device number 3 using uhci_hcd
usb 6-1: New USB device found, idVendor=040b, idProduct=2000
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Keyboard
usb 6-1: Manufacturer: Generic
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/0003:040B:2000.0006/input/input24
hid-generic 0003:040B:2000.0006: input,hidraw0: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:1a.1-1/input0
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/0003:040B:2000.0007/input/input25
hid-generic 0003:040B:2000.0007: input,hidraw1: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:1a.1-1/input1
hub 8-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 8-1: USB disconnect, device number 2
usb 8-1: new low-speed USB device number 3 using uhci_hcd
usb 8-1: New USB device found, idVendor=0461, idProduct=4d42
usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-1: Product: Dynex 5-Button Wired Optical Mouse
input: Dynex 5-Button Wired Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.0/0003:0461:4D42.0008/input/input26
hid-generic 0003:0461:4D42.0008: input,hidraw4: USB HID v1.11 Mouse [Dynex 5-Button Wired Optical Mouse] on usb-0000:00:1d.0-1/input0
mb_warband_linu[21819]: segfault at 3f7ffffc ip 00000000f70b7806 sp 00000000eedbbcd0 error 4 in libc-2.19.so[f7041000+1a5000]
CE: hpet increased min_delta_ns to 20115 nsec
warning: process `MetroLL' used the deprecated sysctl system call with 10.1.
usb 9-1: USB disconnect, device number 2