dmesg - Intel
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x000000005d593fff] usable
BIOS-e820: [mem 0x000000005d594000-0x000000005d5c3fff] reserved
BIOS-e820: [mem 0x000000005d5c4000-0x000000005d5d3fff] ACPI data
BIOS-e820: [mem 0x000000005d5d4000-0x000000005d718fff] ACPI NVS
BIOS-e820: [mem 0x000000005d719000-0x000000005da7ffff] reserved
BIOS-e820: [mem 0x000000005da80000-0x000000005da80fff] usable
BIOS-e820: [mem 0x000000005da81000-0x000000005dac2fff] reserved
BIOS-e820: [mem 0x000000005dac3000-0x000000005dc30fff] usable
BIOS-e820: [mem 0x000000005dc31000-0x000000005dff9fff] reserved
BIOS-e820: [mem 0x000000005dffa000-0x000000005dffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900-ITX, BIOS P1.20 05/13/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FE0000000 write-back
2 base 05E800000 mask FFF800000 uncachable
3 base 05F000000 mask FFF000000 uncachable
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask F80000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1GB, range: 512MB, type WB
reg 2, base: 1512MB, range: 8MB, type UC
reg 3, base: 1520MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 2GB, type WB
total RAM covered: 7656M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1GB, range: 512MB, type WB
reg 2, base: 1512MB, range: 8MB, type UC
reg 3, base: 1520MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 2GB, type WB
e820: update [mem 0x5e800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x5e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6c0-0x000fd6cf] mapped at [ffff8800000fd6c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[mem 0x27fe00000-0x27fffffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
[mem 0x27c000000-0x27fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x27bffffff]
[mem 0x200000000-0x27bffffff] page 2M
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20100000-0x5d593fff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x5d3fffff] page 2M
[mem 0x5d400000-0x5d593fff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x5da80000-0x5da80fff]
[mem 0x5da80000-0x5da80fff] page 4k
init_memory_mapping: [mem 0x5dac3000-0x5dc30fff]
[mem 0x5dac3000-0x5dc30fff] page 4k
init_memory_mapping: [mem 0x5dffa000-0x5dffffff]
[mem 0x5dffa000-0x5dffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x34b68000-0x365abfff]
ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 000000005d5c7080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000005d5d22d8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000005d5c7188 00B150 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 000000005d718f80 000040
ACPI: APIC 000000005d5d23e8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000005d5d2470 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000005d5d24b8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: LPIT 000000005d5d24f8 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: AAFT 000000005d5d2600 0000FF (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 000000005d5d2700 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 000000005d5d2738 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 000000005d5d2ea0 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 000000005d5d3130 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 000000005d5d32b0 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x00000000-0x27fffffff]
NODE_DATA [mem 0x27fff2000-0x27fff6fff]
[ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277e00000-ffff88027f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x27fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20100000-0x5d593fff]
node 0: [mem 0x5da80000-0x5da80fff]
node 0: [mem 0x5dac3000-0x5dc30fff]
node 0: [mem 0x5dffa000-0x5dffffff]
node 0: [mem 0x100000000-0x27fffffff]
On node 0 totalpages: 1955236
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 5913 pages used for memmap
DMA32 zone: 378377 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0x5d594000-0x5d5c3fff]
PM: Registered nosave memory: [mem 0x5d5c4000-0x5d5d3fff]
PM: Registered nosave memory: [mem 0x5d5d4000-0x5d718fff]
PM: Registered nosave memory: [mem 0x5d719000-0x5da7ffff]
PM: Registered nosave memory: [mem 0x5da81000-0x5dac2fff]
PM: Registered nosave memory: [mem 0x5dc31000-0x5dff9fff]
PM: Registered nosave memory: [mem 0x5e000000-0x5effffff]
PM: Registered nosave memory: [mem 0x5f000000-0x7effffff]
PM: Registered nosave memory: [mem 0x7f000000-0xe00f7fff]
PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88027fc00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1924662
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7587984K/7820944K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 232960K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1999.835 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.67 BogoMIPS (lpj=7999340)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (fam: 06, model: 37, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15998.68 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x5d5d4000-0x5d718fff] (1331200 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:08:35, date: 08/31/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 000000005d5bcc18 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 000000005d5bb918 0003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 000000005d5c1c18 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 000000005d5bdf18 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x90816ffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0x90816000-0x908167ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x90500000-0x905fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x90400000-0x904fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90814000-0x9081401f]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0x90704000-0x90704fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0x90700000-0x90703fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0x90700000-0x907fffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:04:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:04:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:04:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:04:00.0: reg 0x24: [mem 0x90600000-0x906001ff]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0x90600000-0x906fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x5d594000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5da81000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5dc31000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs INT33bd (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.1: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.1: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0x90700000-0x907fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0x90600000-0x906fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0x90816ffe]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0x90700000-0x907fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0x90600000-0x906fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26896K (ffff880034b68000 - ffff8800365ac000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x59594000-0x5d594000] (64MB) mapped at [ffff880059594000-ffff88005d593fff]
microcode: CPU0 sig=0x30678, pf=0x4, revision=0x811
microcode: CPU1 sig=0x30678, pf=0x4, revision=0x811
microcode: CPU2 sig=0x30678, pf=0x4, revision=0x811
microcode: CPU3 sig=0x30678, pf=0x4, revision=0x811
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1409519315.996:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 14872
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:635:147
xhci_hcd 0000:00:14.0: hash matches
acpi device:18: hash matches
rtc_cmos 00:00: setting system clock to 2014-08-31 21:08:36 UTC (1409519316)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 104 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
r8169 0000:03:00.0: irq 105 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000c5e000, d0:50:99:2f:69:14, XID 0c000800 IRQ 105
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0x90816000 port 0x90816100 irq 104
ata2: DUMMY
ahci 0000:04:00.0: irq 106 for MSI/MSI-X
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m512@0x90600000 port 0x90600100 irq 106
ata4: SATA max UDMA/133 abar m512@0x90600000 port 0x90600180 irq 106
[drm] Memory usable by graphics device = 2048M
checking generic (a0000 10000) vs hw (80000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 107 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1: new high-speed USB device number 2 using xhci_hcd
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=174c, idProduct=2074
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 1-1: Product: ASM107x
usb 1-1: Manufacturer: ASRock
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
usb 1-2: new high-speed USB device number 3 using xhci_hcd
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-3: new full-speed USB device number 4 using xhci_hcd
usb 1-3: New USB device found, idVendor=046d, idProduct=c52e
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB Receiver
usb 1-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input6
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/input/input7
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=174c, idProduct=3074
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 2-1: Product: ASM107x
usb 2-1: Manufacturer: ASRock
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 1999.999 MHz
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
Switched to clocksource tsc
random: init urandom read with 93 bits of entropy available
random: nonblocking pool is initialized
Adding 8387580k swap on /dev/sda1. Priority:-1 extents:1 across:8387580k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[323]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
kvm: disabled by bios
type=1400 audit(1409519325.830:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=386 comm="apparmor_parser"
type=1400 audit(1409519325.830:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=386 comm="apparmor_parser"
type=1400 audit(1409519325.830:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
type=1400 audit(1409519325.830:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=386 comm="apparmor_parser"
type=1400 audit(1409519325.830:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
type=1400 audit(1409519325.830:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4035e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4035e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
init: failsafe main process (630) killed by TERM signal
type=1400 audit(1409519327.250:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=721 comm="apparmor_parser"
type=1400 audit(1409519327.250:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=721 comm="apparmor_parser"
type=1400 audit(1409519327.250:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=721 comm="apparmor_parser"
type=1400 audit(1409519327.306:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=772 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: cups main process (732) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1060) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 96 callbacks suppressed
type=1400 audit(1409519357.381:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1896 comm="apparmor_parser"
type=1400 audit(1409519357.381:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1896 comm="apparmor_parser"
type=1400 audit(1409519357.381:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1896 comm="apparmor_parser"