dmesg - sk22
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-26-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #45~precise1-Ubuntu SMP Tue Jul 15 04:02:35 UTC 2014 (Ubuntu 3.11.0-26.45~precise1-generic 3.11.10.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf698fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf699000-0x00000000cf6aefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf6af000-0x00000000cf6cdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf6ce000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. PowerEdge R610/0DFXXD, BIOS 1.1.4 05/08/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 4 base 0120000000 mask FFF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf699 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE
[ 0.000000] BRK [0x01fdb000, 0x01fdbfff] PGTABLE
[ 0.000000] BRK [0x01fdc000, 0x01fdcfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcf698fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcf5fffff] page 2M
[ 0.000000] [mem 0xcf600000-0xcf698fff] page 4k
[ 0.000000] RAMDISK: [mem 0x353ee000-0x369eefff]
[ 0.000000] ACPI: RSDP 00000000000f1630 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1734 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf6af000 0320F (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6c6000 00040
[ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DMAR 00000000cf6c3668 001A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf6b2390 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf6b2600 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf6b2210 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf6b2240 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6c7000 02104 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x100000000-0x12fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xcf698fff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1046072
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13211 pages used for memmap
[ 0.000000] DMA32 zone: 845465 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf699000-0xcf6aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf6af000-0xcf6cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf6ce000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012b200000 s86720 r8192 d23872 u131072
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029702
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4009824K/4184288K available (7520K kernel code, 1081K rwdata, 4076K rodata, 1392K init, 1428K bss, 174464K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:1480 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2261.102 MHz processor
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.20 BogoMIPS (lpj=9044408)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.000048] Security Framework initialized
[ 0.000081] AppArmor: AppArmor initialized
[ 0.000084] Yama: becoming mindful.
[ 0.000415] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001338] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001730] Mount-cache hash table entries: 256
[ 0.001949] Initializing cgroup subsys memory
[ 0.001961] Initializing cgroup subsys devices
[ 0.001965] Initializing cgroup subsys freezer
[ 0.001968] Initializing cgroup subsys blkio
[ 0.001971] Initializing cgroup subsys perf_event
[ 0.001976] Initializing cgroup subsys hugetlb
[ 0.001999] CPU: Physical Processor ID: 1
[ 0.002002] CPU: Processor Core ID: 0
[ 0.002009] mce: CPU supports 9 MCE banks
[ 0.002020] CPU0: Thermal monitoring enabled (TM1)
[ 0.002032] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002032] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002032] tlb_flushall_shift: 6
[ 0.002150] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
[ 0.004428] ACPI: Core revision 20130517
[ 0.005937] ACPI: All ACPI Tables successfully acquired
[ 0.006019] ftrace: allocating 31320 entries in 123 pages
[ 0.022449] dmar: Host address width 40
[ 0.022453] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.022461] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.022466] dmar: RMRR base: 0x000000cf7c8000 end: 0x000000cf7dffff
[ 0.022469] dmar: RMRR base: 0x000000cf7b1000 end: 0x000000cf7bffff
[ 0.022472] dmar: RMRR base: 0x000000cf7a1000 end: 0x000000cf7a1fff
[ 0.022475] dmar: RMRR base: 0x000000cf7a3000 end: 0x000000cf7a3fff
[ 0.022477] dmar: RMRR base: 0x000000cf7a5000 end: 0x000000cf7a5fff
[ 0.022480] dmar: RMRR base: 0x000000cf7a7000 end: 0x000000cf7a7fff
[ 0.022483] dmar: RMRR base: 0x000000cf7c0000 end: 0x000000cf7c0fff
[ 0.022486] dmar: RMRR base: 0x000000cf7c2000 end: 0x000000cf7c2fff
[ 0.022489] dmar: ATSR flags: 0x0
[ 0.022593] This system BIOS has enabled interrupt remapping
[ 0.022593] on a chipset that contains an erratum making that
[ 0.022593] feature unstable. To maintain system stability
[ 0.022593] interrupt remapping is being disabled. Please
[ 0.022593] contact your BIOS vendor for an update
[ 0.022669] Switched APIC routing to physical flat.
[ 0.023205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062901] smpboot: CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (fam: 06, model: 1a, stepping: 05)
[ 0.170125] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.170134] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.170137] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.170141] ... version: 3
[ 0.170143] ... bit width: 48
[ 0.170145] ... generic registers: 4
[ 0.170148] ... value mask: 0000ffffffffffff
[ 0.170150] ... max period: 000000007fffffff
[ 0.170153] ... fixed-purpose events: 3
[ 0.170155] ... event mask: 000000070000000f
[ 0.185773] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.172441] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
[ 0.265280] Brought up 8 CPUs
[ 0.265289] smpboot: Total of 8 processors activated (36177.63 BogoMIPS)
[ 0.272044] devtmpfs: initialized
[ 0.273194] EVM: security.selinux
[ 0.273198] EVM: security.SMACK64
[ 0.273200] EVM: security.capability
[ 0.274343] regulator-dummy: no parameters
[ 0.274375] RTC time: 17:17:49, date: 08/27/14
[ 0.274430] NET: Registered protocol family 16
[ 0.274560] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.274566] ACPI: bus type PCI registered
[ 0.274569] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.274631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.274637] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.286512] PCI: Using configuration type 1 for base access
[ 0.287822] bio: create slab at 0
[ 0.288037] ACPI: Added _OSI(Module Device)
[ 0.288041] ACPI: Added _OSI(Processor Device)
[ 0.288044] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.288047] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.288560] ACPI: EC: Look up EC in DSDT
[ 0.289337] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.289393] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 0.289402] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8801296b0870), AE_NOT_FOUND (20130517/psparse-536)
[ 0.290483] ACPI: Interpreter enabled
[ 0.290489] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.290496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.290502] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[ 0.290514] ACPI: (supports S0 S4 S5)
[ 0.290517] ACPI: Using IOAPIC for interrupt routing
[ 0.290616] HEST: Table parsing has been initialized.
[ 0.290622] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290677] ACPI: No dock devices found.
[ 0.295029] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.295235] acpi PNP0A08:00: Requesting ACPI _OSC control (0x15)
[ 0.295439] acpi PNP0A08:00: ACPI _OSC control (0x15) granted
[ 0.295657] PCI host bridge to bus 0000:00
[ 0.295662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.295666] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.295670] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.295673] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.295677] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfdffffff]
[ 0.295681] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.295695] pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
[ 0.295748] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.295812] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.295866] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.295932] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.295985] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.296050] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.296104] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.296169] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[ 0.296223] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.296289] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.296391] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.296493] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.296601] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.296643] pci 0000:00:1a.0: reg 0x20: [io 0xec40-0xec5f]
[ 0.296729] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.296771] pci 0000:00:1a.1: reg 0x20: [io 0xec60-0xec7f]
[ 0.296867] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.296888] pci 0000:00:1a.7: reg 0x10: [mem 0xdf0ff800-0xdf0ffbff]
[ 0.296976] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.297039] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.297105] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.297177] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.297218] pci 0000:00:1d.0: reg 0x20: [io 0xec80-0xec9f]
[ 0.297305] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.297346] pci 0000:00:1d.1: reg 0x20: [io 0xeca0-0xecbf]
[ 0.297442] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.297463] pci 0000:00:1d.7: reg 0x10: [mem 0xdf0ffc00-0xdf0fffff]
[ 0.297551] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.297616] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.297717] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.297793] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.297802] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.297808] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.297814] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.297819] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 0.297905] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[ 0.297920] pci 0000:00:1f.2: reg 0x10: [io 0xec10-0xec17]
[ 0.297928] pci 0000:00:1f.2: reg 0x14: [io 0xec08-0xec0b]
[ 0.297936] pci 0000:00:1f.2: reg 0x18: [io 0xec18-0xec1f]
[ 0.297944] pci 0000:00:1f.2: reg 0x1c: [io 0xec0c-0xec0f]
[ 0.297951] pci 0000:00:1f.2: reg 0x20: [io 0xec20-0xec2f]
[ 0.297959] pci 0000:00:1f.2: reg 0x24: [io 0xec30-0xec3f]
[ 0.298109] pci 0000:01:00.0: [14e4:1639] type 00 class 0x020000
[ 0.298126] pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit]
[ 0.298211] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.298268] pci 0000:01:00.1: [14e4:1639] type 00 class 0x020000
[ 0.298284] pci 0000:01:00.1: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
[ 0.298366] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.306156] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.306166] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
[ 0.306244] pci 0000:02:00.0: [14e4:1639] type 00 class 0x020000
[ 0.306260] pci 0000:02:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
[ 0.306342] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.306398] pci 0000:02:00.1: [14e4:1639] type 00 class 0x020000
[ 0.306413] pci 0000:02:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
[ 0.306495] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.314160] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.314170] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.314229] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.314282] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.314353] pci 0000:03:00.0: [1000:0058] type 00 class 0x010000
[ 0.314368] pci 0000:03:00.0: reg 0x10: [io 0xfc00-0xfcff]
[ 0.314384] pci 0000:03:00.0: reg 0x14: [mem 0xdf2ec000-0xdf2effff 64bit]
[ 0.314400] pci 0000:03:00.0: reg 0x1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
[ 0.314419] pci 0000:03:00.0: reg 0x30: [mem 0xdf100000-0xdf1fffff pref]
[ 0.314473] pci 0000:03:00.0: supports D1 D2
[ 0.322166] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.322174] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
[ 0.322179] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.322239] pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
[ 0.322256] pci 0000:06:03.0: reg 0x10: [mem 0xd5800000-0xd5ffffff pref]
[ 0.322266] pci 0000:06:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
[ 0.322275] pci 0000:06:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
[ 0.322307] pci 0000:06:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.322392] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.322400] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.322406] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.322408] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.322410] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.322412] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.322414] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfdffffff] (subtractive decode)
[ 0.322416] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.322437] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.323228] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 0.323305] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.323380] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.323455] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.323530] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.323605] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 0.323680] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.323756] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 0.323828] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.323838] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.323857] Found 1 acpi root devices
[ 0.323945] vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.323950] vgaarb: loaded
[ 0.323952] vgaarb: bridge control possible 0000:06:03.0
[ 0.324120] SCSI subsystem initialized
[ 0.324124] ACPI: bus type ATA registered
[ 0.324169] libata version 3.00 loaded.
[ 0.324185] ACPI: bus type USB registered
[ 0.324204] usbcore: registered new interface driver usbfs
[ 0.324213] usbcore: registered new interface driver hub
[ 0.324234] usbcore: registered new device driver usb
[ 0.324350] PCI: Using ACPI for IRQ routing
[ 0.330276] PCI: Discovered peer bus fe
[ 0.330279] PCI: root bus fe: using default resources
[ 0.330280] PCI: Probing PCI hardware (bus fe)
[ 0.330304] PCI host bridge to bus 0000:fe
[ 0.330308] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
[ 0.330312] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[ 0.330316] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[ 0.330324] pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
[ 0.330364] pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
[ 0.330406] pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
[ 0.330443] pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
[ 0.330481] pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
[ 0.330518] pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
[ 0.330556] pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
[ 0.330593] pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
[ 0.330630] pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
[ 0.330670] pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.330710] pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
[ 0.330749] pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
[ 0.330785] pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
[ 0.330820] pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
[ 0.330859] pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
[ 0.330895] pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
[ 0.330932] pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.330968] pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.331008] pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
[ 0.331044] pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
[ 0.331081] pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
[ 0.331118] pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
[ 0.331168] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
[ 0.331197] PCI: pci_cache_line_size set to 64 bytes
[ 0.331265] e820: reserve RAM buffer [mem 0xcf699000-0xcfffffff]
[ 0.331351] NetLabel: Initializing
[ 0.331355] NetLabel: domain hash size = 128
[ 0.331357] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.331368] NetLabel: unlabeled traffic allowed by default
[ 0.331411] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.331418] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.331424] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.333684] Switched to clocksource hpet
[ 0.338636] AppArmor: AppArmor Filesystem Enabled
[ 0.338662] pnp: PnP ACPI init
[ 0.338678] ACPI: bus type PNP registered
[ 0.338739] pnp 00:00: [dma 4]
[ 0.338762] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.338807] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.338857] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.338902] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.339139] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.339367] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.340088] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.340094] system 00:06: [io 0x0880-0x08ff] could not be reserved
[ 0.340098] system 00:06: [io 0x0900-0x091f] has been reserved
[ 0.340102] system 00:06: [io 0x0920-0x0923] has been reserved
[ 0.340105] system 00:06: [io 0x0924] has been reserved
[ 0.340109] system 00:06: [io 0x0c00-0x0c7f] has been reserved
[ 0.340113] system 00:06: [io 0x0ca0-0x0ca7] has been reserved
[ 0.340116] system 00:06: [io 0x0ca9-0x0cab] has been reserved
[ 0.340120] system 00:06: [io 0x0cad-0x0caf] has been reserved
[ 0.340125] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.340169] pnp 00:07: [irq 0 disabled]
[ 0.340202] system 00:07: [io 0x0ca8] has been reserved
[ 0.340207] system 00:07: [io 0x0cac] has been reserved
[ 0.340212] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
[ 0.340249] pnp 00:08: [irq 0 disabled]
[ 0.340286] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.340530] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.340536] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340598] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.340642] system 00:0b: [mem 0xfed90000-0xfed91fff] could not be reserved
[ 0.340648] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340811] pnp: PnP ACPI: found 12 devices
[ 0.340815] ACPI: bus type PNP unregistered
[ 0.347109] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.347116] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.347122] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
[ 0.347130] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.347136] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
[ 0.347143] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.347153] pci 0000:00:09.0: PCI bridge to [bus 05]
[ 0.347162] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.347167] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
[ 0.347173] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf2fffff]
[ 0.347184] pci 0000:06:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
[ 0.347188] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.347194] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.347199] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.348395] pci 0000:00:1e.0: setting latency timer to 64
[ 0.348400] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.348402] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.348404] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.348406] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
[ 0.348408] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.348410] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
[ 0.348412] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
[ 0.348414] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.348416] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf2fffff]
[ 0.348418] pci_bus 0000:06: resource 1 [mem 0xde000000-0xdeffffff]
[ 0.348420] pci_bus 0000:06: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
[ 0.348422] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.348424] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.348426] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.348428] pci_bus 0000:06: resource 7 [mem 0xd0000000-0xfdffffff]
[ 0.348430] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.348432] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
[ 0.348434] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
[ 0.348471] NET: Registered protocol family 2
[ 0.348656] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.348787] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.348874] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.348898] TCP: reno registered
[ 0.348908] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.348928] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.349024] NET: Registered protocol family 1
[ 0.367405] pci 0000:06:03.0: Boot video device
[ 0.367433] PCI: CLS 64 bytes, default 64
[ 0.367472] Trying to unpack rootfs image as initramfs...
[ 0.784655] Freeing initrd memory: 22532K (ffff8800353ee000 - ffff8800369ef000)
[ 0.784674] dmar: Device scope device [0000:00:1a.02] not found
[ 0.784678] dmar: Device scope device [0000:00:1d.02] not found
[ 0.784683] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.784687] software IO TLB [mem 0xcb699000-0xcf699000] (64MB) mapped at [ffff8800cb699000-ffff8800cf698fff]
[ 0.784993] Scanning for low memory corruption every 60 seconds
[ 0.785525] Initialise module verification
[ 0.785576] audit: initializing netlink socket (disabled)
[ 0.785591] type=2000 audit(1409159869.668:1): initialized
[ 0.814684] bounce pool size: 64 pages
[ 0.814701] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.815889] zbud: loaded
[ 0.816024] VFS: Disk quotas dquot_6.5.2
[ 0.816081] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.816625] fuse init (API version 7.22)
[ 0.816702] msgmni has been set to 7875
[ 0.817112] Key type asymmetric registered
[ 0.817116] Asymmetric key parser 'x509' registered
[ 0.817150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.817202] io scheduler noop registered
[ 0.817206] io scheduler deadline registered (default)
[ 0.817233] io scheduler cfq registered
[ 0.817366] pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
[ 0.817429] pcieport 0000:00:03.0: irq 73 for MSI/MSI-X
[ 0.817489] pcieport 0000:00:07.0: irq 74 for MSI/MSI-X
[ 0.817548] pcieport 0000:00:09.0: irq 75 for MSI/MSI-X
[ 0.817608] pcieport 0000:00:1c.0: irq 76 for MSI/MSI-X
[ 0.817686] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.817691] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.817695] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.817700] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.817714] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.817718] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.817722] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.817727] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.817741] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 0.817746] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 0.817760] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 0.817766] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 0.817780] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.817784] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.817798] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.817812] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.817827] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.817890] intel_idle: MWAIT substates: 0x1120
[ 0.817901] intel_idle: v0.4 model 0x1A
[ 0.817903] intel_idle: lapic_timer_reliable_states 0x2
[ 0.818021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.818028] ACPI: Power Button [PWRF]
[ 0.818082] ACPI: Requesting acpi_cpufreq
[ 0.818406] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 0.818412] pstore: Registered erst as persistent store backend
[ 0.818539] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 0.839033] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.859450] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.860686] Linux agpgart interface v0.103
[ 0.862132] brd: module loaded
[ 0.862871] loop: module loaded
[ 0.862935] megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013
[ 0.862995] ata_piix 0000:00:1f.2: version 2.13
[ 0.863262] ata_piix 0000:00:1f.2: MAP [
[ 0.863265] P0 -- P1 -- ]
[ 1.017860] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.018038] scsi0 : ata_piix
[ 1.018098] scsi1 : ata_piix
[ 1.018130] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
[ 1.018135] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
[ 1.018382] libphy: Fixed MDIO Bus: probed
[ 1.018463] tun: Universal TUN/TAP device driver, 1.6
[ 1.018466] tun: (C) 1999-2004 Max Krasnyansky
[ 1.018511] PPP generic driver version 2.4.2
[ 1.018548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.018552] ehci-pci: EHCI PCI platform driver
[ 1.018815] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 1.018826] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.018834] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.018849] ehci-pci 0000:00:1a.7: debug port 1
[ 1.022738] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.022751] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 1.033851] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.033882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.033886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.033890] usb usb1: Product: EHCI Host Controller
[ 1.033894] usb usb1: Manufacturer: Linux 3.11.0-26-generic ehci_hcd
[ 1.033897] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.033991] hub 1-0:1.0: USB hub found
[ 1.033997] hub 1-0:1.0: 4 ports detected
[ 1.034331] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.034342] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.034349] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.034363] ehci-pci 0000:00:1d.7: debug port 1
[ 1.038273] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.038288] ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 1.049855] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.049879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.049884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.049888] usb usb2: Product: EHCI Host Controller
[ 1.049891] usb usb2: Manufacturer: Linux 3.11.0-26-generic ehci_hcd
[ 1.049894] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.049975] hub 2-0:1.0: USB hub found
[ 1.049980] hub 2-0:1.0: 4 ports detected
[ 1.050065] ehci-platform: EHCI generic platform driver
[ 1.050074] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.050077] ohci-pci: OHCI PCI platform driver
[ 1.050089] ohci-platform: OHCI generic platform driver
[ 1.050096] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.050351] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.050354] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.050361] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.050397] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[ 1.050425] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050429] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050433] usb usb3: Product: UHCI Host Controller
[ 1.050437] usb usb3: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.050440] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.050519] hub 3-0:1.0: USB hub found
[ 1.050525] hub 3-0:1.0: 2 ports detected
[ 1.050835] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.050838] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.050845] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.050878] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 1.050905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050913] usb usb4: Product: UHCI Host Controller
[ 1.050916] usb usb4: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.050920] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.050996] hub 4-0:1.0: USB hub found
[ 1.051001] hub 4-0:1.0: 2 ports detected
[ 1.051309] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.051312] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.051319] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.051344] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[ 1.051372] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.051376] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.051381] usb usb5: Product: UHCI Host Controller
[ 1.051384] usb usb5: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.051387] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.051468] hub 5-0:1.0: USB hub found
[ 1.051473] hub 5-0:1.0: 2 ports detected
[ 1.051778] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.051781] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.051788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.051823] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 1.051850] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.051854] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.051858] usb usb6: Product: UHCI Host Controller
[ 1.051861] usb usb6: Manufacturer: Linux 3.11.0-26-generic uhci_hcd
[ 1.051865] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.051941] hub 6-0:1.0: USB hub found
[ 1.051946] hub 6-0:1.0: 2 ports detected
[ 1.052061] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.054952] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.054959] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.055056] mousedev: PS/2 mouse device common for all mice
[ 1.055142] rtc_cmos 00:03: RTC can wake from S4
[ 1.055252] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.055279] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.055340] device-mapper: uevent: version 1.0.3
[ 1.055398] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 1.055577] cpuidle: using governor ladder
[ 1.055764] cpuidle: using governor menu
[ 1.055787] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.055871] TCP: cubic registered
[ 1.055974] NET: Registered protocol family 10
[ 1.056203] NET: Registered protocol family 17
[ 1.056215] Key type dns_resolver registered
[ 1.056485] PM: Hibernation image not present or could not be loaded.
[ 1.056489] Loading module verification certificates
[ 1.057474] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 05f79677c64ce29c19b2aaf989bed111ed47632f'
[ 1.057485] registered taskstats version 1
[ 1.059143] Key type trusted registered
[ 1.060738] Key type encrypted registered
[ 1.063589] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.064075] regulator-dummy: disabling
[ 1.064408] Magic number: 10:564:290
[ 1.064442] tty tty23: hash matches
[ 1.064679] rtc_cmos 00:03: setting system clock to 2014-08-27 17:17:50 UTC (1409159870)
[ 1.066844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.066848] EDD information not available.
[ 1.346076] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.478462] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 1.478471] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.478869] hub 1-3:1.0: USB hub found
[ 1.479087] hub 1-3:1.0: 3 ports detected
[ 1.494105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.502286] ata1.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD51, max UDMA/100
[ 1.518245] ata1.00: configured for UDMA/100
[ 1.526871] scsi 0:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD51 PQ: 0 ANSI: 5
[ 1.533548] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 1.533557] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.533811] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.534003] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.782077] tsc: Refined TSC clocksource calibration: 2260.999 MHz
[ 1.938277] usb 1-3.2: new high-speed USB device number 3 using ehci-pci
[ 2.039054] usb 1-3.2: New USB device found, idVendor=05ac, idProduct=1006
[ 2.039062] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.039069] usb 1-3.2: Product: Keyboard Hub
[ 2.039073] usb 1-3.2: Manufacturer: Apple, Inc.
[ 2.039077] usb 1-3.2: SerialNumber: 000000000000
[ 2.039465] hub 1-3.2:1.0: USB hub found
[ 2.039536] hub 1-3.2:1.0: 3 ports detected
[ 2.046170] ata2: failed to resume link (SControl 0)
[ 2.056901] ata2: SATA link down (SStatus 4 SControl 0)
[ 2.059326] Freeing unused kernel memory: 1392K (ffffffff81d10000 - ffffffff81e6c000)
[ 2.059332] Write protecting the kernel read-only data: 12288k
[ 2.061747] Freeing unused kernel memory: 660K (ffff88000175b000 - ffff880001800000)
[ 2.062246] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[ 2.082484] udevd[204]: starting version 175
[ 2.103000] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
[ 2.103925] bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:22:19:5f:9c:81
[ 2.104632] bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:22:19:5f:9c:83
[ 2.105554] bnx2 0000:02:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:22:19:5f:9c:85
[ 2.106293] bnx2 0000:02:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:22:19:5f:9c:87
[ 2.118618] Fusion MPT base driver 3.04.20
[ 2.118627] Copyright (c) 1999-2008 LSI Corporation
[ 2.122600] Fusion MPT SAS Host driver 3.04.20
[ 2.122807] mptbase: ioc0: Initiating bringup
[ 2.150206] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 2.308345] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[ 2.308354] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.308360] usb 5-2: Product: USB Composite Device-0
[ 2.308365] usb 5-2: Manufacturer: Avocent
[ 2.308369] usb 5-2: SerialNumber: 20080519
[ 2.321461] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.331337] usbcore: registered new interface driver usbhid
[ 2.331341] usbhid: USB HID core driver
[ 2.333864] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1
[ 2.333955] hid-generic 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 2.334078] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2
[ 2.334266] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 2.386420] usb 1-3.2.2: new low-speed USB device number 4 using ehci-pci
[ 2.484786] usb 1-3.2.2: New USB device found, idVendor=05ac, idProduct=0220
[ 2.484792] usb 1-3.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.484796] usb 1-3.2.2: Product: Apple Keyboard
[ 2.484798] usb 1-3.2.2: Manufacturer: Apple, Inc
[ 2.493816] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2.2/1-3.2.2:1.0/input/input3
[ 2.494038] apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:1a.7-3.2.2/input0
[ 2.494708] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2.2/1-3.2.2:1.1/input/input4
[ 2.495007] apple 0003:05AC:0220.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:1a.7-3.2.2/input1
[ 2.782626] Switched to clocksource tsc
[ 2.830343] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 23.134507] scsi2 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
[ 23.169989] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c5003bd65ccd
[ 23.170914] scsi 2:0:0:0: Direct-Access SEAGATE ST9300605SS 0002 PQ: 0 ANSI: 6
[ 23.172787] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 23.173105] sd 2:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
[ 23.175128] sd 2:0:0:0: [sda] Write Protect is off
[ 23.175137] sd 2:0:0:0: [sda] Mode Sense: d7 00 10 08
[ 23.175715] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 23.179382] sda: sda1 sda2 < sda5 >
[ 23.182376] sd 2:0:0:0: [sda] Attached SCSI disk
[ 24.372633] vesafb: module verification failed: signature and/or required key missing - tainting kernel
[ 24.373032] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 24.373038] vesafb: scrolling: redraw
[ 24.373043] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 24.377621] vesafb: framebuffer at 0xd5800000, mapped to 0xffffc90010880000, using 1216k, total 1216k
[ 24.377860] Console: switching to colour frame buffer device 80x30
[ 24.390328] fb0: VESA VGA frame buffer device
[ 24.492765] xor: measuring software checksum speed
[ 24.531178] prefetch64-sse: 10323.000 MB/sec
[ 24.571187] generic_sse: 9097.000 MB/sec
[ 24.571415] xor: using function: prefetch64-sse (10323.000 MB/sec)
[ 24.639267] raid6: sse2x1 6220 MB/s
[ 24.707282] raid6: sse2x2 7308 MB/s
[ 24.775296] raid6: sse2x4 8043 MB/s
[ 24.775500] raid6: using algorithm sse2x4 (8043 MB/s)
[ 24.775776] raid6: using ssse3x2 recovery algorithm
[ 24.790122] bio: create slab at 1
[ 24.790696] Btrfs loaded
[ 24.888996] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 25.522876] init: ureadahead main process (474) terminated with status 5
[ 25.973186] Adding 4183036k swap on /dev/sda5. Priority:-1 extents:1 across:4183036k FS
[ 26.275926] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.275932] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.275936] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 26.275940] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 26.383391] udevd[596]: starting version 175
[ 26.883670] lp: driver loaded but no devices found
[ 27.050807] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 27.073526] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 27.078840] EDAC MC: Ver: 3.0.0
[ 27.104516] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:fe:03.0
[ 27.104560] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
[ 27.104789] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 27.119931] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 27.154950] device-mapper: multipath: version 1.6.0 loaded
[ 27.222945] 8021q: 802.1Q VLAN Support v1.8
[ 27.661655] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 27.833993] type=1400 audit(1409159897.261:2): apparmor="STATUS" operation="profile_load" parent=997 profile="unconfined" name="/sbin/dhclient" pid=1011 comm="apparmor_parser"
[ 27.834001] type=1400 audit(1409159897.261:3): apparmor="STATUS" operation="profile_load" parent=997 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
[ 27.834006] type=1400 audit(1409159897.261:4): apparmor="STATUS" operation="profile_load" parent=997 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
[ 27.834022] type=1400 audit(1409159897.261:5): apparmor="STATUS" operation="profile_replace" parent=996 profile="unconfined" name="/sbin/dhclient" pid=1010 comm="apparmor_parser"
[ 27.834030] type=1400 audit(1409159897.261:6): apparmor="STATUS" operation="profile_replace" parent=996 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1010 comm="apparmor_parser"
[ 27.834035] type=1400 audit(1409159897.261:7): apparmor="STATUS" operation="profile_replace" parent=996 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1010 comm="apparmor_parser"
[ 27.834107] type=1400 audit(1409159897.261:8): apparmor="STATUS" operation="profile_replace" parent=993 profile="unconfined" name="/sbin/dhclient" pid=1009 comm="apparmor_parser"
[ 27.834114] type=1400 audit(1409159897.261:9): apparmor="STATUS" operation="profile_replace" parent=993 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1009 comm="apparmor_parser"
[ 27.834119] type=1400 audit(1409159897.261:10): apparmor="STATUS" operation="profile_replace" parent=993 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1009 comm="apparmor_parser"
[ 27.834506] type=1400 audit(1409159897.261:11): apparmor="STATUS" operation="profile_replace" parent=997 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
[ 28.665352] bnx2 0000:01:00.0: irq 77 for MSI/MSI-X
[ 28.665365] bnx2 0000:01:00.0: irq 78 for MSI/MSI-X
[ 28.665374] bnx2 0000:01:00.0: irq 79 for MSI/MSI-X
[ 28.665383] bnx2 0000:01:00.0: irq 80 for MSI/MSI-X
[ 28.665392] bnx2 0000:01:00.0: irq 81 for MSI/MSI-X
[ 28.665401] bnx2 0000:01:00.0: irq 82 for MSI/MSI-X
[ 28.665409] bnx2 0000:01:00.0: irq 83 for MSI/MSI-X
[ 28.665418] bnx2 0000:01:00.0: irq 84 for MSI/MSI-X
[ 28.665427] bnx2 0000:01:00.0: irq 85 for MSI/MSI-X
[ 28.733326] bnx2 0000:01:00.0 eth0: using MSIX
[ 28.733400] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.878759] Loading iSCSI transport class v2.0-870.
[ 28.929382] iscsi: registered transport (tcp)
[ 29.167052] iscsi: registered transport (iser)
[ 29.189010] iscsid (1249): /proc/1249/oom_adj is deprecated, please use /proc/1249/oom_score_adj instead.
[ 29.351470] init: failsafe main process (1109) killed by TERM signal
[ 30.349917] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[ 30.349919] , receive & transmit flow control ON
[ 30.350104] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.667838] nbd: registered device at major 43
[ 31.504402] init: wait-for-state (nova-computelibvirt-bin) main process (1571) killed by TERM signal
[ 35.013278] Ebtables v2.0 registered
[ 35.136052] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.160418] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 39.571531] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 42.708083] Bridge firewalling registered
[ 42.842427] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 69.953458] device vlan100 entered promiscuous mode
[ 69.953462] device eth0 entered promiscuous mode
[ 69.953531] br100: port 1(vlan100) entered forwarding state
[ 69.953535] br100: port 1(vlan100) entered forwarding state
[ 70.296094] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 70.296100] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 72.535118] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 72.535123] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 74.110072] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 74.110076] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 74.470373] device vlan201 entered promiscuous mode
[ 74.470446] br201: port 1(vlan201) entered forwarding state
[ 74.470451] br201: port 1(vlan201) entered forwarding state
[ 74.788352] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 74.788357] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 74.788359] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 74.788360] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 77.005206] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 77.005210] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 77.005211] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 77.005213] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.158482] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.158486] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.158488] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.158489] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.291507] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.291511] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.291513] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 78.291515] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 80.611045] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 80.611049] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 80.611051] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 80.611052] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 82.912687] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 82.912692] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 82.912694] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 82.912695] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 85.226745] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 85.226749] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 85.226751] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 85.226756] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 87.525454] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 87.525458] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 87.525460] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 87.525462] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 6727.190171] perf samples too long (2835 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[37080.835811] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37080.835817] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37080.835820] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37080.835822] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.023875] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.023881] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.023884] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.023887] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.139459] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.139465] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.139468] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.139471] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37081.744568] audit_printk_skb: 105 callbacks suppressed
[37081.744572] type=1400 audit(1409196943.349:47): apparmor="STATUS" operation="profile_load" parent=21090 profile="unconfined" name="libvirt-33d9da4d-0c3f-444e-b82b-0cc7375dbc9b" pid=21091 comm="apparmor_parser"
[37081.816638] device vnet0 entered promiscuous mode
[37081.840777] br100: port 2(vnet0) entered forwarding state
[37081.840792] br100: port 2(vnet0) entered forwarding state
[37082.181310] cgroup: libvirtd (1653) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[37082.181315] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[37171.030646] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37171.030650] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37171.030652] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37171.030654] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[37171.572243] type=1400 audit(1409197033.159:48): apparmor="STATUS" operation="profile_load" parent=21386 profile="unconfined" name="libvirt-43627ba2-29a5-4d04-97bb-0f87e7c43fc2" pid=21387 comm="apparmor_parser"
[37171.667244] device vnet1 entered promiscuous mode
[37171.691364] br201: port 2(vnet1) entered forwarding state
[37171.691380] br201: port 2(vnet1) entered forwarding state
[83566.120505] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[83566.121297] br100: port 1(vlan100) entered disabled state
[83566.121442] br201: port 1(vlan201) entered disabled state
[87507.570446] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[87507.570455] , receive & transmit flow control ON
[87507.570636] br100: port 1(vlan100) entered forwarding state
[87507.570642] br100: port 1(vlan100) entered forwarding state
[87507.570676] br201: port 1(vlan201) entered forwarding state
[87507.570682] br201: port 1(vlan201) entered forwarding state
[87509.233516] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[87509.234332] br100: port 1(vlan100) entered disabled state
[87509.234467] br201: port 1(vlan201) entered disabled state
[87510.821720] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[87510.821729] , receive & transmit flow control ON
[87510.821907] br100: port 1(vlan100) entered forwarding state
[87510.821914] br100: port 1(vlan100) entered forwarding state
[87510.821947] br201: port 1(vlan201) entered forwarding state
[87510.821952] br201: port 1(vlan201) entered forwarding state
[87556.775382] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[87556.776215] br100: port 1(vlan100) entered disabled state
[87556.776377] br201: port 1(vlan201) entered disabled state
[87569.428148] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[87569.428157] , receive & transmit flow control ON
[87569.428346] br100: port 1(vlan100) entered forwarding state
[87569.428353] br100: port 1(vlan100) entered forwarding state
[87569.428387] br201: port 1(vlan201) entered forwarding state
[87569.428392] br201: port 1(vlan201) entered forwarding state
[87959.364476] ------------[ cut here ]------------
[87959.364494] WARNING: CPU: 0 PID: 0 at /build/buildd/linux-lts-saucy-3.11.0/net/sched/sch_generic.c:260 dev_watchdog+0x262/0x270()
[87959.364497] NETDEV WATCHDOG: eth0 (bnx2): transmit queue 0 timed out
[87959.364499] Modules linked in: xt_state ebt_redirect ebt_ip xt_physdev ebt_arp ebtable_filter xt_nat ipt_MASQUERADE xt_conntrack ipt_REJECT xt_CHECKSUM bridge xt_tcpudp iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nbd ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_crypt 8021q mrp garp stp llc dm_multipath kvm_intel i7core_edac scsi_dh kvm psmouse edac_core gpio_ich dcdbas joydev serio_raw lpc_ich mac_hid lp parport btrfs raid6_pq xor zlib_deflate vesafb(F) hid_apple hid_generic usbhid hid mptsas mptscsih mptbase scsi_transport_sas bnx2
[87959.364569] CPU: 0 PID: 0 Comm: swapper/0 Tainted: GF I 3.11.0-26-generic #45~precise1-Ubuntu
[87959.364571] Hardware name: Dell Inc. PowerEdge R610/0DFXXD, BIOS 1.1.4 05/08/2009
[87959.364574] 0000000000000104 ffff88012b203ce0 ffffffff8173f07b 0000000000004f2b
[87959.364578] ffff88012b203d30 ffff88012b203d20 ffffffff8106541c ffff88012b20e960
[87959.364582] ffff880123ba8000 0000000000000000 0000000000000008 0000000000000000
[87959.364586] Call Trace:
[87959.364588] [] dump_stack+0x46/0x58
[87959.364600] [] warn_slowpath_common+0x8c/0xc0
[87959.364604] [] warn_slowpath_fmt+0x46/0x50
[87959.364608] [] ? lapic_next_event+0x1d/0x30
[87959.364615] [] dev_watchdog+0x262/0x270
[87959.364631] [] ? __queue_work+0x3d0/0x3d0
[87959.364641] [] ? pfifo_fast_dequeue+0xe0/0xe0
[87959.364646] [] call_timer_fn+0x46/0x160
[87959.364651] [] run_timer_softirq+0x267/0x2c0
[87959.364656] [] ? add_interrupt_randomness+0x41/0x190
[87959.364660] [] ? pfifo_fast_dequeue+0xe0/0xe0
[87959.364665] [] __do_softirq+0xe0/0x280
[87959.364671] [] ? _raw_spin_lock+0xe/0x20
[87959.364675] [] call_softirq+0x1c/0x30
[87959.364681] [] do_softirq+0x65/0xa0
[87959.364685] [] irq_exit+0x9e/0xc0
[87959.364688] [] do_IRQ+0x63/0xe0
[87959.364692] [] common_interrupt+0x6d/0x6d
[87959.364700] [] ? cpuidle_enter_state+0x5e/0xe0
[87959.364715] [] ? cpuidle_enter_state+0x57/0xe0
[87959.364719] [] cpuidle_idle_call+0xc0/0x220
[87959.364724] [] arch_cpu_idle+0xe/0x30
[87959.364729] [] cpu_idle_loop+0x98/0x260
[87959.364733] [] cpu_startup_entry+0x6b/0x70
[87959.364738] [] rest_init+0x77/0x80
[87959.364743] [] start_kernel+0x407/0x414
[87959.364746] [] ? repair_env_string+0x5a/0x5a
[87959.364757] [] ? early_idt_handlers+0x120/0x120
[87959.364764] [] x86_64_start_reservations+0x2a/0x2c
[87959.364767] [] x86_64_start_kernel+0x108/0x117
[87959.364770] ---[ end trace d5693e4eaa2ac053 ]---
[87959.364775] bnx2 0000:01:00.0 eth0:
[87959.365103] bnx2 0000:01:00.0 eth0: RV2P_PFTQ_CTL 00010000
[87959.365416] bnx2 0000:01:00.0 eth0: RV2P_TFTQ_CTL 00020000
[87959.365728] bnx2 0000:01:00.0 eth0: RV2P_MFTQ_CTL 00004000
[87959.366081] bnx2 0000:01:00.0 eth0: TBDR_FTQ_CTL 01004002
[87959.366442] bnx2 0000:01:00.0 eth0: TDMA_FTQ_CTL 04010002
[87959.366799] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 04010002
[87959.367110] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 04010002
[87959.367405] bnx2 0000:01:00.0 eth0: TPAT_FTQ_CTL 04010002
[87959.367704] bnx2 0000:01:00.0 eth0: RXP_CFTQ_CTL 00008000
[87959.368002] bnx2 0000:01:00.0 eth0: RXP_FTQ_CTL 00100000
[87959.368302] bnx2 0000:01:00.0 eth0: COM_COMXQ_FTQ_CTL 00010000
[87959.368719] bnx2 0000:01:00.0 eth0: COM_COMTQ_FTQ_CTL 00020000
[87959.369063] bnx2 0000:01:00.0 eth0: COM_COMQ_FTQ_CTL 00010000
[87959.369391] bnx2 0000:01:00.0 eth0: CP_CPQ_FTQ_CTL 00004000
[87959.369706] bnx2 0000:01:00.0 eth0: CPU states:
[87959.369969] bnx2 0000:01:00.0 eth0: 045000 mode b84c state 80001000 evt_mask 500 pc 80012cc pc 80012c4 instr 580fffe
[87959.370575] bnx2 0000:01:00.0 eth0: 085000 mode b84c state 80005000 evt_mask 500 pc 8000a4c pc 8000a4c instr 38420001
[87959.371185] bnx2 0000:01:00.0 eth0: 0c5000 mode b84c state 80001000 evt_mask 500 pc 8004c14 pc 8004c20 instr 32050003
[87959.371795] bnx2 0000:01:00.0 eth0: 105000 mode b8cc state 80000000 evt_mask 500 pc 8000a98 pc 8000a94 instr 32620007
[87959.378161] bnx2 0000:01:00.0 eth0: 145000 mode b880 state 80000000 evt_mask 500 pc 8003b14 pc 8000470 instr 34420004
[87959.390683] bnx2 0000:01:00.0 eth0: 185000 mode b8cc state 80000000 evt_mask 500 pc 8000c50 pc 8000c58 instr 1092823
[87959.403412] bnx2 0000:01:00.0 eth0:
[87959.410334] bnx2 0000:01:00.0 eth0:
[87959.417037] bnx2 0000:01:00.0 eth0: TBDC free cnt: 27
[87959.423497] bnx2 0000:01:00.0 eth0: LINE CID BIDX CMD VALIDS
[87959.430410] bnx2 0000:01:00.0 eth0: 00 000800 09a0 00 [fe]
[87959.437394] bnx2 0000:01:00.0 eth0: 01 000800 09a8 00 [ff]
[87959.444112] bnx2 0000:01:00.0 eth0: 02 000800 09b0 00 [ff]
[87959.451061] bnx2 0000:01:00.0 eth0: 03 000800 09b8 00 [ff]
[87959.457957] bnx2 0000:01:00.0 eth0: 04 000800 09c0 00 [f]
[87959.464634] bnx2 0000:01:00.0 eth0: 05 13f780 feb0 99 [0]
[87959.471407] bnx2 0000:01:00.0 eth0: 06 142f80 66f8 7f [0]
[87959.478331] bnx2 0000:01:00.0 eth0: 07 167180 be80 5b [0]
[87959.484966] bnx2 0000:01:00.0 eth0: 08 17bf80 dce8 fe [0]
[87959.491833] bnx2 0000:01:00.0 eth0: 09 0e9680 dff8 bf [0]
[87959.498711] bnx2 0000:01:00.0 eth0: 0a 07db80 f730 0f [0]
[87959.505326] bnx2 0000:01:00.0 eth0: 0b 1edb80 6da0 7f [0]
[87959.512187] bnx2 0000:01:00.0 eth0: 0c 0ff080 dd90 fb [0]
[87959.518895] bnx2 0000:01:00.0 eth0: 0d 1ff980 7fe8 77 [0]
[87959.525314] bnx2 0000:01:00.0 eth0: 0e 1bef00 dec8 7e [0]
[87959.531664] bnx2 0000:01:00.0 eth0: 0f 1f6780 f5f8 7f [0]
[87959.537774] bnx2 0000:01:00.0 eth0: 10 08df80 dfe8 ed [0]
[87959.543307] bnx2 0000:01:00.0 eth0: 11 17fd80 76e0 bd [0]
[87959.548843] bnx2 0000:01:00.0 eth0: 12 1db580 fee8 74 [0]
[87959.553820] bnx2 0000:01:00.0 eth0: 13 1afc00 fd78 16 [0]
[87959.558726] bnx2 0000:01:00.0 eth0: 14 1fbe80 31f8 7a [0]
[87959.563158] bnx2 0000:01:00.0 eth0: 15 1ebb80 b4e8 7f [0]
[87959.567500] bnx2 0000:01:00.0 eth0: 16 1bd080 f5b8 75 [0]
[87959.571324] bnx2 0000:01:00.0 eth0: 17 17f900 9f58 05 [0]
[87959.574891] bnx2 0000:01:00.0 eth0: 18 1bef80 d578 88 [0]
[87959.578415] bnx2 0000:01:00.0 eth0: 19 1b3f00 feb8 fe [0]
[87959.581499] bnx2 0000:01:00.0 eth0: 1a 0baf80 5770 ae [0]
[87959.584433] bnx2 0000:01:00.0 eth0: 1b 1f7f00 dd50 ff [0]
[87959.587651] bnx2 0000:01:00.0 eth0: 1c 1f9e00 cff8 e9 [0]
[87959.590501] bnx2 0000:01:00.0 eth0: 1d 1f1e80 c7b8 b8 [0]
[87959.593302] bnx2 0000:01:00.0 eth0: 1e 0cee80 3e68 fa [0]
[87959.596078] bnx2 0000:01:00.0 eth0: 1f 1d1f00 b768 ff [0]
[87959.599070] bnx2 0000:01:00.0 eth0:
[87959.602024] bnx2 0000:01:00.0 eth0: DEBUG: intr_sem[0] PCI_CMD[00100406]
[87959.605148] bnx2 0000:01:00.0 eth0: DEBUG: PCI_PM[19002008] PCI_MISC_CFG[92000088]
[87959.611811] bnx2 0000:01:00.0 eth0: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003]
[87959.619516] bnx2 0000:01:00.0 eth0: DEBUG: RPM_MGMT_PKT_CTRL[40000088]
[87959.623893] bnx2 0000:01:00.0 eth0: DEBUG: HC_STATS_INTERRUPT_STATUS[01ff0000]
[87959.633013] bnx2 0000:01:00.0 eth0: DEBUG: PBA[00000000]
[87959.638036] bnx2 0000:01:00.0 eth0:
[87959.643188] bnx2 0000:01:00.0 eth0: DEBUG: MCP_STATE_P0[0003610e] MCP_STATE_P1[0003600e]
[87959.653824] bnx2 0000:01:00.0 eth0: DEBUG: MCP mode[0000b880] state[80008000] evt_mask[00000500]
[87959.665771] bnx2 0000:01:00.0 eth0: DEBUG: pc[08003c68] pc[08000448] instr[3c02001c]
[87959.678913] bnx2 0000:01:00.0 eth0: DEBUG: shmem states:
[87959.685737] bnx2 0000:01:00.0 eth0: DEBUG: drv_mb[01030003] fw_mb[00000003] link_status[0000006b]
[87959.700309] drv_pulse_mb[00005768]
[87959.700316] bnx2 0000:01:00.0 eth0: DEBUG: dev_info_signature[44564903] reset_type[01005254]
[87959.715927] condition[0003610e]
[87959.715935] bnx2 0000:01:00.0 eth0: DEBUG: 000001c0: 01005254 42530088 0003610e 00000000
[87959.732801] bnx2 0000:01:00.0 eth0: DEBUG: 000003cc: 44444444 44444444 44444444 00000a28
[87959.750823] bnx2 0000:01:00.0 eth0: DEBUG: 000003dc: 0004ffff 00000000 00000000 00000000
[87959.770033] bnx2 0000:01:00.0 eth0: DEBUG: 000003ec: 00000000 00000000 00000000 00000000
[87959.790377] bnx2 0000:01:00.0 eth0: DEBUG: 0x3fc[0000ffff]
[87959.800884] bnx2 0000:01:00.0 eth0:
[87959.873733] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[87959.884661] br100: port 1(vlan100) entered disabled state
[87959.884905] br201: port 1(vlan201) entered disabled state
[87961.490268] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[87961.490272] , receive & transmit flow control ON
[87961.490428] br100: port 1(vlan100) entered forwarding state
[87961.490432] br100: port 1(vlan100) entered forwarding state
[87961.490463] br201: port 1(vlan201) entered forwarding state
[87961.490466] br201: port 1(vlan201) entered forwarding state
[88001.373167] bnx2 0000:01:00.0 eth0:
[88001.383087] bnx2 0000:01:00.0 eth0: RV2P_PFTQ_CTL 00010000
[88001.392773] bnx2 0000:01:00.0 eth0: RV2P_TFTQ_CTL 00020000
[88001.402282] bnx2 0000:01:00.0 eth0: RV2P_MFTQ_CTL 00004000
[88001.411566] bnx2 0000:01:00.0 eth0: TBDR_FTQ_CTL 00004000
[88001.420644] bnx2 0000:01:00.0 eth0: TDMA_FTQ_CTL 00010000
[88001.429370] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 00010000
[88001.438179] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 00010000
[88001.446695] bnx2 0000:01:00.0 eth0: TPAT_FTQ_CTL 04010002
[88001.454881] bnx2 0000:01:00.0 eth0: RXP_CFTQ_CTL 00008000
[88001.462770] bnx2 0000:01:00.0 eth0: RXP_FTQ_CTL 00100000
[88001.470467] bnx2 0000:01:00.0 eth0: COM_COMXQ_FTQ_CTL 00010000
[88001.477880] bnx2 0000:01:00.0 eth0: COM_COMTQ_FTQ_CTL 00020000
[88001.484871] bnx2 0000:01:00.0 eth0: COM_COMQ_FTQ_CTL 00010000
[88001.491804] bnx2 0000:01:00.0 eth0: CP_CPQ_FTQ_CTL 00004000
[88001.498781] bnx2 0000:01:00.0 eth0: CPU states:
[88001.505228] bnx2 0000:01:00.0 eth0: 045000 mode b84c state 80001000 evt_mask 500 pc 8001288 pc 8001288 instr 30820001
[88001.518026] bnx2 0000:01:00.0 eth0: 085000 mode b84c state 80005000 evt_mask 500 pc 8000a4c pc 8000a4c instr 38420001
[88001.530653] bnx2 0000:01:00.0 eth0: 0c5000 mode b84c state 80000000 evt_mask 500 pc 8004c14 pc 8004c20 instr 32050003
[88001.543304] bnx2 0000:01:00.0 eth0: 105000 mode b8cc state 80000000 evt_mask 500 pc 8000b2c pc 8000b24 instr 10620021
[88001.556140] bnx2 0000:01:00.0 eth0: 145000 mode b880 state 80000000 evt_mask 500 pc 8003b0c pc 8000470 instr 34420004
[88001.568747] bnx2 0000:01:00.0 eth0: 185000 mode b8cc state 80004000 evt_mask 500 pc 8000ca8 pc 8000c7c instr 3bf90001
[88001.581603] bnx2 0000:01:00.0 eth0:
[88001.588332] bnx2 0000:01:00.0 eth0:
[88001.594877] bnx2 0000:01:00.0 eth0: TBDC free cnt: 32
[88001.601576] bnx2 0000:01:00.0 eth0: LINE CID BIDX CMD VALIDS
[88001.608511] bnx2 0000:01:00.0 eth0: 00 000800 0020 00 [0]
[88001.615338] bnx2 0000:01:00.0 eth0: 01 000800 0020 00 [0]
[88001.622223] bnx2 0000:01:00.0 eth0: 02 000800 09b0 00 [0]
[88001.629046] bnx2 0000:01:00.0 eth0: 03 000800 09b8 00 [0]
[88001.635923] bnx2 0000:01:00.0 eth0: 04 000800 09c0 00 [0]
[88001.642562] bnx2 0000:01:00.0 eth0: 05 13f780 feb0 99 [0]
[88001.649404] bnx2 0000:01:00.0 eth0: 06 142f80 66f8 7f [0]
[88001.656324] bnx2 0000:01:00.0 eth0: 07 167180 be80 5b [0]
[88001.662935] bnx2 0000:01:00.0 eth0: 08 17bf80 dce8 fe [0]
[88001.669647] bnx2 0000:01:00.0 eth0: 09 0e9680 dff8 bf [0]
[88001.676461] bnx2 0000:01:00.0 eth0: 0a 07db80 f730 0f [0]
[88001.682982] bnx2 0000:01:00.0 eth0: 0b 1edb80 6da0 7f [0]
[88001.689730] bnx2 0000:01:00.0 eth0: 0c 0ff080 dd90 fb [0]
[88001.696496] bnx2 0000:01:00.0 eth0: 0d 1ff980 7fe8 77 [0]
[88001.702852] bnx2 0000:01:00.0 eth0: 0e 1bef00 dec8 7e [0]
[88001.709135] bnx2 0000:01:00.0 eth0: 0f 1f6780 f5f8 7f [0]
[88001.714984] bnx2 0000:01:00.0 eth0: 10 08df80 dfe8 ed [0]
[88001.721009] bnx2 0000:01:00.0 eth0: 11 17fd80 76e0 bd [0]
[88001.726561] bnx2 0000:01:00.0 eth0: 12 1db580 fee8 74 [0]
[88001.731862] bnx2 0000:01:00.0 eth0: 13 1afc00 fd78 16 [0]
[88001.736883] bnx2 0000:01:00.0 eth0: 14 1fbe80 31f8 7a [0]
[88001.741757] bnx2 0000:01:00.0 eth0: 15 1ebb80 b4e8 7f [0]
[88001.746245] bnx2 0000:01:00.0 eth0: 16 1bd080 f5b8 75 [0]
[88001.750187] bnx2 0000:01:00.0 eth0: 17 17f900 9f58 05 [0]
[88001.753668] bnx2 0000:01:00.0 eth0: 18 1bef80 d578 88 [0]
[88001.757147] bnx2 0000:01:00.0 eth0: 19 1b3f00 feb8 fe [0]
[88001.760118] bnx2 0000:01:00.0 eth0: 1a 0baf80 5770 ae [0]
[88001.763131] bnx2 0000:01:00.0 eth0: 1b 1f7f00 dd50 ff [0]
[88001.766228] bnx2 0000:01:00.0 eth0: 1c 1f9e00 cff8 e9 [0]
[88001.769013] bnx2 0000:01:00.0 eth0: 1d 1f1e80 c7b8 b8 [0]
[88001.771719] bnx2 0000:01:00.0 eth0: 1e 0cee80 3e68 fa [0]
[88001.774539] bnx2 0000:01:00.0 eth0: 1f 1d1f00 b768 ff [0]
[88001.777477] bnx2 0000:01:00.0 eth0:
[88001.780305] bnx2 0000:01:00.0 eth0: DEBUG: intr_sem[0] PCI_CMD[00100406]
[88001.783364] bnx2 0000:01:00.0 eth0: DEBUG: PCI_PM[19002008] PCI_MISC_CFG[92000088]
[88001.789971] bnx2 0000:01:00.0 eth0: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003]
[88001.797747] bnx2 0000:01:00.0 eth0: DEBUG: RPM_MGMT_PKT_CTRL[40000088]
[88001.802130] bnx2 0000:01:00.0 eth0: DEBUG: HC_STATS_INTERRUPT_STATUS[01ff0000]
[88001.811116] bnx2 0000:01:00.0 eth0: DEBUG: PBA[00000000]
[88001.816263] bnx2 0000:01:00.0 eth0:
[88001.821348] bnx2 0000:01:00.0 eth0: DEBUG: MCP_STATE_P0[0003610e] MCP_STATE_P1[0003600e]
[88001.831930] bnx2 0000:01:00.0 eth0: DEBUG: MCP mode[0000b880] state[80000000] evt_mask[00000500]
[88001.843736] bnx2 0000:01:00.0 eth0: DEBUG: pc[0800048c] pc[08000c84] instr[00041040]
[88001.856920] bnx2 0000:01:00.0 eth0: DEBUG: shmem states:
[88001.863657] bnx2 0000:01:00.0 eth0: DEBUG: drv_mb[01030006] fw_mb[00000006] link_status[0000006b]
[88001.878069] drv_pulse_mb[00005792]
[88001.878076] bnx2 0000:01:00.0 eth0: DEBUG: dev_info_signature[44564903] reset_type[01005254]
[88001.893481] condition[0003610e]
[88001.893489] bnx2 0000:01:00.0 eth0: DEBUG: 000001c0: 01005254 42530088 0003610e 00000000
[88001.910437] bnx2 0000:01:00.0 eth0: DEBUG: 000003cc: 44444444 44444444 44444444 00000a28
[88001.928436] bnx2 0000:01:00.0 eth0: DEBUG: 000003dc: 0004ffff 00000000 00000000 00000000
[88001.947626] bnx2 0000:01:00.0 eth0: DEBUG: 000003ec: 00000000 00000000 00000000 00000000
[88001.967919] bnx2 0000:01:00.0 eth0: DEBUG: 0x3fc[0000ffff]
[88001.978362] bnx2 0000:01:00.0 eth0:
[88002.050470] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[88002.061224] br100: port 1(vlan100) entered disabled state
[88002.061484] br201: port 1(vlan201) entered disabled state
[88003.646034] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[88003.646043] , receive & transmit flow control ON
[88003.646216] br100: port 1(vlan100) entered forwarding state
[88003.646222] br100: port 1(vlan100) entered forwarding state
[88003.646254] br201: port 1(vlan201) entered forwarding state
[88003.646258] br201: port 1(vlan201) entered forwarding state
[88049.383129] bnx2 0000:01:00.0 eth0:
[88049.393101] bnx2 0000:01:00.0 eth0: RV2P_PFTQ_CTL 00010000
[88049.402774] bnx2 0000:01:00.0 eth0: RV2P_TFTQ_CTL 00020000
[88049.412242] bnx2 0000:01:00.0 eth0: RV2P_MFTQ_CTL 00004000
[88049.421437] bnx2 0000:01:00.0 eth0: TBDR_FTQ_CTL 00004000
[88049.430556] bnx2 0000:01:00.0 eth0: TDMA_FTQ_CTL 00010000
[88049.439272] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 00010000
[88049.448173] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 00010000
[88049.456744] bnx2 0000:01:00.0 eth0: TPAT_FTQ_CTL 04010002
[88049.464775] bnx2 0000:01:00.0 eth0: RXP_CFTQ_CTL 00008000
[88049.473335] bnx2 0000:01:00.0 eth0: RXP_FTQ_CTL 00100000
[88049.481213] bnx2 0000:01:00.0 eth0: COM_COMXQ_FTQ_CTL 00010000
[88049.488609] bnx2 0000:01:00.0 eth0: COM_COMTQ_FTQ_CTL 00020000
[88049.495725] bnx2 0000:01:00.0 eth0: COM_COMQ_FTQ_CTL 00010000
[88049.502507] bnx2 0000:01:00.0 eth0: CP_CPQ_FTQ_CTL 00004000
[88049.509435] bnx2 0000:01:00.0 eth0: CPU states:
[88049.515984] bnx2 0000:01:00.0 eth0: 045000 mode b84c state 80001000 evt_mask 500 pc 8001290 pc 8001290 instr 3c0b800a
[88049.528803] bnx2 0000:01:00.0 eth0: 085000 mode b84c state 80005000 evt_mask 500 pc 8000a4c pc 8000a4c instr 38420001
[88049.541407] bnx2 0000:01:00.0 eth0: 0c5000 mode b84c state 80001000 evt_mask 500 pc 8004c14 pc 8004c18 instr 10e00088
[88049.554395] bnx2 0000:01:00.0 eth0: 105000 mode b8cc state 80000000 evt_mask 500 pc 8000a94 pc 8000a98 instr 8821
[88049.567312] bnx2 0000:01:00.0 eth0: 145000 mode b880 state 80000000 evt_mask 500 pc 8009458 pc 800ce30 instr 8fb10014
[88049.579982] bnx2 0000:01:00.0 eth0: 185000 mode b8cc state 80008000 evt_mask 500 pc 8000918 pc 8000920 instr 10a30010
[88049.592985] bnx2 0000:01:00.0 eth0:
[88049.599763] bnx2 0000:01:00.0 eth0:
[88049.606655] bnx2 0000:01:00.0 eth0: TBDC free cnt: 32
[88049.613189] bnx2 0000:01:00.0 eth0: LINE CID BIDX CMD VALIDS
[88049.620164] bnx2 0000:01:00.0 eth0: 00 000800 0028 00 [0]
[88049.627275] bnx2 0000:01:00.0 eth0: 01 000800 0028 00 [0]
[88049.634095] bnx2 0000:01:00.0 eth0: 02 000800 09b0 00 [0]
[88049.640981] bnx2 0000:01:00.0 eth0: 03 000800 09b8 00 [0]
[88049.647960] bnx2 0000:01:00.0 eth0: 04 000800 09c0 00 [0]
[88049.654602] bnx2 0000:01:00.0 eth0: 05 13f780 feb0 99 [0]
[88049.661539] bnx2 0000:01:00.0 eth0: 06 142f80 66f8 7f [0]
[88049.668503] bnx2 0000:01:00.0 eth0: 07 167180 be80 5b [0]
[88049.675320] bnx2 0000:01:00.0 eth0: 08 17bf80 dce8 fe [0]
[88049.675545] CE: hpet increased min_delta_ns to 20115 nsec
[88049.681992] bnx2 0000:01:00.0 eth0: 09 0e9680 dff8 bf [0]
[88049.688925] bnx2 0000:01:00.0 eth0: 0a 07db80 f730 0f [0]
[88049.695728] bnx2 0000:01:00.0 eth0: 0b 1edb80 6da0 7f [0]
[88049.702342] bnx2 0000:01:00.0 eth0: 0c 0ff080 dd90 fb [0]
[88049.709118] bnx2 0000:01:00.0 eth0: 0d 1ff980 7fe8 77 [0]
[88049.715684] bnx2 0000:01:00.0 eth0: 0e 1bef00 dec8 7e [0]
[88049.721917] bnx2 0000:01:00.0 eth0: 0f 1f6780 f5f8 7f [0]
[88049.728078] bnx2 0000:01:00.0 eth0: 10 08df80 dfe8 ed [0]
[88049.733625] bnx2 0000:01:00.0 eth0: 11 17fd80 76e0 bd [0]
[88049.739141] bnx2 0000:01:00.0 eth0: 12 1db580 fee8 74 [0]
[88049.744131] bnx2 0000:01:00.0 eth0: 13 1afc00 fd78 16 [0]
[88049.749079] bnx2 0000:01:00.0 eth0: 14 1fbe80 31f8 7a [0]
[88049.753551] bnx2 0000:01:00.0 eth0: 15 1ebb80 b4e8 7f [0]
[88049.757853] bnx2 0000:01:00.0 eth0: 16 1bd080 f5b8 75 [0]
[88049.761666] bnx2 0000:01:00.0 eth0: 17 17f900 9f58 05 [0]
[88049.765332] bnx2 0000:01:00.0 eth0: 18 1bef80 d578 88 [0]
[88049.768707] bnx2 0000:01:00.0 eth0: 19 1b3f00 feb8 fe [0]
[88049.771715] bnx2 0000:01:00.0 eth0: 1a 0baf80 5770 ae [0]
[88049.774651] bnx2 0000:01:00.0 eth0: 1b 1f7f00 dd50 ff [0]
[88049.777871] bnx2 0000:01:00.0 eth0: 1c 1f9e00 cff8 e9 [0]
[88049.780702] bnx2 0000:01:00.0 eth0: 1d 1f1e80 c7b8 b8 [0]
[88049.783467] bnx2 0000:01:00.0 eth0: 1e 0cee80 3e68 fa [0]
[88049.786398] bnx2 0000:01:00.0 eth0: 1f 1d1f00 b768 ff [0]
[88049.789269] bnx2 0000:01:00.0 eth0:
[88049.792146] bnx2 0000:01:00.0 eth0: DEBUG: intr_sem[0] PCI_CMD[00100406]
[88049.795340] bnx2 0000:01:00.0 eth0: DEBUG: PCI_PM[19002008] PCI_MISC_CFG[92000088]
[88049.801830] bnx2 0000:01:00.0 eth0: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003]
[88049.809581] bnx2 0000:01:00.0 eth0: DEBUG: RPM_MGMT_PKT_CTRL[40000088]
[88049.813938] bnx2 0000:01:00.0 eth0: DEBUG: HC_STATS_INTERRUPT_STATUS[01ff0000]
[88049.823004] bnx2 0000:01:00.0 eth0: DEBUG: PBA[00000000]
[88049.828208] bnx2 0000:01:00.0 eth0:
[88049.833346] bnx2 0000:01:00.0 eth0: DEBUG: MCP_STATE_P0[0003610e] MCP_STATE_P1[0003600e]
[88049.843971] bnx2 0000:01:00.0 eth0: DEBUG: MCP mode[0000b880] state[80000000] evt_mask[00000500]
[88049.856083] bnx2 0000:01:00.0 eth0: DEBUG: pc[08000368] pc[08000244] instr[30630001]
[88049.869082] bnx2 0000:01:00.0 eth0: DEBUG: shmem states:
[88049.876067] bnx2 0000:01:00.0 eth0: DEBUG: drv_mb[01030009] fw_mb[00000009] link_status[0000006b]
[88049.890317] drv_pulse_mb[000057c2]
[88049.890325] bnx2 0000:01:00.0 eth0: DEBUG: dev_info_signature[44564903] reset_type[01005254]
[88049.905932] condition[0003610e]
[88049.905942] bnx2 0000:01:00.0 eth0: DEBUG: 000001c0: 01005254 42530085 0003610e 00000000
[88049.922575] bnx2 0000:01:00.0 eth0: DEBUG: 000003cc: 44444444 44444444 44444444 00000a28
[88049.940502] bnx2 0000:01:00.0 eth0: DEBUG: 000003dc: 0004ffff 00000000 00000000 00000000
[88049.959602] bnx2 0000:01:00.0 eth0: DEBUG: 000003ec: 00000000 00000000 00000000 00000000
[88049.980444] bnx2 0000:01:00.0 eth0: DEBUG: 0x3fc[0000ffff]
[88049.990883] bnx2 0000:01:00.0 eth0:
[88050.064330] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[88050.075120] br100: port 1(vlan100) entered disabled state
[88050.075245] br201: port 1(vlan201) entered disabled state
[88051.680938] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[88051.680947] , receive & transmit flow control ON
[88051.681153] br100: port 1(vlan100) entered forwarding state
[88051.681164] br100: port 1(vlan100) entered forwarding state
[88051.681200] br201: port 1(vlan201) entered forwarding state
[88051.681205] br201: port 1(vlan201) entered forwarding state
[88097.393061] bnx2 0000:01:00.0 eth0:
[88097.403033] bnx2 0000:01:00.0 eth0: RV2P_PFTQ_CTL 00010000
[88097.412729] bnx2 0000:01:00.0 eth0: RV2P_TFTQ_CTL 00020000
[88097.422207] bnx2 0000:01:00.0 eth0: RV2P_MFTQ_CTL 00004000
[88097.431450] bnx2 0000:01:00.0 eth0: TBDR_FTQ_CTL 00004000
[88097.440507] bnx2 0000:01:00.0 eth0: TDMA_FTQ_CTL 00010000
[88097.449223] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 00010000
[88097.458014] bnx2 0000:01:00.0 eth0: TXP_FTQ_CTL 00010000
[88097.466525] bnx2 0000:01:00.0 eth0: TPAT_FTQ_CTL 04010002
[88097.474591] bnx2 0000:01:00.0 eth0: RXP_CFTQ_CTL 00008000
[88097.482509] bnx2 0000:01:00.0 eth0: RXP_FTQ_CTL 00100000
[88097.490273] bnx2 0000:01:00.0 eth0: COM_COMXQ_FTQ_CTL 00010000
[88097.497679] bnx2 0000:01:00.0 eth0: COM_COMTQ_FTQ_CTL 00020000
[88097.504653] bnx2 0000:01:00.0 eth0: COM_COMQ_FTQ_CTL 00010000
[88097.511562] bnx2 0000:01:00.0 eth0: CP_CPQ_FTQ_CTL 00004000
[88097.518504] bnx2 0000:01:00.0 eth0: CPU states:
[88097.524860] bnx2 0000:01:00.0 eth0: 045000 mode b84c state 80001000 evt_mask 500 pc 8001284 pc 8001288 instr 38640001
[88097.537794] bnx2 0000:01:00.0 eth0: 085000 mode b84c state 80005000 evt_mask 500 pc 8000a4c pc 8000a4c instr 38420001
[88097.550450] bnx2 0000:01:00.0 eth0: 0c5000 mode b84c state 80000000 evt_mask 500 pc 8004c14 pc 8004c20 instr 32050003
[88097.563216] bnx2 0000:01:00.0 eth0: 105000 mode b8cc state 80008000 evt_mask 500 pc 8000a9c pc 8000aa4 instr 10620021
[88097.576052] bnx2 0000:01:00.0 eth0: 145000 mode b880 state 80000000 evt_mask 500 pc 800db4c pc 8003b0c instr 34420400
[88097.588647] bnx2 0000:01:00.0 eth0: 185000 mode b8cc state 80000000 evt_mask 500 pc 8000c50 pc 800097c instr 8f890014
[88097.601576] bnx2 0000:01:00.0 eth0:
[88097.608319] bnx2 0000:01:00.0 eth0:
[88097.614868] bnx2 0000:01:00.0 eth0: TBDC free cnt: 32
[88097.621611] bnx2 0000:01:00.0 eth0: LINE CID BIDX CMD VALIDS
[88097.628544] bnx2 0000:01:00.0 eth0: 00 000800 0028 00 [0]
[88097.635345] bnx2 0000:01:00.0 eth0: 01 000800 0028 00 [0]
[88097.642260] bnx2 0000:01:00.0 eth0: 02 000800 09b0 00 [0]
[88097.649162] bnx2 0000:01:00.0 eth0: 03 000800 09b8 00 [0]
[88097.656014] bnx2 0000:01:00.0 eth0: 04 000800 09c0 00 [0]
[88097.662668] bnx2 0000:01:00.0 eth0: 05 13f780 feb0 99 [0]
[88097.669533] bnx2 0000:01:00.0 eth0: 06 142f80 66f8 7f [0]
[88097.676459] bnx2 0000:01:00.0 eth0: 07 167180 be80 5b [0]
[88097.683089] bnx2 0000:01:00.0 eth0: 08 17bf80 dce8 fe [0]
[88097.689888] bnx2 0000:01:00.0 eth0: 09 0e9680 dff8 bf [0]
[88097.696721] bnx2 0000:01:00.0 eth0: 0a 07db80 f730 0f [0]
[88097.703248] bnx2 0000:01:00.0 eth0: 0b 1edb80 6da0 7f [0]
[88097.710003] bnx2 0000:01:00.0 eth0: 0c 0ff080 dd90 fb [0]
[88097.716751] bnx2 0000:01:00.0 eth0: 0d 1ff980 7fe8 77 [0]
[88097.723138] bnx2 0000:01:00.0 eth0: 0e 1bef00 dec8 7e [0]
[88097.729426] bnx2 0000:01:00.0 eth0: 0f 1f6780 f5f8 7f [0]
[88097.735216] bnx2 0000:01:00.0 eth0: 10 08df80 dfe8 ed [0]
[88097.740842] bnx2 0000:01:00.0 eth0: 11 17fd80 76e0 bd [0]
[88097.746281] bnx2 0000:01:00.0 eth0: 12 1db580 fee8 74 [0]
[88097.751145] bnx2 0000:01:00.0 eth0: 13 1afc00 fd78 16 [0]
[88097.755926] bnx2 0000:01:00.0 eth0: 14 1fbe80 31f8 7a [0]
[88097.760863] bnx2 0000:01:00.0 eth0: 15 1ebb80 b4e8 7f [0]
[88097.765038] bnx2 0000:01:00.0 eth0: 16 1bd080 f5b8 75 [0]
[88097.768990] bnx2 0000:01:00.0 eth0: 17 17f900 9f58 05 [0]
[88097.772536] bnx2 0000:01:00.0 eth0: 18 1bef80 d578 88 [0]
[88097.775917] bnx2 0000:01:00.0 eth0: 19 1b3f00 feb8 fe [0]
[88097.778959] bnx2 0000:01:00.0 eth0: 1a 0baf80 5770 ae [0]
[88097.781874] bnx2 0000:01:00.0 eth0: 1b 1f7f00 dd50 ff [0]
[88097.784819] bnx2 0000:01:00.0 eth0: 1c 1f9e00 cff8 e9 [0]
[88097.787813] bnx2 0000:01:00.0 eth0: 1d 1f1e80 c7b8 b8 [0]
[88097.790509] bnx2 0000:01:00.0 eth0: 1e 0cee80 3e68 fa [0]
[88097.793248] bnx2 0000:01:00.0 eth0: 1f 1d1f00 b768 ff [0]
[88097.796266] bnx2 0000:01:00.0 eth0:
[88097.799067] bnx2 0000:01:00.0 eth0: DEBUG: intr_sem[0] PCI_CMD[00100406]
[88097.802108] bnx2 0000:01:00.0 eth0: DEBUG: PCI_PM[19002008] PCI_MISC_CFG[92000088]
[88097.808658] bnx2 0000:01:00.0 eth0: DEBUG: EMAC_TX_STATUS[00000008] EMAC_RX_STATUS[00000003]
[88097.816338] bnx2 0000:01:00.0 eth0: DEBUG: RPM_MGMT_PKT_CTRL[40000088]
[88097.820698] bnx2 0000:01:00.0 eth0: DEBUG: HC_STATS_INTERRUPT_STATUS[01ff0000]
[88097.829691] bnx2 0000:01:00.0 eth0: DEBUG: PBA[00000000]
[88097.834580] bnx2 0000:01:00.0 eth0:
[88097.839842] bnx2 0000:01:00.0 eth0: DEBUG: MCP_STATE_P0[0003610e] MCP_STATE_P1[0003600e]
[88097.850491] bnx2 0000:01:00.0 eth0: DEBUG: MCP mode[0000b880] state[80000000] evt_mask[00000500]
[88097.862335] bnx2 0000:01:00.0 eth0: DEBUG: pc[08000460] pc[080003f0] instr[3c1c0800]
[88097.875424] bnx2 0000:01:00.0 eth0: DEBUG: shmem states:
[88097.882312] bnx2 0000:01:00.0 eth0: DEBUG: drv_mb[0103000c] fw_mb[0000000c] link_status[0000006b]
[88097.896792] drv_pulse_mb[000057f2]
[88097.896798] bnx2 0000:01:00.0 eth0: DEBUG: dev_info_signature[44564903] reset_type[01005254]
[88097.912270] condition[0003610e]
[88097.912280] bnx2 0000:01:00.0 eth0: DEBUG: 000001c0: 01005254 42530088 0003610e 00000000
[88097.929179] bnx2 0000:01:00.0 eth0: DEBUG: 000003cc: 44444444 44444444 44444444 00000a28
[88097.947131] bnx2 0000:01:00.0 eth0: DEBUG: 000003dc: 0004ffff 00000000 00000000 00000000
[88097.966324] bnx2 0000:01:00.0 eth0: DEBUG: 000003ec: 00000000 00000000 00000000 00000000
[88097.986703] bnx2 0000:01:00.0 eth0: DEBUG: 0x3fc[0000ffff]
[88097.997180] bnx2 0000:01:00.0 eth0:
[88098.070217] bnx2 0000:01:00.0 eth0: NIC Copper Link is Down
[88098.080902] br100: port 1(vlan100) entered disabled state
[88098.081045] br201: port 1(vlan201) entered disabled state
[88099.686815] bnx2 0000:01:00.0 eth0: NIC Copper Link is Up, 100 Mbps full duplex
[88099.686824] , receive & transmit flow control ON
[88099.686998] br100: port 1(vlan100) entered forwarding state
[88099.687004] br100: port 1(vlan100) entered forwarding state
[88099.687038] br201: port 1(vlan201) entered forwarding state
[88099.687042] br201: port 1(vlan201) entered forwarding state
[142435.964577] perf samples too long (5203 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[171363.458241] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.458247] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.458250] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.458253] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.875364] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.875370] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.875373] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171363.875376] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.004302] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.004306] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.004308] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.004310] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.108852] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.108856] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.108858] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[171365.108860] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234796.012590] br100: port 2(vnet0) entered disabled state
[234796.012734] device vnet0 left promiscuous mode
[234796.012738] br100: port 2(vnet0) entered disabled state
[234797.913710] type=1400 audit(1409394618.349:49): apparmor="STATUS" operation="profile_remove" parent=7666 profile="unconfined" name="libvirt-33d9da4d-0c3f-444e-b82b-0cc7375dbc9b" pid=7667 comm="apparmor_parser"
[234798.179211] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234798.179216] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234798.179217] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234798.179219] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234799.601772] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234799.601778] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234799.601780] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[234799.601783] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237140.911108] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237140.911114] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237140.911117] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237140.911120] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237141.508106] type=1400 audit(1409396961.461:50): apparmor="STATUS" operation="profile_load" parent=9028 profile="unconfined" name="libvirt-8650aef5-a0ee-4ca1-ba6b-75147c0b8da0" pid=9029 comm="apparmor_parser"
[237141.603672] device vnet0 entered promiscuous mode
[237141.623762] br100: port 2(vnet0) entered forwarding state
[237141.623772] br100: port 2(vnet0) entered forwarding state
[237181.924863] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237181.924928] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237181.924930] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
[237181.924932] xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.