dmesg - XEN-HVM-PROC04
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000f0000000 (usable)
BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000010fc00000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013
Hypervisor detected: Xen HVM
Xen version 4.1.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x10fc00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000F0000000 mask FFFF8000000 uncachable
1 base 000F8000000 mask FFFFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fb730] fb730
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
init_memory_mapping: 0000000000000000-00000000f0000000
0000000000 - 00f0000000 page 2M
kernel direct mapping tables up to f0000000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000010fc00000
0100000000 - 010fc00000 page 2M
kernel direct mapping tables up to 10fc00000 @ efffe000-f0000000
RAMDISK: 36c6c000 - 3762e000
ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
ACPI: XSDT 00000000fc00ef80 00044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc00ed40 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc003040 0BC75 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: FACS 00000000fc003000 00040
ACPI: APIC 00000000fc00ee40 000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 00000000fc00ef20 00038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 00000000fc00ef58 00028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000010fc00000
Initmem setup node 0 0000000000000000-000000010fc00000
NODE_DATA [000000010fbfb000 - 000000010fbfffff]
[ffffea0000000000-ffffea0003bfffff] PMD -> [ffff88010b200000-ffff88010ebfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0010fc00
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000f0000
0: 0x00100000 -> 0x0010fc00
On node 0 totalpages: 1047438
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 964664 pages, LIFO batch:31
Normal zone: 882 pages used for memmap
Normal zone: 63630 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0x1f48
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 15 CPUs, 13 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000f0000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
Allocating PCI resources starting at f0000000 (gap: f0000000:c000000)
Booting paravirtualized kernel on Xen HVM
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88010f800000 s82944 r8192 d23552 u131072
pcpu-alloc: s82944 r8192 d23552 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032215
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4044100k/4452352k available (3431k kernel code, 262600k absent, 145652k reserved, 3308k data, 580k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:1208 16
Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Detected 2396.906 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4793.81 BogoMIPS (lpj=9587624)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 0 MCE banks
ACPI: Core revision 20110623
x2apic not enabled, IRQ remapping init failed
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Xeon(R) CPU E7- 2870 @ 2.40GHz stepping 02
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Performance Events: unsupported p6 CPU model 47 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
mce: CPU supports 0 MCE banks
NMI watchdog disabled (cpu1): hardware events not enabled
Brought up 2 CPUs
Total of 2 processors activated (9646.85 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xc220-0xc22f]
pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
pci 0000:00:01.2: reg 20: [io 0xc200-0xc21f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: [5853:0001] type 0 class 0x000100
pci 0000:00:03.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e000 - 000000000009ffff
reserve RAM buffer: 000000010fc00000 - 000000010fffffff
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0xf0000000-0xfbffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x10c0-0x1141]
pnp 00:02: [io 0xb044-0xb047]
system 00:02: [io 0x10c0-0x1141] has been reserved
system 00:02: [io 0xb044-0xb047] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0010-0x001f]
pnp 00:04: [io 0x0022-0x002d]
pnp 00:04: [io 0x0030-0x003f]
pnp 00:04: [io 0x0044-0x005f]
pnp 00:04: [io 0x0062-0x0063]
pnp 00:04: [io 0x0065-0x006f]
pnp 00:04: [io 0x0072-0x007f]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0084-0x0086]
pnp 00:04: [io 0x0088]
pnp 00:04: [io 0x008c-0x008e]
pnp 00:04: [io 0x0090-0x009f]
pnp 00:04: [io 0x00a2-0x00bd]
pnp 00:04: [io 0x00e0-0x00ef]
pnp 00:04: [io 0x08a0-0x08a3]
pnp 00:04: [io 0x0cc0-0x0ccf]
pnp 00:04: [io 0x04d0-0x04d1]
system 00:04: [io 0x08a0-0x08a3] has been reserved
system 00:04: [io 0x0cc0-0x0ccf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: [io 0x0480-0x048f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
xen: --> pirq=16 -> irq=8 (gsi=8)
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
xen: --> pirq=17 -> irq=12 (gsi=12)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
xen: --> pirq=18 -> irq=1 (gsi=1)
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [io 0x03f0-0x03f5]
pnp 00:0a: [io 0x03f7]
xen: --> pirq=19 -> irq=6 (gsi=6)
pnp 00:0a: [irq 6]
pnp 00:0a: [dma 2]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
xen: --> pirq=20 -> irq=4 (gsi=4)
pnp 00:0b: [irq 4]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x0378-0x037f]
xen: --> pirq=21 -> irq=7 (gsi=7)
pnp 00:0c: [irq 7]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=22 -> irq=23 (gsi=23)
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9992k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800ebffe000 - ffff8800efffe000
software IO TLB at phys 0xebffe000 - 0xefffe000
audit: initializing netlink socket (disabled)
type=2000 audit(1409183308.669:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7918
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [0] registered
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
intel_idle: does not run on family 6 model 47
ERST: Table is not found!
GHES: HEST is not enabled!
xen: --> pirq=23 -> irq=30 (gsi=30)
Grant table initialized
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
XENBUS: Device with no driver: device/vbd/768
XENBUS: Device with no driver: device/vbd/5696
XENBUS: Device with no driver: device/vif/0
rtc_cmos 00:06: setting system clock to 2014-08-27 23:48:29 UTC (1409183309)
Initializing network drop monitor service
Freeing unused kernel memory: 580k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 648k freed
Freeing unused kernel memory: 688k freed
udevd[50]: starting version 175
Initialising Xen virtual ethernet driver.
SCSI subsystem initialized
vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
blkfront: xvda: barrier: enabled
scsi0 : ata_piix
xvda: xvda1 xvda2 < xvda5 >
Setting capacity to 41943040
xvda: detected capacity change from 0 to 21474836480
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
usbcore: registered new device driver usb
FDC 0 is a S82078B
ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
ata2.01: configured for MWDMA2
scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg0 type 5
usb 1-2: new full-speed USB device number 2 using uhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 202:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
Refined TSC clocksource calibration: 2396.866 MHz.
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
udevd[310]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
ACPI: Sleep Button [SLPF]
input: PC Speaker as /devices/platform/pcspkr/input/input3
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Error: Driver 'pcspkr' is already registered, aborting...
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
Adding 901116k swap on /dev/xvda5. Priority:-1 extents:1 across:901116k SS
EXT4-fs (xvda1): re-mounted. Opts: (null)
EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro
loop: module loaded
eth0: no IPv6 routers present
crafty[21698]: segfault at 0 ip 00007fceb2e206e0 sp 00007fffbeee4158 error 4 in libc-2.13.so[7fceb2db5000+182000]
crafty[21701]: segfault at 0 ip 00007f08e993a6e0 sp 00007fff8f0486c8 error 4 in libc-2.13.so[7f08e98cf000+182000]
crafty[21704]: segfault at 0 ip 00007f8294eef6e0 sp 00007fff83bcc078 error 4 in libc-2.13.so[7f8294e84000+182000]