dmesg - mem
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.20.3.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Thu Jun 19 21:14:45 UTC 2014
Command line: ro root=/dev/mapper/vg_rosewill-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_rosewill/lv_swap rd_LVM_LV=vg_rosewill/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007df73000 (usable)
BIOS-e820: 000000007df73000 - 000000007e0eb000 (reserved)
BIOS-e820: 000000007e0eb000 - 000000007e2f3000 (ACPI NVS)
BIOS-e820: 000000007e2f3000 - 000000007f35a000 (reserved)
BIOS-e820: 000000007f35a000 - 000000007f800000 (ACPI NVS)
BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001e80000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF04C0
DMI: Supermicro X9DRH-iF-NV/X9DRH-iF-NV, BIOS 3.0 12/11/2013
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1e80000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FE000000000 write-back
1 base 000080000000 mask 3FFF80000000 uncachable
2 base 001E80000000 mask 3FFF80000000 uncachable
3 base 001F00000000 mask 3FFF00000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 2GB, range: 2GB, type UC
reg 2, base: 122GB, range: 2GB, type UC
reg 3, base: 124GB, range: 4GB, type UC
total RAM covered: 122880M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 32GB, type WB
reg 5, base: 64GB, range: 32GB, type WB
reg 6, base: 96GB, range: 16GB, type WB
reg 7, base: 112GB, range: 8GB, type WB
reg 8, base: 120GB, range: 2GB, type WB
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7df73 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007df73000
0000000000 - 0040000000 page 1G
0040000000 - 007de00000 page 2M
007de00000 - 007df73000 page 4k
kernel direct mapping tables up to 7df73000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000001e80000000
0100000000 - 1e80000000 page 1G
kernel direct mapping tables up to 1e80000000 @ 12000-13000
RAMDISK: 36f44000 - 37fef9c1
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000007e20b090 000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007e217448 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000007e20b1d0 0C274 (v02 ALASKA A M I 00000015 INTL 20091112)
ACPI: FACS 000000007e2ea080 00040
ACPI: APIC 000000007e217540 001B4 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000007e2176f8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000007e217740 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: SRAT 000000007e217780 00430 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 000000007e217bb0 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 000000007e217be0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: PRAD 000000007e217c18 000BE (v02 PRADID PRADTID 00000001 MSFT 04000000)
ACPI: SPMI 000000007e217cd8 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 000000007e217d18 D0CB0 (v02 INTEL CpuPm 00004000 INTL 20091112)
ACPI: SPCR 000000007e2e89c8 00050 (v01 A M I APTIO4 01072009 AMI. 00000005)
ACPI: EINJ 000000007e2e8a18 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 000000007e2e8b48 00230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 000000007e2e8d78 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 000000007e2e8e20 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 000000007e2e8e50 00170 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-1a80000000
SRAT: Node 1 PXM 1 1a80000000-1e80000000
NUMA: Allocated memnodemap from 12040 - 120c0
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001a80000000
NODE_DATA [00000000000120c0 - 00000000000460bf]
bootmap [0000000000100000 - 000000000044ffff] pages 350
(9 early reservations) ==> bootmem [0000000000 - 1a80000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0036f44000 - 0037fef9c1] RAMDISK ==> [0036f44000 - 0037fef9c1]
#4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000]
#5 [0002021000 - 0002021198] BRK ==> [0002021000 - 0002021198]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000012030] ACPI SLIT ==> [0000012000 - 0000012030]
#8 [0000012040 - 00000120c0] MEMNODEMAP ==> [0000012040 - 00000120c0]
Bootmem setup node 1 0000001a80000000-0000001e80000000
NODE_DATA [0000001a80000040 - 0000001a8003403f]
bootmap [0000001a80035000 - 0000001a800b4fff] pages 80
(9 early reservations) ==> bootmem [1a80000000 - 1e80000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002020aa4] TEXT DATA BSS
#3 [0036f44000 - 0037fef9c1] RAMDISK
#4 [000009ac00 - 0000100000] BIOS reserved
#5 [0002021000 - 0002021198] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000012030] ACPI SLIT
#8 [0000012040 - 00000120c0] MEMNODEMAP
found SMP MP-table at [ffff8800000fdac0] fdac0
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 124928MB)
[ffffea0000000000-ffffea00103fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea0010400000-ffffea003fffffff] PMD -> [ffff880038000000-ffff880067bfffff] on node 0
[ffffea0040000000-ffffea0055ffffff] PMD -> [ffff880067e00000-ffff88007ddfffff] on node 0
[ffffea0056000000-ffffea005cbfffff] PMD -> [ffff880100000000-ffff880106bfffff] on node 0
[ffffea005cc00000-ffffea006abfffff] PMD -> [ffff881a80200000-ffff881a8e1fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01e80000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x0007df73
0: 0x00100000 -> 0x01a80000
1: 0x01a80000 -> 0x01e80000
On node 0 totalpages: 27254525
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 497579 pages, LIFO batch:31
Normal zone: 365568 pages used for memmap
Normal zone: 26373120 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x2b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 24 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007df73000 - 000000007e0eb000
PM: Registered nosave memory: 000000007e0eb000 - 000000007e2f3000
PM: Registered nosave memory: 000000007e2f3000 - 000000007f35a000
PM: Registered nosave memory: 000000007f35a000 - 000000007f800000
PM: Registered nosave memory: 000000007f800000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 12 13 14 15 16 17 -- -- -- --
pcpu-alloc: [1] 06 07 08 09 10 11 18 19 20 21 22 23 -- -- -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 31011475
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_rosewill-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_rosewill/lv_swap rd_LVM_LV=vg_rosewill/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 123840384k/127926272k available (5329k kernel code, 2130956k absent, 1954932k reserved, 7010k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1416
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 503316480 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2599.951 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.90 BogoMIPS (lpj=2599951)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21785 entries in 86 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffe000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: DRHD base: 0x000000dfffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007df88000 end: 0x0000007df94fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffe000 proximity domain: 0x1
dmar: RHSA base: 0x000000dfffc000 proximity domain: 0x0
IOAPIC id 3 under DRHD base 0xfbffe000
IOAPIC id 0 under DRHD base 0xdfffc000
IOAPIC id 2 under DRHD base 0xdfffc000
HPET id 0 under DRHD base 0xdfffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
APIC routing finalized to cluster x2apic.
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2630 v2 @ 2.60GHz stepping 04
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 Ok.
Booting Node 1, Processors #6 #7 #8 #9 #10 #11 Ok.
Booting Node 0, Processors #12 #13 #14 #15 #16 #17 Ok.
Booting Node 1, Processors #18 #19 #20 #21 #22 #23 Ok.
Brought up 24 CPUs
Total of 24 processors activated (124789.60 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7e0eb000 (2129920 bytes)
PM: Registering ACPI NVS region at 7f35a000 (4874240 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load - [PRAD] OemId [PRADID] OemTableId [PRADTID]
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xdfb1c000-0xdfb1ffff 64bit]
pci 0000:00:04.1: reg 10: [mem 0xdfb18000-0xdfb1bfff 64bit]
pci 0000:00:04.2: reg 10: [mem 0xdfb14000-0xdfb17fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0xdfb10000-0xdfb13fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0xdfb0c000-0xdfb0ffff 64bit]
pci 0000:00:04.5: reg 10: [mem 0xdfb08000-0xdfb0bfff 64bit]
pci 0000:00:04.6: reg 10: [mem 0xdfb04000-0xdfb07fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0xdfb00000-0xdfb03fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xdfb28000-0xdfb28fff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xdfb27000-0xdfb2700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xdfb26000-0xdfb2600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xdfb24000-0xdfb243ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xdfb23000-0xdfb233ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x9070-0x9077]
pci 0000:00:1f.2: reg 14: [io 0x9060-0x9063]
pci 0000:00:1f.2: reg 18: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 1c: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 20: [io 0x9020-0x903f]
pci 0000:00:1f.2: reg 24: [mem 0xdfb22000-0xdfb227ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xdfb21000-0xdfb210ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x9000-0x901f]
pci 0000:00:1f.6: reg 10: [mem 0xdfb20000-0xdfb20fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xdfa20000-0xdfa3ffff]
pci 0000:05:00.0: reg 18: [io 0x8020-0x803f]
pci 0000:05:00.0: reg 1c: [mem 0xdfac4000-0xdfac7fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.0: reg 190: [mem 0xdfa80000-0xdfa83fff]
pci 0000:05:00.1: reg 10: [mem 0xdfa00000-0xdfa1ffff]
pci 0000:05:00.1: reg 18: [io 0x8000-0x801f]
pci 0000:05:00.1: reg 1c: [mem 0xdfac0000-0xdfac3fff]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:05:00.1: reg 184: [mem 0xdfa60000-0xdfa63fff]
pci 0000:05:00.1: reg 190: [mem 0xdfa40000-0xdfa43fff]
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:03.2: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xde47c000-0xde47ffff 64bit pref]
pci 0000:07:00.0: reg 18: [mem 0xde000000-0xde3fffff 64bit pref]
pci 0000:07:00.0: reg 20: [io 0x7000-0x70ff]
pci 0000:07:00.0: reg 164: [mem 0xde400000-0xde403fff 64bit pref]
pci 0000:07:00.3: reg 10: [mem 0xdf900000-0xdf900fff]
pci 0000:07:00.3: reg 20: [io 0x7100-0x711f]
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: PME# disabled
pci 0000:00:11.0: PCI bridge to [bus 07-07]
pci 0000:00:11.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:11.0: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:11.0: bridge window [mem 0xde000000-0xde4fffff 64bit pref]
pci 0000:08:03.0: reg 10: [mem 0xdd000000-0xddffffff pref]
pci 0000:08:03.0: reg 14: [mem 0xdf800000-0xdf803fff]
pci 0000:08:03.0: reg 18: [mem 0xdf000000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x14) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: on NUMA node 0 (pxm 0)
pci0000:7f: Requesting ACPI _OSC control (0x1d)
pci0000:7f: ACPI _OSC control (0x1d) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
pci_root PNP0A08:01: host bridge window [io 0xa000-0xffff]
pci_root PNP0A08:01: host bridge window [mem 0xe0000000-0xfbffffff]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0xa000-0xffff]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff]
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: PME# disabled
pci 0000:80:02.2: PME# supported from D0 D3hot D3cold
pci 0000:80:02.2: PME# disabled
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: PME# disabled
pci 0000:80:04.0: reg 10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: reg 10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: reg 10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: reg 10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: reg 10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: reg 10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: reg 10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.4: reg 10: [mem 0xfbf20000-0xfbf20fff]
pci 0000:80:01.0: PCI bridge to [bus 81-81]
pci 0000:80:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:02.0: PCI bridge to [bus 82-82]
pci 0000:80:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:02.2: PCI bridge to [bus 83-83]
pci 0000:80:02.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:02.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:02.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:80: on NUMA node 1 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.NPE7._PRT]
pci0000:80: Requesting ACPI _OSC control (0x1d)
pci0000:80: ACPI _OSC control (0x14) granted
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: on NUMA node 1 (pxm 1)
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 74 for MSI
hpet: hpet3 irq 75 for MSI
hpet: hpet4 irq 76 for MSI
hpet: hpet5 irq 77 for MSI
hpet: hpet6 irq 78 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xdfffc000-0xdfffdfff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0a00-0x0a7f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x03f8-0x03ff]
pnp 00:04: [irq 4]
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [io 0x02f8-0x02ff]
pnp 00:05: [irq 3]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 4]
pnp 00:06: [io 0x0000-0x000f]
pnp 00:06: [io 0x0081-0x0083]
pnp 00:06: [io 0x0087]
pnp 00:06: [io 0x0089-0x008b]
pnp 00:06: [io 0x008f]
pnp 00:06: [io 0x00c0-0x00df]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0061]
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [mem 0x00000400-0x000004ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x0ca2]
pnp 00:0b: [io 0x0ca3]
pnp 00:0b: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0c: [io 0x0400-0x0453]
pnp 00:0c: [io 0x0458-0x047f]
pnp 00:0c: [io 0x1180-0x119f]
pnp 00:0c: [io 0x0500-0x057f]
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfec00000-0xfecfffff]
pnp 00:0c: [mem 0xfed08000-0xfed08fff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: [io 0x0454-0x0457]
pnp 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0e: [mem 0xfed00000-0xfed003ff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:12: [mem 0xfbffe000-0xfbffffff]
pnp 00:12: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:13: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 20 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:02: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:03: [io 0x0a00-0x0a7f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [mem 0x00000400-0x000004ff] could not be reserved
system 00:0c: [io 0x0400-0x0453] has been reserved
system 00:0c: [io 0x0458-0x047f] has been reserved
system 00:0c: [io 0x1180-0x119f] has been reserved
system 00:0c: [io 0x0500-0x057f] has been reserved
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [io 0x0454-0x0457] has been reserved
system 00:12: [mem 0xfbffe000-0xfbffffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: bridge window [io disabled]
pci 0000:00:02.2: bridge window [mem disabled]
pci 0000:00:02.2: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.0: reg 190: [mem 0xdfa80000-0xdfa83fff]
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.1: reg 184: [mem 0xdfa60000-0xdfa63fff]
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.0: reg 190: [mem 0xdfa80000-0xdfa83fff]
pci 0000:05:00.1: reg 190: [mem 0xdfa40000-0xdfa43fff]
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.0: reg 190: [mem 0xdfa80000-0xdfa83fff]
pci 0000:05:00.1: reg 184: [mem 0xdfa60000-0xdfa63fff]
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.0: reg 184: [mem 0xdfaa0000-0xdfaa3fff]
pci 0000:05:00.0: BAR 7: assigned [mem 0xdfa40000-0xdfa5ffff]
pci 0000:05:00.0: BAR 7: set to [mem 0xdfa40000-0xdfa5ffff] (PCI address [0xdfa40000-0xdfa5ffff]
pci 0000:05:00.0: reg 190: [mem 0xdfa80000-0xdfa83fff]
pci 0000:05:00.0: reg 190: [mem 0xdfa80000-0xdfa83fff]
pci 0000:05:00.0: BAR 10: assigned [mem 0xdfa60000-0xdfa7ffff]
pci 0000:05:00.0: BAR 10: set to [mem 0xdfa60000-0xdfa7ffff] (PCI address [0xdfa60000-0xdfa7ffff]
pci 0000:05:00.1: reg 184: [mem 0xdfa60000-0xdfa63fff]
pci 0000:05:00.1: reg 184: [mem 0xdfa60000-0xdfa63fff]
pci 0000:05:00.1: BAR 7: assigned [mem 0xdfa80000-0xdfa9ffff]
pci 0000:05:00.1: BAR 7: set to [mem 0xdfa80000-0xdfa9ffff] (PCI address [0xdfa80000-0xdfa9ffff]
pci 0000:05:00.1: reg 190: [mem 0xdfa40000-0xdfa43fff]
pci 0000:05:00.1: reg 190: [mem 0xdfa40000-0xdfa43fff]
pci 0000:05:00.1: BAR 10: assigned [mem 0xdfaa0000-0xdfabffff]
pci 0000:05:00.1: BAR 10: set to [mem 0xdfaa0000-0xdfabffff] (PCI address [0xdfaa0000-0xdfabffff]
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:03.2: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:03.2: bridge window [mem pref disabled]
pci 0000:07:00.0: reg 164: [mem 0xde400000-0xde403fff 64bit pref]
pci 0000:07:00.0: reg 164: [mem 0xde400000-0xde403fff 64bit pref]
pci 0000:07:00.0: reg 164: [mem 0xde400000-0xde403fff 64bit pref]
pci 0000:07:00.0: BAR 7: assigned [mem 0xde400000-0xde47bfff 64bit pref]
pci 0000:07:00.0: BAR 7: set to [mem 0xde400000-0xde47bfff 64bit pref] (PCI address [0xde400000-0xde47bfff]
pci 0000:00:11.0: PCI bridge to [bus 07-07]
pci 0000:00:11.0: PCI bridge to [bus 07-07]
pci 0000:00:11.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:11.0: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:11.0: bridge window [mem 0xde000000-0xde4fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:80:01.0: PCI bridge to [bus 81-81]
pci 0000:80:01.0: PCI bridge to [bus 81-81]
pci 0000:80:01.0: bridge window [io disabled]
pci 0000:80:01.0: bridge window [mem disabled]
pci 0000:80:01.0: bridge window [mem pref disabled]
pci 0000:80:02.0: PCI bridge to [bus 82-82]
pci 0000:80:02.0: PCI bridge to [bus 82-82]
pci 0000:80:02.0: bridge window [io disabled]
pci 0000:80:02.0: bridge window [mem disabled]
pci 0000:80:02.0: bridge window [mem pref disabled]
pci 0000:80:02.2: PCI bridge to [bus 83-83]
pci 0000:80:02.2: PCI bridge to [bus 83-83]
pci 0000:80:02.2: bridge window [io disabled]
pci 0000:80:02.2: bridge window [mem disabled]
pci 0000:80:02.2: bridge window [mem pref disabled]
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: bridge window [io disabled]
pci 0000:80:03.0: bridge window [mem disabled]
pci 0000:80:03.0: bridge window [mem pref disabled]
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 47 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 47 (level, low) -> IRQ 47
pci 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 50 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:01.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 56 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.0: setting latency timer to 64
pci 0000:80:02.2: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.2: setting latency timer to 64
alloc irq_desc for 64 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:05: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:05: resource 1 [mem 0xdfa00000-0xdfafffff]
pci_bus 0000:07: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:07: resource 1 [mem 0xdf900000-0xdf9fffff]
pci_bus 0000:07: resource 2 [mem 0xde000000-0xde4fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xdf000000-0xdf8fffff]
pci_bus 0000:08: resource 2 [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:08: resource 7 [io 0x0d00-0x9fff]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:08: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:08:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17070k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1408729242.938:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 5A35DBBA2F61C535
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 79 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 80 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 81 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 82 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.2: irq 83 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 84 for MSI/MSI-X
pcieport 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 85 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:01.0: irq 85 for MSI/MSI-X
pcieport 0000:80:02.0: setting latency timer to 64
alloc irq_desc for 86 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:02.0: irq 86 for MSI/MSI-X
pcieport 0000:80:02.2: setting latency timer to 64
alloc irq_desc for 87 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:02.2: irq 87 for MSI/MSI-X
pcieport 0000:80:03.0: setting latency timer to 64
alloc irq_desc for 88 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.0: irq 88 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0b: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:0b: Found new BMC (man_id: 0x002a7c, prod_id: 0x0664, dev_id: 0x20)
ipmi_si 00:0b: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdfb24000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.20.3.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdfb23000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.20.3.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2014-08-22 17:40:44 UTC (1408729244)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 796k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ACPI: WMI: Mapper loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0-rh
isci 0000:07:00.0: driver configured for rev: 6 silicon
isci 0000:07:00.0: OEM parameter table found in OROM
isci 0000:07:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
isci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
isci 0000:07:00.0: setting latency timer to 64
isci 0000:07:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi0 : isci
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:07:00.0: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
isci 0000:07:00.0: irq 90 for MSI/MSI-X
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 2599.999 MHz.
Switching to clocksource tsc
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 91 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdfb22000 port 0xdfb22100 irq 91
ata2: SATA max UDMA/133 abar m2048@0xdfb22000 port 0xdfb22180 irq 91
ata3: SATA max UDMA/133 abar m2048@0xdfb22000 port 0xdfb22200 irq 91
ata4: SATA max UDMA/133 abar m2048@0xdfb22000 port 0xdfb22280 irq 91
ata5: SATA max UDMA/133 abar m2048@0xdfb22000 port 0xdfb22300 irq 91
ata6: SATA max UDMA/133 abar m2048@0xdfb22000 port 0xdfb22380 irq 91
usb 1-1.6: new full speed USB device number 3 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Hermon USB hidmouse Device
usb 1-1.6: Manufacturer: Winbond Electronics Corp
usb 1-1.6: configuration #1 chosen from 1 choice
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input4
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
usb 2-1.1: new low speed USB device number 3 using ehci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 01.0 PQ: 0 ANSI: 5
ata6.00: ATAPI: MATSHITADVD-ROM UJ8B0AC, 1.00, max UDMA/100, ATAPI AN
ata6.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM MATSHITA DVD-ROM UJ8B0AC 1.00 PQ: 0 ANSI: 5
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c31d
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Keyboard
usb 2-1.1: Manufacturer: Logitech
usb 2-1.1: configuration #1 chosen from 1 choice
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5
generic-usb 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input6
generic-usb 0003:046D:C31D.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.1/input1
usb 2-1.2: new low speed USB device number 4 using ehci_hcd
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c077
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
usb 2-1.2: Manufacturer: Logitech
usb 2-1.2: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
generic-usb 0003:046D:C077.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
dracut: Scanning devices sda2 for LVM logical volumes vg_rosewill/lv_swap vg_rosewill/lv_root
dracut: inactive '/dev/vg_rosewill/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_rosewill/lv_home' [849.51 GiB] inherit
dracut: inactive '/dev/vg_rosewill/lv_swap' [31.51 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_rosewill-lv_root
dracut: Loading SELinux policy
type=1404 audit(1408729246.351:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277818 rules.
SELinux: 2048 avtab hash slots, 277818 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277818 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1408729246.737:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
alloc irq_desc for 42 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42
igb 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 93 for MSI/MSI-X
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 94 for MSI/MSI-X
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 95 for MSI/MSI-X
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 96 for MSI/MSI-X
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 97 for MSI/MSI-X
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 98 for MSI/MSI-X
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 99 for MSI/MSI-X
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 100 for MSI/MSI-X
igb 0000:05:00.0: irq 92 for MSI/MSI-X
igb 0000:05:00.0: irq 93 for MSI/MSI-X
igb 0000:05:00.0: irq 94 for MSI/MSI-X
igb 0000:05:00.0: irq 95 for MSI/MSI-X
igb 0000:05:00.0: irq 96 for MSI/MSI-X
igb 0000:05:00.0: irq 97 for MSI/MSI-X
igb 0000:05:00.0: irq 98 for MSI/MSI-X
igb 0000:05:00.0: irq 99 for MSI/MSI-X
igb 0000:05:00.0: irq 100 for MSI/MSI-X
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:e8:6f:1c
igb 0000:05:00.0: eth0: PBA No: 104900-000
igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 45 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
igb 0000:05:00.1: setting latency timer to 64
alloc irq_desc for 101 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 101 for MSI/MSI-X
alloc irq_desc for 102 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 102 for MSI/MSI-X
alloc irq_desc for 103 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 103 for MSI/MSI-X
alloc irq_desc for 104 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 104 for MSI/MSI-X
alloc irq_desc for 105 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 105 for MSI/MSI-X
alloc irq_desc for 106 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 106 for MSI/MSI-X
alloc irq_desc for 107 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 109 for MSI/MSI-X
igb 0000:05:00.1: irq 101 for MSI/MSI-X
igb 0000:05:00.1: irq 102 for MSI/MSI-X
igb 0000:05:00.1: irq 103 for MSI/MSI-X
igb 0000:05:00.1: irq 104 for MSI/MSI-X
igb 0000:05:00.1: irq 105 for MSI/MSI-X
igb 0000:05:00.1: irq 106 for MSI/MSI-X
igb 0000:05:00.1: irq 107 for MSI/MSI-X
igb 0000:05:00.1: irq 108 for MSI/MSI-X
igb 0000:05:00.1: irq 109 for MSI/MSI-X
igb 0000:05:00.1: added PHC on eth1
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:e8:6f:1d
igb 0000:05:00.1: eth1: PBA No: 104900-000
igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:07:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:07:00.3: Enabling SMBus device
ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region PMIO [io 0x400-0x47f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io 0x0500-0x053f] conflicts with ACPI region GINV [io 0x52c-0x52c]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 6:0:0:0: Attached scsi generic sg1 type 5
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
udev: renamed network interface eth1 to eth5
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU6 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU7 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU8 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU9 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU10 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU11 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU12 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU13 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU14 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU15 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU16 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU17 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU18 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU19 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU20 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU21 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU22 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
microcode: CPU23 sig=0x306e4, pf=0x1, revision=0x416
platform microcode: firmware: requesting intel-ucode/06-3e-04
Microcode Update Driver: v2.00 , Peter Oruba
udev: renamed network interface eth0 to eth4
microcode: CPU0 updated to revision 0x428, date = 2014-05-29
microcode: CPU1 updated to revision 0x428, date = 2014-05-29
microcode: CPU2 updated to revision 0x428, date = 2014-05-29
microcode: CPU3 updated to revision 0x428, date = 2014-05-29
microcode: CPU4 updated to revision 0x428, date = 2014-05-29
microcode: CPU5 updated to revision 0x428, date = 2014-05-29
microcode: CPU6 updated to revision 0x428, date = 2014-05-29
microcode: CPU7 updated to revision 0x428, date = 2014-05-29
microcode: CPU8 updated to revision 0x428, date = 2014-05-29
microcode: CPU9 updated to revision 0x428, date = 2014-05-29
microcode: CPU10 updated to revision 0x428, date = 2014-05-29
microcode: CPU11 updated to revision 0x428, date = 2014-05-29
microcode: CPU12 updated to revision 0x428, date = 2014-05-29
microcode: CPU13 updated to revision 0x428, date = 2014-05-29
microcode: CPU14 updated to revision 0x428, date = 2014-05-29
microcode: CPU15 updated to revision 0x428, date = 2014-05-29
microcode: CPU16 updated to revision 0x428, date = 2014-05-29
microcode: CPU17 updated to revision 0x428, date = 2014-05-29
microcode: CPU18 updated to revision 0x428, date = 2014-05-29
microcode: CPU19 updated to revision 0x428, date = 2014-05-29
microcode: CPU20 updated to revision 0x428, date = 2014-05-29
microcode: CPU21 updated to revision 0x428, date = 2014-05-29
microcode: CPU22 updated to revision 0x428, date = 2014-05-29
microcode: CPU23 updated to revision 0x428, date = 2014-05-29
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 33038328k swap on /dev/mapper/vg_rosewill-lv_swap. Priority:-1 extents:1 across:33038328k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
ADDRCONF(NETDEV_UP): eth4: link is not ready
8021q: adding VLAN 0 to HW filter on device eth4
ADDRCONF(NETDEV_UP): eth5: link is not ready
8021q: adding VLAN 0 to HW filter on device eth5
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
igb: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
eth5: no IPv6 routers present
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts