dmesg - cdh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ce485fff] usable
BIOS-e820: [mem 0x00000000ce486000-0x00000000cea7cfff] reserved
BIOS-e820: [mem 0x00000000cea7d000-0x00000000cea8cfff] ACPI data
BIOS-e820: [mem 0x00000000cea8d000-0x00000000ceb9dfff] ACPI NVS
BIOS-e820: [mem 0x00000000ceb9e000-0x00000000cee89fff] reserved
BIOS-e820: [mem 0x00000000cee8a000-0x00000000cee8afff] usable
BIOS-e820: [mem 0x00000000cee8b000-0x00000000ceecdfff] ACPI NVS
BIOS-e820: [mem 0x00000000ceece000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: /DZ77GA-70K, BIOS GAZ7711H.86A.0066.2013.0521.1509 05/21/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 420000000 mask FF8000000 write-back
3 base 428000000 mask FFC000000 write-back
4 base 42C000000 mask FFE000000 write-back
5 base 42E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 base 0D0000000 mask FF0000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 16896MB, range: 128MB, type WB
reg 3, base: 17024MB, range: 64MB, type WB
reg 4, base: 17088MB, range: 32MB, type WB
reg 5, base: 17120MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
reg 7, base: 3328MB, range: 256MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16896MB, range: 256MB, type WB
reg 7, base: 17136MB, range: 16MB, type UC
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd820-0x000fd82f] mapped at [ffff8800000fd820]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x42ee00000-0x42effffff]
[mem 0x42ee00000-0x42effffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42edfffff]
[mem 0x42c000000-0x42edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
[mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xce485fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xce3fffff] page 2M
[mem 0xce400000-0xce485fff] page 4k
init_memory_mapping: [mem 0xcee8a000-0xcee8afff]
[mem 0xcee8a000-0xcee8afff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xceece000-0xcf7fffff]
[mem 0xceece000-0xceffffff] page 4k
[mem 0xcf000000-0xcf7fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000f0490 000024 (v02 INTEL)
ACPI: XSDT 00000000cea80070 000064 (v01 INTEL DZ77GA 00000042 AMI 00010013)
ACPI: FACP 00000000cea8a7a0 00010C (v05 INTEL DZ77GA 00000042 AMI 00010013)
ACPI: DSDT 00000000cea80168 00A636 (v02 INTEL DZ77GA 00000022 INTL 20051117)
ACPI: FACS 00000000ceb9c080 000040
ACPI: APIC 00000000cea8a8b0 000072 (v03 INTEL DZ77GA 00000042 AMI 00010013)
ACPI: FPDT 00000000cea8a928 000044 (v01 INTEL DZ77GA 00000042 AMI 00010013)
ACPI: MCFG 00000000cea8a970 00003C (v01 INTEL DZ77GA 00000042 MSFT 00000097)
ACPI: HPET 00000000cea8a9b0 000038 (v01 INTEL DZ77GA 00000042 ^.^ 00000005)
ACPI: SSDT 00000000cea8a9e8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000cea8ad58 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000cea8b708 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
Initmem setup node 0 [mem 0x00000000-0x42effffff]
NODE_DATA [mem 0x42efec000-0x42eff0fff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xce485fff]
node 0: [mem 0xcee8a000-0xcee8afff]
node 0: [mem 0xceece000-0xcf7fffff]
node 0: [mem 0x100000000-0x42effffff]
On node 0 totalpages: 4185429
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13175 pages used for memmap
DMA32 zone: 843193 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xce486000-0xcea7cfff]
PM: Registered nosave memory: [mem 0xcea7d000-0xcea8cfff]
PM: Registered nosave memory: [mem 0xcea8d000-0xceb9dfff]
PM: Registered nosave memory: [mem 0xceb9e000-0xcee89fff]
PM: Registered nosave memory: [mem 0xcee8b000-0xceecdfff]
PM: Registered nosave memory: [mem 0xcf800000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88042ec00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4120009
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16377776K/16741716K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 363940K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.201 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.40 BogoMIPS (lpj=13568804)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27137.60 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcea8d000-0xceb9dfff] (1118208 bytes)
PM: Registering ACPI NVS region [mem 0xcee8b000-0xceecdfff] (274432 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:02:18, date: 08/09/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cea29018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000cea2aa98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000cea2bc18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xef720000-0xef72ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xef73b000-0xef73b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xef700000-0xef71ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xef739000-0xef739fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xef738000-0xef7383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xef730000-0xef733fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xef737000-0xef7373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xef736000-0xef7367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xef735000-0xef7350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xef100000-0xef13ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01-04]
pci 0000:00:01.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xef1fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe9ffffff 64bit pref]
pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:01:00.0: bridge window [mem 0xec000000-0xef0fffff]
pci 0000:01:00.0: bridge window [mem 0xd0000000-0xe9ffffff 64bit pref]
pci 0000:03:00.0: [10de:1188] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xb000-0xb07f]
pci 0000:03:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xef080000-0xef083fff]
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:08.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:02:08.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:04:00.0: [10de:1188] type 00 class 0x030200
pci 0000:04:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xa000-0xa07f]
pci 0000:04:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xed000000-0xed003fff]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xa000-0xafff]
pci 0000:02:10.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:02:10.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xef620000-0xef63ffff]
pci 0000:06:00.0: reg 0x14: [mem 0xef600000-0xef61ffff]
pci 0000:06:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xef640000-0xef643fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xef600000-0xef6fffff]
pci 0000:07:00.0: [10b5:8606] type 01 class 0x060400
pci 0000:07:00.0: reg 0x10: [mem 0xef400000-0xef41ffff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 07-0e]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xef200000-0xef4fffff]
pci 0000:08:01.0: [10b5:8606] type 01 class 0x060400
pci 0000:08:01.0: PME# supported from D0 D3hot D3cold
pci 0000:08:04.0: [10b5:8606] type 01 class 0x060400
pci 0000:08:04.0: PME# supported from D0 D3hot D3cold
pci 0000:08:05.0: [10b5:8606] type 01 class 0x060400
pci 0000:08:05.0: PME# supported from D0 D3hot D3cold
pci 0000:08:07.0: [10b5:8606] type 01 class 0x060400
pci 0000:08:07.0: PME# supported from D0 D3hot D3cold
pci 0000:08:09.0: [10b5:8606] type 01 class 0x060400
pci 0000:08:09.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08-0e]
pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:00.0: bridge window [mem 0xef200000-0xef3fffff]
pci 0000:08:01.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0a:00.0: reg 0x10: [io 0xd040-0xd047]
pci 0000:0a:00.0: reg 0x14: [io 0xd030-0xd033]
pci 0000:0a:00.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:0a:00.0: reg 0x1c: [io 0xd010-0xd013]
pci 0000:0a:00.0: reg 0x20: [io 0xd000-0xd00f]
pci 0000:0a:00.0: reg 0x24: [mem 0xef320000-0xef3201ff]
pci 0000:0a:00.0: reg 0x30: [mem 0xef300000-0xef31ffff pref]
pci 0000:0a:00.0: PME# supported from D3hot
pci 0000:08:04.0: PCI bridge to [bus 0a]
pci 0000:08:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:08:04.0: bridge window [mem 0xef300000-0xef3fffff]
pci 0000:08:05.0: PCI bridge to [bus 0b]
pci 0000:08:07.0: PCI bridge to [bus 0c]
pci 0000:0d:00.0: [1283:8892] type 01 class 0x060401
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:09.0: PCI bridge to [bus 0d-0e]
pci 0000:08:09.0: bridge window [mem 0xef200000-0xef2fffff]
pci 0000:0e:02.0: [104c:8023] type 00 class 0x0c0010
pci 0000:0e:02.0: reg 0x10: [mem 0xef204000-0xef2047ff]
pci 0000:0e:02.0: reg 0x14: [mem 0xef200000-0xef203fff]
pci 0000:0e:02.0: supports D1 D2
pci 0000:0e:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0d:00.0: PCI bridge to [bus 0e] (subtractive decode)
pci 0000:0d:00.0: bridge window [mem 0xef200000-0xef2fffff]
pci 0000:0d:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:0d:00.0: bridge window [mem 0xef200000-0xef2fffff] (subtractive decode)
pci 0000:0d:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:0d:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xce486000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcee8b000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xea000000-0xea000fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:08.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:02:08.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xa000-0xafff]
pci 0000:02:10.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:02:10.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xa000-0xbfff]
pci 0000:01:00.0: bridge window [mem 0xec000000-0xef0fffff]
pci 0000:01:00.0: bridge window [mem 0xd0000000-0xe9ffffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-04]
pci 0000:00:01.0: bridge window [io 0xa000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xef1fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xef600000-0xef6fffff]
pci 0000:08:01.0: PCI bridge to [bus 09]
pci 0000:08:04.0: PCI bridge to [bus 0a]
pci 0000:08:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:08:04.0: bridge window [mem 0xef300000-0xef3fffff]
pci 0000:08:05.0: PCI bridge to [bus 0b]
pci 0000:08:07.0: PCI bridge to [bus 0c]
pci 0000:0d:00.0: PCI bridge to [bus 0e]
pci 0000:0d:00.0: bridge window [mem 0xef200000-0xef2fffff]
pci 0000:08:09.0: PCI bridge to [bus 0d-0e]
pci 0000:08:09.0: bridge window [mem 0xef200000-0xef2fffff]
pci 0000:07:00.0: PCI bridge to [bus 08-0e]
pci 0000:07:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:00.0: bridge window [mem 0xef200000-0xef3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 07-0e]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xef200000-0xef4fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 12 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xec000000-0xef1fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xec000000-0xef0fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xee000000-0xef0fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xec000000-0xed0fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xef600000-0xef6fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xef200000-0xef4fffff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xef200000-0xef3fffff]
pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xef300000-0xef3fffff]
pci_bus 0000:0d: resource 1 [mem 0xef200000-0xef2fffff]
pci_bus 0000:0e: resource 1 [mem 0xef200000-0xef2fffff]
pci_bus 0000:0e: resource 5 [mem 0xef200000-0xef2fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xca486000-0xce486000] (64MB) mapped at [ffff8800ca486000-ffff8800ce485fff]
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1407578538.444:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32024
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:01:00.0: irq 41 for MSI/MSI-X
pcieport 0000:02:08.0: irq 42 for MSI/MSI-X
pcieport 0000:02:10.0: irq 43 for MSI/MSI-X
pcieport 0000:07:00.0: irq 44 for MSI/MSI-X
pcieport 0000:08:01.0: irq 45 for MSI/MSI-X
pcieport 0000:08:04.0: irq 46 for MSI/MSI-X
pcieport 0000:08:05.0: irq 47 for MSI/MSI-X
pcieport 0000:08:07.0: irq 48 for MSI/MSI-X
pcieport 0000:08:09.0: irq 49 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe9000000, mapped to 0xffffc90009b80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xef738000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xef737000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 50 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:707:21
memory memory61: hash matches
rtc_cmos 00:05: setting system clock to 2014-08-09 10:02:19 UTC (1407578539)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[113]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
firewire_ohci 0000:0e:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:6c:0c:a4
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:06:00.0: irq 53 for MSI/MSI-X
e1000e 0000:06:00.0: irq 54 for MSI/MSI-X
e1000e 0000:06:00.0: irq 55 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xef736000 port 0xef736100 irq 52
ata2: SATA max UDMA/133 abar m2048@0xef736000 port 0xef736180 irq 52
ata3: SATA max UDMA/133 abar m2048@0xef736000 port 0xef736200 irq 52
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:0a:00.0: irq 56 for MSI/MSI-X
ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xef320000 port 0xef320100 irq 56
ata8: SATA max UDMA/133 abar m512@0xef320000 port 0xef320180 irq 56
e1000e 0000:06:00.0 eth1: registered PHC clock
e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:22:4d:7a:29:4a
e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:0e:02.0: created device fw0: GUID 00224dffff7d3487, S400
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: supports DRM functions and may not be fully accessible
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: configured for UDMA/133
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Crucial_CT960M500SSD1, MU05, max UDMA/133
ata2.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: supports DRM functions and may not be fully accessible
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1.00: ATA-9: INTEL SSDSC2CW180A3, 400i, max UDMA/133
ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW18 400i PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA Crucial_CT960M50 MU05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sda: sda1
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1 sdc2 < sdc5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 47 bits of entropy available
init: plymouth-upstart-bridge main process (188) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (203) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.0 Hub 456
usb 3-1: Manufacturer: GenesysLogic
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
Adding 16713724k swap on /dev/sdc5. Priority:-1 extents:1 across:16713724k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
tsc: Refined TSC clocksource calibration: 3392.295 MHz
systemd-udevd[310]: starting version 204
lp: driver loaded but no devices found
mei_me 0000:00:16.0: irq 57 for MSI/MSI-X
wmi: Mapper loaded
ppdev: user-space parallel port driver
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.RLED.DBG0 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
usb 3-4: new high-speed USB device number 3 using xhci_hcd
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
checking generic (e9000000 130000) vs hw (e0000000 8000000)
checking generic (e9000000 130000) vs hw (e8000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:03:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... signature not found
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4016f601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000006
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4016f601 for NID 0x1d
realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0899
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
usb 3-4: New USB device found, idVendor=05e3, idProduct=0610
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB2.0 Hub 456
usb 3-4: Manufacturer: GenesysLogic
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 3 ports detected
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.04.1e.00.0e
nouveau 0000:03:00.0: irq 59 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:03:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:03:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 8199642 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 04832fb6 0f420010
nouveau [ DRM] DCB outp 04: 04032f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 01000131
nouveau [ DRM] DCB conn 02: 00020246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=05e3, idProduct=0612
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.0 Hub 123
usb 4-1: Manufacturer: GenesysLogic
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
nouveau [ DRM] allocated 2560x1440 fb: 0x80000, bo ffff8804169c0400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:03:00.1: Disabling 64bit DMA
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:04:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:04:00.0] Family : NVE0
nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:04:00.0] ... signature not found
nouveau [ VBIOS][0000:04:00.0] checking PROM for image...
hda-intel 0000:03:00.1: Enable delay in RIRB handling
usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0612
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB3.0 Hub 123
usb 4-4: Manufacturer: GenesysLogic
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 3 ports detected
type=1400 audit(1407578540.960:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=459 comm="apparmor_parser"
type=1400 audit(1407578540.960:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
type=1400 audit(1407578540.960:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
type=1400 audit(1407578540.960:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
type=1400 audit(1407578540.960:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
type=1400 audit(1407578540.960:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
random: nonblocking pool is initialized
type=1400 audit(1407578540.968:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=472 comm="apparmor_parser"
intel_rapl: domain uncore energy ctr 0:0 not working, skip
nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
nouveau [ VBIOS][0000:04:00.0] using image from PROM
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 80.04.1e.00.0f
nouveau [ DEVINIT][0000:04:00.0] adaptor not initialised
nouveau [ VBIOS][0000:04:00.0] running init tables
usb 1-1.6: new full-speed USB device number 3 using ehci-pci
usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Receiver
usb 1-1.6: Manufacturer: Logitech
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
hidraw: raw HID events driver (C) Jiri Kosina
nouveau 0000:04:00.0: irq 60 for MSI/MSI-X
nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
nouveau [ PFB][0000:04:00.0] RAM type: GDDR5
nouveau [ PFB][0000:04:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nouveau [ VOLT][0000:04:00.0] GPU voltage: 987500uv
input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/input/input11
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:1a.0-1.6:1
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/input/input12
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:1a.0-1.6:2
systemd-udevd[326]: renamed network interface eth0 to eth7
nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
nouveau [ PTHERM][0000:04:00.0] fan management: automatic
nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
nouveau [ CLK][0000:04:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:04:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:04:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] --: core 324 MHz memory 324 MHz
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input10
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB conn 00: 00001030
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.1.1 20120801 for 0000:04:00.0 on minor 1
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Disabling 64bit DMA
systemd-udevd[327]: renamed network interface eth1 to rename3
hda-intel 0000:04:00.1: Enable delay in RIRB handling
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Switched to clocksource tsc
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1407578541.428:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=656 comm="apparmor_parser"
type=1400 audit(1407578541.428:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=656 comm="apparmor_parser"
init: failsafe main process (623) killed by TERM signal
e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:10.0/0000:04:00.1/sound/card2/input15
e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
init: rc-sysinit main process (668) killed by TERM signal
IPv6: ADDRCONF(NETDEV_UP): rename3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): rename3: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1119) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -22
show_signal_msg: 108 callbacks suppressed
conftest[11401]: segfault at 0 ip 00000000004005c0 sp 00007fffaec6d0e0 error 4 in conftest[400000+1000]
conftest[11430]: segfault at 0 ip 00007f9311d010a6 sp 00007fffaf1b5008 error 4 in libc-2.19.so[7f9311bc0000+1bc000]