dmesg - xw8400-2-scimark2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.23.3.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Jul 29 11:12:56 CDT 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffc2e40 (usable)
BIOS-e820: 00000000cffc2e40 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.5 present.
SMBIOS version 2.5 @ 0xF9BF0
DMI: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.24c 03/20/2009
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 3F80000000 write-back
1 base 0080000000 mask 3FC0000000 write-back
2 base 00C0000000 mask 3FF0000000 write-back
3 base 0100000000 mask 3F00000000 write-back
4 base 0200000000 mask 3FE0000000 write-back
5 base 0220000000 mask 3FF0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcffc2 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cffc2000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cffc2000 page 4k
kernel direct mapping tables up to cffc2000 @ 8000-e000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ c000-12000
RAMDISK: 36fa2000 - 37fef37e
ACPI: RSDP 00000000000e9e10 00024 (v02 COMPAQ)
ACPI: XSDT 00000000cffc58ec 00064 (v01 HPQOEM SLIC-WKS 20090320 00000000)
ACPI: FACP 00000000cffc5a94 000F4 (v03 COMPAQ GREENCRK 00000001 00000000)
ACPI Error: 32/64X address mismatch in Gpe0Block: 0000F828/000000000001F030, using 32 (20090903/tbfadt-427)
ACPI: DSDT 00000000cffc5ee2 02171 (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
ACPI: FACS 00000000cffc5800 00040
ACPI: SSDT 00000000cffc8053 07620 (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
ACPI: APIC 00000000cffc5b88 000D4 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: ASF! 00000000cffc5c5c 0006A (v32 COMPAQ GREENCRK 00000001 00000000)
ACPI: MCFG 00000000cffc5cc6 0003C (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: TCPA 00000000cffc5eb0 00032 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: SLIC 00000000cffc5d02 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 00000000cffc5e78 00038 (v01 COMPAQ GREENCRK 00000001 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
NODE_DATA [0000000000011000 - 0000000000044fff]
bootmap [0000000000045000 - 000000000008afff] pages 46
(8 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0036fa2000 - 0037fef37e] RAMDISK ==> [0036fa2000 - 0037fef37e]
#4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#5 [0002021000 - 00020210e6] BRK ==> [0002021000 - 00020210e6]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
found SMP MP-table at [ffff8800000fffc0] fffc0
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 8960MB)
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009d
0: 0x00000100 -> 0x000cffc2
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096990
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3830 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833530 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec80000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 00000000cffc2000 - 00000000cffc3000
PM: Registered nosave memory: 00000000cffc3000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065520
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8038340k/9175040k available (5330k kernel code, 787080k absent, 349620k reserved, 7009k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1288
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2992.715 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.43 BogoMIPS (lpj=2992715)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21786 entries in 86 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 0b
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (23940.98 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 127
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e7ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88022cd611f0), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed003ff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf2500000-0xf2503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x4000-0x401f]
pci 0000:00:1d.1: reg 20: [io 0x4020-0x403f]
pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
pci 0000:00:1d.3: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.7: reg 10: [mem 0xf2504000-0xf25043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10: [io 0x40d0-0x40d7]
pci 0000:00:1f.1: reg 14: [io 0x40f0-0x40f3]
pci 0000:00:1f.1: reg 18: [io 0x40d8-0x40df]
pci 0000:00:1f.1: reg 1c: [io 0x40f4-0x40f7]
pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
pci 0000:00:1f.2: reg 10: [io 0x40e0-0x40e7]
pci 0000:00:1f.2: reg 14: [io 0x40f8-0x40fb]
pci 0000:00:1f.2: reg 18: [io 0x40e8-0x40ef]
pci 0000:00:1f.2: reg 1c: [io 0x40fc-0x40ff]
pci 0000:00:1f.2: reg 20: [io 0x4080-0x409f]
pci 0000:00:1f.2: reg 24: [mem 0xf2504400-0xf25047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
pci 0000:10:00.3: PME# disabled
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf22fffff]
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:00.0: PME# disabled
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
pci 0000:1e:01.0: PME# disabled
pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:10:00.0: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:10:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:1e:00.0: PCI bridge to [bus 20-20]
pci 0000:1e:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:1e:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:1e:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:1f:00.0: reg 10: [mem 0xf2000000-0xf200ffff 64bit]
pci 0000:1f:00.0: PME# supported from D3hot D3cold
pci 0000:1f:00.0: PME# disabled
pci 0000:1f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:1e:01.0: PCI bridge to [bus 1f-1f]
pci 0000:1e:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:1e:01.0: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:1e:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:11:06.0: reg 10: [io 0x2000-0x20ff]
pci 0000:11:06.0: reg 14: [mem 0xf2150000-0xf2153fff 64bit]
pci 0000:11:06.0: reg 1c: [mem 0xf2140000-0xf214ffff 64bit]
pci 0000:11:06.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:11:06.0: supports D1 D2
pci 0000:11:0a.0: reg 10: [io 0x2400-0x24ff]
pci 0000:11:0a.0: reg 14: [mem 0xf2100000-0xf211ffff 64bit]
pci 0000:11:0a.0: reg 1c: [mem 0xf2120000-0xf213ffff 64bit]
pci 0000:11:0a.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:11:0a.0: supports D1 D2
pci 0000:10:00.3: PCI bridge to [bus 11-11]
pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
pci 0000:10:00.3: bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:10:00.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 60-60]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:40:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
pci 0000:40:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:40:00.0: reg 1c: [mem 0xf1000000-0xf1ffffff 64bit]
pci 0000:40:00.0: reg 24: [io 0x1000-0x107f]
pci 0000:40:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:40:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 40-40]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus fe-fe]
pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0: PCI bridge to [bus fd-fd]
pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:07.0: PCI bridge to [bus fc-fc]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:04.0: reg 10: [mem 0xf2300000-0xf231ffff]
pci 0000:09:04.0: reg 14: [mem 0xf2320000-0xf233ffff]
pci 0000:09:04.0: reg 18: [io 0x3000-0x303f]
pci 0000:09:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:09:04.0: PME# supported from D0 D3hot D3cold
pci 0000:09:04.0: PME# disabled
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:08:00.0: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:08:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:05.0: reg 10: [mem 0xf2404000-0xf24047ff]
pci 0000:01:05.0: reg 14: [mem 0xf2400000-0xf2403fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.MUPP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.MUPP.PTE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.MUPP.PTE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH2.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1.PXA_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88022cd611f0), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88022cd611f0), AE_ALREADY_EXISTS
ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
vgaarb: device added: PCI:0000:40:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:40:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfec80000-0xfec800ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:02: [mem 0xfec10000-0xfec100ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 7]
pnp 00:09: [dma 3]
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077d]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [irq 4]
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0b: [irq 6]
pnp 00:0b: [dma 2]
pnp 00:0b: [io 0x03f0-0x03f5]
pnp 00:0b: [io 0x03f7]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0d: [mem 0xfed00000-0xfed003ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0e: [io 0x0010-0x001f]
pnp 00:0e: [io 0x0050-0x0053]
pnp 00:0e: [io 0x0072-0x0077]
pnp 00:0e: [io 0x0090-0x009f]
pnp 00:0e: [io 0x04d0-0x04d1]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [io 0x0400-0x041f]
pnp 00:0f: [io 0x0420-0x043f]
pnp 00:0f: [io 0x0440-0x045f]
pnp 00:0f: [io 0x0460-0x047f]
pnp 00:0f: [io 0x0480-0x048f]
pnp 00:0f: [io 0x0490-0x049f]
pnp 00:0f: [io 0xf800-0xf81f]
pnp 00:0f: [io 0xf820-0xf83f]
pnp 00:0f: [io 0xf840-0xf85f]
pnp 00:0f: [io 0xf860-0xf87f]
pnp 00:0f: [io 0xfa00-0xfa3f]
pnp 00:0f: [io 0xfc00-0xfc7f]
pnp 00:0f: [io 0xfc80-0xfcff]
pnp 00:0f: [io 0xfe00-0xfe7f]
pnp 00:0f: [io 0xfe80-0xfeff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: [mem 0xfed1c000-0xfed1ffff]
pnp 00:10: [mem 0xffe00000-0xffffffff]
pnp 00:10: [mem 0xfee00000-0xfeefffff]
pnp 00:10: [mem 0xfe700000-0xfe7003ff]
pnp 00:10: [mem 0xfe600000-0xfe6fffff]
pnp 00:10: [mem 0xfe000000-0xfe01ffff]
pnp 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:11: [mem 0x00000000-0x0009ffff]
pnp 00:11: [mem 0x000c0000-0x000e7fff]
pnp 00:11: [mem 0x000e8000-0x000effff]
pnp 00:11: [mem 0x000f0000-0x000fffff]
pnp 00:11: [mem 0x00100000-0xcfffffff]
pnp 00:11: [mem 0xfeda0000-0xfedbffff]
pnp 00:11: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x000c0000-0x000e7fff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x000e8000-0x000effff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x000c0000-0x000e7fff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x000e8000-0x000effff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: disabling [mem 0x000f0000-0x000fffff disabled] because it overlaps 0000:11:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:12: [mem 0xe0000000-0xefffffff]
pnp 00:12: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 19 devices
ACPI: ACPI bus type pnp unregistered
system 00:0e: [io 0x04d0-0x04d1] has been reserved
system 00:0f: [io 0x0400-0x041f] has been reserved
system 00:0f: [io 0x0420-0x043f] has been reserved
system 00:0f: [io 0x0440-0x045f] has been reserved
system 00:0f: [io 0x0460-0x047f] has been reserved
system 00:0f: [io 0x0480-0x048f] has been reserved
system 00:0f: [io 0x0490-0x049f] has been reserved
system 00:0f: [io 0xf800-0xf81f] has been reserved
system 00:0f: [io 0xf820-0xf83f] has been reserved
system 00:0f: [io 0xf840-0xf85f] has been reserved
system 00:0f: [io 0xf860-0xf87f] has been reserved
system 00:0f: [io 0xfa00-0xfa3f] has been reserved
system 00:0f: [io 0xfc00-0xfc7f] has been reserved
system 00:0f: [io 0xfc80-0xfcff] has been reserved
system 00:0f: [io 0xfe00-0xfe7f] has been reserved
system 00:0f: [io 0xfe80-0xfeff] has been reserved
system 00:10: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:10: [mem 0xffe00000-0xffffffff] has been reserved
system 00:10: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:10: [mem 0xfe700000-0xfe7003ff] has been reserved
system 00:10: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:10: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:11: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:11: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:12: [mem 0xe0000000-0xefffffff] has been reserved
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:02.0: BAR 15: assigned [mem 0xf2600000-0xf27fffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2800000-0xf28fffff pref]
pci 0000:10:00.3: BAR 15: assigned [mem 0xf2600000-0xf27fffff pref]
pci 0000:1e:00.0: PCI bridge to [bus 20-20]
pci 0000:1e:00.0: PCI bridge to [bus 20-20]
pci 0000:1e:00.0: bridge window [io disabled]
pci 0000:1e:00.0: bridge window [mem disabled]
pci 0000:1e:00.0: bridge window [mem pref disabled]
pci 0000:1e:01.0: PCI bridge to [bus 1f-1f]
pci 0000:1e:01.0: PCI bridge to [bus 1f-1f]
pci 0000:1e:01.0: bridge window [io disabled]
pci 0000:1e:01.0: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:1e:01.0: bridge window [mem pref disabled]
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: PCI bridge to [bus 1e-20]
pci 0000:10:00.0: bridge window [io disabled]
pci 0000:10:00.0: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:10:00.0: bridge window [mem pref disabled]
pci 0000:11:06.0: BAR 6: assigned [mem 0xf2600000-0xf26fffff pref]
pci 0000:11:0a.0: BAR 6: assigned [mem 0xf2700000-0xf27fffff pref]
pci 0000:10:00.3: PCI bridge to [bus 11-11]
pci 0000:10:00.3: PCI bridge to [bus 11-11]
pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
pci 0000:10:00.3: bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:10:00.3: bridge window [mem 0xf2600000-0xf27fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: PCI bridge to [bus 10-20]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf22fffff]
pci 0000:00:02.0: bridge window [mem 0xf2600000-0xf27fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 60-60]
pci 0000:00:03.0: PCI bridge to [bus 60-60]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:40:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:04.0: PCI bridge to [bus 40-40]
pci 0000:00:04.0: PCI bridge to [bus 40-40]
pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus fe-fe]
pci 0000:00:05.0: PCI bridge to [bus fe-fe]
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus fd-fd]
pci 0000:00:06.0: PCI bridge to [bus fd-fd]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus fc-fc]
pci 0000:00:07.0: PCI bridge to [bus fc-fc]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:08:00.0: BAR 15: assigned [mem 0xf2800000-0xf28fffff pref]
pci 0000:09:04.0: BAR 6: assigned [mem 0xf2800000-0xf281ffff pref]
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:08:00.0: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:08:00.0: bridge window [mem 0xf2800000-0xf28fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: PCI bridge to [bus 08-09]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1c.0: bridge window [mem 0xf2800000-0xf29fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf2400000-0xf24fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:10:00.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:1e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:1e:00.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:1e:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:1e:01.0: setting latency timer to 64
pci 0000:10:00.3: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 10 [io 0x0d00-0xffff]
pci_bus 0000:10: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:10: resource 1 [mem 0xf2000000-0xf22fffff]
pci_bus 0000:10: resource 2 [mem 0xf2600000-0xf27fffff pref]
pci_bus 0000:1e: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:1f: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:11: resource 1 [mem 0xf2100000-0xf21fffff]
pci_bus 0000:11: resource 2 [mem 0xf2600000-0xf27fffff pref]
pci_bus 0000:40: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:40: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:40: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xf2300000-0xf23fffff]
pci_bus 0000:08: resource 2 [mem 0xf2800000-0xf29fffff pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xf2300000-0xf23fffff]
pci_bus 0000:09: resource 2 [mem 0xf2800000-0xf28fffff pref]
pci_bus 0000:01: resource 1 [mem 0xf2400000-0xf24fffff]
pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 5 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 9 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 10 [io 0x0d00-0xffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:40:00.0: Boot video device
pci 0000:08:00.0: rerouting interrupts for [8086:032c]
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16692k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1406844975.523:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15732
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 970DD299E15A8A25
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 72 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x2220
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000cffd0e30 008C4 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf2504000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00004060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-07-31 22:16:16 UTC (1406844976)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 796k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
mptsas 0000:11:06.0: PCI INT A -> GSI 62 (level, low) -> IRQ 62
mptbase: ioc0: Initiating bringup
usb 1-2: new high speed USB device number 3 using ehci_hcd
usb 1-2: New USB device found, idVendor=054c, idProduct=0197
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: DRX-530UL
usb 1-2: Manufacturer: Sony
usb 1-2: SerialNumber: DRX-530UL_SYQ050982
usb 1-2: configuration #1 chosen from 1 choice
ioc0: LSISAS1064 A4: Capabilities={Initiator}
Refined TSC clocksource calibration: 2992.499 MHz.
Switching to clocksource tsc
usb 2-1: new low speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=03f0, idProduct=2224
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keyboard
usb 2-1: Manufacturer: BTC
usb 2-1: configuration #1 chosen from 1 choice
input: BTC USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:03F0:2224.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Keyboard] on usb-0000:00:1d.0-1/input0
usb 4-2: new low speed USB device number 2 using uhci_hcd
usb 4-2: New USB device found, idVendor=046d, idProduct=c016
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Optical USB Mouse
usb 4-2: Manufacturer: Logitech
usb 4-2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2/input0
scsi0 : ioc0: LSISAS1064 A4, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=62
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x500000e011e924c2
scsi 0:0:0:0: Direct-Access FUJITSU MAX3073RC HPF1 PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x500000e016cba422
scsi 0:0:1:0: Direct-Access FUJITSU MBA3073RC HPF1 PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x500000e01191d742
scsi 0:0:2:0: Direct-Access FUJITSU MAX3073RC 0104 PQ: 0 ANSI: 3
Fusion MPT SPI Host driver 3.04.20
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
mptspi 0000:11:0a.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1020A A1: Capabilities={Initiator}
scsi1 : ioc1: LSI53C1020A A1, FwRev=01032500h, Ports=1, MaxQ=222, IRQ=56
scsi 1:0:1:0: Optical Device SONY SMO-F551-SD 1.04 PQ: 0 ANSI: 2
scsi target1:0:1: Beginning Domain Validation
scsi target1:0:1: Domain Validation skipping write tests
scsi target1:0:1: Ending Domain Validation
scsi target1:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
scsi 1:0:6:0: CD-ROM SONY DVD RW DW-D22A BYTA PQ: 0 ANSI: 2
scsi target1:0:6: Beginning Domain Validation
scsi target1:0:6: Domain Validation skipping write tests
scsi target1:0:6: Ending Domain Validation
scsi target1:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
ata2: port disabled. ignoring.
ata1.00: ATAPI: TSSTcorpDVD-ROM TS-H352C, bb01, max UDMA/44
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H352C bb01 PQ: 0 ANSI: 5
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata3: SATA max UDMA/133 abar m1024@0xf2504400 port 0xf2504500 irq 19
ata4: SATA max UDMA/133 abar m1024@0xf2504400 port 0xf2504580 irq 19
ata5: SATA max UDMA/133 abar m1024@0xf2504400 port 0xf2504600 irq 19
ata6: SATA max UDMA/133 abar m1024@0xf2504400 port 0xf2504680 irq 19
ata7: SATA max UDMA/133 abar m1024@0xf2504400 port 0xf2504700 irq 19
ata8: SATA max UDMA/133 abar m1024@0xf2504400 port 0xf2504780 irq 19
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3.00: ATAPI: hp DVD-RAM GH80N, RF01, max UDMA/100, ATAPI AN
ata3.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM hp DVD-RAM GH80N RF01 PQ: 0 ANSI: 5
firewire_ohci 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
Initializing USB Mass Storage driver...
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 1:0:1:0: [sdd] Attached SCSI removable disk
sd 0:0:1:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:0:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 0:0:2:0: [sdc] 143638992 512-byte logical blocks: (73.5 GB/68.4 GiB)
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: bf 00 00 08
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: cf 00 10 08
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdc:
sda:
sdb:
sdc1
sda1 sda2 sda3 sda4 <
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:6:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
sr 2:0:0:0: Attached scsi CD-ROM sr1
sr2: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 4:0:0:0: Attached scsi CD-ROM sr2
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
firewire_core: created device fw0: GUID 0060b000001f323e, S400
dracut: Mounted root filesystem /dev/sda3
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1406844988.400:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
usb-storage: device scan complete
scsi 10:0:0:0: CD-ROM SONY DVD RW DRU-710A BY02 PQ: 0 ANSI: 0
sr3: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr 10:0:0:0: Attached scsi CD-ROM sr3
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Jul 29 2014
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 73 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC262: SKU not ready 0x411111f0
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:40:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:40:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:40:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov 26 21:25:36 PST 2013
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 1:0:1:0: Attached scsi generic sg3 type 7
sr 1:0:6:0: Attached scsi generic sg4 type 5
sr 2:0:0:0: Attached scsi generic sg5 type 5
sr 4:0:0:0: Attached scsi generic sg6 type 5
sr 10:0:0:0: Attached scsi generic sg7 type 5
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI: resource (null) [io 0xf828-0xf82f] conflicts with ACPI region PMIO [io 0xf800-0xf84f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI: WMI: Mapper loaded
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
e1000 0000:09:04.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
e1000 0000:09:04.0: eth0: (PCI:66MHz:32-bit) 00:0e:0c:a7:a6:2d
e1000 0000:09:04.0: eth0: Intel(R) PRO/1000 Network Connection
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.132 (May 21, 2013)
tg3 0000:1f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:1f:00.0: setting latency timer to 64
tg3 0000:1f:00.0: eth1: Tigon3 [partno(BCM95752) rev 6001] (PCI Express) MAC address 00:1a:4b:53:24:3e
tg3 0000:1f:00.0: eth1: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:1f:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:1f:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
microcode: CPU0 sig=0x6fb, pf=0x4, revision=0xb7
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU1 sig=0x6fb, pf=0x4, revision=0xb7
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU2 sig=0x6fb, pf=0x4, revision=0xb7
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU3 sig=0x6fb, pf=0x4, revision=0xb7
platform microcode: firmware: requesting intel-ucode/06-0f-0b
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
microcode: CPU0 updated to revision 0xbc, date = 2010-10-03
microcode: CPU1 updated to revision 0xbc, date = 2010-10-03
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
microcode: CPU2 updated to revision 0xbc, date = 2010-10-03
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0xf860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU3 updated to revision 0xbc, date = 2010-10-03
ppdev: user-space parallel port driver
kvm: disabled by bios
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
Adding 4194296k swap on /dev/sda5. Priority:-1 extents:1 across:4194296k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
tg3 0000:1f:00.0: irq 74 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:1f:00.0: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:1f:00.0: eth1: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
ADDRCONF(NETDEV_UP): eth0: link is not ready
8021q: adding VLAN 0 to HW filter on device eth0
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
lo: Disabled Privacy Extensions
eth1: no IPv6 routers present
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.