dmesg - z400-2-scimark2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.23.3.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Jul 29 11:12:56 CDT 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000defa5800 (usable)
BIOS-e820: 00000000defa5800 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xF9C00
DMI: Hewlett-Packard HP Z400 Workstation/0AE4h, BIOS 786G3 v03.20 06/10/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0E0000000 mask FE0000000 uncachable
1 base 120000000 mask FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdefa5 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000defa5000
0000000000 - 00dee00000 page 2M
00dee00000 - 00defa5000 page 4k
kernel direct mapping tables up to defa5000 @ 8000-e000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ c000-e000
RAMDISK: 36f9e000 - 37feff9b
ACPI: RSDP 00000000000e9010 00024 (v02 HPQOEM)
ACPI: XSDT 00000000defb88e8 00064 (v01 HPQOEM SLIC-WKS 20110610 00000000)
ACPI: FACP 00000000defb8a88 000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DSDT 00000000defb90a3 0A2BD (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 00000000defb8800 00040
ACPI: APIC 00000000defb8b7c 00108 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: ASF! 00000000defb8c84 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
ACPI: MCFG 00000000defb8ce7 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: TCPA 00000000defb8d23 00032 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: HPET 00000000defb8ecb 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DMAR 00000000defb8f03 00170 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SSDT 00000000defc4a4f 0123C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [000000000000d000 - 0000000000040fff]
bootmap [0000000000041000 - 0000000000064fff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [0036f9e000 - 0037feff9b] RAMDISK ==> [0036f9e000 - 0037feff9b]
#4 [0000095800 - 0000100000] BIOS reserved ==> [0000095800 - 0000100000]
#5 [0002021000 - 0002021134] BRK ==> [0002021000 - 0002021134]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
found SMP MP-table at [ffff8800000f9bf0] f9bf0
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4608MB)
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000095
0: 0x00000100 -> 0x000defa5
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1044281
DMA zone: 56 pages used for memmap
DMA zone: 114 pages reserved
DMA zone: 3818 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 894941 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 12 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000095000 - 0000000000096000
PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
PM: Registered nosave memory: 00000000defa5000 - 00000000defa6000
PM: Registered nosave memory: 00000000defa6000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u131072
pcpu-alloc: s94872 r8192 d23912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028039
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3883832k/4718592k available (5330k kernel code, 541468k absent, 293292k reserved, 7009k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:944
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.651 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.30 BogoMIPS (lpj=2666651)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21786 entries in 86 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f02076
dmar: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
dmar: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
dmar: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
dmar: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
dmar: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
dmar: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
dmar: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
dmar: RMRR base: 0x000000defd7000 end: 0x000000defd7fff
dmar: ATSR flags: 0x0
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU W3520 @ 2.67GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (21333.20 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88011e6bc358), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xeeffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed003ff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xefff]
pci_root PNP0A08:00: host bridge window expanded to [io 0x0000-0x03af]; [io 0x0000-0x03af] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xeeffffff]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff]
pci_bus 0000:00: root bus resource [io 0x1000-0xefff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xc000-0xc01f]
pci 0000:00:1a.1: reg 20: [io 0xc020-0xc03f]
pci 0000:00:1a.2: reg 20: [io 0xc040-0xc05f]
pci 0000:00:1a.7: reg 10: [mem 0xee004800-0xee004bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xee000000-0xee003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xc060-0xc07f]
pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f]
pci 0000:00:1d.2: reg 20: [io 0xc0a0-0xc0bf]
pci 0000:00:1d.7: reg 10: [mem 0xee004c00-0xee004fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: no compatible bridge window for [io 0xf800-0xf87f]
pci 0000:00:1f.0: no compatible bridge window for [io 0xfa00-0xfa3f]
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.2: reg 10: [io 0xc100-0xc107]
pci 0000:00:1f.2: reg 14: [io 0xc110-0xc113]
pci 0000:00:1f.2: reg 18: [io 0xc108-0xc10f]
pci 0000:00:1f.2: reg 1c: [io 0xc114-0xc117]
pci 0000:00:1f.2: reg 20: [io 0xc0c0-0xc0df]
pci 0000:00:1f.2: reg 24: [mem 0xee004000-0xee0047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:03:00.0: reg 10: [mem 0xec000000-0xec01ffff]
pci 0000:03:00.0: reg 14: [mem 0xec020000-0xec03ffff]
pci 0000:03:00.0: reg 18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.1: reg 10: [mem 0xec040000-0xec05ffff]
pci 0000:03:00.1: reg 14: [mem 0xec060000-0xec07ffff]
pci 0000:03:00.1: reg 18: [io 0xd020-0xd03f]
pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0f:00.0: reg 10: [mem 0xea000000-0xeaffffff]
pci 0000:0f:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:0f:00.0: reg 1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:0f:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:0f:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:0f:00.1: reg 10: [mem 0xeb000000-0xeb003fff]
pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xea000000-0xeb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 28-28]
pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: reg 10: [mem 0xed000000-0xed00ffff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xed000000-0xed0fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 37-37] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xeeffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xefff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IOH7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88011e6bc358), AE_ALREADY_EXISTS
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88011e6bc358), AE_ALREADY_EXISTS
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Root Bridge [NHL1] (domain 0000 [bus 3f])
PCI host bridge to bus 0000:3f
pci0000:3f: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:0f:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0f:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x00f0-0x00ff]
pnp 00:01: [irq 13]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 4]
pnp 00:07: [io 0x03f8-0x03ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0050-0x0053]
pnp 00:0b: [io 0x0072-0x0077]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0400-0x041f]
pnp 00:0c: [io 0x0420-0x043f]
pnp 00:0c: [io 0x0440-0x045f]
pnp 00:0c: [io 0x0460-0x047f]
pnp 00:0c: [io 0x0480-0x048f]
pnp 00:0c: [io 0xf800-0xf81f]
pnp 00:0c: [io 0xf820-0xf83f]
pnp 00:0c: [io 0xf840-0xf85f]
pnp 00:0c: [io 0xf860-0xf87f]
pnp 00:0c: [io 0xfa00-0xfa3f]
pnp 00:0c: [io 0xfc00-0xfc7f]
pnp 00:0c: [io 0xfc80-0xfcff]
pnp 00:0c: [io 0xfe00-0xfe7f]
pnp 00:0c: [io 0xfe80-0xfeff]
pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io 0x004e-0x004f]
pnp 00:0d: [io 0x04d0-0x04d1]
pnp 00:0d: [io 0x4700-0x470b]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x00100000-0xdfffffff]
pnp 00:0f: [mem 0x000e8000-0x000fffff]
pnp 00:0f: [mem 0xfec01000-0xfecfffff]
pnp 00:0f: [mem 0xfed00000-0xfed3ffff]
pnp 00:0f: [mem 0xfed40000-0xffffffff]
pnp 00:0f: [mem 0xf0000000-0xf3ffffff]
pnp 00:0f: [mem 0x000dbc00-0x000e7fff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0x0480-0x048f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfc00-0xfc7f] has been reserved
system 00:0c: [io 0xfc80-0xfcff] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0d: [io 0x04d0-0x04d1] has been reserved
system 00:0d: [io 0x4700-0x470b] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0f: [mem 0x000e8000-0x000fffff] could not be reserved
system 00:0f: [mem 0xfec01000-0xfecfffff] could not be reserved
system 00:0f: [mem 0xfed00000-0xfed3ffff] could not be reserved
system 00:0f: [mem 0xfed40000-0xffffffff] could not be reserved
system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0f: [mem 0x000dbc00-0x000e7fff] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1f.0: BAR 13: [io 0xf800-0xf87f] has bogus alignment
pci 0000:00:1f.0: BAR 14: [io 0xfa00-0xfa3f] has bogus alignment
pci 0000:00:01.0: BAR 15: assigned [mem 0xeb100000-0xeb1fffff pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xeb200000-0xeb3fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xeb400000-0xeb5fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xeb600000-0xeb7fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xeb100000-0xeb11ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xeb120000-0xeb13ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xec0fffff]
pci 0000:00:01.0: bridge window [mem 0xeb100000-0xeb1fffff pref]
pci 0000:0f:00.0: BAR 6: assigned [mem 0xeb080000-0xeb0fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
pci 0000:00:03.0: PCI bridge to [bus 0f-0f]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xea000000-0xeb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 28-28]
pci 0000:00:07.0: PCI bridge to [bus 28-28]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
pci 0000:00:1c.0: PCI bridge to [bus 1c-1c]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xeb400000-0xeb5fffff]
pci 0000:00:1c.0: bridge window [mem 0xeb600000-0xeb7fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5: PCI bridge to [bus 01-01]
pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.5: bridge window [mem 0xed000000-0xed0fffff]
pci 0000:00:1c.5: bridge window [mem 0xeb200000-0xeb3fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 37-37]
pci 0000:00:1e.0: PCI bridge to [bus 37-37]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0xe0000000-0xeeffffff]
pci_bus 0000:00: resource 6 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 8 [io 0x0000-0x03af]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 10 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 11 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 12 [io 0x1000-0xefff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xec000000-0xec0fffff]
pci_bus 0000:03: resource 2 [mem 0xeb100000-0xeb1fffff pref]
pci_bus 0000:0f: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0f: resource 1 [mem 0xea000000-0xeb0fffff]
pci_bus 0000:0f: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:1c: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:1c: resource 1 [mem 0xeb400000-0xeb5fffff]
pci_bus 0000:1c: resource 2 [mem 0xeb600000-0xeb7fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xed000000-0xed0fffff]
pci_bus 0000:01: resource 2 [mem 0xeb200000-0xeb3fffff 64bit pref]
pci_bus 0000:37: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:37: resource 5 [mem 0xe0000000-0xeeffffff]
pci_bus 0000:37: resource 6 [mem 0xfed00000-0xfed003ff]
pci_bus 0000:37: resource 7 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:37: resource 8 [io 0x0000-0x03af]
pci_bus 0000:37: resource 9 [io 0x03b0-0x03df]
pci_bus 0000:37: resource 10 [io 0x03e0-0x0cf7]
pci_bus 0000:37: resource 11 [io 0x0d00-0x0fff]
pci_bus 0000:37: resource 12 [io 0x1000-0xefff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.2: PCI INT C disabled
pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:0f:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16711k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1406844704.423:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7618
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 970DD299E15A8A25
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 48 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 49 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xee004800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xee004c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000c040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000c0a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-431.23.3.el6.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-07-31 22:11:45 UTC (1406844705)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 796k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pmp pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xee004000 port 0xee004100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xee004000 port 0xee004180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xee004000 port 0xee004200 irq 50
ata4: SATA max UDMA/133 abar m2048@0xee004000 port 0xee004280 irq 50
ata5: SATA max UDMA/133 abar m2048@0xee004000 port 0xee004300 irq 50
ata6: SATA max UDMA/133 abar m2048@0xee004000 port 0xee004380 irq 50
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 7-1: new low speed USB device number 2 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3250410AS, 3.AHB, max UDMA/100
ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/100
ata1.00: ATAPI: hp DVD A DH16ABSH, YHDF, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM hp DVD A DH16ABSH YHDF PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3250410AS 3.AH PQ: 0 ANSI: 5
usb 7-1: New USB device found, idVendor=03f0, idProduct=0024
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: HP Basic USB Keyboard
usb 7-1: Manufacturer: CHICONY
usb 7-1: configuration #1 chosen from 1 choice
Refined TSC clocksource calibration: 2666.666 MHz.
Switching to clocksource tsc
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-1/input0
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
usb 7-2: new low speed USB device number 3 using uhci_hcd
usb 7-2: New USB device found, idVendor=046d, idProduct=c018
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Logitech USB Optical Mouse
usb 7-2: Manufacturer: Logitech
usb 7-2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
generic-usb 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda3
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1406844706.927:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Jul 29 2014
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC262: SKU not ready 0x411111f0
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:0f:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
hda_intel: Disabling MSI
hda-intel 0000:0f:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:0f:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:0f:00.1/sound/card1/input13
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.132 (May 21, 2013)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
tg3 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:01:00.0: setting latency timer to 64
tg3 0000:01:00.0: eth0: Tigon3 [partno(BCM95754) rev 5784100] (PCI Express) MAC address 78:e7:d1:c6:0b:56
tg3 0000:01:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
e1000e 0000:03:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
e1000e 0000:03:00.0: setting latency timer to 64
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
e1000e 0000:03:00.0: irq 52 for MSI/MSI-X
e1000e 0000:03:00.0: eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:00:0f:68
e1000e 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0: eth1: MAC: 0, PHY: 4, PBA No: D28207-002
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
e1000e 0000:03:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
e1000e 0000:03:00.1: setting latency timer to 64
e1000e 0000:03:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
e1000e 0000:03:00.1: irq 53 for MSI/MSI-X
e1000e 0000:03:00.1: eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:00:0f:69
e1000e 0000:03:00.1: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.1: eth2: MAC: 0, PHY: 4, PBA No: D28207-002
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
nvidia 0000:0f:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nvidia 0000:0f:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:0f:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.67 Fri Apr 4 13:48:39 PDT 2014
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: WMI: Mapper loaded
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
udev: renamed network interface eth0 to rename2
udev: renamed network interface eth1 to rename3
udev: renamed network interface eth2 to rename4
udev: renamed network interface rename3 to eth0
udev: renamed network interface rename4 to eth1
udev: renamed network interface rename2 to eth2
microcode: CPU0 updated to revision 0x19, date = 2013-06-21
microcode: CPU1 updated to revision 0x19, date = 2013-06-21
microcode: CPU2 updated to revision 0x19, date = 2013-06-21
microcode: CPU3 updated to revision 0x19, date = 2013-06-21
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
Adding 4194296k swap on /dev/sda5. Priority:-1 extents:1 across:4194296k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
tg3 0000:01:00.0: irq 54 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth2: link is not ready
tg3 0000:01:00.0: eth2: Link is up at 1000 Mbps, full duplex
tg3 0000:01:00.0: eth2: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
e1000e 0000:03:00.0: irq 52 for MSI/MSI-X
e1000e 0000:03:00.0: irq 52 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
8021q: adding VLAN 0 to HW filter on device eth0
e1000e 0000:03:00.1: irq 53 for MSI/MSI-X
e1000e 0000:03:00.1: irq 53 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
lo: Disabled Privacy Extensions
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
nvidia 0000:0f:00.0: irq 55 for MSI/MSI-X
eth2: no IPv6 routers present
hda-codec: out of range cmd 3:5:707:fffffffc
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.