dmesg - FIRST
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ce1e3fff] usable
BIOS-e820: [mem 0x00000000ce1e4000-0x00000000dcd3efff] reserved
BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
BIOS-e820: [mem 0x00000000dceff000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000031e5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20AQ0069GE/20AQ0069GE, BIOS GJET74WW (2.24 ) 03/19/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x31e600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00DE000000 mask 7FFE000000 uncachable
2 base 00DD000000 mask 7FFF000000 uncachable
3 base 00DCF00000 mask 7FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xce1e4 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x31e400000-0x31e5fffff]
[mem 0x31e400000-0x31e5fffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x31c000000-0x31e3fffff]
[mem 0x31c000000-0x31e3fffff] page 2M
init_memory_mapping: [mem 0x300000000-0x31bffffff]
[mem 0x300000000-0x31bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xce1e3fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcdffffff] page 2M
[mem 0xce000000-0xce1e3fff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
RAMDISK: [mem 0x34b6a000-0x365acfff]
ACPI: RSDP 00000000000f0120 000024 (v02 LENOVO)
ACPI: XSDT 00000000dcefe170 0000F4 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: FACP 00000000dcef8000 00010C (v05 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 00000000dcee2000 010E74 (v01 LENOVO TP-GJ 00002240 INTL 20120711)
ACPI: FACS 00000000dce4a000 000040
ACPI: SLIC 00000000dcefd000 000176 (v01 LENOVO TP-GJ 00002240 PTEC 00000001)
ACPI: DBGP 00000000dcefb000 000034 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: ECDT 00000000dcefa000 000052 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: HPET 00000000dcef7000 000038 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: APIC 00000000dcef6000 000098 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: MCFG 00000000dcef5000 00003C (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: SSDT 00000000dcef4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 00000000dcef3000 00044F (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 00000000dcee1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 00000000dcee0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
ACPI: SSDT 00000000dcedf000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000dcede000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
ACPI: SSDT 00000000dcedc000 001215 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 00000000dcedb000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 00000000dceda000 00006E (v05 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: SSDT 00000000dced9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: TCPA 00000000dced8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: UEFI 00000000dced7000 000042 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: MSDM 00000000dcdb2000 000055 (v03 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: ASF! 00000000dcefc000 0000A5 (v32 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: BATB 00000000dced6000 000046 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: FPDT 00000000dced5000 000064 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: UEFI 00000000dced4000 0002E2 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: SSDT 00000000dced3000 00047F (v01 LENOVO IsctTabl 00001000 INTL 20120711)
ACPI: DMAR 00000000dced2000 0000B0 (v01 LENOVO TP-GJ 00002240 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000031e5fffff]
Initmem setup node 0 [mem 0x00000000-0x31e5fffff]
NODE_DATA [mem 0x31e5f9000-0x31e5fdfff]
[ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312000000-ffff88031dbfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x31e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xce1e3fff]
node 0: [mem 0x100000000-0x31e5fffff]
On node 0 totalpages: 3065728
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13128 pages used for memmap
DMA32 zone: 840164 pages, LIFO batch:31
Normal zone: 34712 pages used for memmap
Normal zone: 2221568 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xce1e4000-0xdcd3efff]
PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
PM: Registered nosave memory: [mem 0xdceff000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88031e200000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3017803
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 11959884K/12262912K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 303028K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1016 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 49283072 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2693.885 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.77 BogoMIPS (lpj=10775540)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000dae9c000 end: 0x000000daeb2fff
dmar: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21551.08 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 10:00:24, date: 07/31/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dccd7918 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000dcd2e618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000dcd2fc18 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: Power Resource [PUBS] (on)
ACPI: Power Resource [NVP3] (on)
ACPI: Power Resource [NVP2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xce1e4000-0xcfffffff]
e820: reserve RAM buffer [mem 0x31e600000-0x31fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26892K (ffff880034b6a000 - ffff8800365ad000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xca1e4000-0xce1e4000] (64MB) mapped at [ffff8800ca1e4000-ffff8800ce1e3fff]
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1406800825.496:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 23411
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
tsc: Refined TSC clocksource calibration: 2693.764 MHz
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (32 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
tpm_tis 00:09: TPM is disabled/deactivated (0x6)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:357:23
memory memory63: hash matches
rtc_cmos 00:06: setting system clock to 2014-07-31 10:00:27 UTC (1406800827)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[124]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
rtsx_pci 0000:02:00.0: irq 59 for MSI/MSI-X
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 59
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 60
ata2: DUMMY
ata3: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:5b:54:5d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 62 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L9, DXT02L5Q, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD256 DXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbcon: inteldrmfb (fb0) is primary device
usb 2-4: new high-speed USB device number 2 using xhci_hcd
usb 2-4: New USB device found, idVendor=0bdb, idProduct=193e
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: N5321 gw
usb 2-4: Manufacturer: Lenovo
usb 2-4: SerialNumber: 33AF74907C8865M0
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00, board id: 2668, fw id: 1545510
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 2-6: new full-speed USB device number 3 using xhci_hcd
usb 2-6: New USB device found, idVendor=138a, idProduct=0017
usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 2-6: SerialNumber: 636180238c32
Switched to clocksource tsc
usb 2-7: new full-speed USB device number 4 using xhci_hcd
usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-8: new high-speed USB device number 5 using xhci_hcd
usb 2-8: New USB device found, idVendor=04f2, idProduct=b39a
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: SunplusIT INC.
usb 1-1.5: new full-speed USB device number 3 using ehci-pci
usb 1-1.5: No LPM exit latency info found. Power management will be impacted.
usb 1-1.5: New USB device found, idVendor=058f, idProduct=9540
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: EMV Smartcard Reader
usb 1-1.5: Manufacturer: Generic
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi device:01: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 11 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 12261372k swap on /dev/sda5. Priority:-1 extents:1 across:12261372k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[337]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:03:00.0: irq 64 for MSI/MSI-X
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 66 for MSI/MSI-X
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
iwlwifi 0000:03:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
type=1400 audit(1406800830.816:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
type=1400 audit(1406800830.816:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1406800830.816:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1406800830.820:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1406800830.820:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1406800830.820:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS GJET74WW (2.24 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQ0069GE
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
cdc_wdm 2-4:1.8: cdc-wdm1: USB WDM device
usbcore: registered new interface driver cdc_wdm
cdc_acm 2-4:1.1: ttyACM0: USB ACM device
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
cdc_acm 2-4:1.3: ttyACM1: USB ACM device
thinkpad_acpi: Unsupported brightness interface, please contact [email protected]
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
cdc_acm 2-4:1.9: ttyACM2: USB ACM device
SKU: Nid=0x1d sku_cfg=0x40738105
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000003
SKU: customization=0x00000081
SKU: external_amp=0x0
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x1a
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x40738105 for NID 0x1d
realtek: Enabling init ASM_ID=0x8105 CODEC_ID=10ec0292
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
usbcore: registered new interface driver cdc_ncm
cdc_mbim 2-4:1.6: cdc-wdm2: USB WDM device
cdc_mbim 2-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, ca:48:5b:1c:5b:69
usbcore: registered new interface driver cdc_mbim
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
intel_rapl: domain uncore energy ctr 55838:55838 not working, skip
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
type=1400 audit(1406800831.220:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=654 comm="apparmor_parser"
type=1400 audit(1406800831.220:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=654 comm="apparmor_parser"
type=1400 audit(1406800831.224:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=654 comm="apparmor_parser"
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: cups main process (656) killed by HUP signal
init: cups main process ended, respawning
init: failsafe main process (683) killed by TERM signal
type=1400 audit(1406800831.608:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=842 comm="apparmor_parser"
type=1400 audit(1406800831.608:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
type=1400 audit(1406800831.608:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
type=1400 audit(1406800831.608:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
type=1400 audit(1406800831.608:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
type=1400 audit(1406800831.608:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
type=1400 audit(1406800831.612:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=844 comm="apparmor_parser"
type=1400 audit(1406800831.612:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=844 comm="apparmor_parser"
type=1400 audit(1406800831.612:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=844 comm="apparmor_parser"
type=1400 audit(1406800831.612:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=844 comm="apparmor_parser"
vmmon: module verification failed: signature and/or required key missing - tainting kernel
/dev/vmmon[1068]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1068]: Module vmmon: initialized
e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 40
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1265) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
/dev/vmnet: open called by PID 1297 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1299 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1310 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1311 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1314 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
init: anacron main process (992) killed by TERM signal
NET: Unregistered protocol family 40
/dev/vmmon[1723]: Module vmmon: unloaded
cdc_wdm 2-4:1.8: wdm_int_callback - 0 bytes
cdc_wdm 2-4:1.5: wdm_int_callback - 0 bytes
wlan0: authenticate with bc:05:43:bf:be:e9
wlan0: send auth to bc:05:43:bf:be:e9 (try 1/3)
wlan0: authenticated
wlan0: associate with bc:05:43:bf:be:e9 (try 1/3)
wlan0: RX AssocResp from bc:05:43:bf:be:e9 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan0: authenticate with bc:05:43:bf:be:ed
wlan0: send auth to bc:05:43:bf:be:ed (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with bc:05:43:bf:be:ed (try 1/3)
wlan0: RX AssocResp from bc:05:43:bf:be:ed (capab=0x431 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
/dev/vmmon[2662]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2662]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=56)
Initialized host personality
NET: Registered protocol family 40
/dev/vmnet: open called by PID 2744 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
bridge-wlan0: attached
/dev/vmnet: open called by PID 2752 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2754 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2765 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 2766 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2768 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
deprecated_sysctl_warning: 84 callbacks suppressed
warning: process `vmware-hostd' used the deprecated sysctl system call with 1.1.
init: plymouth-stop pre-start process (3157) terminated with status 1
type=1400 audit(1406800861.293:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3264 comm="apparmor_parser"
type=1400 audit(1406800861.293:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3264 comm="apparmor_parser"
type=1400 audit(1406800861.293:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3264 comm="apparmor_parser"
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with bc:05:43:bf:be:e9
wlan0: send auth to bc:05:43:bf:be:e9 (try 1/3)
wlan0: authenticated
wlan0: associate with bc:05:43:bf:be:e9 (try 1/3)
wlan0: RX AssocResp from bc:05:43:bf:be:e9 (capab=0x411 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
/dev/vmnet: open called by PID 2744 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: device is wireless, enabling SMAC
bridge-wlan0: up
bridge-wlan0: attached
userif-3: sent link down event.
userif-3: sent link up event.
wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by bc:05:43:bf:be:e9