dmesg - CDH
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bbfa5fff] usable
BIOS-e820: [mem 0x00000000bbfa6000-0x00000000bc41ffff] reserved
BIOS-e820: [mem 0x00000000bc420000-0x00000000bc52dfff] ACPI data
BIOS-e820: [mem 0x00000000bc52e000-0x00000000bc760fff] ACPI NVS
BIOS-e820: [mem 0x00000000bc761000-0x00000000bd716fff] reserved
BIOS-e820: [mem 0x00000000bd717000-0x00000000bd717fff] usable
BIOS-e820: [mem 0x00000000bd718000-0x00000000bd79dfff] ACPI NVS
BIOS-e820: [mem 0x00000000bd79e000-0x00000000bdbddfff] usable
BIOS-e820: [mem 0x00000000bdbde000-0x00000000bdff3fff] reserved
BIOS-e820: [mem 0x00000000bdff4000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/SABERTOOTH X79, BIOS 4502 10/15/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFC00000000 write-back
1 base 000400000000 mask 3FFFC0000000 write-back
2 base 0000BF000000 mask 3FFFFF000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3056MB, range: 16MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 1GB, type WB
e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8c0-0x000fd8cf] mapped at [ffff8800000fd8c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[mem 0x43c000000-0x43fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbbfa5fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbbdfffff] page 2M
[mem 0xbbe00000-0xbbfa5fff] page 4k
init_memory_mapping: [mem 0xbd717000-0xbd717fff]
[mem 0xbd717000-0xbd717fff] page 4k
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0xbd79e000-0xbdbddfff]
[mem 0xbd79e000-0xbd7fffff] page 4k
[mem 0xbd800000-0xbd9fffff] page 2M
[mem 0xbda00000-0xbdbddfff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xbdff4000-0xbdffffff]
[mem 0xbdff4000-0xbdffffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000bc456070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bc460238 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bc456168 00A0C9 (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 00000000bc758080 000040
ACPI: APIC 00000000bc460348 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bc460448 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bc460490 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000bc4604d0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: BGRT 00000000bc52d688 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bc460560 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43fff9000-0x43fffdfff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbbfa5fff]
node 0: [mem 0xbd717000-0xbd717fff]
node 0: [mem 0xbd79e000-0xbdbddfff]
node 0: [mem 0xbdff4000-0xbdffffff]
node 0: [mem 0x100000000-0x43fffffff]
On node 0 totalpages: 4178832
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11984 pages used for memmap
DMA32 zone: 766963 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbbfa6000-0xbc41ffff]
PM: Registered nosave memory: [mem 0xbc420000-0xbc52dfff]
PM: Registered nosave memory: [mem 0xbc52e000-0xbc760fff]
PM: Registered nosave memory: [mem 0xbc761000-0xbd716fff]
PM: Registered nosave memory: [mem 0xbd718000-0xbd79dfff]
PM: Registered nosave memory: [mem 0xbdbde000-0xbdff3fff]
PM: Registered nosave memory: [mem 0xbe000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbe000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113515
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16350512K/16715328K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 364816K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
NR_IRQS:16640 nr_irqs:1184 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3602.238 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7204.47 BogoMIPS (lpj=14408952)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 23 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4960X CPU @ 3.60GHz (fam: 06, model: 3e, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (86453.71 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbc52e000-0xbc760fff] (2306048 bytes)
PM: Registering ACPI NVS region [mem 0xbd718000-0xbd79dfff] (548864 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:31:00, date: 07/28/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb52a000-0xfb52afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb529000-0xfb52900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb500000-0xfb51ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb528000-0xfb528fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb527000-0xfb5273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb520000-0xfb523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb526000-0xfb5263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb525000-0xfb5257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb524000-0xfb5240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 06]
pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xfb100000-0xfb13ffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 01-04]
pci 0000:00:02.0: bridge window [io 0xd000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfb1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xf8000000-0xfb0fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:03:00.0: [10de:1188] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xe000-0xefff]
pci 0000:02:08.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:02:08.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:04:00.0: [10de:1188] type 00 class 0x030200
pci 0000:04:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xc0000000-0xc7ffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:04:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xf9000000-0xf9003fff]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:10.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:02:10.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 09]
pci 0000:00:1c.1: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0a:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xfb300000-0xfb307fff 64bit]
pci 0000:0a:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 0a]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0b:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:0b:00.0: reg 0x10: [mem 0xfb200000-0xfb207fff 64bit]
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 0b]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbbfa6000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd718000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdbde000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0400-0x0453] could not be reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 06]
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0: bridge window [io 0xe000-0xefff]
pci 0000:02:08.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:02:08.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:10.0: PCI bridge to [bus 04]
pci 0000:02:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:10.0: bridge window [mem 0xf8000000-0xf90fffff]
pci 0000:02:10.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xf8000000-0xfb0fffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01-04]
pci 0000:00:02.0: bridge window [io 0xd000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfb1fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.1: PCI bridge to [bus 09]
pci 0000:00:1c.1: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.2: PCI bridge to [bus 0a]
pci 0000:00:1c.2: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.3: PCI bridge to [bus 0b]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb1fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf90fffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0a: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0b: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb7fa6000-0xbbfa6000] (64MB) mapped at [ffff8800b7fa6000-ffff8800bbfa5fff]
microcode: CPU0 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU1 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU2 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU3 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU4 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU5 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU6 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU7 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU8 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU9 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU10 sig=0x306e4, pf=0x4, revision=0x416
microcode: CPU11 sig=0x306e4, pf=0x4, revision=0x416
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1406536259.628:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31970
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:01:00.0: irq 64 for MSI/MSI-X
pcieport 0000:02:08.0: irq 65 for MSI/MSI-X
pcieport 0000:02:10.0: irq 66 for MSI/MSI-X
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd9000000, mapped to 0xffffc90011c80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb527000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb526000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 74 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:09:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:09:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0a:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 82 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb5: SerialNumber: 0000:0a:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb6: SerialNumber: 0000:0a:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:0b:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 84 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 85 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 86 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 87 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 88 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 89 for MSI/MSI-X
xhci_hcd 0000:0b:00.0: irq 90 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb7: SerialNumber: 0000:0b:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 8
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb8: SerialNumber: 0000:0b:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:435:524
rtc_cmos 00:03: setting system clock to 2014-07-28 08:31:00 UTC (1406536260)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[170]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 91 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb525000 port 0xfb525100 irq 91
ata2: SATA max UDMA/133 abar m2048@0xfb525000 port 0xfb525180 irq 91
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 92 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:24:79:c4
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Crucial_CT960M500SSD1, MU05, max UDMA/133
ata2.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Crucial_CT960M50 MU05 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 34 bits of entropy available
init: plymouth-upstart-bridge main process (256) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (266) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (271) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (280) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 16713724k swap on /dev/sda5. Priority:-1 extents:1 across:16713724k SSFS
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[382]: starting version 204
wmi: Mapper loaded
mei_me 0000:00:16.0: irq 93 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 1c.0 PCI ID 8086:0e60
EDAC sbridge: Seeking for: dev 1d.2 PCI ID 8086:0e6a
EDAC sbridge: Seeking for: dev 1d.3 PCI ID 8086:0e6b
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:0eb8
EDAC sbridge: Seeking for: dev 11.4 PCI ID 8086:0ebc
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
MXM: GUID detected in BIOS
checking generic (d9000000 130000) vs hw (d0000000 8000000)
checking generic (d9000000 130000) vs hw (d8000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:03:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... signature not found
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Disabling ACPI video driver
tsc: Refined TSC clocksource calibration: 3602.243 MHz
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.04.1e.00.0e
nouveau 0000:03:00.0: irq 94 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
systemd-udevd[404]: renamed network interface eth0 to eth3
nouveau [ VOLT][0000:03:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:03:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 8186010 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 04832fb6 0f420010
nouveau [ DRM] DCB outp 04: 04032f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 01000131
nouveau [ DRM] DCB conn 02: 00020246
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
lp: driver loaded but no devices found
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
nouveau [ DRM] MM: using COPY for buffer copies
ppdev: user-space parallel port driver
type=1400 audit(1406536261.278:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=523 comm="apparmor_parser"
type=1400 audit(1406536261.278:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
type=1400 audit(1406536261.278:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser"
type=1400 audit(1406536261.278:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=522 comm="apparmor_parser"
type=1400 audit(1406536261.278:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
type=1400 audit(1406536261.278:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser"
type=1400 audit(1406536261.278:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
type=1400 audit(1406536261.278:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser"
type=1400 audit(1406536261.278:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 95 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Receiver
usb 2-1.5: Manufacturer: Logitech
nouveau [ DRM] allocated 2560x1440 fb: 0x80000, bo ffff880429343400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
hda_intel: Disabling MSI
hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:03:00.1: Disabling 64bit DMA
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0e4080a2
nouveau [ DEVICE][0000:04:00.0] Chipset: GK104 (NVE4)
nouveau [ DEVICE][0000:04:00.0] Family : NVE0
nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
hda-intel 0000:03:00.1: Enable delay in RIRB handling
nouveau [ VBIOS][0000:04:00.0] ... signature not found
nouveau [ VBIOS][0000:04:00.0] checking PROM for image...
hidraw: raw HID events driver (C) Jiri Kosina
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input2
input: Logitech Unifying Device. Wireless PID:2007 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input14
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2007] on usb-0000:00:1d.0-1.5:1
input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input15
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:1d.0-1.5:2
init: failsafe main process (713) killed by TERM signal
random: nonblocking pool is initialized
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
nouveau [ VBIOS][0000:04:00.0] using image from PROM
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 80.04.1e.00.0f
nouveau [ DEVINIT][0000:04:00.0] adaptor not initialised
nouveau [ VBIOS][0000:04:00.0] running init tables
e1000e 0000:00:19.0: irq 92 for MSI/MSI-X
e1000e 0000:00:19.0: irq 92 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
nouveau 0000:04:00.0: irq 96 for MSI/MSI-X
nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
nouveau [ PFB][0000:04:00.0] RAM type: GDDR5
nouveau [ PFB][0000:04:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:04:00.0] GPU voltage: 987500uv
nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
nouveau [ PTHERM][0000:04:00.0] fan management: automatic
nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
nouveau [ CLK][0000:04:00.0] 07: core 324 MHz memory 324 MHz
nouveau [ CLK][0000:04:00.0] 0a: core 324-862 MHz memory 810 MHz
nouveau [ CLK][0000:04:00.0] 0d: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] 0f: core 540-1202 MHz memory 3004 MHz
nouveau [ CLK][0000:04:00.0] --: core 324 MHz memory 324 MHz
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input16
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000f00 00000000
nouveau [ DRM] DCB outp 01: 01020f02 00020030
nouveau [ DRM] DCB conn 00: 00001030
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.1.1 20120801 for 0000:04:00.0 on minor 1
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Disabling 64bit DMA
hda-intel 0000:04:00.1: Enable delay in RIRB handling
Switched to clocksource tsc
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:10.0/0000:04:00.1/sound/card2/input19
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1210) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -22
show_signal_msg: 129 callbacks suppressed
conftest[1747]: segfault at 0 ip 00000000004005c0 sp 00007fff0dfd21f0 error 4 in conftest[400000+1000]
conftest[1810]: segfault at 0 ip 00007f68e5e960a6 sp 00007fffadcc8158 error 4 in libc-2.19.so[7f68e5d55000+1bc000]
conftest[23545]: segfault at 0 ip 00000000004005c0 sp 00007fff55d89f00 error 4 in conftest[400000+1000]
conftest[23574]: segfault at 0 ip 00007f53e82450a6 sp 00007fffc6cb64f8 error 4 in libc-2.19.so[7f53e8104000+1bc000]