dmesg - apache
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-123.4.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Mon Jun 30 16:09:14 UTC 2014
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.4.2.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/swap rd.lvm.lv=centos/root vconsole.font=latarcyrheb-sun16 vconsole.keymap=de rhgb quiet LANG=de_DE.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7faffff] usable
BIOS-e820: [mem 0x00000000c7fb0000-0x00000000c7fbdfff] ACPI data
BIOS-e820: [mem 0x00000000c7fbe000-0x00000000c7fdffff] ACPI NVS
BIOS-e820: [mem 0x00000000c7fe0000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: BIOSTAR Group TA890FXE/TA890FXE, BIOS 080015 10/11/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x438000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF8000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000438000000 aka 17280M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc7fb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01e1d000, 0x01e1dfff] PGTABLE
BRK [0x01e1e000, 0x01e1efff] PGTABLE
BRK [0x01e1f000, 0x01e1ffff] PGTABLE
init_memory_mapping: [mem 0x437e00000-0x437ffffff]
[mem 0x437e00000-0x437ffffff] page 2M
BRK [0x01e20000, 0x01e20fff] PGTABLE
init_memory_mapping: [mem 0x434000000-0x437dfffff]
[mem 0x434000000-0x437dfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x433ffffff]
[mem 0x400000000-0x433ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc7faffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc7dfffff] page 2M
[mem 0xc7e00000-0xc7faffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x3601b000-0x37005fff]
ACPI: RSDP 00000000000fb380 00024 (v02 ACPIAM)
ACPI: XSDT 00000000c7fb0100 00064 (v01 101110 XSDT1749 20101011 MSFT 00000097)
ACPI: FACP 00000000c7fb0290 000F4 (v04 101110 FACP1749 20101011 MSFT 00000097)
ACPI: DSDT 00000000c7fb0450 04C0B (v02 89FAD 89FADA11 00000001 INTL 20051117)
ACPI: FACS 00000000c7fbe000 00040
ACPI: APIC 00000000c7fb0390 0007C (v02 101110 APIC1749 20101011 MSFT 00000097)
ACPI: MCFG 00000000c7fb0410 0003C (v01 101110 OEMMCFG 20101011 MSFT 00000097)
ACPI: OEMB 00000000c7fbe040 00072 (v01 101110 OEMB1749 20101011 MSFT 00000097)
ACPI: SRAT 00000000c7fba450 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000c7fba560 00038 (v01 101110 OEMHPET 20101011 MSFT 00000097)
ACPI: IVRS 00000000c7fba5a0 000C8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: SSDT 00000000c7fba670 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x437ffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x437ffffff] -> [mem 0x00000000-0x437ffffff]
Initmem setup node 0 [mem 0x00000000-0x437ffffff]
NODE_DATA [mem 0x437fd7000-0x437ffdfff]
[ffffea0000000000-ffffea0010dfffff] PMD -> [ffff880427600000-ffff8804375fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x437ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009afff]
node 0: [mem 0x00100000-0xc7faffff]
node 0: [mem 0x100000000-0x437ffffff]
On node 0 totalpages: 4194122
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 12735 pages used for memmap
DMA32 zone: 815024 pages, LIFO batch:31
Normal zone: 52736 pages used for memmap
Normal zone: 3375104 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
PM: Registered nosave memory: [mem 0xc7fb0000-0xc7fbdfff]
PM: Registered nosave memory: [mem 0xc7fbe000-0xc7fdffff]
PM: Registered nosave memory: [mem 0xc7fe0000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc8000000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880437c00000 s86656 r8192 d23936 u262144
pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128566
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-123.4.2.el7.x86_64 root=/dev/mapper/centos-root ro rd.lvm.lv=centos/swap rd.lvm.lv=centos/root vconsole.font=latarcyrheb-sun16 vconsole.keymap=de rhgb quiet LANG=de_DE.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ bc000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ bc000000
PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
Memory: 16350780k/17694720k available (6106k kernel code, 918232k absent, 425708k reserved, 4064k data, 1584k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=6.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-5.
NR_IRQS:327936 nr_irqs:728 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3599.890 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.78 BogoMIPS (lpj=3599890)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 23385 entries in 92 pages
[Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
AMD-Vi: Disabling interrupt remapping
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (fam: 10, model: 0a, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
process: Switch to broadcast mode on CPU3
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK
process: Switch to broadcast mode on CPU4
Brought up 6 CPUs
smpboot: Total of 6 processors activated (43198.68 BogoMIPS)
process: Switch to broadcast mode on CPU5
process: Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc7fbe000-0xc7fdffff] (139264 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c8000000, dfffffff]
TOM2: 0000000438000000 aka 17280M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc8000000-0xdfffffff]
bus: 00 [mem 0x438000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe6f3000-0xfe6f3fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:67b0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xcf800000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfe780000-0xfe7bffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfe7c0000-0xfe7dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe7fc000-0xfe7fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:02.0: bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [8086:1528] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfd800000-0xfd9fffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: [8086:1528] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xfdc00000-0xfddfffff 64bit pref]
pci 0000:02:00.1: reg 0x20: [mem 0xfdbfc000-0xfdbfffff 64bit pref]
pci 0000:02:00.1: reg 0x30: [mem 0xfe880000-0xfe8fffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot
pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0b.0: bridge window [mem 0xfd800000-0xfddfffff 64bit pref]
pci 0000:03:05.0: [1822:4e35] type 00 class 0x048000
pci 0000:03:05.0: reg 0x10: [mem 0xfdeff000-0xfdefffff pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7fb0000-0xc7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xf6000000-0xf6003fff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] could not be reserved
system 00:08: [io 0x0b00-0x0b1f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x0a00-0x0a0f] has been reserved
system 00:09: [io 0x0a10-0x0a1f] has been reserved
system 00:09: [io 0x0a20-0x0a2f] has been reserved
system 00:09: [io 0x0a30-0x0a3f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:02:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:02:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:02:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:02:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000c0000-0x000cffff disabled] because it overlaps 0000:02:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:02:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:02:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000c0000-0x000cffff disabled] because it overlaps 0000:02:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:02:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:02:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000c0000-0x000cffff disabled] because it overlaps 0000:02:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit]
pnp 00:0b: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:02:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit]
system 00:0b: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:02.0: bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: BAR 7: can't assign mem (size 0x100000)
pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.0: BAR 10: can't assign mem (size 0x100000)
pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: BAR 7: can't assign mem (size 0x100000)
pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:02:00.1: BAR 10: can't assign mem (size 0x100000)
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0b.0: bridge window [mem 0xfd800000-0xfddfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xcf800000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfddfffff 64bit pref]
pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xc8000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16300k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc3fb0000-0xc7fb0000] (64MB) mapped at [ffff8800c3fb0000-ffff8800c7faffff]
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000bf
microcode: CPU1: patch_level=0x010000bf
microcode: CPU2: patch_level=0x010000bf
microcode: CPU3: patch_level=0x010000bf
microcode: CPU4: patch_level=0x010000bf
microcode: CPU5: patch_level=0x010000bf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1405784840.552:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31967
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (44 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f3000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.10.0-123.4.2.el7.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 3ad8a9a551d86b925d6ffee85e9c557deba15282'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2014-07-19 15:47:21 UTC (1405784841)
Freeing unused kernel memory: 1584k freed
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Expecting device dev-mapper-centos\x2droot.device...
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[122]: Vacuuming done, freed 0 bytes
usb 1-1: new high-speed USB device number 2 using ehci-pci
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
systemd-udevd[279]: starting version 208
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ACPI: bus type ATA registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 41 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90001826000, 00:30:67:6a:29:41, XID 081000c0 IRQ 41
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k
ixgbe: Copyright (c) 1999-2013 Intel Corporation.
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 19
usb 1-1: New USB device found, idVendor=0409, idProduct=005a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
systemd-udevd[284]: renamed network interface eth0 to enp4s0
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 1-3: New USB device found, idVendor=05e3, idProduct=0606
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ixgbe 0000:02:00.0: irq 42 for MSI/MSI-X
ixgbe 0000:02:00.0: irq 43 for MSI/MSI-X
ixgbe 0000:02:00.0: irq 44 for MSI/MSI-X
ixgbe 0000:02:00.0: irq 45 for MSI/MSI-X
ixgbe 0000:02:00.0: irq 46 for MSI/MSI-X
ixgbe 0000:02:00.0: irq 47 for MSI/MSI-X
ixgbe 0000:02:00.0: irq 48 for MSI/MSI-X
ixgbe 0000:02:00.0: Multiqueue Enabled: Rx Queue count = 6, Tx Queue count = 6
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
ixgbe 0000:02:00.0: (PCI Express:5.0GT/s:Width x8) d8:9d:67:ee:89:c4
tsc: Refined TSC clocksource calibration: 3600.081 MHz
Switching to clocksource tsc
ixgbe 0000:02:00.0: MAC: 3, PHY: 3, PBA No: G88062-004
ixgbe 0000:02:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:02:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:02:00.0: Intel(R) 10 Gigabit Network Connection
usb 5-2: new full-speed USB device number 2 using ohci-pci
usb 5-2: New USB device found, idVendor=24ae, idProduct=1000
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Rapoo 2.4G Wireless Touch Desktop
usb 5-2: Manufacturer: MOSART Semi.
input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input2
hid-generic 0003:24AE:1000.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-0000:00:13.0-2/input0
input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input3
hid-generic 0003:24AE:1000.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-0000:00:13.0-2/input1
usb 1-1.2: new low-speed USB device number 5 using ehci-pci
ixgbe 0000:02:00.1: irq 49 for MSI/MSI-X
ixgbe 0000:02:00.1: irq 50 for MSI/MSI-X
ixgbe 0000:02:00.1: irq 51 for MSI/MSI-X
ixgbe 0000:02:00.1: irq 52 for MSI/MSI-X
ixgbe 0000:02:00.1: irq 53 for MSI/MSI-X
ixgbe 0000:02:00.1: irq 54 for MSI/MSI-X
ixgbe 0000:02:00.1: irq 55 for MSI/MSI-X
ixgbe 0000:02:00.1: Multiqueue Enabled: Rx Queue count = 6, Tx Queue count = 6
ixgbe 0000:02:00.1: (PCI Express:5.0GT/s:Width x8) d8:9d:67:ee:89:c5
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c069
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Laser Mouse
usb 1-1.2: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
hid-generic 0003:046D:C069.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.2/input0
usb 1-1.4: new low-speed USB device number 6 using ehci-pci
ixgbe 0000:02:00.1: MAC: 3, PHY: 3, PBA No: G88062-004
ixgbe 0000:02:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:02:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
usb 1-1.4: New USB device found, idVendor=0557, idProduct=2212
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: CS1642 V1.0.07ر
usb 1-1.4: Manufacturer: ATEN
input: ATEN CS1642 V1.0.07ر as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0/input/input5
hid-generic 0003:0557:2212.0004: input,hidraw3: USB HID v1.00 Keyboard [ATEN CS1642 V1.0.07ر] on usb-0000:00:12.2-1.4/input0
input: ATEN CS1642 V1.0.07ر as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.1/input/input6
hid-generic 0003:0557:2212.0005: input,hidraw4: USB HID v1.00 Mouse [ATEN CS1642 V1.0.07ر] on usb-0000:00:12.2-1.4/input1
ixgbe 0000:02:00.1: Intel(R) 10 Gigabit Network Connection
systemd-udevd[283]: renamed network interface eth1 to enp2s0f1
systemd-udevd[281]: renamed network interface eth0 to enp2s0f0
bio: create slab at 1
usb 1-3.2: new high-speed USB device number 7 using ehci-pci
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
XFS (dm-1): Mounting Filesystem
XFS (dm-1): Ending clean mount
usb 1-3.2: New USB device found, idVendor=045e, idProduct=0729
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: Product: Microsoft® LifeCam Show(TM)
usb 1-3.2: Manufacturer: Microsoft
input: Microsoft Microsoft® LifeCam Show(TM) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.2/1-3.2:1.4/input/input7
hid-generic 0003:045E:0729.0006: input,hidraw5: USB HID v1.10 Device [Microsoft Microsoft® LifeCam Show(TM)] on usb-0000:00:12.2-3.2/input4
usb 4-5: new full-speed USB device number 2 using ohci-pci
systemd-journald[122]: Received SIGTERM
systemd-cgroups-agent[516]: Failed to get D-Bus connection: Failed to connect to socket /run/systemd/private: No such file or directory
type=1404 audit(1405784843.803:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 100030 rules.
SELinux: 2048 avtab hash slots, 100030 rules.
SELinux: 8 users, 86 roles, 4808 types, 281 bools, 1 sens, 1024 cats
SELinux: 83 classes, 100030 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev dm-1, type xfs), uses xattr
type=1403 audit(1405784843.967:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 168.211ms.
systemd[1]: Relabelled /dev and /run in 27.358ms.
usb 4-5: New USB device found, idVendor=0a12, idProduct=0001
usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
systemd-journald[560]: Vacuuming done, freed 0 bytes
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
systemd-udevd[597]: starting version 208
acpi-cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x41
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90011b0ab00). heartbeat=60 sec (nowayout=0)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Microsoft® LifeCam Show(TM) (045e:0729)
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 56 for MSI/MSI-X
input: Microsoft® LifeCam Show(TM) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.2/1-3.2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: PC Speaker as /devices/platform/pcspkr/input/input9
DVB: registering new adapter (Mantis DVB adapter)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
fglrx: module verification failed: signature and/or required key missing - tainting kernel
EDAC MC: Ver: 3.0.0
[fglrx] Maximum main memory to use for locked dma buffers: 15612 MBytes.
[fglrx] vendor: 1002 device: 67b0 count: 1
[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.10.2 [May 5 2014] with 1 minors
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
kvm: Nested Paging enabled
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 2048MB 1: 2048MB
EDAC amd64: MC: 2: 2048MB 3: 2048MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 2048MB 1: 2048MB
EDAC amd64: MC: 2: 2048MB 3: 2048MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Unbuffered DDR3 RAM
EDAC amd64: CS1: Unbuffered DDR3 RAM
EDAC amd64: CS2: Unbuffered DDR3 RAM
EDAC amd64: CS3: Unbuffered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
usbcore: registered new interface driver snd-usb-audio
XFS (sda1): Mounting Filesystem
Adding 8200188k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:8200188k SSFS
XFS (dm-2): Mounting Filesystem
XFS (dm-2): Ending clean mount
SELinux: initialized (dev dm-2, type xfs), uses xattr
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
LNBx2x attached on addr=8
Mantis 0000:03:05.0: DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
XFS (sda1): Ending clean mount
SELinux: initialized (dev sda1, type xfs), uses xattr
systemd-journald[560]: Received request to flush runtime journal from PID 1
type=1305 audit(1405784845.452:4): audit_pid=843 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
microcode: failed to load file amd-ucode/microcode_amd.bin
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
Bridge firewalling registered
fglrx_pci 0000:01:00.0: irq 57 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1096
[fglrx] Firegl kernel thread PID: 1098
[fglrx] Firegl kernel thread PID: 1099
[fglrx] IRQ 57 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f738000, size:4000
[fglrx] Reserved FB block: Unshared offset:f73c000, size:4c4000
[fglrx] Reserved FB block: Unshared offset:fc00000, size:100000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:ffff4000, size:c000
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
pps pps0: new PPS source ptp0
ixgbe 0000:02:00.0: registered PHC device on enp2s0f0
IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
pps pps1: new PPS source ptp1
ixgbe 0000:02:00.1: registered PHC device on enp2s0f1
IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
ixgbe 0000:02:00.1 enp2s0f1: NIC Link is Up 1 Gbps, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f1: link becomes ready
ixgbe 0000:02:00.1 enp2s0f1: NIC Link is Up 1 Gbps, Flow Control: RX/TX
fuse init (API version 7.22)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
usb 1-1.2: USB disconnect, device number 5
usb 1-1.2: new low-speed USB device number 8 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c069
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Laser Mouse
usb 1-1.2: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input23
hid-generic 0003:046D:C069.0007: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.2/input0
Key type dns_resolver registered
Key type cifs.spnego registered
Key type cifs.idmap registered
SELinux: initialized (dev cifs, type cifs), uses genfs_contexts
usb 1-1.2: USB disconnect, device number 8
usb 1-1.2: new low-speed USB device number 9 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c069
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Laser Mouse
usb 1-1.2: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input24
hid-generic 0003:046D:C069.0008: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.2/input0
usb 1-1.2: USB disconnect, device number 9
usb 1-1.2: new low-speed USB device number 10 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c069
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Laser Mouse
usb 1-1.2: Manufacturer: Logitech
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input25
hid-generic 0003:046D:C069.0009: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.2/input0