dmesg - Run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/inquisitor--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
BIOS-e820: [mem 0x000000001fff0000-0x000000001fffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x1fc00000-0x1fdfffff]
[mem 0x1fc00000-0x1fdfffff] page 2M
init_memory_mapping: [mem 0x1c000000-0x1fbfffff]
[mem 0x1c000000-0x1fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1bffffff] page 2M
init_memory_mapping: [mem 0x1fe00000-0x1ffeffff]
[mem 0x1fe00000-0x1ffeffff] page 4k
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
RAMDISK: [mem 0x1e36f000-0x1f688fff]
ACPI: RSDP 00000000000e0000 000024 (v02 VBOX )
ACPI: XSDT 000000001fff0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 000000001fff00f0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 000000001fff0470 001B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 000000001fff0200 000040
ACPI: APIC 000000001fff0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 000000001fff02a0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000001ffeffff]
Initmem setup node 0 [mem 0x00000000-0x1ffeffff]
NODE_DATA [mem 0x1ffeb000-0x1ffeffff]
[ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001da00000-ffff88001e1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x1ffeffff]
On node 0 totalpages: 130958
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 1984 pages used for memmap
DMA32 zone: 126960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x20000000-0xfffbffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88001fc00000 s86336 r8192 d24256 u1048576
pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 128889
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/inquisitor--vg-root ro
PID hash table entries: 2048 (order: 2, 16384 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 479240K/523832K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 44592K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using PMTIMER reference calibration
tsc: Detected 2651.233 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5302.46 BogoMIPS (lpj=10604932)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU G550 @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
x86: Booting SMP configuration:
mce: CPU supports 0 MCE banks
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10604.93 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:13:33, date: 07/11/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2668] type 00 class 0x040300
pci 0000:00:05.0: reg 0x10: [mem 0xf0804000-0xf0807fff]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0808000-0xf0808fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
pci 0000:00:0b.0: reg 0x10: [mem 0xf0809000-0xf0809fff]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd040-0xd047]
pci 0000:00:0d.0: reg 0x18: [io 0xd050-0xd057]
pci 0000:00:0d.0: reg 0x20: [io 0xd060-0xd06f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf080a000-0xf080bfff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 1 GPEs in block 00 to 07
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 4 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19560K (ffff88001e36f000 - ffff88001f689000)
platform rtc_cmos: registered platform RTC device (no PNP device found)
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x0
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1405091612.591:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 974
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000100000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 42
ipmi message handler version 39.2
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.0: EHCI Host Controller
ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0809000
ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0808000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
Magic number: 6:590:234
rtc_cmos rtc_cmos: setting system clock to 2014-07-11 15:13:33 UTC (1405091613)
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[100]: starting version 204
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
usb 2-1: new full-speed USB device number 2 using ohci-pci
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:e6:a8:2d
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi2 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf080a000 port 0xf080a100 irq 21
usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
tsc: Refined TSC clocksource calibration: 2651.229 MHz
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 41943040 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
random: lvm urandom read with 30 bits of entropy available
bio: create slab at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
init: plymouth-upstart-bridge main process (175) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (183) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (188) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
random: nonblocking pool is initialized
init: plymouth-upstart-bridge main process (190) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (195) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 520188k swap on /dev/mapper/inquisitor--vg-swap_1. Priority:-1 extents:1 across:520188k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[309]: starting version 204
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
parport_pc 00:03: reported by Plug and Play ACPI
lp: driver loaded but no devices found
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
type=1400 audit(1405091622.746:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=365 comm="apparmor_parser"
type=1400 audit(1405091622.746:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=365 comm="apparmor_parser"
type=1400 audit(1405091622.746:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=365 comm="apparmor_parser"
type=1400 audit(1405091622.750:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=365 comm="apparmor_parser"
type=1400 audit(1405091622.750:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=365 comm="apparmor_parser"
type=1400 audit(1405091622.750:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=365 comm="apparmor_parser"
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
intel_rapl: domain package energy ctr 0:0 not working, skip
autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
speaker_outs=3 (0xc/0xf/0xb/0x0/0x0)
hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x10/0x0
inputs:
Mic=0xd
CD=0x15
dig-in=0x11
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
intel_rapl: domain core energy ctr 0:0 not working, skip
intel_rapl: domain uncore energy ctr 0:0 not working, skip
intel_rapl: no valid rapl domains found in package 0
input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
intel_rapl: domain package energy ctr 0:0 not working, skip
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
input: HDA Intel Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
ppdev: user-space parallel port driver
intel_rapl: domain core energy ctr 0:0 not working, skip
intel_rapl: domain uncore energy ctr 0:0 not working, skip
intel_rapl: no valid rapl domains found in package 0
init: failsafe main process (481) killed by TERM signal
init: udev-fallback-graphics main process (733) terminated with status 1
type=1400 audit(1405091625.566:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=833 comm="apparmor_parser"
type=1400 audit(1405091625.570:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
type=1400 audit(1405091625.570:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=833 comm="apparmor_parser"
type=1400 audit(1405091625.570:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=833 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
hrtimer: interrupt took 385099903 ns
[sched_delayed] sched: RT throttling activated