dmesg - 001
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu Nov 21 13:35:52 CST 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ab45e000 (usable)
BIOS-e820: 00000000ab45e000 - 00000000ab870000 (reserved)
BIOS-e820: 00000000ab870000 - 00000000aba25000 (ACPI NVS)
BIOS-e820: 00000000aba25000 - 00000000abb41000 (reserved)
BIOS-e820: 00000000abb41000 - 00000000ac000000 (ACPI NVS)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000850000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF9C00
DMI: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.69 03/25/2014
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x850000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000AC000000 mask 3FFFFC000000 uncachable
1 base 0000B0000000 mask 3FFFF0000000 uncachable
2 base 0000C0000000 mask 3FFFC0000000 uncachable
3 base 000850000000 mask 3FFFF0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xab45e max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000ab45e000
0000000000 - 0080000000 page 1G
0080000000 - 00ab400000 page 2M
00ab400000 - 00ab45e000 page 4k
kernel direct mapping tables up to ab45e000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000850000000
0100000000 - 0840000000 page 1G
0840000000 - 0850000000 page 2M
kernel direct mapping tables up to 850000000 @ a000-c000
RAMDISK: 36f4f000 - 37feff5a
ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM)
ACPI: XSDT 00000000ab792078 00074 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FACP 00000000ab799c70 0010C (v05 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 00000000ab792180 07AE9 (v02 HPQOEM SLIC-WKS 00000369 INTL 20051117)
ACPI: FACS 00000000aba1c080 00040
ACPI: APIC 00000000ab799d80 000C8 (v03 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: FPDT 00000000ab799e48 00044 (v01 HPQOEM SLIC-WKS 01072009 AMI 00010013)
ACPI: MCFG 00000000ab799e90 0003C (v01 HPQOEM OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000ab799ed0 00038 (v01 HPQOEM SLIC-WKS 01072009 AMI. 00000005)
ACPI: SSDT 00000000ab799f08 05913 (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SSDT 00000000ab79f820 02A71 (v02 HPQOEM CpuDef 00004000 INTL 20051117)
ACPI: SSDT 00000000ab7a2298 CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: ASF! 00000000ab86f618 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: IFEU 00000000ab86f6c0 00042 (v01 HPQOEM SLIC-WKS 01072009 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000850000000
Bootmem setup node 0 0000000000000000-0000000850000000
NODE_DATA [000000000000b000 - 000000000003efff]
bootmap [0000000000100000 - 0000000000209fff] pages 10a
(8 early reservations) ==> bootmem [0000000000 - 0850000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [0036f4f000 - 0037feff5a] RAMDISK ==> [0036f4f000 - 0037feff5a]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0002020000 - 00020202c5] BRK ==> [0002020000 - 00020202c5]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000f4bc0] f4bc0
[ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea000f800000-ffffea001d1fffff] PMD -> [ffff880038000000-ffff8800459fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00850000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000ab45e
0: 0x00100000 -> 0x00850000
On node 0 totalpages: 8369147
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3838 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 683158 pages, LIFO batch:31
Normal zone: 104832 pages used for memmap
Normal zone: 7562880 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ab45e000 - 00000000ab870000
PM: Registered nosave memory: 00000000ab870000 - 00000000aba25000
PM: Registered nosave memory: 00000000aba25000 - 00000000abb41000
PM: Registered nosave memory: 00000000abb41000 - 00000000ac000000
PM: Registered nosave memory: 00000000ac000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at ac000000 (gap: ac000000:44000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8249876
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 32914676k/34865152k available (5325k kernel code, 1388564k absent, 561912k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:880
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 45, tsc initial value = 3c08a62bd2c
Fast TSC calibration using PIT
Detected 3590.951 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7181.90 BogoMIPS (lpj=3590951)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 16 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
x2apic not enabled, IRQ remapping init failed
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (57455.21 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at ab870000 (1789952 bytes)
PM: Registering ACPI NVS region at abb41000 (4976640 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f7ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xefffffff]
pci_root PNP0A08:00: host bridge window [mem 0x380000000000-0x38007fffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x38007fffffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.4: reg 10: [mem 0xef92a000-0xef92afff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xef929000-0xef92900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.2: reg 10: [io 0xe0b0-0xe0b7]
pci 0000:00:16.2: reg 14: [io 0xe0a0-0xe0a3]
pci 0000:00:16.2: reg 18: [io 0xe090-0xe097]
pci 0000:00:16.2: reg 1c: [io 0xe080-0xe083]
pci 0000:00:16.2: reg 20: [io 0xe070-0xe07f]
pci 0000:00:16.3: reg 10: [io 0xe060-0xe067]
pci 0000:00:16.3: reg 14: [mem 0xef927000-0xef927fff]
pci 0000:00:19.0: reg 10: [mem 0xef900000-0xef91ffff]
pci 0000:00:19.0: reg 14: [mem 0xef92d000-0xef92dfff]
pci 0000:00:19.0: reg 18: [io 0xe040-0xe05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xef92f000-0xef92f3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xef920000-0xef923fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xef92e000-0xef92e3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xe0f0-0xe0f7]
pci 0000:00:1f.2: reg 14: [io 0xe0e0-0xe0e3]
pci 0000:00:1f.2: reg 18: [io 0xe0d0-0xe0d7]
pci 0000:00:1f.2: reg 1c: [io 0xe0c0-0xe0c3]
pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
pci 0000:00:1f.2: reg 24: [mem 0xef92c000-0xef92c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xef92b000-0xef92b0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
pci 0000:03:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:03:00.0: reg 14: [mem 0xef640000-0xef64ffff 64bit]
pci 0000:03:00.0: reg 1c: [mem 0xef600000-0xef63ffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xef500000-0xef5fffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xef500000-0xef6fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xec000000-0xecffffff]
pci 0000:05:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:05:00.0: reg 1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:05:00.0: reg 24: [io 0xa000-0xa07f]
pci 0000:05:00.0: reg 30: [mem 0xed000000-0xed07ffff pref]
pci 0000:05:00.1: reg 10: [mem 0xed080000-0xed083fff]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xee000000-0xeeffffff]
pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:04:00.0: reg 24: [io 0xb000-0xb07f]
pci 0000:04:00.0: reg 30: [mem 0xef000000-0xef07ffff pref]
pci 0000:04:00.1: reg 10: [mem 0xef080000-0xef083fff]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xe2800000-0xe2803fff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xe2400000-0xe27fffff 64bit pref]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 02-02]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:11.0: bridge window [mem 0xe2400000-0xe28fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.5: PCI bridge to [bus 06-06]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xef200000-0xef2fffff]
pci 0000:07:00.0: reg 1c: [mem 0xef484000-0xef487fff]
pci 0000:07:00.0: reg 30: [mem 0xef380000-0xef3fffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.0: reg 190: [mem 0xef440000-0xef443fff]
pci 0000:07:00.1: reg 10: [mem 0xef100000-0xef1fffff]
pci 0000:07:00.1: reg 1c: [mem 0xef480000-0xef483fff]
pci 0000:07:00.1: reg 30: [mem 0xef300000-0xef37ffff pref]
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:00.1: PME# disabled
pci 0000:07:00.1: reg 184: [mem 0xef420000-0xef423fff]
pci 0000:07:00.1: reg 190: [mem 0xef400000-0xef403fff]
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.6: bridge window [mem 0xef100000-0xef4fffff]
pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:00.0: reg 10: [mem 0xef800000-0xef80ffff 64bit]
pci 0000:09:00.0: reg 18: [mem 0xef810000-0xef811fff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 09-09]
pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.7: bridge window [mem 0xef800000-0xef8fffff]
pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:05.0: reg 10: [mem 0xef700000-0xef700fff]
pci 0000:0a:05.0: supports D1 D2
pci 0000:0a:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0a:05.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xef700000-0xef7fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xefffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x38007fffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX8._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 50 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 51 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 52 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 48, 49, 50, 51, 52, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 48 for MSI
hpet: hpet3 irq 49 for MSI
hpet: hpet4 irq 50 for MSI
hpet: hpet5 irq 51 for MSI
hpet: hpet6 irq 52 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0620-0x063f]
pnp 00:02: [io 0x0800-0x07ff disabled]
pnp 00:02: [io 0x0610-0x061f]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0060]
pnp 00:03: [io 0x0064]
pnp 00:03: [irq 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [irq 12]
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [io 0x0400-0x0453]
pnp 00:0a: [io 0x0458-0x047f]
pnp 00:0a: [io 0x1180-0x119f]
pnp 00:0a: [io 0x0500-0x057f]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfec00000-0xfecfffff]
pnp 00:0a: [mem 0xfed08000-0xfed08fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: [io 0x0454-0x0457]
pnp 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:02: [io 0x0620-0x063f] has been reserved
system 00:02: [io 0x0610-0x061f] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x0400-0x0453] has been reserved
system 00:0a: [io 0x0458-0x047f] has been reserved
system 00:0a: [io 0x1180-0x119f] has been reserved
system 00:0a: [io 0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [io 0x0454-0x0457] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:02:00.0: reg 164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:00:11.0: BAR 14: assigned [mem 0xc2000000-0xc20fffff]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xef500000-0xef6fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: PCI bridge to [bus 05-05]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:00:02.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xee000000-0xef0fffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:02:00.0: reg 164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:02:00.0: reg 164: [mem 0x380000000000-0x380000003fff 64bit pref]
pci 0000:02:00.0: BAR 7: assigned [mem 0xe2804000-0xe287ffff 64bit pref]
pci 0000:02:00.0: BAR 7: set to [mem 0xe2804000-0xe287ffff 64bit pref] (PCI address [0xe2804000-0xe287ffff]
pci 0000:00:11.0: PCI bridge to [bus 02-02]
pci 0000:00:11.0: PCI bridge to [bus 02-02]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xc2000000-0xc20fffff]
pci 0000:00:11.0: bridge window [mem 0xe2400000-0xe28fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 06-06]
pci 0000:00:1c.5: PCI bridge to [bus 06-06]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.0: reg 190: [mem 0xef440000-0xef443fff]
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.1: reg 184: [mem 0xef420000-0xef423fff]
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.0: reg 190: [mem 0xef440000-0xef443fff]
pci 0000:07:00.1: reg 190: [mem 0xef400000-0xef403fff]
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.0: reg 190: [mem 0xef440000-0xef443fff]
pci 0000:07:00.1: reg 184: [mem 0xef420000-0xef423fff]
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.0: reg 184: [mem 0xef460000-0xef463fff]
pci 0000:07:00.0: BAR 7: assigned [mem 0xef400000-0xef41ffff]
pci 0000:07:00.0: BAR 7: set to [mem 0xef400000-0xef41ffff] (PCI address [0xef400000-0xef41ffff]
pci 0000:07:00.0: reg 190: [mem 0xef440000-0xef443fff]
pci 0000:07:00.0: reg 190: [mem 0xef440000-0xef443fff]
pci 0000:07:00.0: BAR 10: assigned [mem 0xef420000-0xef43ffff]
pci 0000:07:00.0: BAR 10: set to [mem 0xef420000-0xef43ffff] (PCI address [0xef420000-0xef43ffff]
pci 0000:07:00.1: reg 184: [mem 0xef420000-0xef423fff]
pci 0000:07:00.1: reg 184: [mem 0xef420000-0xef423fff]
pci 0000:07:00.1: BAR 7: assigned [mem 0xef440000-0xef45ffff]
pci 0000:07:00.1: BAR 7: set to [mem 0xef440000-0xef45ffff] (PCI address [0xef440000-0xef45ffff]
pci 0000:07:00.1: reg 190: [mem 0xef400000-0xef403fff]
pci 0000:07:00.1: reg 190: [mem 0xef400000-0xef403fff]
pci 0000:07:00.1: BAR 10: assigned [mem 0xef460000-0xef47ffff]
pci 0000:07:00.1: BAR 10: set to [mem 0xef460000-0xef47ffff] (PCI address [0xef460000-0xef47ffff]
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: bridge window [io disabled]
pci 0000:00:1c.6: bridge window [mem 0xef100000-0xef4fffff]
pci 0000:00:1c.6: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 09-09]
pci 0000:00:1c.7: PCI bridge to [bus 09-09]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem 0xef800000-0xef8fffff]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xef700000-0xef7fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xefffffff]
pci_bus 0000:00: resource 11 [mem 0x380000000000-0x38007fffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xef500000-0xef6fffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xec000000-0xed0fffff]
pci_bus 0000:05: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xee000000-0xef0fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xc2000000-0xc20fffff]
pci_bus 0000:02: resource 2 [mem 0xe2400000-0xe28fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xef100000-0xef4fffff]
pci_bus 0000:09: resource 1 [mem 0xef800000-0xef8fffff]
pci_bus 0000:0a: resource 1 [mem 0xef700000-0xef7fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xb0000000-0xefffffff]
pci_bus 0000:0a: resource 11 [mem 0x380000000000-0x38007fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:04:00.0: Boot video device
pci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:09:00.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17027k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1405015799.507:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key C4636482CB4726E2
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:16.3: ttyS0 at I/O 0xe060 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xef92f000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xef92e000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2014-07-10 18:10:00 UTC (1405015800)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-336.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
nouveau 0000:05:00.0: setting latency timer to 64
nouveau 0000:05:00.0: enabling device (0104 -> 0107)
nouveau 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
nouveau [ DEVICE][0000:05:00.0] BOOT0 : 0x0e73a0a2
nouveau [ DEVICE][0000:05:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:05:00.0] Family : NVE0
nouveau [ VBIOS][0000:05:00.0] checking PRAMIN for image...
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 3591.345 MHz.
Switching to clocksource tsc
nouveau [ VBIOS][0000:05:00.0] ... signature not found
nouveau [ VBIOS][0000:05:00.0] checking PROM for image...
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
nouveau [ VBIOS][0000:05:00.0] ... appears to be valid
nouveau [ VBIOS][0000:05:00.0] using image from PROM
nouveau [ VBIOS][0000:05:00.0] BIT signature found
nouveau [ VBIOS][0000:05:00.0] version 80.07.c5.00.04
nouveau [ DEVINIT][0000:05:00.0] adaptor not initialised
nouveau [ VBIOS][0000:05:00.0] running init tables
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.32-431.el6.x86_64 #1
Call Trace:
[] ? __report_bad_irq+0x2b/0xa0
[] ? note_interrupt+0x18c/0x1d0
[] ? handle_fasteoi_irq+0xcd/0xf0
[] ? handle_irq+0x49/0xa0
[] ? do_IRQ+0x6c/0xf0
[] ? ret_from_intr+0x0/0x11
[] ? poll_idle+0x41/0x80
[] ? poll_idle+0x13/0x80
[] ? cpuidle_idle_call+0xa7/0x140
[] ? cpu_idle+0xb6/0x110
[] ? start_secondary+0x2ac/0x2ef
handlers:
[] (usb_hcd_irq+0x0/0x90)
Disabling IRQ #16
usb 2-1.1: new low speed USB device number 3 using ehci_hcd
nouveau [ PFB][0000:05:00.0] RAM type: DDR3
nouveau [ PFB][0000:05:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:05:00.0] ZCOMP: 0 tags
usb 2-1.1: New USB device found, idVendor=03f0, idProduct=0024
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: HP Basic USB Keyboard
usb 2-1.1: Manufacturer: CHICONY
usb 2-1.1: configuration #1 chosen from 1 choice
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.1/input0
usb 2-1.2: new low speed USB device number 4 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c018
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Logitech USB Optical Mouse
usb 2-1.2: Manufacturer: Logitech
usb 2-1.2: configuration #1 chosen from 1 choice
input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
generic-usb 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
nouveau [ PTHERM][0000:05:00.0] FAN control: none / external
nouveau [ PTHERM][0000:05:00.0] fan management: disabled
nouveau [ PTHERM][0000:05:00.0] internal sensor: yes
nouveau [ PTHERM][0000:05:00.0] programmed thresholds [ 90(3), 95(3), 105(5), 135(5) ]
[TTM] Zone kernel: Available graphics memory: 16467684 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 02811fa6 0f420010
nouveau [ DRM] DCB outp 03: 02011f62 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002146
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau W[ DRM] voltage table 0x50 unknown
nouveau [ DRM] 2 available performance level(s)
nouveau [ DRM] 1: core 162MHz shader 324MHz memory 648MHz voltage 30mV
nouveau [ DRM] 3: core 445MHz shader 891MHz memory 1080MHz voltage 40mV
nouveau [ DRM] c:
nouveau [ DRM] MM: using COPY for buffer copies
nouveau 0000:05:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau [ DRM] allocated 1024x768 fb: 0x80000, bo ffff88083dcbec00
Console: switching to colour frame buffer device 128x48
nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:05:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:05:00.0 on minor 0
nouveau 0000:04:00.0: setting latency timer to 64
nouveau 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0x0e73a0a2
nouveau [ DEVICE][0000:04:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:04:00.0] Family : NVE0
nouveau [ VBIOS][0000:04:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:04:00.0] ... signature not found
nouveau [ VBIOS][0000:04:00.0] checking PROM for image...
nouveau [ VBIOS][0000:04:00.0] ... appears to be valid
nouveau [ VBIOS][0000:04:00.0] using image from PROM
nouveau [ VBIOS][0000:04:00.0] BIT signature found
nouveau [ VBIOS][0000:04:00.0] version 80.07.c5.00.04
nouveau [ PFB][0000:04:00.0] RAM type: DDR3
nouveau [ PFB][0000:04:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
nouveau [ PTHERM][0000:04:00.0] fan management: disabled
nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
nouveau [ PTHERM][0000:04:00.0] programmed thresholds [ 90(3), 95(3), 105(5), 135(5) ]
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 02811fa6 0f420010
nouveau [ DRM] DCB outp 03: 02011f62 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002146
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau W[ DRM] voltage table 0x50 unknown
nouveau [ DRM] 2 available performance level(s)
nouveau [ DRM] 1: core 162MHz shader 324MHz memory 648MHz voltage 30mV
nouveau [ DRM] 3: core 445MHz shader 891MHz memory 1080MHz voltage 40mV
nouveau [ DRM] c:
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1920x1200 fb: 0x80000, bo ffff88083e446c00
fbcon: nouveaufb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
nouveau 0000:04:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.1.0 20120801 for 0000:04:00.0 on minor 1
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 15.101.00.00 loaded
scsi0 : Fusion MPT SAS Host
mpt2sas 0000:03:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:03:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32935368 kB)
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 56 for MSI/MSI-X
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 58 for MSI/MSI-X
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 60 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 53
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 54
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 55
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 56
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 57
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 58
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 59
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 60
mpt2sas0: iomem(0x00000000ef640000), mapped(0xffffc9000bfa0000), size(65536)
mpt2sas0: ioport(0x000000000000c000), size(256)
mpt2sas0: sending diag reset !!
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(6712 kB)
mpt2sas0: Current Controller Queue Depth(2811), Max Controller Queue Depth(3072)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2308: FWVersion(14.00.01.00), ChipRevision(0x05), BiosVersion(07.27.01.00)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b006a236f0), phys(8)
nouveau E[ PGRAPH][0000:05:00.0] ROP0 ch 1 [0x000003fc92 DRM] 0x80000000 0x80000001
nouveau E[ PGRAPH][0000:05:00.0] ROP1 ch 1 [0x000003fc92 DRM] 0x80000000 0x80000001
nouveau E[ PGRAPH][0000:04:00.0] ROP0 ch 1 [0x000003fc92 DRM] 0x80000000 0x80000001
nouveau E[ PGRAPH][0000:04:00.0] ROP1 ch 1 [0x000003fc92 DRM] 0x80000000 0x80000001
mpt2sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access SEAGATE ST300MM0006 HPS1 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x000b), sas_addr(0x5000c5005a8f6ced), phy(7), device_name(0x5000c5005a8f6cec)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x500605b006a236f0), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access SEAGATE ST300MM0006 HPS1 PQ: 0 ANSI: 6
scsi 0:0:1:0: SSP: handle(0x0009), sas_addr(0x5000c5005a8f76bd), phy(5), device_name(0x5000c5005a8f76bc)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x500605b006a236f0), slot(2)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:2:0: Direct-Access SEAGATE ST300MM0006 HPS1 PQ: 0 ANSI: 6
scsi 0:0:2:0: SSP: handle(0x000a), sas_addr(0x5000c5005a8f7135), phy(6), device_name(0x5000c5005a8f7134)
scsi 0:0:2:0: SSP: enclosure_logical_id(0x500605b006a236f0), slot(1)
scsi 0:0:2:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0-rh
isci 0000:02:00.0: driver configured for rev: 5 silicon
isci 0000:02:00.0: OEM parameter table found in OROM
isci 0000:02:00.0: OEM SAS parameters (version: 1.1) loaded (platform)
isci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
isci 0000:02:00.0: setting latency timer to 64
isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi1 : isci
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
isci 0000:02:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
isci 0000:02:00.0: irq 62 for MSI/MSI-X
ata_generic 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_generic 0000:00:16.2: setting latency timer to 64
scsi2 : ata_generic
scsi3 : ata_generic
ata1: PATA max UDMA/100 cmd 0xe0b0 ctl 0xe0a0 bmdma 0xe070 irq 18
ata2: PATA max UDMA/100 cmd 0xe090 ctl 0xe080 bmdma 0xe078 irq 18
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 63 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
ata3: SATA max UDMA/133 abar m2048@0xef92c000 port 0xef92c100 irq 63
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xef92c000 port 0xef92c200 irq 63
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: hp DVD-RAM GHA3N, RH06, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM hp DVD-RAM GHA3N RH06 PQ: 0 ANSI: 5
xhci_hcd 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:09:00.0: setting latency timer to 64
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:09:00.0: irq 71 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:09:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:09:00.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
firewire_ohci 0000:0a:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:0a:05.0, OHCI version 1.0
sd 0:0:0:0: [sda] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:1:0: [sdb] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:2:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: e7 00 10 08
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: e7 00 10 08
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: e7 00 10 08
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdb:
sdc:
sda:
sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
type=1404 audit(1405015817.251:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
firewire_core: created device fw0: GUID 0060b000009833c7, S400
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277800 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1405015817.571:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 72 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: registered PHC clock
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 74:46:a0:c3:99:14
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 73 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
hda_intel: Disabling MSI
hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:05:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input11
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:04:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card2/input13
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xe000-0xe01f] conflicts with ACPI region SMIO [io 0xe000-0xe01f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sr 6:0:0:0: Attached scsi generic sg3 type 5
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
igb 0000:07:00.0: setting latency timer to 64
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 76 for MSI/MSI-X
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 77 for MSI/MSI-X
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.0: irq 82 for MSI/MSI-X
igb 0000:07:00.0: irq 74 for MSI/MSI-X
igb 0000:07:00.0: irq 75 for MSI/MSI-X
igb 0000:07:00.0: irq 76 for MSI/MSI-X
igb 0000:07:00.0: irq 77 for MSI/MSI-X
igb 0000:07:00.0: irq 78 for MSI/MSI-X
igb 0000:07:00.0: irq 79 for MSI/MSI-X
igb 0000:07:00.0: irq 80 for MSI/MSI-X
igb 0000:07:00.0: irq 81 for MSI/MSI-X
igb 0000:07:00.0: irq 82 for MSI/MSI-X
igb 0000:07:00.0: added PHC on eth1
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth1: (PCIe:5.0Gb/s:Width x1) e4:11:5b:9b:a7:44
igb 0000:07:00.0: eth1: PBA No: G32104-008
igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:07:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
igb 0000:07:00.1: setting latency timer to 64
alloc irq_desc for 83 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 84 for MSI/MSI-X
alloc irq_desc for 85 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 85 for MSI/MSI-X
alloc irq_desc for 86 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 86 for MSI/MSI-X
alloc irq_desc for 87 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 87 for MSI/MSI-X
alloc irq_desc for 88 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node -1
alloc kstat_irqs on node -1
igb 0000:07:00.1: irq 91 for MSI/MSI-X
igb 0000:07:00.1: irq 83 for MSI/MSI-X
igb 0000:07:00.1: irq 84 for MSI/MSI-X
igb 0000:07:00.1: irq 85 for MSI/MSI-X
igb 0000:07:00.1: irq 86 for MSI/MSI-X
igb 0000:07:00.1: irq 87 for MSI/MSI-X
igb 0000:07:00.1: irq 88 for MSI/MSI-X
igb 0000:07:00.1: irq 89 for MSI/MSI-X
igb 0000:07:00.1: irq 90 for MSI/MSI-X
igb 0000:07:00.1: irq 91 for MSI/MSI-X
igb 0000:07:00.1: added PHC on eth2
igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.1: eth2: (PCIe:5.0Gb/s:Width x1) e4:11:5b:9b:a7:45
igb 0000:07:00.1: eth2: PBA No: G32104-008
igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Adding 4194296k swap on /dev/sda1. Priority:-1 extents:1 across:4194296k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0: irq 72 for MSI/MSI-X
e1000e 0000:00:19.0: irq 72 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
ADDRCONF(NETDEV_UP): eth2: link is not ready
8021q: adding VLAN 0 to HW filter on device eth2
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:04:00.0 to PCI:0000:05:00.0
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
eth0: no IPv6 routers present
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: 2048 avtab hash slots, 277805 rules.
SELinux: 2048 avtab hash slots, 277805 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277805 rules