dmesg - pxc-cyborg-athlonx4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-30-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #54-Ubuntu SMP Mon Jun 9 22:45:01 UTC 2014 (Ubuntu 3.13.0-30.54-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfceffff] usable
BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfcf3000-0x00000000cfcfffff] ACPI data
BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-880GM-UD2H/GA-880GM-UD2H, BIOS F8 10/11/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFD00000 mask FFFFFFF00000 uncachable
4 base 0000CFE00000 mask FFFFFFE00000 uncachable
5 base 000100000000 mask FFFF00000000 write-back
6 base 000200000000 mask FFFF00000000 write-back
7 base 000300000000 mask FFFFE0000000 write-back
TOM2: 0000000330000000 aka 13056M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 4GB, type WB
reg 7, base: 12GB, range: 512MB, type WB
total RAM covered: 3325M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3325MB, range: 1MB, type UC
reg 4, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5820-0x000f582f] mapped at [ffff8800000f5820]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000091000] 91000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
[mem 0x32fe00000-0x32fffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
[mem 0x32c000000-0x32fdfffff] page 2M
init_memory_mapping: [mem 0x300000000-0x32bffffff]
[mem 0x300000000-0x32bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfceffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfceffff] page 4k
init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[mem 0x100000000-0x2ffffffff] page 1G
RAMDISK: [mem 0x34f60000-0x367a7fff]
ACPI: RSDP 00000000000f71e0 000014 (v00 GBT )
ACPI: RSDT 00000000cfcf3000 000034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfcf3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfcf30c0 007224 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfcf0000 000040
ACPI: HPET 00000000cfcfa3c0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfcfa400 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfcfa300 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
Initmem setup node 0 [mem 0x00000000-0x32fffffff]
NODE_DATA [mem 0x32fff9000-0x32fffdfff]
[ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x32fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00096fff]
node 0: [mem 0x00100000-0xcfceffff]
node 0: [mem 0x100000000-0x32fffffff]
On node 0 totalpages: 3144838
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3990 pages, LIFO batch:0
DMA32 zone: 13236 pages used for memmap
DMA32 zone: 847088 pages, LIFO batch:31
Normal zone: 35840 pages used for memmap
Normal zone: 2293760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf2fff]
PM: Registered nosave memory: [mem 0xcfcf3000-0xcfcfffff]
PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88032fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095677
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 94000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 12208732K/12579352K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 370620K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 50331648 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3114.014 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6228.02 BogoMIPS (lpj=12456056)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28465 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X4 645 Processor (fam: 10, model: 05, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24912.11 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 21:20:29, date: 06/29/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000330000000 aka 13056M
bus: [bus 00-03] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0400000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe03fffff]
bus: 00 [mem 0x330000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfdf80000-0xfdfbffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x00097000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfcf0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] could not be reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: disabling [mem 0x000d4600-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:08: [mem 0xcfcf0000-0xcfcfffff] could not be reserved
system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
system 00:08: [mem 0xcfd00000-0xcfdfffff] has been reserved
system 00:08: [mem 0xcfe00000-0xcfefffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24864K (ffff880034f60000 - ffff8800367a8000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
microcode: CPU0: patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1404076827.972:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 24022
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1680x1050x32, linelength=6912, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 7104k, total 7104k
Console: switching to colour frame buffer device 210x65
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-30-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: ac244bd3595520e48dacc7db4a170331cc248d65'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:679:349
rtc_cmos 00:04: setting system clock to 2014-06-29 21:20:30 UTC (1404076830)
powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[126]: starting version 204
wmi: Mapper loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc900018b6000, 1c:6f:65:86:fc:2f, XID 083000c0 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ata7.00: ATA-6: Hitachi HDS722525VLAT80, V3UBA6EA, max UDMA/100
ata7.00: 490234752 sectors, multi 16: LBA48
ata7.00: configured for UDMA/100
tsc: Refined TSC clocksource calibration: 3113.773 MHz
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-6: new high-speed USB device number 6 using ehci-pci
ata4.00: ATAPI: HP DVD Writer 1070d, LH22, max UDMA/100
ata2.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
ata2.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-7: Hitachi HDT725025VLA380, V5DOA73A, max UDMA/133
ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/100
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-6: New USB device found, idVendor=1a40, idProduct=0201
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB 2.0 Hub [MTT]
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 7 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM HP DVD Writer 1070d LH22 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
scsi 6:0:0:0: Direct-Access ATA Hitachi HDS72252 V3UB PQ: 0 ANSI: 5
sd 6:0:0:0: [sdd] 490234752 512-byte logical blocks: (251 GB/233 GiB)
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-3: new high-speed USB device number 2 using ehci-pci
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
random: nonblocking pool is initialized
Switched to clocksource tsc
usb 2-3: New USB device found, idVendor=054c, idProduct=01bd
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB 2.0 MultiCard R/W
usb 2-3: Manufacturer: Sony
usb 2-3: SerialNumber: 50000007C838
usb-storage 2-3:1.0: USB Mass Storage device detected
scsi8 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
usb 4-1: new low-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=05f3, idProduct=0203
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: PC Keyboard/Mouse to USB Adapter
usb 4-1: Manufacturer: P.I. Engineering
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: P.I. Engineering PC Keyboard/Mouse to USB Adapter as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input3
hid-generic 0003:05F3:0203.0001: input,hidraw0: USB HID v1.00 Keyboard [P.I. Engineering PC Keyboard/Mouse to USB Adapter] on usb-0000:00:12.1-1/input0
input: P.I. Engineering PC Keyboard/Mouse to USB Adapter as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input4
hid-generic 0003:05F3:0203.0002: input,hidraw1: USB HID v1.00 Mouse [P.I. Engineering PC Keyboard/Mouse to USB Adapter] on usb-0000:00:12.1-1/input1
scsi 8:0:0:0: Direct-Access Sony Card R/W -CF 1.30 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:1: Direct-Access Sony Card R/W -SM/xD 1.30 PQ: 0 ANSI: 0 CCS
usb 3-1: new full-speed USB device number 2 using ohci-pci
scsi 8:0:0:2: Direct-Access Sony Card R/W -SD 1.30 PQ: 0 ANSI: 0 CCS
scsi 8:0:0:3: Direct-Access Sony Card R/W -MS 1.30 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 8:0:0:1: Attached scsi generic sg6 type 0
sd 8:0:0:2: Attached scsi generic sg7 type 0
sd 8:0:0:3: Attached scsi generic sg8 type 0
sd 8:0:0:0: [sde] Attached SCSI removable disk
sd 8:0:0:1: [sdf] Attached SCSI removable disk
sd 8:0:0:2: [sdg] Attached SCSI removable disk
sd 8:0:0:3: [sdh] Attached SCSI removable disk
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: New USB device found, idVendor=0a12, idProduct=0001
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Bluetooth V2.0 Dongle
usb 3-1: Manufacturer: Bluetooth v2.0
usb 3-2: new full-speed USB device number 3 using ohci-pci
usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
usb 3-3: new full-speed USB device number 4 using ohci-pci
usb 3-3: New USB device found, idVendor=1e7d, idProduct=2d51
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: ROCCAT Kone[+]
usb 3-3: Manufacturer: ROCCAT
usb 1-6.7: new full-speed USB device number 7 using ehci-pci
usb 1-6.7: New USB device found, idVendor=0451, idProduct=e012
usb 1-6.7: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-6.7: Product: TI-Nspire(tm) Handheld
usb 1-6.7: Manufacturer: Texas Instruments Incorporated
Adding 6144824k swap on /dev/sda5. Priority:-1 extents:1 across:6144824k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[350]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[fglrx] Maximum main memory to use for locked dma buffers: 11710 MBytes.
[fglrx] vendor: 1002 device: 6818 count: 1
[fglrx] ioport: bar 4, base 0xee00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
usbcore: registered new interface driver btusb
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
type=1400 audit(1404102050.880:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=429 comm="apparmor_parser"
type=1400 audit(1404102050.880:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
type=1400 audit(1404102050.880:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1404102050.880:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
type=1400 audit(1404102050.880:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1404102050.880:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1404102050.920:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=442 comm="apparmor_parser"
input: ROCCAT ROCCAT Kone[+] as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input19
koneplus 0003:1E7D:2D51.0006: input,hiddev0,hidraw2: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone[+]] on usb-0000:00:12.0-3/input0
input: ROCCAT ROCCAT Kone[+] as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input20
koneplus 0003:1E7D:2D51.0007: input,hidraw3: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone[+]] on usb-0000:00:12.0-3/input1
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0005/input/input21
logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:12.0-2:1
init: udev-fallback-graphics main process (672) terminated with status 1
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead-other main process (733) terminated with status 2
init: ureadahead-other main process (756) terminated with status 2
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
init: failsafe main process (837) killed by TERM signal
type=1400 audit(1404102061.404:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=932 comm="apparmor_parser"
type=1400 audit(1404102061.404:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=932 comm="apparmor_parser"
type=1400 audit(1404102061.404:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=932 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1404102062.008:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1011 comm="apparmor_parser"
type=1400 audit(1404102062.008:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
type=1400 audit(1404102062.008:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
type=1400 audit(1404102062.008:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1011 comm="apparmor_parser"
type=1400 audit(1404102062.008:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
type=1400 audit(1404102062.008:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1011 comm="apparmor_parser"
type=1400 audit(1404102062.008:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1010 comm="apparmor_parser"
init: cups main process (940) killed by HUP signal
init: cups main process ended, respawning
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (1091) terminated with status 1
init: alsa-restore main process (1190) terminated with status 99
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1447
[fglrx] Firegl kernel thread PID: 1448
[fglrx] Firegl kernel thread PID: 1449
[fglrx] IRQ 44 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
init: plymouth-stop pre-start process (1819) terminated with status 1
audit_printk_skb: 81 callbacks suppressed
type=1400 audit(1404102091.487:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2461 comm="apparmor_parser"
type=1400 audit(1404102091.487:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2461 comm="apparmor_parser"
type=1400 audit(1404102091.487:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2461 comm="apparmor_parser"
type=1400 audit(1404140696.004:49): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2462 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404140696.004:50): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2462 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404140696.004:51): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=2462 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404140696.112:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=10388 comm="apparmor_parser"
type=1400 audit(1404140696.112:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10388 comm="apparmor_parser"
type=1400 audit(1404140696.112:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10388 comm="apparmor_parser"
type=1400 audit(1404225800.916:55): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=10389 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404225800.916:56): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=10389 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404225800.916:57): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=10389 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404225801.028:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23362 comm="apparmor_parser"
type=1400 audit(1404225801.028:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23362 comm="apparmor_parser"
type=1400 audit(1404225801.028:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23362 comm="apparmor_parser"
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
type=1400 audit(1404313009.632:61): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=23363 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404313009.632:62): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=23363 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404313009.632:63): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=23363 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404313009.732:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=10726 comm="apparmor_parser"
type=1400 audit(1404313009.732:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10726 comm="apparmor_parser"
type=1400 audit(1404313009.732:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=10726 comm="apparmor_parser"
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
type=1400 audit(1404398832.743:67): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=10727 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404398832.743:68): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=10727 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404398832.743:69): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=10727 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404398832.855:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23529 comm="apparmor_parser"
type=1400 audit(1404398832.855:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23529 comm="apparmor_parser"
type=1400 audit(1404398832.855:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23529 comm="apparmor_parser"
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 1-6.6: new high-speed USB device number 8 using ehci-pci
usb 1-6.6: New USB device found, idVendor=22b8, idProduct=41d9
usb 1-6.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6.6: Product: Motorola A855
usb 1-6.6: Manufacturer: Motorola
usb 1-6.6: SerialNumber: 040369930800F01A
usb-storage 1-6.6:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-6.6:1.0
scsi 9:0:0:0: Direct-Access Motorola A855 0001 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg9 type 0
sd 9:0:0:0: [sdi] Attached SCSI removable disk
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 1-6.6: USB disconnect, device number 8
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
type=1400 audit(1404484778.053:73): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=23530 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404484778.053:74): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=23530 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404484778.053:75): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=23530 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404484778.169:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5865 comm="apparmor_parser"
type=1400 audit(1404484778.169:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5865 comm="apparmor_parser"
type=1400 audit(1404484778.169:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5865 comm="apparmor_parser"
usb 2-3: reset high-speed USB device number 2 using ehci-pci
type=1400 audit(1404572381.278:79): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=5866 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404572381.278:80): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=5866 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404572381.278:81): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=5866 comm="cupsd" requested_mask="send" denied_mask="send" signal=kill peer="unconfined"
type=1400 audit(1404572381.374:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=19593 comm="apparmor_parser"
type=1400 audit(1404572381.374:83): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=19593 comm="apparmor_parser"
type=1400 audit(1404572381.374:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=19593 comm="apparmor_parser"
usb 1-6.6: new full-speed USB device number 9 using ehci-pci
usb 1-6.6: New USB device found, idVendor=1f6f, idProduct=0023
usb 1-6.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6.6: Product: Jawbone
usb 1-6.6: Manufacturer: Aliph
usb 1-6.6: SerialNumber: Jawbone_01
hid-generic 0003:1F6F:0023.0009: hiddev0,hidraw6: USB HID v1.11 Device [Aliph Jawbone] on usb-0000:00:12.2-6.6/input0
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 2-3: reset high-speed USB device number 2 using ehci-pci
usb 1-6.6: USB disconnect, device number 9
usb 1-6.6: new high-speed USB device number 10 using ehci-pci
usb 1-6.6: New USB device found, idVendor=22b8, idProduct=41d9
usb 1-6.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6.6: Product: Motorola A855
usb 1-6.6: Manufacturer: Motorola
usb 1-6.6: SerialNumber: 040369930800F01A
usb-storage 1-6.6:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-6.6:1.0
scsi 10:0:0:0: Direct-Access Motorola A855 0001 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdi] Attached SCSI removable disk
usb 2-3: reset high-speed USB device number 2 using ehci-pci