dmesg - Test2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-30-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #54-Ubuntu SMP Mon Jun 9 22:47:59 UTC 2014 (Ubuntu 3.13.0-30.54-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dff6ffff] usable
BIOS-e820: [mem 0x00000000dff70000-0x00000000dff71fff] ACPI NVS
BIOS-e820: [mem 0x00000000dff72000-0x00000000dff92fff] ACPI data
BIOS-e820: [mem 0x00000000dff93000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fecf0000-0x00000000fecf0fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: Dell Computer Corporation Dimension 4600 /02Y832, BIOS A12 08/26/2004
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xdff70 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [c00fe710]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b8c000, 0x01b8cfff] PGTABLE
RAMDISK: [mem 0x35c3a000-0x36e14fff]
ACPI: RSDP 000feba0 000014 (v00 DELL )
ACPI: RSDT 000fd1b3 000034 (v01 DELL 4600i 00000007 ASL 00000061)
ACPI: FACP 000fd1e7 000074 (v01 DELL 4600i 00000007 ASL 00000061)
ACPI: DSDT fffcf6b5 0024C9 (v01 DELL dt_ex 00001000 MSFT 0100000D)
ACPI: FACS dff70000 000040
ACPI: SSDT fffd1cbb 0000BA (v01 DELL st_ex 00001000 MSFT 0100000D)
ACPI: APIC 000fd25b 00006C (v01 DELL 4600i 00000007 ASL 00000061)
ACPI: BOOT 000fd2c7 000028 (v01 DELL 4600i 00000007 ASL 00000061)
ACPI: Local APIC address 0xfee00000
2691MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b8d000, 0x01b8dfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0xdff6ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0xdff6ffff]
On node 0 totalpages: 917263
free_area_init_node: node 0, pgdat c1995100, node_mem_map f403a020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3999 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 5383 pages used for memmap
HighMem zone: 689010 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bb4000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 915479
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 7338872 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:000dff70)
Memory: 3601924K/3669052K available (6522K kernel code, 639K rwdata, 2756K rodata, 872K init, 924K bss, 67128K reserved, 2756040K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19b2000 - 0xc1a8c000 ( 872 kB)
.data : 0xc165ef32 - 0xc19b1d80 (3403 kB)
.text : 0xc1000000 - 0xc165ef32 (6523 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f3c08000 soft=f3c0a000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2992.599 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.19 BogoMIPS (lpj=11970396)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a8c000 - c1a94000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27751 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam: 0f, model: 02, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f3d00000 soft=f3d02000
x86: Booting SMP configuration:
Initializing CPU#1
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11970.64 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdff70000-0xdff71fff] (8192 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 9:23:58, date: 07/04/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xfbb11, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2570] type 00 class 0x060000
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
pci 0000:00:01.0: [8086:2571] type 01 class 0x060400
pci 0000:00:06.0: [8086:2576] type 00 class 0x088000
pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xff20-0xff3f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
pci 0000:00:1f.0: HPET at 0xfed00000
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.1: reg 0x24: [mem 0xfebffc00-0xfebfffff]
pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io 0xfea0-0xfeaf]
pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0xefe0-0xefff]
pci 0000:01:00.0: [10de:0322] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
pci 0000:02:01.0: [1102:0002] type 00 class 0x040100
pci 0000:02:01.0: reg 0x10: [io 0xdf20-0xdf3f]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.1: [1102:7002] type 00 class 0x098000
pci 0000:02:01.1: reg 0x10: [io 0xdf18-0xdf1f]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:08.0: [8086:1050] type 00 class 0x020000
pci 0000:02:08.0: reg 0x10: [mem 0xfcfff000-0xfcffffff]
pci 0000:02:08.0: reg 0x14: [io 0xdf40-0xdf7f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xdff70000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:00: [mem 0x01000000-0xdff6ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved
system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:08: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
system 00:08: [io 0x0c00-0x0c7f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18284K (f5c3a000 - f6e15000)
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
microcode: CPU0 sig=0xf29, pf=0x4, revision=0x21
microcode: CPU1 sig=0xf29, pf=0x4, revision=0x21
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1404465838.832:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1687
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: cannot reserve video memory at 0xa0000
efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata1: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa80800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-30-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 941ac0021776208a30b47336d7a1a15788c8b3ac'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:82:373
vc vcsa1: hash matches
rtc_cmos 00:04: setting system clock to 2014-07-04 09:23:59 UTC (1404465839)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-332B, T408, max UDMA/33
ata3.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
ata3.00: 156250000 sectors, multi 8: LBA
ata4.00: ATA-6: ST380013AS, 8.12, max UDMA/133
ata4.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/33
ata4.00: configured for UDMA/133
isapnp: No Plug & Play device found
scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SM-332B T408 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA ST380013AS 8.12 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 872K (c19b2000 - c1a8c000)
Write protecting the kernel text: 6524k
Write protecting the kernel read-only data: 2764k
systemd-udevd[105]: starting version 204
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:02:08.0 eth0: addr 0xfcfff000, irq 20, MAC addr 00:07:e9:26:8f:3d
usb 1-5: new high-speed USB device number 4 using ehci-pci
usb 1-5: New USB device found, idVendor=1871, idProduct=0101
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Camera
usb 1-5: Manufacturer: AVEO Technology Corp.
tsc: Refined TSC clocksource calibration: 2992.499 MHz
usb 3-1: new full-speed USB device number 2 using uhci_hcd
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: New USB device found, idVendor=413c, idProduct=1003
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Dell USB Keyboard Hub
usb 3-1: Manufacturer: Dell
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
random: nonblocking pool is initialized
usb 3-2: new low-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=045e, idProduct=0040
usb 3-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 3-2: Manufacturer: Microsoft
Switched to clocksource tsc
usb 3-1.1: new full-speed USB device number 4 using uhci_hcd
usb 3-1.1: New USB device found, idVendor=413c, idProduct=2010
usb 3-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.1: Product: Dell USB Keyboard
usb 3-1.1: Manufacturer: Dell
Adding 1950716k swap on /dev/sdb5. Priority:-1 extents:1 across:1950716k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[269]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000880-0x000008af SystemIO conflicts with Region \LEDY 1 (20131115/utaddress-251)
ACPI Warning: 0x00000880-0x000008af SystemIO conflicts with Region \SPKR 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1404480252.663:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=328 comm="apparmor_parser"
type=1400 audit(1404480252.663:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
type=1400 audit(1404480252.663:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
type=1400 audit(1404480252.667:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=328 comm="apparmor_parser"
type=1400 audit(1404480252.667:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
type=1400 audit(1404480252.667:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=328 comm="apparmor_parser"
gameport gameport0: EMU10K1 is pci0000:02:01.1/gameport0, io 0xdf18, speed 1104kHz
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
checking generic (a0000 10000) vs hw (f0000000 8000000)
fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] hdmi device not found 1 0 1
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x034200a2
nouveau [ DEVICE][0000:01:00.0] Chipset: NV34 (NV34)
nouveau [ DEVICE][0000:01:00.0] Family : NV30
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BMP version 5.27
nouveau [ VBIOS][0000:01:00.0] version 04.34.20.22.00
nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq
nouveau [ PFB][0000:01:00.0] RAM type: DDR1
nouveau [ PFB][0000:01:00.0] RAM size: 128 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ CLK][0000:01:00.0] 20:
nouveau [ CLK][0000:01:00.0] --:
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[TTM] Zone kernel: Available graphics memory: 432536 kiB
[TTM] Zone highmem: Available graphics memory: 1810556 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 127 MiB
nouveau [ DRM] GART: 128 MiB
nouveau [ DRM] BMP version 5.39
nouveau [ DRM] DCB version 2.2
nouveau [ DRM] DCB outp 00: 01000300 000088b8
nouveau [ DRM] DCB outp 01: 02010310 000088b8
nouveau [ DRM] DCB outp 02: 01010312 00000000
nouveau [ DRM] DCB outp 03: 02020321 00000003
nouveau [ DRM] Loading NV17 power sequencing microcode
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 0xB517: Parsing digital output script table
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
hidraw: raw HID events driver (C) Jiri Kosina
Linux video capture interface: v2.00
nouveau [ DRM] allocated 1024x768 fb: 0x9000, bo f1c2da00
fbcon: nouveaufb (fb0) is primary device
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Console: switching to colour frame buffer device 128x48
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101)
input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input7
hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input8
hid-generic 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1.1/input1
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: failsafe main process (469) killed by TERM signal
init: udev-fallback-graphics main process (625) terminated with status 1
type=1400 audit(1404480256.011:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=656 comm="apparmor_parser"
type=1400 audit(1404480256.011:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=656 comm="apparmor_parser"
type=1400 audit(1404480256.011:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=656 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e100 0000:02:08.0 eth0: NIC Link is Up 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1400 audit(1404480257.439:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=756 comm="apparmor_parser"
type=1400 audit(1404480258.035:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=806 comm="apparmor_parser"
type=1400 audit(1404480258.035:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
type=1400 audit(1404480258.035:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
type=1400 audit(1404480258.035:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=806 comm="apparmor_parser"
type=1400 audit(1404480258.035:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
type=1400 audit(1404480258.039:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=806 comm="apparmor_parser"
type=1400 audit(1404480258.039:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=805 comm="apparmor_parser"
type=1400 audit(1404480258.039:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=805 comm="apparmor_parser"
type=1400 audit(1404480258.039:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=805 comm="apparmor_parser"
type=1400 audit(1404480258.067:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=809 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
systemd-hostnamed[2112]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
systemd-hostnamed[2431]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (5035 > 5000), lowering kernel.perf_event_max_sample_rate to 25000