dmesg - tr
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22 03:15:09 UTC 2013
Command line: ro root=/dev/mapper/vg_stress-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_stress/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_stress/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000beebd000 (usable)
BIOS-e820: 00000000beebd000 - 00000000bf6bd000 (reserved)
BIOS-e820: 00000000bf6bd000 - 00000000bf7bd000 (ACPI NVS)
BIOS-e820: 00000000bf7bd000 - 00000000bf7ff000 (ACPI data)
BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000043e000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xF2F40
DMI: Hewlett-Packard HP EliteBook 8560w/1631, BIOS 68SVD Ver. F.26 06/07/2012
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x43e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask FC0000000 write-back
6 base 43E000000 mask FFE000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000043e000000
0100000000 - 043e000000 page 2M
kernel direct mapping tables up to 43e000000 @ a000-1c000
RAMDISK: 36f46000 - 37fefdb1
ACPI: RSDP 00000000000f2f60 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bf7fe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 1631 0000000F HP 00000001)
ACPI: DSDT 00000000bf7d4000 22F20 (v02 HPQOEM 1631 00000001 INTL 20060912)
ACPI: FACS 00000000bf787000 00040
ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 1631 00000001 HP 00000001)
ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 1631 00000001 HP 00000001)
ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 1631 00000001 HP 00000001)
ACPI: TCPA 00000000bf7f7000 00032 (v02 HPQOEM 1631 00000000 HP 00000001)
ACPI: SSDT 00000000bf7d3000 0064F (v01 HPQOEM SataPri 00001000 INTL 20060912)
ACPI: SSDT 00000000bf7d2000 00692 (v01 HPQOEM SataSec 00001000 INTL 20060912)
ACPI: SSDT 00000000bf7d0000 004FC (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SLIC 00000000bf7cf000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: SSDT 00000000bf7cc000 0187E (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
ACPI: SSDT 00000000bf7cb000 007CE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bf7ca000 009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: DMAR 00000000bf7c9000 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 00000000bf7f8000 000A5 (v32 HPQOEM 1631 00000001 HP 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000043e000000
Bootmem setup node 0 0000000000000000-000000043e000000
NODE_DATA [0000000000017000 - 000000000004afff]
bootmap [0000000000100000 - 0000000000187bff] pages 88
(8 early reservations) ==> bootmem [0000000000 - 043e000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [0036f46000 - 0037fefdb1] RAMDISK ==> [0036f46000 - 0037fefdb1]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [0002020000 - 00020202e5] BRK ==> [0002020000 - 00020202e5]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 0000017000] PGTABLE ==> [000000a000 - 0000017000]
[ffffea0000000000-ffffea000edfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0043e000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000beebd
0: 0x000bf7ff -> 0x000bf800
0: 0x00100000 -> 0x0043e000
On node 0 totalpages: 4181595
DMA zone: 56 pages used for memmap
DMA zone: 115 pages reserved
DMA zone: 3826 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 763638 pages, LIFO batch:31
Normal zone: 46480 pages used for memmap
Normal zone: 3353200 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000beebd000 - 00000000bf6bd000
PM: Registered nosave memory: 00000000bf6bd000 - 00000000bf7bd000
PM: Registered nosave memory: 00000000bf7bd000 - 00000000bf7ff000
PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4120664
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_stress-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_stress/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_stress/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 16395816k/17793024k available (5325k kernel code, 1066644k absent, 330564k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2394.524 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.04 BogoMIPS (lpj=2394524)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000bf69a000 end: 0x000000bf6b9fff
dmar: No ATSR found
IOAPIC id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
APIC routing finalized to cluster x2apic.
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (38312.38 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bf6bd000 (1048576 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [APPR] (off)
ACPI: Power Resource [LPP] (on)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xd1524000-0xd152400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.3: reg 10: [io 0x5080-0x5087]
pci 0000:00:16.3: reg 14: [mem 0xd152a000-0xd152afff]
pci 0000:00:19.0: reg 10: [mem 0xd1500000-0xd151ffff]
pci 0000:00:19.0: reg 14: [mem 0xd1529000-0xd1529fff]
pci 0000:00:19.0: reg 18: [io 0x5000-0x501f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xd1528000-0xd15283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xd1520000-0xd1523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xd1527000-0xd15273ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x5078-0x507f]
pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 18: [io 0x5070-0x5077]
pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 20: [io 0x5050-0x505f]
pci 0000:00:1f.2: reg 24: [io 0x5040-0x504f]
pci 0000:00:1f.5: reg 10: [io 0x5068-0x506f]
pci 0000:00:1f.5: reg 14: [io 0x508c-0x508f]
pci 0000:00:1f.5: reg 18: [io 0x5060-0x5067]
pci 0000:00:1f.5: reg 1c: [io 0x5088-0x508b]
pci 0000:00:1f.5: reg 20: [io 0x5030-0x503f]
pci 0000:00:1f.5: reg 24: [io 0x5020-0x502f]
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xc7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd1000000-0xd1003fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd14fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:24:00.0: reg 10: [mem 0xd1300000-0xd13007ff]
pci 0000:24:00.0: reg 14: [mem 0xd1305000-0xd13050ff]
pci 0000:24:00.1: reg 10: [mem 0xd1304000-0xd13040ff]
pci 0000:24:00.1: reg 30: [mem 0xffff8000-0xffffffff pref]
pci 0000:24:00.2: reg 10: [mem 0xd1303000-0xd13030ff]
pci 0000:00:1c.2: PCI bridge to [bus 24-24]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xd1300000-0xd13fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:25:00.0: reg 10: [mem 0xd1200000-0xd1201fff 64bit]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:25:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 25-25]
pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:26:00.0: reg 10: [mem 0xd1100000-0xd1101fff 64bit]
pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
pci 0000:26:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 26-26]
pci 0000:00:1c.7: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.7: bridge window [mem 0xd1100000-0xd11fffff]
pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 25 for MSI
hpet: hpet3 irq 26 for MSI
hpet: hpet4 irq 27 for MSI
hpet: hpet5 irq 28 for MSI
hpet: hpet6 irq 29 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed10000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0x00000000-0x00000fff]
pnp 00:01: [mem 0xd1600000-0xd1600fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed45000-0xfed8ffff]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [io 0xfe00-0xfe0f]
pnp 00:04: [io 0xfe80-0xfe8f]
pnp 00:04: [mem 0xfed40000-0xfed44fff]
pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x002e-0x002f]
pnp 00:07: [io 0x004e-0x004f]
pnp 00:07: [io 0x0061]
pnp 00:07: [io 0x0063]
pnp 00:07: [io 0x0065]
pnp 00:07: [io 0x0067]
pnp 00:07: [io 0x0070]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0092]
pnp 00:07: [io 0x00b2-0x00b3]
pnp 00:07: [io 0x0200-0x027f]
pnp 00:07: [io 0x1000-0x100f]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0xffff]
pnp 00:07: [io 0x0400-0x047f]
pnp 00:07: [io 0x0500-0x057f]
pnp 00:07: [io 0xef80-0xef9f]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0070-0x0077]
pnp 00:08: [irq 8]
pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077a]
pnp 00:09: [irq 5]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs SYN0183 SYN0100 SYN0002 PNP0f13 (active)
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pnp 00:0c: [irq 23]
pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] could not be reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
system 00:01: [mem 0xd1600000-0xd1600fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [io 0x0200-0x027f] has been reserved
system 00:07: [io 0x1000-0x100f] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0xffff] has been reserved
system 00:07: [io 0x0400-0x047f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [io 0xef80-0xef9f] has been reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:24:00.1: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.2: BAR 15: assigned [mem 0xca000000-0xca0fffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xca100000-0xca2fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd1080000-0xd10fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xd1400000-0xd14fffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: PCI bridge to [bus 03-23]
pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff]
pci 0000:00:1c.1: bridge window [mem 0xca100000-0xca2fffff 64bit pref]
pci 0000:24:00.1: BAR 6: assigned [mem 0xca000000-0xca007fff pref]
pci 0000:00:1c.2: PCI bridge to [bus 24-24]
pci 0000:00:1c.2: PCI bridge to [bus 24-24]
pci 0000:00:1c.2: bridge window [io disabled]
pci 0000:00:1c.2: bridge window [mem 0xd1300000-0xd13fffff]
pci 0000:00:1c.2: bridge window [mem 0xca000000-0xca0fffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 25-25]
pci 0000:00:1c.3: PCI bridge to [bus 25-25]
pci 0000:00:1c.3: bridge window [io disabled]
pci 0000:00:1c.3: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1c.3: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 26-26]
pci 0000:00:1c.7: PCI bridge to [bus 26-26]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem 0xd1100000-0xd11fffff]
pci 0000:00:1c.7: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc9ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xd1400000-0xd14fffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xcc000000-0xcfffffff]
pci_bus 0000:03: resource 2 [mem 0xca100000-0xca2fffff 64bit pref]
pci_bus 0000:24: resource 1 [mem 0xd1300000-0xd13fffff]
pci_bus 0000:24: resource 2 [mem 0xca000000-0xca0fffff pref]
pci_bus 0000:25: resource 1 [mem 0xd1200000-0xd12fffff]
pci_bus 0000:26: resource 1 [mem 0xd1100000-0xd11fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
pci 0000:26:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:26:00.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17063k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1403622175.533:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32056
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 8A44323FB303E068
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.1: irq 32 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.2: irq 33 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.3: irq 34 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.7: irq 35 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1c12 ss_vid 0 ss_did 0
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: Slot 1 already registered by another hotplug driver
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf625718 0069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: SSDT 00000000bf626a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bf624d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (58 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (51 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (46 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (47 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (27 C)
thermal LNXTHERM:06: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (0 C)
thermal LNXTHERM:07: registered as thermal_zone6
ACPI: Thermal Zone [DM1Z] (0 C)
thermal LNXTHERM:08: registered as thermal_zone7
ACPI: Thermal Zone [DM2Z] (0 C)
thermal LNXTHERM:09: registered as thermal_zone8
ACPI: Thermal Zone [DM3Z] (0 C)
thermal LNXTHERM:0a: registered as thermal_zone9
ACPI: Thermal Zone [DM4Z] (0 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
crash memory driver: version 1.1
serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:16.3: ttyS0 at I/O 0x5080 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd1528000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 16, io mem 0xd1527000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:08: setting system clock to 2014-06-24 15:02:56 UTC (1403622176)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-335.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
acpi device:01: registered as cooling_device8
ACPI: Cant attach device
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
nouveau 0000:01:00.0: setting latency timer to 64
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1d00a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
nouveau [ DEVICE][0000:01:00.0] Family : NVC0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 70.08.64.00.01
nouveau [ MXM][0000:01:00.0] BIOS version 3.0
nouveau [ MXM][0000:01:00.0] MXMS Version 3.0
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: disabled
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ PTHERM][0000:01:00.0] programmed thresholds [ 90(3), 95(3), 105(5), 135(5) ]
[TTM] Zone kernel: Available graphics memory: 8208272 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000313 00010034
nouveau [ DRM] DCB outp 03: 080153d6 0f220020
nouveau [ DRM] DCB outp 04: 08015392 00020020
nouveau [ DRM] DCB outp 05: 080143c6 0f220010
nouveau [ DRM] DCB outp 06: 08014382 00020010
nouveau [ DRM] DCB outp 08: 040383b6 0f220014
nouveau [ DRM] DCB outp 10: 020273a6 0f220010
nouveau [ DRM] DCB outp 11: 02027362 00020010
nouveau [ DRM] DCB outp 13: 02049300 00000000
nouveau [ DRM] DCB conn 00: 00000040
nouveau [ DRM] DCB conn 01: 00001161
nouveau [ DRM] DCB conn 02: 00001231
nouveau [ DRM] DCB conn 03: 01000331
nouveau [ DRM] DCB conn 04: 01000446
nouveau [ DRM] DCB conn 05: 02000546
nouveau [ DRM] DCB conn 06: 00010631
nouveau [ DRM] DCB conn 07: 00010746
nouveau [ DRM] DCB conn 08: 00020847
nouveau [ DRM] DCB conn 09: 00000900
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] ACPI backlight interface available, not registering our own
nouveau [ DRM] 3 available performance level(s)
nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
nouveau [ DRM] 3: core 700MHz shader 1400MHz memory 900MHz voltage 1030mV
nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 900mV
nouveau [ DRM] MM: using COPY0 for buffer copies
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff880432ff8800
fbcon: nouveaufb (fb0) is primary device
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new full speed USB device number 3 using ehci_hcd
Refined TSC clocksource calibration: 2394.560 MHz.
Switching to clocksource tsc
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-1.1: SerialNumber: 002024e63f8c
usb 1-1.1: configuration #1 chosen from 1 choice
usb 2-1.4: new high speed USB device number 3 using ehci_hcd
usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b230
usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-1.4: Product: HP HD Webcam [Fixed]
usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-1.4: SerialNumber: SN0001
usb 2-1.4: configuration #1 chosen from 1 choice
usb 2-1.6: new full speed USB device number 4 using ehci_hcd
usb 2-1.6: New USB device found, idVendor=03f0, idProduct=231d
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: HP Integrated Module
usb 2-1.6: Manufacturer: Broadcom Corp
usb 2-1.6: configuration #1 chosen from 1 choice
Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd40033/0x640000/0xa0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
firewire_ohci 0000:24:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
firewire_ohci 0000:24:00.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:24:00.0, OHCI version 1.10
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:24:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:24:00.2: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:24:00.2] using DMA
xhci_hcd 0000:26:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:26:00.0: setting latency timer to 64
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 3
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 37 for MSI/MSI-X
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:26:00.0: irq 43 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:26:00.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:26:00.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5050 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5058 irq 15
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x5068 ctl 0x508c bmdma 0x5030 irq 19
ata4: SATA max UDMA/133 cmd 0x5060 ctl 0x5088 bmdma 0x5038 irq 19
firewire_core: created device fw0: GUID ffe473fffffffffe, S400
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: hp DVDRAM GT50N, MP01, max UDMA/100
ata2.00: configured for UDMA/100
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
ata1.00: ATA-8: INTEL SSDSA2CW300G3, 4PC10362, max UDMA/133
ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW30 4PC1 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM hp DVDRAM GT50N MP01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda2 for LVM logical volumes vg_stress/lv_swap vg_stress/lv_root
dracut: inactive '/dev/vg_stress/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_stress/lv_home' [221.14 GiB] inherit
dracut: inactive '/dev/vg_stress/lv_swap' [7.83 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_stress-lv_root
dracut: Loading SELinux policy
type=1404 audit(1403622180.875:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277800 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1403622181.347:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: registered PHC clock
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) a0:b3:cc:c0:8a:0e
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
cfg80211: Calling CRDA to update world regulatory domain
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:25:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwlwifi 0000:25:00.0: setting latency timer to 64
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
iwlwifi 0000:25:00.0: irq 46 for MSI/MSI-X
iwlwifi 0000:25:00.0: firmware: requesting iwlwifi-6000-6.ucode
ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region PMIO [io 0x400-0x47f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io 0x0500-0x057f] conflicts with ACPI region GPIO [io 0x500-0x563]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iwlwifi 0000:25:00.0: firmware: requesting iwlwifi-6000-5.ucode
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
iwlwifi 0000:25:00.0: firmware: requesting iwlwifi-6000-4.ucode
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
iwlwifi 0000:25:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
lis3lv02d: laptop model unknown, using default axes configuration
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
lis3lv02d: unknown sensor type 0x33
lis3lv02d: probe of HPQ0004:00 failed with error -22
lis3lv02d driver loaded.
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x18
platform microcode: firmware: requesting intel-ucode/06-2a-07
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x29, date = 2013-06-12
microcode: CPU1 updated to revision 0x29, date = 2013-06-12
microcode: CPU2 updated to revision 0x29, date = 2013-06-12
microcode: CPU3 updated to revision 0x29, date = 2013-06-12
microcode: CPU4 updated to revision 0x29, date = 2013-06-12
microcode: CPU5 updated to revision 0x29, date = 2013-06-12
microcode: CPU6 updated to revision 0x29, date = 2013-06-12
microcode: CPU7 updated to revision 0x29, date = 2013-06-12
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 8208376k swap on /dev/mapper/vg_stress-lv_swap. Priority:-1 extents:1 across:8208376k SSD
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:25:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.13)
hda-intel 0000:00:1b.0: Unstable LPIB (352798 >= 176400); disabling LPIB delay counting
Bridge firewalling registered