dmesg - test2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-29-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 (Ubuntu 3.13.0-29.53-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9bbfff] usable
BIOS-e820: [mem 0x00000000bf9bc000-0x00000000bfa0efff] reserved
BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff] reserved
BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff] reserved
BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd63fff] usable
BIOS-e820: [mem 0x00000000bfd64000-0x00000000bfd9efff] ACPI NVS
BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde1fff] usable
BIOS-e820: [mem 0x00000000bfde2000-0x00000000bfdfefff] ACPI data
BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Acer Aspire 5930 /Eiger , BIOS V1.22 09/10/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFE00000 mask FFFE00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
total RAM covered: 3070M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3070MB, range: 2MB, type UC
found SMP MP-table at [mem 0x000f7310-0x000f731f] mapped at [ffff8800000f7310]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0xbf600000-0xbf7fffff]
[mem 0xbf600000-0xbf7fffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbf5fffff]
[mem 0xbc000000-0xbf5fffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
[mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbf800000-0xbf8a0fff]
[mem 0xbf800000-0xbf8a0fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbf8a7000-0xbf9bbfff]
[mem 0xbf8a7000-0xbf9bbfff] page 4k
init_memory_mapping: [mem 0xbfa0f000-0xbfb07fff]
[mem 0xbfa0f000-0xbfb07fff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0xbfd0f000-0xbfd17fff]
[mem 0xbfd0f000-0xbfd17fff] page 4k
init_memory_mapping: [mem 0xbfd1f000-0xbfd63fff]
[mem 0xbfd1f000-0xbfd63fff] page 4k
init_memory_mapping: [mem 0xbfd9f000-0xbfde1fff]
[mem 0xbfd9f000-0xbfde1fff] page 4k
init_memory_mapping: [mem 0xbfdff000-0xbfdfffff]
[mem 0xbfdff000-0xbfdfffff] page 4k
RAMDISK: [mem 0x35b58000-0x36da3fff]
ACPI: RSDP 00000000000f7170 000024 (v02 PTLTD )
ACPI: XSDT 00000000bfdf447d 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 00000000bfde4000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000bfde5000 00A70D (v02 Intel CANTIGA 06040000 MSFT 03000000)
ACPI: FACS 00000000bfd9efc0 000040
ACPI: HPET 00000000bfdfed86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000bfdfedbe 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIC 00000000bfdfedfa 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: APIC 00000000bfdfef70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bfdfefd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 00000000bfde3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bfdfffff]
Initmem setup node 0 [mem 0x00000000-0xbfdfffff]
NODE_DATA [mem 0xbfddd000-0xbfde1fff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbe00000-ffff8800bedfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbf8a0fff]
node 0: [mem 0xbf8a7000-0xbf9bbfff]
node 0: [mem 0xbfa0f000-0xbfb07fff]
node 0: [mem 0xbfd0f000-0xbfd17fff]
node 0: [mem 0xbfd1f000-0xbfd63fff]
node 0: [mem 0xbfd9f000-0xbfde1fff]
node 0: [mem 0xbfdff000-0xbfdfffff]
On node 0 totalpages: 785117
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12216 pages used for memmap
DMA32 zone: 781121 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
PM: Registered nosave memory: [mem 0xbf9bc000-0xbfa0efff]
PM: Registered nosave memory: [mem 0xbfb08000-0xbfd0efff]
PM: Registered nosave memory: [mem 0xbfd18000-0xbfd1efff]
PM: Registered nosave memory: [mem 0xbfd64000-0xbfd9efff]
PM: Registered nosave memory: [mem 0xbfde2000-0xbfdfefff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8800bf400000 s86336 r8192 d24256 u1048576
pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 772816
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3055712K/3140468K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 84756K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NR_IRQS:16640 nr_irqs:512 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1995.117 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.23 BogoMIPS (lpj=7980468)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28463 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
APIC calibration not consistent with PM-Timer: 331ms instead of 100ms
APIC delta adjusted to PM-Timer: 1247014 (4140045)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7980.46 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfd64000-0xbfd9efff] (241664 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:24:34, date: 06/22/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bfd1ac20 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bfd18620 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 00000000bfd19ca0 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfd19f20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf6504800-0xf6504bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6500000-0xf6503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf6504c00-0xf6504fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6504000-0xf65047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: [10de:0649] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [11ab:436b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf6100000-0xf6103fff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf6100000-0xf61fffff]
pci 0000:03:00.0: [8086:4232] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf6200000-0xf6201fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:05:00.0: [197b:2382] type 00 class 0x088000
pci 0000:05:00.0: reg 0x10: [mem 0xf4000000-0xf40000ff]
pci 0000:05:00.2: [197b:2381] type 00 class 0x080501
pci 0000:05:00.2: reg 0x10: [mem 0xf6000000-0xf60000ff]
pci 0000:05:00.3: [197b:2383] type 00 class 0x088000
pci 0000:05:00.3: reg 0x10: [mem 0xf6000400-0xf60004ff]
pci 0000:05:00.4: [197b:2384] type 00 class 0x088000
pci 0000:05:00.4: reg 0x10: [mem 0xf6000800-0xf60008ff]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf9bc000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfd64000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfde2000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x1200-0x120f] has been reserved
system 00:06: [io 0x0480-0x048f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x1180-0x11ff] has been reserved
system 00:06: [io 0xfe00] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc02fffff pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0500000-0xc06fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0900000-0xc09000ff 64bit]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf6100000-0xf61fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc02fffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0300000-0xc04fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc06fffff]
pci 0000:00:1c.2: bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-07]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-0a]
pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc02fffff pref]
pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf62fffff]
pci_bus 0000:03: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:04: resource 1 [mem 0xc0500000-0xc06fffff]
pci_bus 0000:04: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf60fffff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0d: resource 12 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18736K (ffff880035b58000 - ffff880036da4000)
Simple Boot Flag at 0x57 set to 0x1
microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1403461475.184:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6004
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (61 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (61 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 20, io mem 0xf6504800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6504c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6602cb36f1313bea01c4bda96567cfa723c970d8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:936:443
pcieport 0000:00:1c.4: hash matches
rtc_cmos 00:07: setting system clock to 2014-06-22 18:24:36 UTC (1403461476)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[99]: starting version 204
sky2: driver version 1.30
sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
sky2 0000:02:00.0: irq 46 for MSI/MSI-X
sky2 0000:02:00.0 eth0: addr 00:1d:72:d1:10:f7
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:05:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:05:00.0: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:05:00.0: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
sdhci-pci 0000:05:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:05:00.2: Refusing to bind to secondary interface.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6504000 port 0xf6504100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf6504000 port 0xf6504180 irq 47
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf6504000 port 0xf6504300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xf6504000 port 0xf6504380 irq 47
usb 1-3: new high-speed USB device number 2 using ehci-pci
mmc0: new SD card at address df0c
mmcblk0: mmc0:df0c SD016 14.0 MiB
mmcblk0: p1
usb 1-3: New USB device found, idVendor=064e, idProduct=a117
usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-3: Product: Acer HD Crystal Eye webcam
usb 1-3: Manufacturer: SuYin
usb 1-3: SerialNumber: CN1014-S36B-OV01-VA-R03.00.00
uvesafb: NVIDIA Corporation, G96 Board - 06160001, Chip Rev , OEM: NVIDIA, VBE v3.0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 6-2: new low-speed USB device number 2 using uhci_hcd
uvesafb: VBIOS/hardware doesn't support DDC transfers
uvesafb: no monitor limits have been set, default refresh rate will be used
uvesafb: scrolling: redraw
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 6-2: New USB device found, idVendor=09da, idProduct=000a
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB Mouse
usb 6-2: Manufacturer: A4Tech
hidraw: raw HID events driver (C) Jiri Kosina
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
ata2.00: configured for UDMA/133
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input6
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-2/input0
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RP05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000/0x0, board id: 3655, fw id: 350306
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
ata5: SATA link down (SStatus 0 SControl 300)
Console: switching to colour frame buffer device 160x50
uvesafb: framebuffer at 0xcd000000, mapped to 0xffffc90010780000, using 8000k, total 14336k
fb0: VESA VGA frame buffer device
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 6291452k swap on /dev/sda5. Priority:-1 extents:1 across:6291452k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[283]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
wmi: Mapper loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Device: 0x13
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input8
Linux video capture interface: v2.00
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 ABG, REV=0x54
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
usb 8-2: new full-speed USB device number 2 using uhci_hcd
SKU: Nid=0x1d sku_cfg=0x4016852d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000006
SKU: customization=0x00000085
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=3 (0x14/0x17/0x16/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Mic=0x18
Internal Mic=0x12
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4016852d for NID 0x1d
realtek: Enabling init ASM_ID=0x852d CODEC_ID=10ec0888
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
uvcvideo: Found UVC 1.00 device Acer HD Crystal Eye webcam (064e:a117)
usb 8-2: New USB device found, idVendor=0a5c, idProduct=2101
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Acer Module
usb 8-2: Manufacturer: Broadcom Corp
input: Acer HD Crystal Eye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver btusb
type=1400 audit(1403447092.275:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=437 comm="apparmor_parser"
type=1400 audit(1403447092.275:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
type=1400 audit(1403447092.275:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
type=1400 audit(1403447092.275:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=361 comm="apparmor_parser"
type=1400 audit(1403447092.275:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=361 comm="apparmor_parser"
type=1400 audit(1403447092.275:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=361 comm="apparmor_parser"
type=1400 audit(1403447092.275:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
type=1400 audit(1403447092.275:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
type=1400 audit(1403447092.275:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=361 comm="apparmor_parser"
type=1400 audit(1403447092.275:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=361 comm="apparmor_parser"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (615) killed by TERM signal
usb 8-2: USB disconnect, device number 2
audit_printk_skb: 24 callbacks suppressed
type=1400 audit(1403447099.307:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=720 comm="apparmor_parser"
type=1400 audit(1403447099.307:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=720 comm="apparmor_parser"
type=1400 audit(1403447099.307:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=720 comm="apparmor_parser"
type=1400 audit(1403447099.331:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=719 comm="apparmor_parser"
type=1400 audit(1403447099.331:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=719 comm="apparmor_parser"
type=1400 audit(1403447099.331:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=719 comm="apparmor_parser"
type=1400 audit(1403447099.335:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=770 comm="apparmor_parser"
type=1400 audit(1403447099.335:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=770 comm="apparmor_parser"
type=1400 audit(1403447099.335:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=770 comm="apparmor_parser"
type=1400 audit(1403447099.335:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=770 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (807) killed by HUP signal
init: cups main process ended, respawning
sky2 0000:02:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:24:8c:46:bc:bb
wlan0: send auth to 00:24:8c:46:bc:bb (try 1/3)
wlan0: authenticated
iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: waiting for beacon from 00:24:8c:46:bc:bb
wlan0: associate with 00:24:8c:46:bc:bb (try 1/3)
wlan0: RX AssocResp from 00:24:8c:46:bc:bb (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
ACPI: \_SB_.PCI0.PEGP.VGA_.MXMI: Excess arguments - Caller passed 2, method requires 1 (20131115/nsarguments-263)
ACPI: \_SB_.PCI0.PEGP.VGA_.MXMS: Excess arguments - Caller passed 2, method requires 1 (20131115/nsarguments-263)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 156 callbacks suppressed
type=1400 audit(1403447130.289:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1997 comm="apparmor_parser"
type=1400 audit(1403447130.289:83): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1997 comm="apparmor_parser"
type=1400 audit(1403447130.289:84): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1997 comm="apparmor_parser"
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
perf samples too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 19992)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf samples too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU0: Core temperature/speed normal