dmesg - bench2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-29-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 (Ubuntu 3.13.0-29.53-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ac079fff] usable
BIOS-e820: [mem 0x00000000ac07a000-0x00000000ac65bfff] reserved
BIOS-e820: [mem 0x00000000ac65c000-0x00000000ac8fefff] ACPI NVS
BIOS-e820: [mem 0x00000000ac8ff000-0x00000000acf25fff] reserved
BIOS-e820: [mem 0x00000000acf26000-0x00000000acf26fff] usable
BIOS-e820: [mem 0x00000000acf27000-0x00000000acfacfff] ACPI NVS
BIOS-e820: [mem 0x00000000acfad000-0x00000000ad3d5fff] usable
BIOS-e820: [mem 0x00000000ad3d6000-0x00000000ad7f3fff] reserved
BIOS-e820: [mem 0x00000000ad7f4000-0x00000000ad7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000044fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme9, BIOS P3.30 01/28/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x450000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFC00000000 write-back
1 base 000400000000 mask 3FFFC0000000 write-back
2 base 000440000000 mask 3FFFF0000000 write-back
3 base 0000AE000000 mask 3FFFFE000000 uncachable
4 base 0000B0000000 mask 3FFFF0000000 uncachable
5 base 0000C0000000 mask 3FFFC0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 17GB, range: 256MB, type WB
reg 3, base: 2784MB, range: 32MB, type UC
reg 4, base: 2816MB, range: 256MB, type UC
reg 5, base: 3GB, range: 1GB, type UC
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 256MB, type WB
reg 3, base: 2784MB, range: 32MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17GB, range: 256MB, type WB
e820: update [mem 0xae000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xad800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [ffff8800000fdab0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x44fe00000-0x44fffffff]
[mem 0x44fe00000-0x44fffffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x44c000000-0x44fdfffff]
[mem 0x44c000000-0x44fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x44bffffff]
[mem 0x400000000-0x43fffffff] page 1G
[mem 0x440000000-0x44bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xac079fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xabffffff] page 2M
[mem 0xac000000-0xac079fff] page 4k
init_memory_mapping: [mem 0xacf26000-0xacf26fff]
[mem 0xacf26000-0xacf26fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xacfad000-0xad3d5fff]
[mem 0xacfad000-0xacffffff] page 4k
[mem 0xad000000-0xad1fffff] page 2M
[mem 0xad200000-0xad3d5fff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0xad7f4000-0xad7fffff]
[mem 0xad7f4000-0xad7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35b82000-0x36db8fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000ac87f088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ac887ab0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ac87f1a8 008908 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000ac8fcf80 000040
ACPI: APIC 00000000ac887ba8 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ac887ca8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ac887cf0 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: AAFT 00000000ac887d30 0000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000ac887df0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ac887e28 06E284 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 00000000ac8f60b0 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 00000000ac8f61e0 000210 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 00000000ac8f63f0 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 00000000ac8f6498 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 00000000ac8f64c8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: BGRT 00000000ac8f6580 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000044fffffff]
Initmem setup node 0 [mem 0x00000000-0x44fffffff]
NODE_DATA [mem 0x44fff8000-0x44fffcfff]
[ffffea0000000000-ffffea00113fffff] PMD -> [ffff88043f600000-ffff88044f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x44fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xac079fff]
node 0: [mem 0xacf26000-0xacf26fff]
node 0: [mem 0xacfad000-0xad3d5fff]
node 0: [mem 0xad7f4000-0xad7fffff]
node 0: [mem 0x100000000-0x44fffffff]
On node 0 totalpages: 4179021
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10963 pages used for memmap
DMA32 zone: 701616 pages, LIFO batch:31
Normal zone: 54272 pages used for memmap
Normal zone: 3473408 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xac07a000-0xac65bfff]
PM: Registered nosave memory: [mem 0xac65c000-0xac8fefff]
PM: Registered nosave memory: [mem 0xac8ff000-0xacf25fff]
PM: Registered nosave memory: [mem 0xacf27000-0xacfacfff]
PM: Registered nosave memory: [mem 0xad3d6000-0xad7f3fff]
PM: Registered nosave memory: [mem 0xad800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xad800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88044fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113701
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16351196K/16716084K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 364888K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
NR_IRQS:16640 nr_irqs:1184 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3199.821 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.64 BogoMIPS (lpj=12799284)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28463 entries in 112 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x000000ac60f000 end: 0x000000ac639fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 2126489977649899 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (76795.70 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xac65c000-0xac8fefff] (2764800 bytes)
PM: Registering ACPI NVS region [mem 0xacf27000-0xacfacfff] (548864 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 4:30:06, date: 06/23/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf09000-0xfbf09fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf08000-0xfbf0800f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf07000-0xfbf073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf06000-0xfbf063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf05000-0xfbf057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf04000-0xfbf040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1002:6819] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfbe00000-0xfbe3ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:02:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xd0110000-0xd011ffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0xd0100000-0xd010ffff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0xfbd00000-0xfbd007ff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
pci 0000:06:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xd040-0xd047]
pci 0000:06:00.0: reg 0x14: [io 0xd030-0xd033]
pci 0000:06:00.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:06:00.0: reg 0x1c: [io 0xd010-0xd013]
pci 0000:06:00.0: reg 0x20: [io 0xd000-0xd00f]
pci 0000:06:00.0: reg 0x24: [mem 0xfbc10000-0xfbc101ff]
pci 0000:06:00.0: reg 0x30: [mem 0xfbc00000-0xfbc0ffff pref]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:07:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:07:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:07:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:07:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:07:00.0: reg 0x24: [mem 0xfbb10000-0xfbb101ff]
pci 0000:07:00.0: reg 0x30: [mem 0xfbb00000-0xfbb0ffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:08:00.0: [10b5:8605] type 01 class 0x060400
pci 0000:08:00.0: reg 0x10: [mem 0xfb700000-0xfb703fff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 08-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb7fffff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:09:01.0: [10b5:8605] type 01 class 0x060400
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:02.0: [10b5:8605] type 01 class 0x060400
pci 0000:09:02.0: supports D1 D2
pci 0000:09:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.0: [10b5:8605] type 01 class 0x060400
pci 0000:09:03.0: supports D1 D2
pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [io 0x9000-0xafff]
pci 0000:08:00.0: bridge window [mem 0xfb400000-0xfb6fffff]
pci 0000:08:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:0a:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0a:00.0: reg 0x10: [mem 0xfb600000-0xfb6007ff 64bit]
pci 0000:0a:00.0: reg 0x18: [io 0xa000-0xa0ff]
pci 0000:0a:00.0: supports D2
pci 0000:0a:00.0: PME# supported from D2 D3hot D3cold
pci 0000:09:01.0: PCI bridge to [bus 0a]
pci 0000:09:01.0: bridge window [io 0xa000-0xafff]
pci 0000:09:01.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:0b:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0xd0010000-0xd001ffff 64bit pref]
pci 0000:0b:00.0: reg 0x18: [mem 0xd0000000-0xd000ffff 64bit pref]
pci 0000:0b:00.0: reg 0x30: [mem 0xfb500000-0xfb5007ff pref]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:02.0: PCI bridge to [bus 0b]
pci 0000:09:02.0: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:09:02.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:0c:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x10: [io 0x9040-0x9047]
pci 0000:0c:00.0: reg 0x14: [io 0x9030-0x9033]
pci 0000:0c:00.0: reg 0x18: [io 0x9020-0x9027]
pci 0000:0c:00.0: reg 0x1c: [io 0x9010-0x9013]
pci 0000:0c:00.0: reg 0x20: [io 0x9000-0x900f]
pci 0000:0c:00.0: reg 0x24: [mem 0xfb410000-0xfb4101ff]
pci 0000:0c:00.0: reg 0x30: [mem 0xfb400000-0xfb40ffff pref]
pci 0000:0c:00.0: PME# supported from D3hot
pci 0000:09:03.0: PCI bridge to [bus 0c]
pci 0000:09:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:09:03.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:0d:00.0: [1b4b:9220] type 00 class 0x010601
pci 0000:0d:00.0: reg 0x10: [io 0xb050-0xb057]
pci 0000:0d:00.0: reg 0x14: [io 0xb040-0xb043]
pci 0000:0d:00.0: reg 0x18: [io 0xb030-0xb037]
pci 0000:0d:00.0: reg 0x1c: [io 0xb020-0xb023]
pci 0000:0d:00.0: reg 0x20: [io 0xb000-0xb01f]
pci 0000:0d:00.0: reg 0x24: [mem 0xfba10000-0xfba107ff]
pci 0000:0d:00.0: reg 0x30: [mem 0xfba00000-0xfba0ffff pref]
pci 0000:0d:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:0e:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:0e:00.0: reg 0x10: [mem 0xfb900000-0xfb90ffff 64bit]
pci 0000:0e:00.0: reg 0x18: [mem 0xfb910000-0xfb911fff 64bit]
pci 0000:0e:00.0: supports D1 D2
pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:0f:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 0x10: [mem 0xfb800000-0xfb80ffff 64bit]
pci 0000:0f:00.0: reg 0x18: [mem 0xfb810000-0xfb811fff 64bit]
pci 0000:0f:00.0: supports D1 D2
pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 0f]
pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xfbffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xac07a000-0xafffffff]
e820: reserve RAM buffer [mem 0xacf27000-0xafffffff]
e820: reserve RAM buffer [mem 0xad3d6000-0xafffffff]
e820: reserve RAM buffer [mem 0xad800000-0xafffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: [io 0x0400-0x0453] could not be reserved
system 00:09: [io 0x0458-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [io 0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:09:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:09:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:09:01.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:09:01.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:09:01.0: PCI bridge to [bus 0a]
pci 0000:09:01.0: bridge window [io 0xa000-0xafff]
pci 0000:09:01.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:09:02.0: PCI bridge to [bus 0b]
pci 0000:09:02.0: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:09:02.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:09:03.0: PCI bridge to [bus 0c]
pci 0000:09:03.0: bridge window [io 0x9000-0x9fff]
pci 0000:09:03.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [io 0x9000-0xafff]
pci 0000:08:00.0: bridge window [mem 0xfb400000-0xfb6fffff]
pci 0000:08:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-0c]
pci 0000:00:1c.3: bridge window [io 0x9000-0xafff]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb7fffff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0f]
pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 10]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xbc000000-0xfbffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 0 [io 0x9000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xfb400000-0xfb7fffff]
pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x9000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff]
pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0a: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:0b: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0c: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:0d: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0d: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:0e: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:0f: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:10: resource 4 [io 0x0000-0x03af]
pci_bus 0000:10: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:10: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:10: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:10: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:10: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:10: resource 10 [mem 0xbc000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18652K (ffff880035b82000 - ffff880036db9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa807a000-0xac07a000] (64MB) mapped at [ffff8800a807a000-ffff8800ac079fff]
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x70c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1403497805.584:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31972
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:08:00.0: irq 65 for MSI/MSI-X
pcieport 0000:09:01.0: irq 66 for MSI/MSI-X
pcieport 0000:09:02.0: irq 67 for MSI/MSI-X
pcieport 0000:09:03.0: irq 68 for MSI/MSI-X
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:09:01.0:pcie24: HPC vendor_id 10b5 device_id 8605 ss_vid 10b5 ss_did 8605
pciehp 0000:09:01.0:pcie24: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf07000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf06000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0e:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 76 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-29-generic xhci_hcd
usb usb3: SerialNumber: 0000:0e:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-29-generic xhci_hcd
usb usb4: SerialNumber: 0000:0e:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0f:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 83 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 84 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-29-generic xhci_hcd
usb usb5: SerialNumber: 0000:0f:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-29-generic xhci_hcd
usb usb6: SerialNumber: 0000:0f:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6602cb36f1313bea01c4bda96567cfa723c970d8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:627:515
rtc_cmos 00:05: setting system clock to 2014-06-23 04:30:06 UTC (1403497806)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[171]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 85 for MSI/MSI-X
PTP clock support registered
tg3.c:v3.134 (Sep 16, 2013)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:46:20:b0
tg3 0000:05:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05100 irq 85
ata2: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05180 irq 85
ata3: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05200 irq 85
ata4: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05280 irq 85
ata5: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05300 irq 85
ata6: SATA max UDMA/133 abar m2048@0xfbf05000 port 0xfbf05380 irq 85
ahci 0000:06:00.0: irq 86 for MSI/MSI-X
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfbc10000 port 0xfbc10100 irq 86
ata8: SATA max UDMA/133 abar m512@0xfbc10000 port 0xfbc10180 irq 86
ahci 0000:07:00.0: irq 87 for MSI/MSI-X
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 87
ata10: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 87
ahci 0000:0c:00.0: irq 88 for MSI/MSI-X
ahci 0000:0c:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi10 : ahci
scsi11 : ahci
ata11: SATA max UDMA/133 abar m512@0xfb410000 port 0xfb410100 irq 88
ata12: SATA max UDMA/133 abar m512@0xfb410000 port 0xfb410180 irq 88
ahci 0000:0d:00.0: irq 89 for MSI/MSI-X
tg3 0000:0b:00.0 eth1: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:48:1c:ed
tg3 0000:0b:00.0 eth1: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:0b:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0b:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
firewire_ohci 0000:0a:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ahci 0000:0d:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0d:00.0: flags: 64bit ncq pio
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
scsi16 : ahci
scsi17 : ahci
scsi18 : ahci
scsi19 : ahci
ata13: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10100 irq 89
ata14: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10180 irq 89
ata15: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10200 irq 89
ata16: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10280 irq 89
ata17: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10300 irq 89
ata18: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10380 irq 89
ata19: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10400 irq 89
ata20: SATA max UDMA/133 abar m2048@0xfba10000 port 0xfba10480 irq 89
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATAPI: ATAPI iHBS212 2, 5L09, max UDMA/100
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata5.00: configured for UDMA/100
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata2.00: ATA-8: WDC WD20EARX-00MMMB0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: KINGSTON SH103S3120G, 501ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata14: SATA link down (SStatus 0 SControl 300)
ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata20.00: configured for UDMA/66
ata15: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S3 501A PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00M 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata18: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: CD-ROM ATAPI iHBS212 2 5L09 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
scsi 19:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 19:0:0:0: Attached scsi generic sg3 type 3
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:0a:00.0: created device fw0: GUID 008f1300cb511200, S400
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 73 bits of entropy available
init: plymouth-upstart-bridge main process (292) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (302) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (305) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (307) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (309) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
Adding 15998972k swap on /dev/sdb5. Priority:-1 extents:1 across:15998972k FS
usb 2-1.1: New USB device found, idVendor=046d, idProduct=0b06
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Logitech BT Mini-Receiver
usb 2-1.1: Manufacturer: Logitech
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 3 ports detected
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
usb 2-1.3: new high-speed USB device number 4 using ehci-pci
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-udevd[442]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 2-1.3: New USB device found, idVendor=0bda, idProduct=8178
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: USB WLAN
usb 2-1.3: Manufacturer: Realtek
usb 2-1.3: SerialNumber: 00e04c000001
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
wmi: Mapper loaded
mei_me 0000:00:16.0: irq 90 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPR2 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x174B:0xE218).
[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
ATOM BIOS: C40304
radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 8186368 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading PITCAIRN Microcode
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
random: nonblocking pool is initialized
snd_hda_intel 0000:00:1b.0: irq 91 for MSI/MSI-X
autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0xc/0x0
inputs:
Mic=0x12
Line=0x11
[drm] GART: num cpu pages 262144, num gpu pages 262144
usb 2-1.1.2: new full-speed USB device number 5 using ehci-pci
[drm] probing gen 2 caps for device 8086:3c04 = 7a7903/e
[drm] PCIE gen 3 link speeds already enabled
type=1400 audit(1403469007.797:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=728 comm="apparmor_parser"
type=1400 audit(1403469007.797:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=728 comm="apparmor_parser"
type=1400 audit(1403469007.797:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=728 comm="apparmor_parser"
[drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880435472c00
radeon 0000:02:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880435472c04
radeon 0000:02:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880435472c08
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880435472c0c
radeon 0000:02:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880435472c10
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90011fb5a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 92 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
type=1400 audit(1403469007.801:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=749 comm="apparmor_parser"
type=1400 audit(1403469007.801:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=749 comm="apparmor_parser"
type=1400 audit(1403469007.801:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=749 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
type=1400 audit(1403469007.801:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=749 comm="apparmor_parser"
type=1400 audit(1403469007.801:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=749 comm="apparmor_parser"
type=1400 audit(1403469007.801:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=749 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rtl8192cu: Chip version 0x11
init: cups main process (754) killed by HUP signal
init: cups main process ended, respawning
usb 2-1.1.2: New USB device found, idVendor=046d, idProduct=c71b
usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.2: Product: Logitech BT Mini-Receiver
usb 2-1.1.2: Manufacturer: Logitech
usb 2-1.1.2: SerialNumber: 001F20251DD1
rtl8192cu: MAC address: 64:66:b3:25:08:65
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
usbcore: registered new interface driver rtl8192cu
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
intel_rapl: domain dram energy ctr 0:0 not working, skip
init: failsafe main process (811) killed by TERM signal
usb 2-1.1.3: new full-speed USB device number 6 using ehci-pci
[drm] ring test on 0 succeeded in 4 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 1 usecs
tg3 0000:05:00.0: irq 93 for MSI/MSI-X
tg3 0000:05:00.0: irq 94 for MSI/MSI-X
tg3 0000:05:00.0: irq 95 for MSI/MSI-X
tg3 0000:05:00.0: irq 96 for MSI/MSI-X
tg3 0000:05:00.0: irq 97 for MSI/MSI-X
usb 2-1.1.3: New USB device found, idVendor=046d, idProduct=c71c
usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1.3: Product: Logitech BT Mini-Receiver
usb 2-1.1.3: Manufacturer: Logitech
usb 2-1.1.3: SerialNumber: 001F20251DD1
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input5
hid-generic 0003:046D:C71B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.1.2/input0
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/input/input6
hid-generic 0003:046D:C71C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.1.3/input0
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] Enabling audio 1 support
[drm] Enabling audio 2 support
[drm] Enabling audio 3 support
[drm] Enabling audio 4 support
[drm] Enabling audio 5 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 1 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:3c04 = 7a7903/e
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0: irq 98 for MSI/MSI-X
tg3 0000:0b:00.0: irq 99 for MSI/MSI-X
tg3 0000:0b:00.0: irq 100 for MSI/MSI-X
tg3 0000:0b:00.0: irq 101 for MSI/MSI-X
tg3 0000:0b:00.0: irq 102 for MSI/MSI-X
ca0132 DOWNLOAD OK :-) DSP IS RUNNING.
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] radeon: dpm initialized
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] fb mappable at 0xC1480000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:02:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:02:00.1: Using LPIB position fix
hda-intel 0000:02:00.1: Force to non-snoop mode
snd_hda_intel 0000:02:00.1: irq 103 for MSI/MSI-X
hda-intel 0000:02:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input11
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1338) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with a0:f3:c1:85:a9:88
wlan0: send auth to a0:f3:c1:85:a9:88 (try 1/3)
wlan0: authenticated
wlan0: associate with a0:f3:c1:85:a9:88 (try 1/3)
wlan0: RX AssocResp from a0:f3:c1:85:a9:88 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: AU
cfg80211: Regulatory domain changed to country: AU
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: deauthenticating from a0:f3:c1:85:a9:88 by local choice (reason=2)
wlan0: authenticate with a0:f3:c1:85:a9:88
wlan0: send auth to a0:f3:c1:85:a9:88 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with a0:f3:c1:85:a9:88 (try 1/3)
wlan0: RX AssocResp from a0:f3:c1:85:a9:88 (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: AU
cfg80211: Regulatory domain changed to country: AU
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
IPv6: wlan0: IPv6 duplicate address fe80::6666:b3ff:fe25:865 detected!
audit_printk_skb: 171 callbacks suppressed
type=1400 audit(1403469037.849:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2602 comm="apparmor_parser"
type=1400 audit(1403469037.849:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2602 comm="apparmor_parser"
type=1400 audit(1403469037.849:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2602 comm="apparmor_parser"
systemd-hostnamed[6777]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[8362]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000