dmesg - GTS250
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.6-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140521 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffadfff] ACPI data
BIOS-e820: [mem 0x00000000bffae000-0x00000000bffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffedfff] reserved
BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: ACER Aspire M5640/M3640/MCP73PV, BIOS R01-C2 02/26/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask FC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
BRK [0x01b3a000, 0x01b3afff] PGTABLE
BRK [0x01b3b000, 0x01b3bfff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01b3c000, 0x01b3cfff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbff9ffff] page 4k
RAMDISK: [mem 0x379a4000-0x37cc9fff]
ACPI: RSDP 00000000000fa6b0 000014 (v00 ACPIAM)
ACPI: RSDT 00000000bffa0000 000048 (v01 ACRSYS ACRPRDCT 20090226 MSFT 00000097)
ACPI: FACP 00000000bffa0200 000084 (v01 022609 FACP1953 20090226 MSFT 00000097)
ACPI: DSDT 00000000bffa0620 006464 (v01 A7399 A7399221 00000221 INTL 20051117)
ACPI: FACS 00000000bffae000 000040
ACPI: APIC 00000000bffa0390 000080 (v01 022609 APIC1953 20090226 MSFT 00000097)
ACPI: MCFG 00000000bffa0410 00003C (v01 022609 OEMMCFG 20090226 MSFT 00000097)
ACPI: SLIC 00000000bffa0450 000176 (v01 ACRSYS ACRPRDCT 20090226 MSFT 00000097)
ACPI: WDRT 00000000bffa05d0 000047 (v01 022609 NV-WDRT 20090226 MSFT 00000097)
ACPI: OEMB 00000000bffae040 000071 (v01 022609 OEMB1953 20090226 MSFT 00000097)
ACPI: HPET 00000000bffa6a90 000038 (v01 022609 OEMHPET0 20090226 MSFT 00000097)
ACPI: NVHD 00000000bffae0c0 000554 (v01 022609 NVHDCP 20090226 MSFT 00000097)
ACPI: AWMI 00000000bffae620 00004E (v01 022609 OEMB1953 20090226 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xbff9ffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1048379
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12223 pages used for memmap
DMA32 zone: 782240 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Intel MultiProcessor Specification v1.1
MPTABLE: OEM ID: nVidia
MPTABLE: Product ID: MCP73
MPTABLE: APIC at: 0xFEE00000
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
Processors: 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbffa0000-0xbffadfff]
PM: Registered nosave memory: [mem 0xbffae000-0xbffdffff]
PM: Registered nosave memory: [mem 0xbffe0000-0xbffedfff]
PM: Registered nosave memory: [mem 0xbffee000-0xbffeffff]
PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s87040 r8192 d23552 u524288
pcpu-alloc: s87040 r8192 d23552 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031975
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4046360K/4193516K available (5231K kernel code, 858K rwdata, 1632K rodata, 1120K init, 1288K bss, 147156K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2399.965 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.92 BogoMIPS (lpj=7999883)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0ca0)
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
ftrace: allocating 20032 entries in 79 pages
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19207.70 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbffae000-0xbffdffff] (204800 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:13:54, date: 06/18/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [10de:07c1] type 00 class 0x060000
pci 0000:00:00.1: [10de:07cb] type 00 class 0x050000
pci 0000:00:01.0: [10de:07cd] type 00 class 0x050000
pci 0000:00:01.1: [10de:07ce] type 00 class 0x050000
pci 0000:00:01.2: [10de:07cf] type 00 class 0x050000
pci 0000:00:01.3: [10de:07d0] type 00 class 0x050000
pci 0000:00:01.4: [10de:07d1] type 00 class 0x050000
pci 0000:00:01.5: [10de:07d2] type 00 class 0x050000
pci 0000:00:01.6: [10de:07d3] type 00 class 0x050000
pci 0000:00:02.0: [10de:07d6] type 00 class 0x050000
pci 0000:00:03.0: [10de:07d7] type 00 class 0x060100
pci 0000:00:03.0: reg 0x10: [io 0x4f00-0x4fff]
pci 0000:00:03.1: [10de:07d8] type 00 class 0x0c0500
pci 0000:00:03.1: reg 0x10: [io 0x4900-0x493f]
pci 0000:00:03.1: reg 0x20: [io 0x4d00-0x4d3f]
pci 0000:00:03.1: reg 0x24: [io 0x4e00-0x4e3f]
pci 0000:00:03.1: PME# supported from D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:03.2: [10de:07d9] type 00 class 0x050000
pci 0000:00:03.3: [10de:07da] type 00 class 0x0b4000
pci 0000:00:03.3: reg 0x10: [mem 0xf9e80000-0xf9efffff]
pci 0000:00:03.4: [10de:07c8] type 00 class 0x050000
pci 0000:00:04.0: [10de:07fe] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xf9e7f000-0xf9e7ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:056a] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xf9e7ec00-0xf9e7ecff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:056c] type 00 class 0x01018a
pci 0000:00:08.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:09.0: [10de:07fc] type 00 class 0x040300
pci 0000:00:09.0: reg 0x10: [mem 0xf9e78000-0xf9e7bfff]
pci 0000:00:09.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [10de:056d] type 01 class 0x060401
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:056e] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:056f] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:056f] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:0e.0: [10de:07f8] type 00 class 0x010485
pci 0000:00:0e.0: reg 0x10: [io 0xc480-0xc487]
pci 0000:00:0e.0: reg 0x14: [io 0xc400-0xc403]
pci 0000:00:0e.0: reg 0x18: [io 0xc080-0xc087]
pci 0000:00:0e.0: reg 0x1c: [io 0xc000-0xc003]
pci 0000:00:0e.0: reg 0x20: [io 0xbc00-0xbc0f]
pci 0000:00:0e.0: reg 0x24: [mem 0xf9e7c000-0xf9e7dfff]
pci 0000:00:0f.0: [10de:07dc] type 00 class 0x020000
pci 0000:00:0f.0: reg 0x10: [mem 0xf9e73000-0xf9e73fff]
pci 0000:00:0f.0: reg 0x14: [io 0xb880-0xb887]
pci 0000:00:0f.0: reg 0x18: [mem 0xf9e7e800-0xf9e7e8ff]
pci 0000:00:0f.0: reg 0x1c: [mem 0xf9e7e400-0xf9e7e40f]
pci 0000:00:0f.0: supports D1 D2
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: System wakeup disabled by ACPI
pci 0000:01:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:01:07.0: reg 0x10: [mem 0xf9fff800-0xf9ffffff]
pci 0000:01:07.0: reg 0x14: [io 0xdc00-0xdc7f]
pci 0000:01:07.0: supports D2
pci 0000:01:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:0a.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:0a.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [10de:0615] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f]
pci 0000:02:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfebfffff]
pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs *7 10 11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs *7 10 11 14)
ACPI: PCI Interrupt Link [SGRU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs *7 10 11 14)
ACPI: PCI Interrupt Link [LSA0] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0x4000-0x407f] has been reserved
system 00:04: [io 0x4080-0x40ff] has been reserved
system 00:04: [io 0x4400-0x447f] has been reserved
system 00:04: [io 0x4480-0x44ff] has been reserved
system 00:04: [io 0x4800-0x487f] has been reserved
system 00:04: [io 0x4880-0x48ff] has been reserved
system 00:04: [io 0x4900-0x493f] has been reserved
system 00:04: [io 0x4c00-0x4c7f] has been reserved
system 00:04: [io 0x4c80-0x4cff] has been reserved
system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
system 00:04: [mem 0xfec80000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed45000-0x1fd93ffff] could not be reserved
system 00:04: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] has been reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:0a: [io 0x0a00-0x0a0f] has been reserved
system 00:0a: [io 0x0a10-0x0a1f] has been reserved
system 00:0a: [io 0x0a20-0x0a2f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:00:0a.0: PCI bridge to [bus 01]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfebfffff]
pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3224K (ffff8800379a4000 - ffff880037cca000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbfa0000-0xbffa0000] (64MB) mapped at [ffff8800bbfa0000-ffff8800bff9ffff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7909
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
registered taskstats version 1
Magic number: 2:112:235
rtc_cmos 00:06: setting system clock to 2014-06-18 15:13:54 UTC (1403104434)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
random: systemd-tmpfile urandom read with 1 bits of entropy available
systemd-udevd[59]: starting version 213
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 64 is not supported
ehci-pci 0000:00:04.1: irq 11, io mem 0xf9e7ec00
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
libata version 3.00 loaded.
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:04.0: irq 10, io mem 0xf9e7f000
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
firewire_ohci 0000:01:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
pata_amd 0000:00:08.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ahci 0000:00:0e.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf9e7c000 port 0xf9e7c100 irq 5
ata4: SATA max UDMA/133 abar m8192@0xf9e7c000 port 0xf9e7c180 irq 5
ata5: SATA max UDMA/133 abar m8192@0xf9e7c000 port 0xf9e7c200 irq 5
ata6: SATA max UDMA/133 abar m8192@0xf9e7c000 port 0xf9e7c280 irq 5
ata2: port disabled--ignoring
usb 1-3: new high-speed USB device number 2 using ehci-pci
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: WDC WD6400AAKS-22A7B0, 01.03B01, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: ATA-8: WDC WD10EARS-22Y5B1, 80.00A80, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
ata5.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA WDC WD10EARS-22Y 80.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
firewire_core 0000:01:07.0: created device fw0: GUID 00dc100054d27601, S400
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-9: new high-speed USB device number 3 using ehci-pci
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 < sdb5 sdb6 sdb7 > sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2399.960 MHz
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-9:1.0
usbcore: registered new interface driver usb-storage
random: nonblocking pool is initialized
scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
floppy0: no floppy controllers found
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 213 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Set hostname to .
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Login Prompts.
systemd[1]: Reached target Login Prompts.
systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Expecting device sys-subsystem-net-devices-vboxnet0.device...
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Expecting device dev-sda5.device...
systemd[1]: Expecting device dev-sda7.device...
systemd[1]: Expecting device dev-sdb7.device...
systemd[1]: Expecting device dev-sdb2.device...
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting system-dhcpcd.slice.
systemd[1]: Created slice system-dhcpcd.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
EXT4-fs (sdb5): re-mounted. Opts: (null)
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1dd offMax=0x6363
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.12_OSE (interface 0x001a0007).
systemd-udevd[179]: starting version 213
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input4
Floppy drive(s): fd0 is 1.44M
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (16 C)
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[drm] Initialized drm 1.1.0 20060810
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ppdev: user-space parallel port driver
forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:21:85:cf:01:eb
forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x4d00
i2c i2c-1: nForce2 SMBus adapter at 0x4e00
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 7
hda_intel: Disabling MSI
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 10
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.25 Tue May 27 11:05:28 PDT 2014
hda_codec: ALC1200: SKU not ready 0x411111f0
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
mousedev: PS/2 mouse device common for all mice
Adding 1992024k swap on /dev/sda5. Priority:-1 extents:1 across:1992024k FS
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.0/input/input6
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Trust Webcam (0c45:62c0)
input: Trust Webcam as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
fuse init (API version 7.22)
input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:09.0/sound/card0/input16
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input15
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input14
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input13
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input12
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input11
input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input10
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input9
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
floppy0: no floppy controllers found
EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: errors=remount-ro
systemd-journald[155]: Received request to flush runtime journal from PID 1
forcedeth 0000:00:0f.0: irq 43 for MSI/MSI-X
forcedeth 0000:00:0f.0 eth0: MSI enabled
nvidia 0000:02:00.0: irq 44 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
usb 2-4: new full-speed USB device number 2 using ohci-pci
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 2 ports detected
usb 2-4.1: new full-speed USB device number 3 using ohci-pci
usb 2-4.2: new full-speed USB device number 4 using ohci-pci
usblp 2-4.2:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043D pid 0x007B
usbcore: registered new interface driver usblp
Installing knfsd (copyright (C) 1996 [email protected]).
NFSD: starting 90-second grace period (net ffffffff818a13c0)
usb 1-1: new high-speed USB device number 5 using ehci-pci
perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
usb 1-9: reset high-speed USB device number 3 using ehci-pci