dmesg - uno
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-29-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 (Ubuntu 3.13.0-29.53-generic 3.13.11.2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fe8ffff] usable
BIOS-e820: [mem 0x000000007fe90000-0x000000007fe99fff] ACPI data
BIOS-e820: [mem 0x000000007fe9a000-0x000000007fefffff] ACPI NVS
BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Acer Aspire 5100 /Navarro, BIOS V3.05A 05/16/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7fe90 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f8110-0x000f811f] mapped at [ffff8800000f8110]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[mem 0x7c000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7fe8ffff]
[mem 0x7fe00000-0x7fe8ffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
RAMDISK: [mem 0x35b84000-0x36db9fff]
ACPI: RSDP 00000000000f8040 000014 (v00 ACRSYS)
ACPI: RSDT 000000007fe91c50 000038 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
ACPI: FACP 000000007fe99c5e 000074 (v01 ATI Bowfin 06040000 ATI 000F4240)
ACPI: DSDT 000000007fe91c88 007FD6 (v01 Acer Navarro 06040000 MSFT 03000000)
ACPI: FACS 000000007fe9afc0 000040
ACPI: SLIC 000000007fe99cd2 000176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
ACPI: APIC 000000007fe99e48 000046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 000000007fe99e8e 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: SSDT 000000007fe99eca 000136 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fe8ffff]
Initmem setup node 0 [mem 0x00000000-0x7fe8ffff]
NODE_DATA [mem 0x7fe8b000-0x7fe8ffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x7fe8ffff]
On node 0 totalpages: 523820
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8123 pages used for memmap
DMA32 zone: 519824 pages, LIFO batch:31
SB4X0 revision 0x83
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86336 r8192 d24256 u2097152
pcpu-alloc: s86336 r8192 d24256 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515612
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ bd86000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2027120K/2095280K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 68160K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0.
NR_IRQS:16640 nr_irqs:256 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.698 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.39 BogoMIPS (lpj=8778792)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 007ff00000
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28463 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: AMD Turion(tm) 64 Mobile Technology MK-38 (fam: 0f, model: 4c, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (4389.39 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7fe9a000-0x7fefffff] (417792 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 9:08:32, date: 06/15/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, fffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [80000000, dfffffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x80000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d5fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000e1fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000e2000-0x000e3fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xdfff] (ignored)
acpi PNP0A03:00: host bridge window [io 0xe030-0xffff] (ignored)
PCI: root bus 00: hardware-probed resources
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-07] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
pci 0000:00:00.0: [1002:5950] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a34] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1002:5a36] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [1002:4379] type 00 class 0x01018f
pci 0000:00:12.0: reg 0x10: [io 0x8440-0x8447]
pci 0000:00:12.0: reg 0x14: [io 0x8434-0x8437]
pci 0000:00:12.0: reg 0x18: [io 0x8438-0x843f]
pci 0000:00:12.0: reg 0x1c: [io 0x8430-0x8433]
pci 0000:00:12.0: reg 0x20: [io 0x8400-0x840f]
pci 0000:00:12.0: reg 0x24: [mem 0xc0004000-0xc00041ff]
pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.0: [1002:4374] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xc0005000-0xc0005fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4375] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xc0006000-0xc0006fff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4373] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xc0007000-0xc0007fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4372] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io 0x8410-0x841f]
pci 0000:00:14.0: reg 0x14: [mem 0x00000000-0x000003ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: [1002:4376] type 00 class 0x010182
pci 0000:00:14.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:14.1: reg 0x18: [io 0x8450-0x8457]
pci 0000:00:14.1: reg 0x1c: [io 0x8448-0x844b]
pci 0000:00:14.1: reg 0x20: [io 0x8420-0x842f]
pci 0000:00:14.2: [1002:437b] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xc0000000-0xc0003fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:4377] type 00 class 0x060100
pci 0000:00:14.4: [1002:4371] type 01 class 0x060401
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [1002:7149] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0x9000-0x90ff]
pci 0000:01:00.0: reg 0x18: [mem 0xc0100000-0xc010ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:02.0: bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:02.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:04.0: PCI bridge to [bus 02-03]
pci 0000:00:04.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
acpiphp: Slot [1-1] registered
pci 0000:04:00.0: [14e4:4311] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xc0200000-0xc0203fff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 04-05]
pci 0000:00:05.0: bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:06:01.0: [10ec:8139] type 00 class 0x020000
pci 0000:06:01.0: reg 0x10: [io 0xa000-0xa0ff]
pci 0000:06:01.0: reg 0x14: [mem 0xc0300000-0xc03000ff]
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:01.0: System wakeup disabled by ACPI
pci 0000:06:04.0: [1524:1412] type 02 class 0x060700
pci 0000:06:04.0: reg 0x10: [mem 0xc0301000-0xc0301fff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.1: [1524:0530] type 00 class 0x050100
pci 0000:06:04.1: reg 0x10: [mem 0xc0300400-0xc030047f]
pci 0000:06:04.1: supports D1 D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.2: [1524:0550] type 00 class 0x080501
pci 0000:06:04.2: reg 0x10: [mem 0xc0300800-0xc03008ff]
pci 0000:06:04.2: supports D1 D2
pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.3: [1524:0520] type 00 class 0x050100
pci 0000:06:04.3: reg 0x10: [mem 0xc0300c00-0xc0300c7f]
pci 0000:06:04.3: supports D1 D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.4: [1524:0551] type 00 class 0x050100
pci 0000:06:04.4: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:06:04.4: supports D1 D2
pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.4: PCI bridge to [bus 06-08] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xc0300000-0xc03fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-08] (conflicts with (null) [bus 06-08])
pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fe90000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN0701 SYN0700 SYN0002 PNP0f13 (active)
system 00:07: [io 0x1080] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x8000-0x805f] could not be reserved
system 00:07: [io 0x8100-0x81ff window] has been reserved
system 00:07: [io 0x0f40-0x0f47] has been reserved
system 00:07: [io 0x0280-0x0293] has been reserved
system 00:07: [io 0x087f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:08: disabling [mem 0x00000000-0x00000fff disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-03] add_size 200000
pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-03] add_size 200000
pci 0000:00:05.0: bridge window [io 0x1000-0x0fff] to [bus 04-05] add_size 1000
pci 0000:00:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-05] add_size 200000
pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-08] add_size 4000000
pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:05.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:00:04.0: BAR 14: assigned [mem 0x84000000-0x841fffff]
pci 0000:00:04.0: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
pci 0000:00:05.0: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
pci 0000:00:12.0: BAR 6: assigned [mem 0x84600000-0x8467ffff pref]
pci 0000:00:04.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:05.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:14.0: BAR 1: assigned [mem 0x84680000-0x846803ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:02.0: bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:02.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-03]
pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:04.0: bridge window [mem 0x84000000-0x841fffff]
pci 0000:00:04.0: bridge window [mem 0x84200000-0x843fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 04-05]
pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:05.0: bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:05.0: bridge window [mem 0x84400000-0x845fffff 64bit pref]
pci 0000:06:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:06:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:06:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:06:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:06:04.0: BAR 13: assigned [io 0xa400-0xa4ff]
pci 0000:06:04.0: BAR 14: assigned [io 0xa800-0xa8ff]
pci 0000:06:04.4: BAR 0: assigned [mem 0xc0300100-0xc03001ff]
pci 0000:06:04.0: CardBus bridge to [bus 07]
pci 0000:06:04.0: bridge window [io 0xa400-0xa4ff]
pci 0000:06:04.0: bridge window [io 0xa800-0xa8ff]
pci 0000:06:04.0: bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:06:04.0: bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:14.4: PCI bridge to [bus 06-08]
pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
pci 0000:00:14.4: bridge window [mem 0xc0300000-0xc03fffff]
pci 0000:00:14.4: bridge window [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x84000000-0x841fffff]
pci_bus 0000:02: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xc0200000-0xc02fffff]
pci_bus 0000:04: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xc0300000-0xc03fffff]
pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
pci_bus 0000:06: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 6 [mem 0x80000000-0xfcffffffff]
pci_bus 0000:07: resource 0 [io 0xa400-0xa4ff]
pci_bus 0000:07: resource 1 [io 0xa800-0xa8ff]
pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18648K (ffff880035b84000 - ffff880036dba000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1402823311.839:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 3995
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:04.0: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc8000000, mapped to 0xffffc90000c00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
ACPI: Invalid active0 threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xc0007000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:13.0: irq 19, io mem 0xc0005000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-29-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.1: irq 19, io mem 0xc0006000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-29-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6602cb36f1313bea01c4bda96567cfa723c970d8'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:145:121
rtc_cmos 00:03: setting system clock to 2014-06-15 09:08:33 UTC (1402823313)
ACPI Warning: \_PR_.CPU0._PSD: Return Package has no elements (empty) (20131115/nsprepkg-126)
ACPI: Invalid _PSD data
powernow-k8: fid 0xe (2200 MHz), vid 0xd
powernow-k8: fid 0xc (2000 MHz), vid 0xf
powernow-k8: fid 0xa (1800 MHz), vid 0x11
powernow-k8: fid 0x8 (1600 MHz), vid 0x13
powernow-k8: fid 0x0 (800 MHz), vid 0x18
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-38 (1 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
systemd-udevd[91]: starting version 204
sata_sil 0000:00:12.0: version 2.4
sata_sil 0000:00:12.0: enabling device (0005 -> 0007)
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc0004080 irq 22
ata2: SATA max UDMA/100 mmio m512@0xc0004000 tf 0xc00040c0 irq 22
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:06:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
sdhci-pci 0000:06:04.2: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:06:04.2: dummy supplies not allowed
mmc0: no vmmc regulator found
8139too: 8139too Fast Ethernet driver 0.9.28
mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
sdhci-pci 0000:06:04.4: dummy supplies not allowed
mmc1: no vqmmc regulator found
sdhci-pci 0000:06:04.4: dummy supplies not allowed
mmc1: no vmmc regulator found
mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
8139too 0000:06:01.0 eth0: RealTek RTL8139 at 0x000000000001a000, 00:16:d4:d6:55:9d, IRQ 21
ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
usb 2-4: new full-speed USB device number 2 using ohci-pci
ata1.00: ATA-8: ST9320325AS, 0001SDM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-4: New USB device found, idVendor=062a, idProduct=4101
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: 2.4G Keyboard Mouse
usb 2-4: Manufacturer: MOSART Semi.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.0/input/input13
hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:13.0-4/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-4/2-4:1.1/input/input14
hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:13.0-4/input1
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0, board id: 3655, fw id: 235996
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
ata2: SATA link down (SStatus 0 SControl 310)
scsi2 : pata_atiixp
scsi3 : pata_atiixp
ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
ata3.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.00, max UDMA/33
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
random: nonblocking pool is initialized
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Adding 977532k swap on /dev/sda2. Priority:-1 extents:1 across:977532k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[267]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[drm] Initialized drm 1.1.0 20060810
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/LNXVIDEO:01/input/input15
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:009f]
yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
yenta_cardbus 0000:06:04.0: Socket status: 30000006
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xc0300000-0xc03fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0300000-0xc03fffff:
excluding 0xc0300000-0xc030ffff
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
excluding 0x80000000-0x83ffffff
[drm] radeon kernel modesetting enabled.
checking generic (c8000000 300000) vs hw (c8000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV515 0x1002:0x7149 0x1025:0x009F).
[drm] register mmio base: 0xC0100000
[drm] register mmio size: 65536
ATOM BIOS: BR24877
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 1024328 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0xffff88007950e000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R500 Microcode
kvm: Nested Virtualization enabled
b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[drm] radeon: ring at 0x0000000008001000
[drm] ring test succeeded in 10 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[drm] Encoders:
[drm] LCD1: INTERNAL_LVTM1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Possible lm63 thermal controller at 0x4c
[drm] radeon: power management initialized
b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
Broadcom 43xx driver loaded [ Features: PNL ]
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Device: 0x21
acer_wmi: Disabling ACPI video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input16
SKU: Nid=0x1d sku_cfg=0x4015130d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000005
SKU: customization=0x00000013
SKU: external_amp=0x1
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4015130d for NID 0x1d
realtek: Enabling init ASM_ID=0x130d CODEC_ID=10ec0883
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
systemd-udevd[371]: failed to execute '/usr/sbin/alsactl' '/usr/sbin/alsactl -E HOME=/var/run/alsa restore 0': No such file or directory
[drm] fb mappable at 0xC80C0000
[drm] vram apper at 0xC8000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Console: switching to colour frame buffer device 160x50
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
type=1400 audit(1402808923.729:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=386 comm="apparmor_parser"
type=1400 audit(1402808923.729:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=386 comm="apparmor_parser"
type=1400 audit(1402808923.729:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
type=1400 audit(1402808923.729:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=386 comm="apparmor_parser"
type=1400 audit(1402808923.733:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=386 comm="apparmor_parser"
type=1400 audit(1402808923.733:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=321 comm="apparmor_parser"
type=1400 audit(1402808923.733:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=321 comm="apparmor_parser"
type=1400 audit(1402808923.733:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=321 comm="apparmor_parser"
type=1400 audit(1402808923.733:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=321 comm="apparmor_parser"
type=1400 audit(1402808923.733:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=321 comm="apparmor_parser"
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (571) killed by TERM signal
audit_printk_skb: 24 callbacks suppressed
type=1400 audit(1402808930.581:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=667 comm="apparmor_parser"
type=1400 audit(1402808930.581:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=667 comm="apparmor_parser"
type=1400 audit(1402808930.581:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=667 comm="apparmor_parser"
type=1400 audit(1402808930.585:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=668 comm="apparmor_parser"
type=1400 audit(1402808930.585:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=668 comm="apparmor_parser"
type=1400 audit(1402808930.585:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=668 comm="apparmor_parser"
type=1400 audit(1402808930.585:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=668 comm="apparmor_parser"
type=1400 audit(1402808930.585:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=668 comm="apparmor_parser"
type=1400 audit(1402808930.585:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=668 comm="apparmor_parser"
type=1400 audit(1402808931.717:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=669 comm="apparmor_parser"
init: cups main process (778) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit_printk_skb: 84 callbacks suppressed
type=1400 audit(1402808937.017:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=930 comm="apparmor_parser"
init: samba-ad-dc main process (888) terminated with status 1
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
8139too 0000:06:01.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
type=1400 audit(1402808963.496:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1670 comm="apparmor_parser"
type=1400 audit(1402808963.496:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1670 comm="apparmor_parser"
type=1400 audit(1402808963.496:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1670 comm="apparmor_parser"
wlan0: authenticate with bc:f6:85:47:8c:5c
wlan0: send auth to bc:f6:85:47:8c:5c (try 1/3)
wlan0: authenticated
wlan0: associate with bc:f6:85:47:8c:5c (try 1/3)
wlan0: RX AssocResp from bc:f6:85:47:8c:5c (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
type=1400 audit(1402810098.546:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3100 comm="apparmor_parser"
type=1400 audit(1402810098.546:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3100 comm="apparmor_parser"
type=1400 audit(1402810098.546:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3100 comm="apparmor_parser"
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
ptrace of pid 28042 was attempted by: strace (pid 28754)