dmesg - y
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009e041fff] usable
BIOS-e820: [mem 0x000000009e042000-0x000000009e071fff] reserved
BIOS-e820: [mem 0x000000009e072000-0x000000009e0c2fff] usable
BIOS-e820: [mem 0x000000009e0c3000-0x000000009e183fff] ACPI NVS
BIOS-e820: [mem 0x000000009e184000-0x000000009edb3fff] reserved
BIOS-e820: [mem 0x000000009edb4000-0x000000009edb4fff] usable
BIOS-e820: [mem 0x000000009edb5000-0x000000009edbcfff] ACPI NVS
BIOS-e820: [mem 0x000000009edbd000-0x000000009ef0bfff] usable
BIOS-e820: [mem 0x000000009ef0c000-0x000000009f332fff] reserved
BIOS-e820: [mem 0x000000009f333000-0x000000009f370fff] usable
BIOS-e820: [mem 0x000000009f371000-0x000000009f6f1fff] reserved
BIOS-e820: [mem 0x000000009f6f2000-0x000000009f6fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Micro-Star International Co., Ltd. S12T 3M/S12 3M/MS-124K, BIOS E124KAMS.10A 11/27/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 base 009F700000 mask FFFFF00000 uncachable
3 base 009F800000 mask FFFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2551MB, range: 1MB, type UC
reg 3, base: 2552MB, range: 8MB, type UC
total RAM covered: 2551M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2551MB, range: 1MB, type UC
reg 3, base: 2552MB, range: 8MB, type UC
e820: update [mem 0x9f700000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f700 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd600-0x000fd60f] mapped at [ffff8800000fd600]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[mem 0x13ee00000-0x13effffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13edfffff]
[mem 0x13c000000-0x13edfffff] page 2M
init_memory_mapping: [mem 0x100001000-0x13bffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13bffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x9e041fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9dffffff] page 2M
[mem 0x9e000000-0x9e041fff] page 4k
init_memory_mapping: [mem 0x9e072000-0x9e0c2fff]
[mem 0x9e072000-0x9e0c2fff] page 4k
init_memory_mapping: [mem 0x9edb4000-0x9edb4fff]
[mem 0x9edb4000-0x9edb4fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x9edbd000-0x9ef0bfff]
[mem 0x9edbd000-0x9ef0bfff] page 4k
init_memory_mapping: [mem 0x9f333000-0x9f370fff]
[mem 0x9f333000-0x9f370fff] page 4k
init_memory_mapping: [mem 0x9f6f2000-0x9f6fffff]
[mem 0x9f6f2000-0x9f6fffff] page 4k
RAMDISK: [mem 0x34d22000-0x36688fff]
ACPI: RSDP 00000000000f0490 00024 (v02 MSI_NB)
ACPI: XSDT 000000009e145080 0007C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FACP 000000009e14bb20 0010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
ACPI: DSDT 000000009e145190 0698D (v02 MSI_NB MEGABOOK 00000000 INTL 20051117)
ACPI: FACS 000000009e17a080 00040
ACPI: APIC 000000009e14bc30 0007E (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FPDT 000000009e14bcb0 00044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: MCFG 000000009e14bcf8 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00010013)
ACPI: HPET 000000009e14bd38 00038 (v01 MSI_NB MEGABOOK 01072009 AMI 00000005)
ACPI: MSFF 000000009e14bd70 00029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
ACPI: SSDT 000000009e14bda0 0043C (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 000000009e14c1e0 046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: CRAT 000000009e1508b8 00200 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 000000009e150ab8 013CA (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 000000009e151e88 010E8 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013effffff]
Initmem setup node 0 [mem 0x00000000-0x13effffff]
NODE_DATA [mem 0x13eff6000-0x13effafff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x9e041fff]
node 0: [mem 0x9e072000-0x9e0c2fff]
node 0: [mem 0x9edb4000-0x9edb4fff]
node 0: [mem 0x9edbd000-0x9ef0bfff]
node 0: [mem 0x9f333000-0x9f370fff]
node 0: [mem 0x9f6f2000-0x9f6fffff]
node 0: [mem 0x100001000-0x13effffff]
On node 0 totalpages: 905675
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10057 pages used for memmap
DMA32 zone: 643631 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 258047 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x04] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 4, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9e042000-0x9e071fff]
PM: Registered nosave memory: [mem 0x9e0c3000-0x9e183fff]
PM: Registered nosave memory: [mem 0x9e184000-0x9edb3fff]
PM: Registered nosave memory: [mem 0x9edb5000-0x9edbcfff]
PM: Registered nosave memory: [mem 0x9ef0c000-0x9f332fff]
PM: Registered nosave memory: [mem 0x9f371000-0x9f6f1fff]
PM: Registered nosave memory: [mem 0x9f700000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0x9f700000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88013ec00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 891501
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 94000000
PM: Registered nosave memory: [mem 0x94000000-0x97ffffff]
Memory: 3390696K/3622700K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 232004K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 998.172 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.34 BogoMIPS (lpj=3992688)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 009f700000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD E1-2100 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (3992.68 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9e0c3000-0x9e183fff] (790528 bytes)
PM: Registering ACPI NVS region [mem 0x9edb5000-0x9edbcfff] (32768 bytes)
regulator-dummy: no parameters
RTC time: 22:41:05, date: 05/29/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x19) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
pci 0000:00:01.0: [1002:9834] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb6f000-0xfeb6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6b000-0xfeb6b0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff 64bit]
pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8723] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 01]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe93ffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.4: bridge window [mem 0xfe900000-0xfe9fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9e042000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e0c3000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9edb5000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ef0c000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f371000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f700000-0x9fffffff]
e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs ETD0300 SYN1507 ETD0001 PNP0f13 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] could not be reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.3: PCI bridge to [bus 01]
pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.4: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26012K (ffff880034d22000 - ffff880036689000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9a042000-0x9e042000] (64MB) mapped at [ffff88009a042000-ffff88009e041fff]
perf: AMD NB counters detected
perf: AMD L2I counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1401403266.792:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 6673
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (50 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6b000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:640:705
rtc_cmos 00:04: setting system clock to 2014-05-29 22:41:07 UTC (1401403267)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[105]: starting version 204
video: module verification failed: signature and/or required key missing - tainting kernel
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:10: registered as cooling_device2
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
wmi: Mapper loaded
ahci 0000:00:11.0: version 3.0
ohci-pci: OHCI PCI platform driver
ahci 0000:00:11.0: irq 75 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:42:f9:79]
scsi0 : ahci
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
scsi1 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f100 irq 75
ata2: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f180 irq 75
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6e000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:12.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6c000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
usb 1-4: new high-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-4: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: USB2.0 WLAN
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 998.128 MHz
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=3538, idProduct=0902
usb 3-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
usb 3-1: Product: pqi Portable HDD H560
usb 3-1: Manufacturer: pqi Portable HDD H560
usb 3-1: SerialNumber: 112F0FFFFFFF
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi2 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
usb 5-2: new full-speed USB device number 2 using ohci-pci
usb 5-2: New USB device found, idVendor=13d3, idProduct=3394
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: RT Bluetooth Radio
usb 5-2: Manufacturer: Realtek
usb 5-2: SerialNumber: 00e04c000001
usb 6-1: new low-speed USB device number 2 using ohci-pci
Switched to clocksource tsc
usb 6-1: New USB device found, idVendor=09da, idProduct=000a
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Mouse
usb 6-1: Manufacturer: A4Tech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.0/input/input6
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:13.0-1/input0
scsi 2:0:0:0: Direct-Access TOSHIBA MK6459GSXP PQ: 0 ANSI: 2 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI disk
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010880000, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 3620860k swap on /dev/sda5. Priority:-1 extents:1 across:3620860k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[350]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
cfg80211: Calling CRDA to update world regulatory domain
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
MCE: In-kernel MCE decoding enabled.
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
device-mapper: multipath: version 1.5.1 loaded
hda-intel 0000:00:01.1: Using LPIB position fix
snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X
microcode: CPU0: patch_level=0x0700010b
hda-intel 0000:00:01.1: Enable sync_write for stable communication
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4047992d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x00000099
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x19
Mic=0x18
realtek: No valid SSID, checking pincfg 0x4047992d for NID 0x1d
realtek: Enabling init ASM_ID=0x992d CODEC_ID=10ec0269
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
input: MSI WMI hotkeys as /devices/virtual/input/input10
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
microcode: CPU1: patch_level=0x0700010b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
psmouse serio1: elantech: Synaptics capabilities query result 0x59, 0x15, 0x0c.
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy1: Atheros AR9271 Rev:1
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3188 MBytes.
[fglrx] vendor: 1002 device: 9834 count: 1
[fglrx] ioport: bar 4, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.10.2 [May 5 2014] with 1 minors
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (798) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
alx 0000:02:00.0: irq 77 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with b0:48:7a:fa:d8:e8
wlan1: send auth to b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: authenticated
wlan1: associate with b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: RX AssocResp from b0:48:7a:fa:d8:e8 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
fglrx_pci 0000:00:01.0: irq 78 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1270
[fglrx] Firegl kernel thread PID: 1271
[fglrx] Firegl kernel thread PID: 1272
[fglrx] IRQ 78 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc0d000, size:3000
[fglrx] Reserved FB block: Unshared offset:fc10000, size:3f0000
[fglrx] Reserved FB block: Unshared offset:1ffde000, size:22000
[fglrx] ATIF platform detected with notification ID: 0x81
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff880139089bb8), AE_AML_INFINITE_LOOP (20130517/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff8801390899b0), AE_AML_INFINITE_LOOP (20130517/psparse-536)
usb 1-4: USB disconnect, device number 3
wlan1: deauthenticating from b0:48:7a:fa:d8:e8 by local choice (reason=3)
ath: phy1: RX failed to go idle in 10 ms RXSM=0x0
ath: phy1: Failed to wakeup in 500us
ath: phy1: RX failed to go idle in 10 ms RXSM=0x0
ath: phy1: Failed to wakeup in 500us
ath: phy1: RX failed to go idle in 10 ms RXSM=0xc0f1e138
ath: phy1: Failed to wakeup in 500us
ath: phy1: RX failed to go idle in 10 ms RXSM=0xc0f1e138
cfg80211: Calling CRDA to update world regulatory domain
usb 1-4: ath9k_htc: USB layer deinitialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 1-4: new high-speed USB device number 4 using ehci-pci
usb 1-4: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: USB2.0 WLAN
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy2: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with b0:48:7a:fa:d8:e8
wlan1: send auth to b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: authenticated
wlan1: associate with b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: RX AssocResp from b0:48:7a:fa:d8:e8 (capab=0x431 status=0 aid=1)
wlan1: associated
systemd-timedated[3537]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
wlan1: deauthenticating from b0:48:7a:fa:d8:e8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: direct probe to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: direct probe to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with b0:48:7a:fa:d8:e8
wlan1: send auth to b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: authenticated
wlan1: associate with b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: RX AssocResp from b0:48:7a:fa:d8:e8 (capab=0x431 status=0 aid=1)
wlan1: associated
wlan1: deauthenticating from b0:48:7a:fa:d8:e8 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
systemd-hostnamed[3924]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with b0:48:7a:fa:d8:e8
wlan1: send auth to b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: authenticated
wlan1: associate with b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: RX AssocResp from b0:48:7a:fa:d8:e8 (capab=0x431 status=0 aid=1)
wlan1: associated
usb 1-4: USB disconnect, device number 4
wlan1: deauthenticating from b0:48:7a:fa:d8:e8 by local choice (reason=3)
ath: phy2: Chip reset failed
ath: phy2: Unable to reset channel (2427 Mhz) reset status -22
ath: phy2: Unable to set channel
ath: phy2: RX failed to go idle in 10 ms RXSM=0x0
ath: phy2: Failed to wakeup in 500us
ath: phy2: RX failed to go idle in 10 ms RXSM=0x0
ath: phy2: Failed to wakeup in 500us
ath: phy2: RX failed to go idle in 10 ms RXSM=0xc0d1be16
ath: phy2: Failed to wakeup in 500us
ath: phy2: RX failed to go idle in 10 ms RXSM=0xc0d1be16
cfg80211: Calling CRDA to update world regulatory domain
usb 1-4: ath9k_htc: USB layer deinitialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-4: new high-speed USB device number 5 using ehci-pci
usb 1-4: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: USB2.0 WLAN
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy3: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with b0:48:7a:fa:d8:e8
wlan1: send auth to b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: authenticated
wlan1: associate with b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: RX AssocResp from b0:48:7a:fa:d8:e8 (capab=0x431 status=0 aid=1)
wlan1: associated
Watchdog[3205]: segfault at 0 ip 00007fcff8eff62e sp 00007fcfe8e8b640 error 6 in chrome[7fcff4f0e000+4f39000]
Watchdog[4878]: segfault at 0 ip 00007f234bf1362e sp 00007f233be9f640 error 6 in chrome[7f2347f22000+4f39000]
Watchdog[4885]: segfault at 0 ip 00007f8e1959162e sp 00007f8e0951d640 error 6 in chrome[7f8e155a0000+4f39000]
perf samples too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-4: USB disconnect, device number 5
wlan1: deauthenticating from b0:48:7a:fa:d8:e8 by local choice (reason=3)
ath: phy3: Chip reset failed
ath: phy3: Unable to reset channel (2427 Mhz) reset status -22
ath: phy3: Unable to set channel
ath: phy3: Failed to wakeup in 500us
ath: phy3: RX failed to go idle in 10 ms RXSM=0x0
ath: phy3: Failed to wakeup in 500us
ath: phy3: RX failed to go idle in 10 ms RXSM=0xc011a95d
ath: phy3: Failed to wakeup in 500us
ath: phy3: RX failed to go idle in 10 ms RXSM=0xc011a95d
cfg80211: Calling CRDA to update world regulatory domain
usb 1-4: ath9k_htc: USB layer deinitialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
usb 3-1: USB disconnect, device number 2
usb 6-1: USB disconnect, device number 2
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000
[fglrx] IRQ 78 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 578.767 msecs
PM: late suspend of devices complete after 0.554 msecs
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.636 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
LVT offset 0 assigned for vector 0x400
CPU1 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 112.122 msecs
PM: early resume of devices complete after 0.225 msecs
[fglrx] Power up the ASIC
snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X
rtlwifi: wireless switch is on
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 78 Enabled
[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000000, ulEventData = 00000000
dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
PM: Device 00:08 failed to resume: error -19
ata2: SATA link down (SStatus 0 SControl 300)
usb 5-2: reset full-speed USB device number 2 using ohci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2006.930 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:01: Restoring backlight state
alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:42:f9:79]
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
alx 0000:02:00.0: irq 77 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-timedated[5749]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
usb 1-4: new high-speed USB device number 6 using ehci-pci
usb 1-4: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: USB2.0 WLAN
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy4: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: authentication with 78:47:1d:b7:8f:d1 timed out
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: associate with 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: associate with 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: association with 78:47:1d:b7:8f:d1 timed out
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: disassociated from 78:47:1d:b7:8f:d1 (Reason: 2)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: associate with 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: associate with 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: association with 78:47:1d:b7:8f:d1 timed out
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: disassociated from 78:47:1d:b7:8f:d1 (Reason: 2)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=1)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: disassociated from 78:47:1d:b7:8f:d1 (Reason: 2)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Watchdog[6298]: segfault at 0 ip 00007f38c68ca62e sp 00007f38b6856640 error 6 in chrome[7f38c28d9000+4f39000]
Watchdog[6903]: segfault at 0 ip 00007f2dcca3962e sp 00007f2dbc9c5640 error 6 in chrome[7f2dc8a48000+4f39000]
Watchdog[6910]: segfault at 0 ip 00007f4d1c40562e sp 00007f4d0c391640 error 6 in chrome[7f4d18414000+4f39000]
usb 1-4: USB disconnect, device number 6
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
ath: phy4: RX failed to go idle in 10 ms RXSM=0x0
ath: phy4: Failed to wakeup in 500us
ath: phy4: RX failed to go idle in 10 ms RXSM=0x0
ath: phy4: Failed to wakeup in 500us
ath: phy4: RX failed to go idle in 10 ms RXSM=0x0
ath: phy4: Failed to wakeup in 500us
ath: phy4: RX failed to go idle in 10 ms RXSM=0xc071aa40
ath: phy4: Failed to wakeup in 500us
ath: phy4: RX failed to go idle in 10 ms RXSM=0xc071aa40
cfg80211: Calling CRDA to update world regulatory domain
usb 1-4: ath9k_htc: USB layer deinitialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-4: new high-speed USB device number 7 using ehci-pci
usb 1-4: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: USB2.0 WLAN
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy5: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
usb 3-1: new high-speed USB device number 3 using xhci_hcd
usb 3-1: New USB device found, idVendor=3538, idProduct=0902
usb 3-1: New USB device strings: Mfr=10, Product=11, SerialNumber=5
usb 3-1: Product: pqi Portable HDD H560
usb 3-1: Manufacturer: pqi Portable HDD H560
usb 3-1: SerialNumber: 112F0FFFFFFF
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi3 : usb-storage 3-1:1.0
scsi 3:0:0:0: Direct-Access TOSHIBA MK6459GSXP PQ: 0 ANSI: 2 CCS
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI disk
wlan1: disassociated from 78:47:1d:b7:8f:d1 (Reason: 2)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 3/3)
wlan1: authentication with 78:47:1d:b7:8f:d1 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Uhhuh. NMI received for unknown reason 0c on CPU 1.
Do you have a strange power saving mode enabled?
Dazed and confused, but trying to continue
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Uhhuh. NMI received for unknown reason 0c on CPU 1.
Do you have a strange power saving mode enabled?
Dazed and confused, but trying to continue
perf samples too long (5003 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
wlan1: disassociated from 78:47:1d:b7:8f:d1 (Reason: 2)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 78:47:1d:b7:8f:d1
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: send auth to 78:47:1d:b7:8f:d1 (try 2/3)
wlan1: authenticated
ath9k_htc 1-4:1.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
ath9k_htc 1-4:1.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
wlan1: associate with 78:47:1d:b7:8f:d1 (try 1/3)
wlan1: RX AssocResp from 78:47:1d:b7:8f:d1 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
wlan1: disassociated from 78:47:1d:b7:8f:d1 (Reason: 2)
wlan1: deauthenticating from 78:47:1d:b7:8f:d1 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
usb 1-4: USB disconnect, device number 7
ath: phy5: Failed to wakeup in 500us
ath: phy5: RX failed to go idle in 10 ms RXSM=0xc091f507
ath: phy5: Failed to wakeup in 500us
usb 1-4: ath9k_htc: USB layer deinitialized
atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e072 ' to make it known.
[Firmware Bug]: battery: (dis)charge rate invalid.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
[fglrx:firegl_pplib_notify_event] *ERROR* PPLIB: PPLib Notify Event failed!
[fglrx:firegl_pplib_notify_event] *ERROR* ulEventType = 00000002, ulEventData = 00000000
[fglrx] IRQ 78 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 682.007 msecs
PM: late suspend of devices complete after 0.576 msecs
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 63.602 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
LVT offset 0 assigned for vector 0x400
CPU1 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 111.854 msecs
PM: early resume of devices complete after 0.236 msecs
[fglrx] Power up the ASIC
snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X
rtlwifi: wireless switch is on
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 78 Enabled
dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
PM: Device 00:08 failed to resume: error -19
ata2: SATA link down (SStatus 0 SControl 300)
usb 5-2: reset full-speed USB device number 2 using ohci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2373.507 msecs
PM: Finishing wakeup.
usb 3-1: USB disconnect, device number 3
Restarting tasks ... done.
video LNXVIDEO:01: Restoring backlight state
alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:42:f9:79]
alx 0000:02:00.0: irq 77 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 1-4: new high-speed USB device number 8 using ehci-pci
usb 1-4: New USB device found, idVendor=0cf3, idProduct=1006
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: USB2.0 WLAN
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy6: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with b0:48:7a:fa:d8:e8
wlan1: send auth to b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: authenticated
wlan1: associate with b0:48:7a:fa:d8:e8 (try 1/3)
wlan1: RX AssocResp from b0:48:7a:fa:d8:e8 (capab=0x431 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
usb 6-1: new low-speed USB device number 3 using ohci-pci
usb 6-1: New USB device found, idVendor=09da, idProduct=000a
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB Mouse
usb 6-1: Manufacturer: A4Tech
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-1/6-1:1.0/input/input12
a4tech 0003:09DA:000A.0002: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:13.0-1/input0
Buffer I/O error on device sdb1, logical block 78768948
Buffer I/O error on device sdb1, logical block 78768948