dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df7cffff] usable
BIOS-e820: [mem 0x00000000df7d0000-0x00000000df7d2fff] ACPI NVS
BIOS-e820: [mem 0x00000000df7d3000-0x00000000df7effff] ACPI data
BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: ATComputers TRILINE PROFI Q67/H67M-D2-B3, BIOS F4 ZA 05/27/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask FE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf7d0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5790-0x000f579f] mapped at [ffff8800000f5790]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01a9a000, 0x01a9afff] PGTABLE
BRK [0x01a9b000, 0x01a9bfff] PGTABLE
BRK [0x01a9c000, 0x01a9cfff] PGTABLE
init_memory_mapping: [mem 0x11f600000-0x11f7fffff]
[mem 0x11f600000-0x11f7fffff] page 2M
BRK [0x01a9d000, 0x01a9dfff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11f5fffff]
[mem 0x11c000000-0x11f5fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdf7cffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdf5fffff] page 2M
[mem 0xdf600000-0xdf7cffff] page 4k
RAMDISK: [mem 0x36698000-0x37343fff]
ACPI: RSDP 00000000000f6ee0 000014 (v00 ATComp)
ACPI: RSDT 00000000df7d3040 000050 (v01 ATComp GT110301 42302E31 GBTU 01010101)
ACPI: FACP 00000000df7d3100 000074 (v01 ATComp GT110301 42302E31 GBTU 01010101)
ACPI: DSDT 00000000df7d31c0 004A0A (v01 ATCOMP GT110301 00001000 MSFT 04000000)
ACPI: FACS 00000000df7d0000 000040
ACPI: SLIC 00000000df7d7d40 000176 (v01 ATComp GT110301 42302E31 GBTU 01010101)
ACPI: HPET 00000000df7d7f00 000038 (v01 ATComp GT110301 42302E31 GBTU 00000098)
ACPI: MCFG 00000000df7d7f80 00003C (v01 ATComp GT110301 42302E31 GBTU 01010101)
ACPI: ASPT 00000000df7d8000 000034 (v07 ATComp PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 00000000df7d8040 0022F4 (v01 ATComp SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 00000000df7da340 0000C0 (v01 ATComp 00000000 00000000)
ACPI: MATS 00000000df7da400 000034 (v01 ATComp 00000000 00000000)
ACPI: TAMG 00000000df7da470 000442 (v01 ATComp ATCompB0 5455312E BG?? 45240101)
ACPI: APIC 00000000df7d7c40 0000BC (v01 ATComp GT110301 42302E31 GBTU 01010101)
ACPI: SSDT 00000000df7da8c0 001EC8 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011f7fffff]
Initmem setup node 0 [mem 0x00000000-0x11f7fffff]
NODE_DATA [mem 0x11f7f7000-0x11f7fbfff]
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011ae00000-ffff88011e7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdf7cffff]
node 0: [mem 0x100000000-0x11f7fffff]
On node 0 totalpages: 1044332
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12460 pages used for memmap
DMA32 zone: 911312 pages, LIFO batch:31
Normal zone: 1764 pages used for memmap
Normal zone: 129024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf7d0000-0xdf7d2fff]
PM: Registered nosave memory: [mem 0xdf7d3000-0xdf7effff]
PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fffff]
PM: Registered nosave memory: [mem 0xdf800000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdf800000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011f400000 s85824 r8192 d20672 u262144
pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030031
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4026760K/4177328K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 150568K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
NR_IRQS:33024 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2993.363 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.72 BogoMIPS (lpj=11973452)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23946.90 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdf7d0000-0xdf7d2fff] (12288 bytes)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2c] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:1c2e] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:1c2f] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c27] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:1c28] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:1c29] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:1c2a] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [10de:06cd] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf7ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xec000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0be5] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf7d0000-0xdfffffff]
e820: reserve RAM buffer [mem 0x11f800000-0x11fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0400-0x04cf] could not be reserved
system 00:08: [io 0x04d2-0x04ff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x1000-0x107f] has been reserved
system 00:09: [io 0x1080-0x10ff] has been reserved
system 00:09: [io 0x1100-0x117f] has been reserved
system 00:09: [io 0x1180-0x11ff] has been reserved
system 00:09: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:0a: [io 0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x000d0a00-0x000d3fff] has been reserved
system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0xdf7d0000-0xdf7dffff] could not be reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0xdf7cffff] could not be reserved
system 00:0c: [mem 0xdf7e0000-0xdf7effff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0c: [mem 0x40000000-0x400fffff] could not be reserved
system 00:0c: [mem 0xdf800000-0xdfffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff]
pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf41fffff]
pci_bus 0000:02: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xe0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12976K (ffff880036698000 - ffff880037344000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb7d0000-0xdf7d0000] (64MB) mapped at [ffff8800db7d0000-ffff8800df7cffff]
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1401394559.344:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7890
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2014-05-29 20:16:00 UTC (1401394560)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000)
Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
systemd-udevd[68]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: bus type USB registered
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004724000, 50:e5:49:3e:87:2e, XID 0c900800 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
ehci-pci: EHCI PCI platform driver
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
SCSI subsystem initialized
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
libata version 3.00 loaded.
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13-1-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.3
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1a.7: debug port 2
ehci-pci 0000:00:1a.7: cache line size of 4 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1a.7
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
ehci-pci 0000:00:1d.7: debug port 2
ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: EHCI Host Controller
usb usb9: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
usb usb9: SerialNumber: 0000:00:1d.7
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 8 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 42
usb 8-6: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2993.201 MHz
usb 8-6: New USB device found, idVendor=0424, idProduct=2504
usb 8-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-6:1.0: USB hub found
hub 8-6:1.0: 4 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
usb 1-2: new full-speed USB device number 2 using uhci_hcd
usb 1-2: New USB device found, idVendor=054c, idProduct=0268
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: PLAYSTATION(R)3 Controller
usb 1-2: Manufacturer: Sony
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD5001AALS-00F41A0, 01.03B01, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
usb 8-6.3: new full-speed USB device number 4 using ehci-pci
usb 8-6.3: New USB device found, idVendor=046d, idProduct=c223
usb 8-6.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-6.3: Product: G11 Keyboard
hub 8-6.3:1.0: USB hub found
hub 8-6.3:1.0: 4 ports detected
usb 8-6.4: new high-speed USB device number 5 using ehci-pci
Switched to clocksource tsc
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: Maxtor 6B250S0, BANC1B10, max UDMA/100
ata3.00: 488397168 sectors, multi 0: LBA48
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA Maxtor 6B250S0 BANC PQ: 0 ANSI: 5
usb 8-6.4: New USB device found, idVendor=046d, idProduct=081d
usb 8-6.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 8-6.4: SerialNumber: B4A8A4C0
usb 8-6.3.1: new low-speed USB device number 6 using ehci-pci
ata4: SATA link down (SStatus 0 SControl 300)
usb 8-6.3.1: New USB device found, idVendor=046d, idProduct=c221
usb 8-6.3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-6.3.1: Product: Gaming Keyboard
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.7/usb8/8-6/8-6.3/8-6.3.1/8-6.3.1:1.0/input/input1
hid-generic 0003:046D:C221.0002: input,hidraw0: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1a.7-6.3.1/input0
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.7/usb8/8-6/8-6.3/8-6.3.1/8-6.3.1:1.1/input/input2
hid-generic 0003:046D:C221.0003: input,hiddev0,hidraw1: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1a.7-6.3.1/input1
usb 8-6.3.3: new full-speed USB device number 7 using ehci-pci
usb 8-6.3.3: New USB device found, idVendor=04b4, idProduct=1220
usb 8-6.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-6.3.3: Product: Ikari Optical
usb 8-6.3.3: Manufacturer: SteelSeries ApS
input: SteelSeries ApS Ikari Optical as /devices/pci0000:00/0000:00:1a.7/usb8/8-6/8-6.3/8-6.3.3/8-6.3.3:1.0/input/input3
hid-generic 0003:04B4:1220.0004: input,hiddev0,hidraw2: USB HID v1.11 Mouse [SteelSeries ApS Ikari Optical] on usb-0000:00:1a.7-6.3.3/input0
usb 8-6.3.4: new full-speed USB device number 8 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 8-6.3.4: New USB device found, idVendor=046d, idProduct=c225
usb 8-6.3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-6.3.4: Product: G11 Keyboard
input: G11 Keyboard as /devices/pci0000:00/0000:00:1a.7/usb8/8-6/8-6.3/8-6.3.4/8-6.3.4:1.0/input/input4
hid-generic 0003:046D:C225.0005: input,hiddev0,hidraw3: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:1a.7-6.3.4/input0
ata6: SATA link down (SStatus 0 SControl 300)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sda: sda1 sda2 sda3
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Syslog.
systemd[1]: Reached target Syslog.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
systemd-journald[152]: Vacuuming done, freed 0 bytes
ppdev: user-space parallel port driver
fuse init (API version 7.22)
systemd-udevd[182]: starting version 204
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
sony 0003:054C:0268.0001: Fixing up Sony Sixaxis report descriptor
input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input7
sony 0003:054C:0268.0001: input,hiddev0,hidraw4: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1a.0-2/input0
media: Linux media interface: v0.10
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
input: PC Speaker as /devices/platform/pcspkr/input/input8
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
uvcvideo: Found UVC 1.00 device (046d:081d)
input: UVC Camera (046d:081d) as /devices/pci0000:00/0000:00:1a.7/usb8/8-6/8-6.4/8-6.4:1.2/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
alg: No test for crc32 (crc32-pclmul)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.67 Fri Apr 4 13:48:39 PDT 2014
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[152]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
r8169 0000:03:00.0: Direct firmware load failed with error -2
r8169 0000:03:00.0: Falling back to user helper
r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
warning: process `MetroLL' used the deprecated sysctl system call with 10.1.
usb 1-2: USB disconnect, device number 2
usb 1-2: new full-speed USB device number 3 using uhci_hcd
usb 1-2: New USB device found, idVendor=054c, idProduct=0268
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: PLAYSTATION(R)3 Controller
usb 1-2: Manufacturer: Sony
sony 0003:054C:0268.0006: Fixing up Sony Sixaxis report descriptor
input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input20
sony 0003:054C:0268.0006: input,hiddev0,hidraw4: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1a.0-2/input0
systemd[1]: Reached target Network.
systemd[1]: Reached target Host and Network Name Lookups.
systemd[1]: Mounted /home.
systemd[1]: Mounted /boot.
systemd[1]: Mounted /.
systemd[1]: Found device WDC_WD5001AALS-00F41A0.
systemd[1]: Found device WDC_WD5001AALS-00F41A0.
systemd[1]: Listening on CUPS Printing Service Sockets.