dmesg - Opus

Return To Opus System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cab8bfff] usable
BIOS-e820: [mem 0x00000000cab8c000-0x00000000cab92fff] ACPI NVS
BIOS-e820: [mem 0x00000000cab93000-0x00000000cb3f3fff] usable
BIOS-e820: [mem 0x00000000cb3f4000-0x00000000cb66efff] reserved
BIOS-e820: [mem 0x00000000cb66f000-0x00000000db2c4fff] usable
BIOS-e820: [mem 0x00000000db2c5000-0x00000000db34cfff] reserved
BIOS-e820: [mem 0x00000000db34d000-0x00000000db496fff] usable
BIOS-e820: [mem 0x00000000db497000-0x00000000db9dafff] ACPI NVS
BIOS-e820: [mem 0x00000000db9db000-0x00000000dbffefff] reserved
BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: GIGABYTE MMLP3AP-00/MMLP3AP-00, BIOS F2 08/29/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7E00000000 write-back
  1 base 0200000000 mask 7FE0000000 write-back
  2 base 00E0000000 mask 7FE0000000 uncachable
  3 base 00DE000000 mask 7FFE000000 uncachable
  4 base 00DD000000 mask 7FFF000000 uncachable
  5 base 021FE00000 mask 7FFFE00000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3552MB, range: 32MB, type UC
reg 4, base: 3536MB, range: 16MB, type UC
reg 5, base: 8702MB, range: 2MB, type UC
total RAM covered: 8142M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 8  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3536MB, range: 16MB, type UC
reg 4, base: 3552MB, range: 32MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8702MB, range: 2MB, type UC
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd730-0x000fd73f] mapped at [ffff8800000fd730]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
 [mem 0x21fc00000-0x21fdfffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fbfffff]
 [mem 0x21c000000-0x21fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
 [mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcab8bfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xca9fffff] page 2M
 [mem 0xcaa00000-0xcab8bfff] page 4k
init_memory_mapping: [mem 0xcab93000-0xcb3f3fff]
 [mem 0xcab93000-0xcabfffff] page 4k
 [mem 0xcac00000-0xcb1fffff] page 2M
 [mem 0xcb200000-0xcb3f3fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xcb66f000-0xdb2c4fff]
 [mem 0xcb66f000-0xcb7fffff] page 4k
 [mem 0xcb800000-0xdb1fffff] page 2M
 [mem 0xdb200000-0xdb2c4fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xdb34d000-0xdb496fff]
 [mem 0xdb34d000-0xdb496fff] page 4k
init_memory_mapping: [mem 0xdbfff000-0xdbffffff]
 [mem 0xdbfff000-0xdbffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x35b82000-0x36db8fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000db59b090 00009C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000db5a8cf0 00010C (v05 ALASKA    A M I 01072009 AMI  00010013)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 00000000db59b1c0 00DB2A (v02 ALASKA    A M I 00000024 INTL 20120711)
ACPI: FACS 00000000db9d9080 000040
ACPI: APIC 00000000db5a8e00 000072 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 00000000db5a8e78 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: ASF! 00000000db5a8ec0 0000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
ACPI: SSDT 00000000db5a8f68 000200 (v01  INTEL sensrhub 00000000 INTL 20120711)
ACPI: SSDT 00000000db5a9168 0001BE (v01  Intel zpoddult 00001000 INTL 20091112)
ACPI: SSDT 00000000db5a9328 000494 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000db5a97c0 000AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: MCFG 00000000db5aa298 00003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000db5aa2d8 000038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000db5aa310 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000db5aa628 00329E (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
ACPI: DMAR 00000000db5ad8c8 0000B0 (v01 INTEL      HSW  00000001 INTL 00000001)
ACPI: CSRT 00000000db5ad978 0000C4 (v01   INTL HSWULT-R 00000001 INTL 20100528)
ACPI: SSDT 00000000db5ada40 0009FA (v01 Intel_ IsctTabl 00001000 INTL 20091112)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
Initmem setup node 0 [mem 0x00000000-0x21fdfffff]
  NODE_DATA [mem 0x21fdf6000-0x21fdfafff]
 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217400000-ffff88021f3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x21fdfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0xcab8bfff]
  node   0: [mem 0xcab93000-0xcb3f3fff]
  node   0: [mem 0xcb66f000-0xdb2c4fff]
  node   0: [mem 0xdb34d000-0xdb496fff]
  node   0: [mem 0xdbfff000-0xdbffffff]
  node   0: [mem 0x100000000-0x21fdfffff]
On node 0 totalpages: 2076458
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 13959 pages used for memmap
  DMA32 zone: 893326 pages, LIFO batch:31
  Normal zone: 18424 pages used for memmap
  Normal zone: 1179136 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcab8c000-0xcab92fff]
PM: Registered nosave memory: [mem 0xcb3f4000-0xcb66efff]
PM: Registered nosave memory: [mem 0xdb2c5000-0xdb34cfff]
PM: Registered nosave memory: [mem 0xdb497000-0xdb9dafff]
PM: Registered nosave memory: [mem 0xdb9db000-0xdbffefff]
PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021fa00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2043990
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8072948K/8305832K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 232884K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:984 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1696.038 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.07 BogoMIPS (lpj=6784152)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000dbe9e000 end: 0x000000dbeacfff
dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (13568.30 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcab8c000-0xcab92fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdb497000-0xdb9dafff] (5521408 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  5:36:46, date: 05/18/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000db343c18 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000db343618 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0005AA (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000db342d98 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e1d000-0xf7e1d01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8723] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 *10 11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcab8c000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb3f4000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdb2c5000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb497000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io  0x0680-0x069f] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0xffff] has been reserved
system 00:04: [io  0x1c00-0x1cfe] has been reserved
system 00:04: [io  0x1d00-0x1dfe] has been reserved
system 00:04: [io  0x1e00-0x1efe] has been reserved
system 00:04: [io  0x1f00-0x1ffe] has been reserved
system 00:04: [io  0x1800-0x18fe] could not be reserved
system 00:04: [io  0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x0a00-0x0a1f] has been reserved
system 00:08: [io  0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:0a: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:0a: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:0a: [mem 0xfe10c000-0xfe10cfff] has been reserved
system 00:0a: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:0a: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:0a: [mem 0xfe111000-0xfe111007] has been reserved
system 00:0a: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18652K (ffff880035b82000 - ffff880036db9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd72c5000-0xdb2c5000] (64MB) mapped at [ffff8800d72c5000-ffff8800db2c4fff]
microcode: CPU0 sig=0x40651, pf=0x40, revision=0xa
microcode: CPU1 sig=0x40651, pf=0x40, revision=0xa
microcode: CPU2 sig=0x40651, pf=0x40, revision=0xa
microcode: CPU3 sig=0x40651, pf=0x40, revision=0xa
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1400391406.620:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15803
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 59 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 60 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 1696.073 MHz
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-3: new low-speed USB device number 2 using xhci_hcd
usb 2-3: New USB device found, idVendor=1bcf, idProduct=0007
usb 2-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-3: Product: USB Optical Mouse
usb 2-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-4: new low-speed USB device number 3 using xhci_hcd
usb 2-4: New USB device found, idVendor=04f2, idProduct=0402
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Keyboard
usb 2-4: Manufacturer: Chicony
usb 2-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-7: new full-speed USB device number 4 using xhci_hcd
usb 2-7: New USB device found, idVendor=13d3, idProduct=3394
usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-7: Product: RT Bluetooth Radio
usb 2-7: Manufacturer: Realtek
usb 2-7: SerialNumber: 00e04c000001
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 14:454:618
rtc_cmos 00:05: setting system clock to 2014-05-18 05:36:48 UTC (1400391408)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
hidraw: raw HID events driver (C) Jiri Kosina
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a280 irq 62
r8169 0000:03:00.0: irq 63 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000c7a000, 74:d4:35:45:d8:dd, XID 0c000800 IRQ 63
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input2
hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input3
hid-generic 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-4/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/input/input4
hid-generic 0003:04F2:0402.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-4/input1
Switched to clocksource tsc
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 840 EVO 120GB mSATA, EXT41B6Q, max UDMA/133
ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 840  EXT4 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 31 bits of entropy available
init: plymouth-upstart-bridge main process (174) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (183) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (188) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 15356k swap on /dev/sda1.  Priority:-1 extents:1 across:15356k SSFS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[326]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 8d0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
i915 0000:00:02.0: irq 65 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
type=1400 audit(1400391409.630:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=514 comm="apparmor_parser"
type=1400 audit(1400391409.630:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=514 comm="apparmor_parser"
type=1400 audit(1400391409.634:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=514 comm="apparmor_parser"
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
type=1400 audit(1400391409.706:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=563 comm="apparmor_parser"
type=1400 audit(1400391409.706:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser"
type=1400 audit(1400391409.706:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
type=1400 audit(1400391409.710:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser"
type=1400 audit(1400391409.710:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
type=1400 audit(1400391409.710:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
init: cups main process (538) killed by HUP signal
init: cups main process ended, respawning
fbcon: inteldrmfb (fb0) is primary device
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
intel_rapl: domain uncore energy ctr 26572:26572 not working, skip
Console: switching to colour frame buffer device 240x75
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:51: registered as cooling_device10
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 66 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4054022d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000004
SKU: customization=0x00000002
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:hp
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
realtek: No valid SSID, checking pincfg 0x4054022d for NID 0x1d
realtek: Enabling init ASM_ID=0x022d CODEC_ID=10ec0269
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
random: nonblocking pool is initialized
init: failsafe main process (616) killed by TERM signal
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1091) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
ahci 0000:00:1f.2: port does not support device sleep
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1400391439.759:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2036 comm="apparmor_parser"
type=1400 audit(1400391439.759:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2036 comm="apparmor_parser"
type=1400 audit(1400391439.759:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2036 comm="apparmor_parser"
usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=152d, idProduct=0539
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-1: Product: USB to ATA/ATAPI Bridge
usb 3-1: Manufacturer: JMicron
usb 3-1: SerialNumber: DCA40562432F
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi4 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
scsi 4:0:0:0: Direct-Access     WDC WD10 EAVS-00D7B0           PQ: 0 ANSI: 2 CCS
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
systemd-hostnamed[2112]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-1: Disable of device-initiated U1 failed.
usb 3-1: Disable of device-initiated U2 failed.
usb 3-1: device not accepting address 2, error -22
sd 4:0:0:0: Device offlined - not ready after error recovery
sd 4:0:0:0: [sdb] Unhandled error code
sd 4:0:0:0: [sdb]  
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 4:0:0:0: [sdb] CDB: 
Read(10): 28 00 07 e5 11 30 00 00 f0 00
end_request: I/O error, dev sdb, sector 132452656
Buffer I/O error on device sdb1, logical block 16556326
Buffer I/O error on device sdb1, logical block 16556327
Buffer I/O error on device sdb1, logical block 16556328
Buffer I/O error on device sdb1, logical block 16556329
Buffer I/O error on device sdb1, logical block 16556330
Buffer I/O error on device sdb1, logical block 16556331
Buffer I/O error on device sdb1, logical block 16556332
Buffer I/O error on device sdb1, logical block 16556333
Buffer I/O error on device sdb1, logical block 16556334
sd 4:0:0:0: rejecting I/O to offline device
Buffer I/O error on device sdb1, logical block 16556335
sd 4:0:0:0: [sdb] killing request
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: [sdb] Unhandled error code
sd 4:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 4:0:0:0: [sdb] CDB: 
Read(10): 28 00 07 e5 12 20 00 00 10 00
end_request: I/O error, dev sdb, sector 132452896
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
sd 4:0:0:0: rejecting I/O to offline device
usb 3-1: USB disconnect, device number 2
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035afa980
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035afa9c0
usb 3-1: new SuperSpeed USB device number 3 using xhci_hcd
usb 3-1: New USB device found, idVendor=152d, idProduct=0539
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-1: Product: USB to ATA/ATAPI Bridge
usb 3-1: Manufacturer: JMicron
usb 3-1: SerialNumber: DCA40562432F
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi5 : usb-storage 3-1:1.0
scsi 5:0:0:0: Direct-Access     WDC WD10 EAVS-00D7B0           PQ: 0 ANSI: 2 CCS
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI disk
systemd-hostnamed[2687]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-1: Disable of device-initiated U1 failed.
usb 3-1: Disable of device-initiated U2 failed.
usb 3-1: device not accepting address 3, error -22
sd 5:0:0:0: Device offlined - not ready after error recovery
sd 5:0:0:0: [sdb] Unhandled error code
sd 5:0:0:0: [sdb]  
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 5:0:0:0: [sdb] CDB: 
Read(10): 28 00 14 91 41 50 00 00 f0 00
end_request: I/O error, dev sdb, sector 345063760
quiet_error: 22 callbacks suppressed
Buffer I/O error on device sdb1, logical block 43132714
Buffer I/O error on device sdb1, logical block 43132715
Buffer I/O error on device sdb1, logical block 43132716
Buffer I/O error on device sdb1, logical block 43132717
Buffer I/O error on device sdb1, logical block 43132718
Buffer I/O error on device sdb1, logical block 43132719
Buffer I/O error on device sdb1, logical block 43132720
Buffer I/O error on device sdb1, logical block 43132721
Buffer I/O error on device sdb1, logical block 43132722
sd 5:0:0:0: rejecting I/O to offline device
Buffer I/O error on device sdb1, logical block 43132723
sd 5:0:0:0: [sdb] killing request
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: [sdb] Unhandled error code
sd 5:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 5:0:0:0: [sdb] CDB: 
Read(10): 28 00 14 91 42 40 00 00 10 00
end_request: I/O error, dev sdb, sector 345064000
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
sd 5:0:0:0: rejecting I/O to offline device
usb 3-1: USB disconnect, device number 3
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800705ae400
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800705ae440
usb 3-1: new SuperSpeed USB device number 4 using xhci_hcd
usb 3-1: New USB device found, idVendor=152d, idProduct=0539
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-1: Product: USB to ATA/ATAPI Bridge
usb 3-1: Manufacturer: JMicron
usb 3-1: SerialNumber: DCA40562432F
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-1:1.0
scsi 6:0:0:0: Direct-Access     WDC WD10 EAVS-00D7B0           PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
systemd-hostnamed[2917]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-1: Disable of device-initiated U1 failed.
usb 3-1: Disable of device-initiated U2 failed.
usb 3-1: device not accepting address 4, error -22
sd 6:0:0:0: Device offlined - not ready after error recovery
sd 6:0:0:0: [sdb] Unhandled error code
sd 6:0:0:0: [sdb]  
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 6:0:0:0: [sdb] CDB: 
Read(10): 28 00 14 c4 8e f8 00 00 f0 00
end_request: I/O error, dev sdb, sector 348425976
quiet_error: 22 callbacks suppressed
Buffer I/O error on device sdb1, logical block 43552991
Buffer I/O error on device sdb1, logical block 43552992
Buffer I/O error on device sdb1, logical block 43552993
Buffer I/O error on device sdb1, logical block 43552994
Buffer I/O error on device sdb1, logical block 43552995
Buffer I/O error on device sdb1, logical block 43552996
Buffer I/O error on device sdb1, logical block 43552997
Buffer I/O error on device sdb1, logical block 43552998
Buffer I/O error on device sdb1, logical block 43552999
sd 6:0:0:0: rejecting I/O to offline device
Buffer I/O error on device sdb1, logical block 43553000
sd 6:0:0:0: [sdb] killing request
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: [sdb] Unhandled error code
sd 6:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 6:0:0:0: [sdb] CDB: 
Read(10): 28 00 14 c4 8f e8 00 00 10 00
end_request: I/O error, dev sdb, sector 348426216
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
sd 6:0:0:0: rejecting I/O to offline device
usb 3-1: USB disconnect, device number 4
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802110cdb00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802110cdb40
usb 3-1: new SuperSpeed USB device number 5 using xhci_hcd
usb 3-1: New USB device found, idVendor=152d, idProduct=0539
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-1: Product: USB to ATA/ATAPI Bridge
usb 3-1: Manufacturer: JMicron
usb 3-1: SerialNumber: DCA40562432F
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi7 : usb-storage 3-1:1.0
scsi 7:0:0:0: Direct-Access     WDC WD10 EAVS-00D7B0           PQ: 0 ANSI: 2 CCS
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Attached SCSI disk
usb 3-1: Disable of device-initiated U1 failed.
usb 3-1: Disable of device-initiated U2 failed.
usb 3-1: device not accepting address 5, error -22
sd 7:0:0:0: Device offlined - not ready after error recovery
sd 7:0:0:0: [sdb] Unhandled error code
sd 7:0:0:0: [sdb]  
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 7:0:0:0: [sdb] CDB: 
Read(10): 28 00 14 ba 84 f8 00 00 f0 00
end_request: I/O error, dev sdb, sector 347768056
quiet_error: 22 callbacks suppressed
Buffer I/O error on device sdb1, logical block 43470751
Buffer I/O error on device sdb1, logical block 43470752
Buffer I/O error on device sdb1, logical block 43470753
Buffer I/O error on device sdb1, logical block 43470754
Buffer I/O error on device sdb1, logical block 43470755
Buffer I/O error on device sdb1, logical block 43470756
Buffer I/O error on device sdb1, logical block 43470757
Buffer I/O error on device sdb1, logical block 43470758
Buffer I/O error on device sdb1, logical block 43470759
Buffer I/O error on device sdb1, logical block 43470760
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: [sdb] killing request
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: rejecting I/O to offline device
sd 7:0:0:0: [sdb] Unhandled error code
sd 7:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 7:0:0:0: [sdb] CDB: 
Read(10): 28 00 14 ba 85 e8 00 00 10 00
end_request: I/O error, dev sdb, sector 347768296
usb 3-1: USB disconnect, device number 5
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005d674d00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005d674d40
usb 3-1: new SuperSpeed USB device number 6 using xhci_hcd
usb 3-1: New USB device found, idVendor=152d, idProduct=0539
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-1: Product: USB to ATA/ATAPI Bridge
usb 3-1: Manufacturer: JMicron
usb 3-1: SerialNumber: DCA40562432F
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi8 : usb-storage 3-1:1.0
scsi 8:0:0:0: Direct-Access     WDC WD10 EAVS-00D7B0           PQ: 0 ANSI: 2 CCS
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI disk
usb 3-1: Disable of device-initiated U1 failed.
usb 3-1: Disable of device-initiated U2 failed.
usb 3-1: device not accepting address 6, error -22
sd 8:0:0:0: [sdb] Unhandled error code
sd 8:0:0:0: [sdb]  
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
sd 8:0:0:0: [sdb] CDB: 
Read(10): 28 00 13 17 e4 48 00 00 f0 00
end_request: I/O error, dev sdb, sector 320332872
quiet_error: 22 callbacks suppressed
Buffer I/O error on device sdb1, logical block 40041353
Buffer I/O error on device sdb1, logical block 40041354
Buffer I/O error on device sdb1, logical block 40041355
Buffer I/O error on device sdb1, logical block 40041356
Buffer I/O error on device sdb1, logical block 40041357
Buffer I/O error on device sdb1, logical block 40041358
Buffer I/O error on device sdb1, logical block 40041359
Buffer I/O error on device sdb1, logical block 40041360
Buffer I/O error on device sdb1, logical block 40041361
Buffer I/O error on device sdb1, logical block 40041362
usb 3-1: USB disconnect, device number 6
sd 8:0:0:0: [sdb] Unhandled error code
sd 8:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:0: [sdb] CDB: 
Read(10): 28 00 13 17 e5 38 00 00 10 00
end_request: I/O error, dev sdb, sector 320333112
sd 8:0:0:0: [sdb] Unhandled error code
sd 8:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 8:0:0:0: [sdb] CDB: 
Read(10): 28 00 13 17 e5 48 00 00 f0 00
end_request: I/O error, dev sdb, sector 320333128
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801e95f4700
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801e95f4740
usb 3-1: new SuperSpeed USB device number 7 using xhci_hcd
usb 3-1: New USB device found, idVendor=152d, idProduct=0539
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-1: Product: USB to ATA/ATAPI Bridge
usb 3-1: Manufacturer: JMicron
usb 3-1: SerialNumber: DCA40562432F
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 3-1:1.0
scsi 9:0:0:0: Direct-Access     WDC WD10 EAVS-00D7B0           PQ: 0 ANSI: 2 CCS
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] Attached SCSI disk
systemd-hostnamed[3926]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[4221]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 3-1: Disable of device-initiated U1 failed.
usb 3-1: Disable of device-initiated U2 failed.
usb 3-1: device not accepting address 7, error -22
sd 9:0:0:0: Device offlined - not ready after error recovery
sd 9:0:0:0: [sdb] Unhandled error code
sd 9:0:0:0: [sdb]  
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
sd 9:0:0:0: [sdb] CDB: 
Read(10): 28 00 10 15 38 00 00 00 f0 00
end_request: I/O error, dev sdb, sector 269826048
quiet_error: 52 callbacks suppressed
Buffer I/O error on device sdb1, logical block 33728000
Buffer I/O error on device sdb1, logical block 33728001
Buffer I/O error on device sdb1, logical block 33728002
Buffer I/O error on device sdb1, logical block 33728003
Buffer I/O error on device sdb1, logical block 33728004
Buffer I/O error on device sdb1, logical block 33728005
Buffer I/O error on device sdb1, logical block 33728006
Buffer I/O error on device sdb1, logical block 33728007
Buffer I/O error on device sdb1, logical block 33728008
Buffer I/O error on device sdb1, logical block 33728009
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: [sdb] killing request
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: rejecting I/O to offline device
sd 9:0:0:0: [sdb] Unhandled error code
sd 9:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 9:0:0:0: [sdb] CDB: 
Read(10): 28 00 10 15 38 f0 00 00 10 00
end_request: I/O error, dev sdb, sector 269826288
sd 9:0:0:0: rejecting I/O to offline device
usb 3-1: USB disconnect, device number 7
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021077d280
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021077d2c0
systemd-hostnamed[7033]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[13621]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

Return To Opus System Information