dmesg - hiuhui
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bca82fff] usable
BIOS-e820: [mem 0x00000000bca83000-0x00000000bcb9cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bcb9d000-0x00000000bcecafff] reserved
BIOS-e820: [mem 0x00000000bcecb000-0x00000000bcf42fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf43000-0x00000000bcf73fff] reserved
BIOS-e820: [mem 0x00000000bcf74000-0x00000000bcf78fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf79000-0x00000000bcf97fff] reserved
BIOS-e820: [mem 0x00000000bcf98000-0x00000000bcf98fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcf99000-0x00000000bcf9bfff] reserved
BIOS-e820: [mem 0x00000000bcf9c000-0x00000000bcfa3fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcfa4000-0x00000000bcfcefff] reserved
BIOS-e820: [mem 0x00000000bcfcf000-0x00000000bd1d1fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd1d2000-0x00000000bd4c6fff] usable
BIOS-e820: [mem 0x00000000bd4c7000-0x00000000bd7dafff] reserved
BIOS-e820: [mem 0x00000000bd7db000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./X79-UP4, BIOS F3p 11/16/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFC0000000 write-back
2 base 0000BE000000 mask 3FFFFE000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 1GB, type WB
reg 2, base: 3040MB, range: 32MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 32736M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3040MB, range: 32MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 1GB, type WB
e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd930-0x000fd93f] mapped at [ffff8800000fd930]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x83fe00000-0x83fffffff]
[mem 0x83fe00000-0x83fffffff] page 1G
init_memory_mapping: [mem 0x83c000000-0x83fdfffff]
[mem 0x83c000000-0x83fdfffff] page 1G
init_memory_mapping: [mem 0x800000000-0x83bffffff]
[mem 0x800000000-0x83bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbca82fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbc9fffff] page 2M
[mem 0xbca00000-0xbca82fff] page 4k
init_memory_mapping: [mem 0xbd1d2000-0xbd4c6fff]
[mem 0xbd1d2000-0xbd1fffff] page 4k
[mem 0xbd200000-0xbd3fffff] page 2M
[mem 0xbd400000-0xbd4c6fff] page 4k
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xbd7db000-0xbd7fffff]
[mem 0xbd7db000-0xbd7fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x34baa000-0x365ccfff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000bcecb070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bced3108 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bcecb170 007F96 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bcfa1f80 000040
ACPI: APIC 00000000bced3200 0000B2 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bced32b8 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000bced32f8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: SSDT 00000000bced3330 06F0C4 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: MATS 00000000bcf423f8 000034 (v01 ALASKA A M I 00000001 w?x2 00000000)
ACPI: DMAR 00000000bcf42430 0000C4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: MATS 00000000bcf424f8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083fffffff]
Initmem setup node 0 [mem 0x00000000-0x83fffffff]
NODE_DATA [mem 0x83fff9000-0x83fffdfff]
[ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081f600000-ffff88083f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x83fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbca82fff]
node 0: [mem 0xbd1d2000-0xbd4c6fff]
node 0: [mem 0xbd7db000-0xbd7fffff]
node 0: [mem 0x100000000-0x83fffffff]
On node 0 totalpages: 8375610
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12023 pages used for memmap
DMA32 zone: 769437 pages, LIFO batch:31
Normal zone: 118784 pages used for memmap
Normal zone: 7602176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbca83000-0xbcb9cfff]
PM: Registered nosave memory: [mem 0xbcb9d000-0xbcecafff]
PM: Registered nosave memory: [mem 0xbcecb000-0xbcf42fff]
PM: Registered nosave memory: [mem 0xbcf43000-0xbcf73fff]
PM: Registered nosave memory: [mem 0xbcf74000-0xbcf78fff]
PM: Registered nosave memory: [mem 0xbcf79000-0xbcf97fff]
PM: Registered nosave memory: [mem 0xbcf98000-0xbcf98fff]
PM: Registered nosave memory: [mem 0xbcf99000-0xbcf9bfff]
PM: Registered nosave memory: [mem 0xbcf9c000-0xbcfa3fff]
PM: Registered nosave memory: [mem 0xbcfa4000-0xbcfcefff]
PM: Registered nosave memory: [mem 0xbcfcf000-0xbd1d1fff]
PM: Registered nosave memory: [mem 0xbd4c7000-0xbd7dafff]
PM: Registered nosave memory: [mem 0xbd800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbd800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88083fc00000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8244718
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32867300K/33502440K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 635140K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
NR_IRQS:16640 nr_irqs:776 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.130 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.26 BogoMIPS (lpj=12800520)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020fa
dmar: RMRR base: 0x000000bcf49000 end: 0x000000bcf73fff
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (76803.12 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbca83000-0xbcb9cfff] (1155072 bytes)
PM: Registering ACPI NVS region [mem 0xbcecb000-0xbcf42fff] (491520 bytes)
PM: Registering ACPI NVS region [mem 0xbcf74000-0xbcf78fff] (20480 bytes)
PM: Registering ACPI NVS region [mem 0xbcf98000-0xbcf98fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbcf9c000-0xbcfa3fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0xbcfcf000-0xbd1d1fff] (2109440 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 22:11:11, date: 05/17/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf4a000-0xfbf4afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf49000-0xfbf4900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf48000-0xfbf48fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf47000-0xfbf473ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf20000-0xfbf23fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf46000-0xfbf463ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf45000-0xfbf457ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf44000-0xfbf440ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1002:6739] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa88] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:11.0: bridge window [mem 0xd0000000-0xd04fffff 64bit pref]
pci 0000:05:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:05:00.0: reg 0x10: [io 0xc040-0xc047]
pci 0000:05:00.0: reg 0x14: [io 0xc030-0xc033]
pci 0000:05:00.0: reg 0x18: [io 0xc020-0xc027]
pci 0000:05:00.0: reg 0x1c: [io 0xc010-0xc013]
pci 0000:05:00.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:05:00.0: reg 0x24: [mem 0xfbc10000-0xfbc101ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfbc00000-0xfbc0ffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:06:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xb040-0xb047]
pci 0000:06:00.0: reg 0x14: [io 0xb030-0xb033]
pci 0000:06:00.0: reg 0x18: [io 0xb020-0xb027]
pci 0000:06:00.0: reg 0x1c: [io 0xb010-0xb013]
pci 0000:06:00.0: reg 0x20: [io 0xb000-0xb00f]
pci 0000:06:00.0: reg 0x24: [mem 0xfbb10000-0xfbb101ff]
pci 0000:06:00.0: reg 0x30: [mem 0xfbb00000-0xfbb0ffff pref]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:07:00.0: [1b4b:9172] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io 0xa040-0xa047]
pci 0000:07:00.0: reg 0x14: [io 0xa030-0xa033]
pci 0000:07:00.0: reg 0x18: [io 0xa020-0xa027]
pci 0000:07:00.0: reg 0x1c: [io 0xa010-0xa013]
pci 0000:07:00.0: reg 0x20: [io 0xa000-0xa00f]
pci 0000:07:00.0: reg 0x24: [mem 0xfba10000-0xfba101ff]
pci 0000:07:00.0: reg 0x30: [mem 0xfba00000-0xfba0ffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:09:00.0: [1b73:1009] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfb900000-0xfb90ffff 64bit]
pci 0000:09:00.0: reg 0x18: [mem 0xfb911000-0xfb911fff 64bit]
pci 0000:09:00.0: reg 0x20: [mem 0xfb910000-0xfb910fff 64bit]
pci 0000:09:00.0: supports D1
pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:0a:00.0: [1b73:1009] type 00 class 0x0c0330
pci 0000:0a:00.0: reg 0x10: [mem 0xfb800000-0xfb80ffff 64bit]
pci 0000:0a:00.0: reg 0x18: [mem 0xfb811000-0xfb811fff 64bit]
pci 0000:0a:00.0: reg 0x20: [mem 0xfb810000-0xfb810fff 64bit]
pci 0000:0a:00.0: supports D1
pci 0000:0a:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfbffffff] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbca83000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd4c7000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0a00-0x0a0f] has been reserved
system 00:01: [io 0x0a30-0x0a3f] has been reserved
system 00:01: [io 0x0a20-0x0a2f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: [io 0x0400-0x0453] could not be reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:11.0: bridge window [mem 0xd0000000-0xd04fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.2: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfbffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd04fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:07: resource 0 [io 0xa000-0xafff]
pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:09: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:0a: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0c: resource 10 [mem 0xc0000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26764K (ffff880034baa000 - ffff8800365cd000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb8a83000-0xbca83000] (64MB) mapped at [ffff8800b8a83000-ffff8800bca82fff]
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU8 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU9 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU10 sig=0x206d7, pf=0x4, revision=0x70b
microcode: CPU11 sig=0x206d7, pf=0x4, revision=0x70b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1400364671.648:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pcieport 0000:00:02.0: irq 42 for MSI/MSI-X
pcieport 0000:00:03.0: irq 43 for MSI/MSI-X
pcieport 0000:00:11.0: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 47 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 48 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 49 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 50 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 51 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1440x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90013680000, using 10816k, total 10816k
Console: switching to colour frame buffer device 240x90
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C000._TPC] (Node ffff880813dd97d0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C002._TPC] (Node ffff880813de2370), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C004._TPC] (Node ffff880813de8f00), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C006._TPC] (Node ffff880813df1aa0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C008._TPC] (Node ffff880813df9640), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C00A._TPC] (Node ffff880813e011e0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C001._TPC] (Node ffff880813ddd5a0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C003._TPC] (Node ffff880813de6140), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C005._TPC] (Node ffff880813dedcd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C007._TPC] (Node ffff880813df5870), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C009._TPC] (Node ffff880813dfd410), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [\TST0] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.C00B._TPC] (Node ffff880813e04fa0), AE_NOT_FOUND (20131115/psparse-536)
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbf47000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf46000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 53 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 56 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 57 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 58 for MSI/MSI-X
xhci_hcd 0000:09:00.0: irq 59 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:09:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:09:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0a:00.0: irq 60 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 61 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 62 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 63 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 64 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:0a:00.0: irq 67 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb5: SerialNumber: 0000:0a:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0a:00.0: xHCI Host Controller
xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb6: SerialNumber: 0000:0a:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:222:199
rtc_cmos 00:04: setting system clock to 2014-05-17 22:11:12 UTC (1400364672)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[172]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 68 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 a90000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1462:0x2441).
[drm] register mmio base: 0xFBE20000
[drm] register mmio size: 131072
ATOM BIOS: 113
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 16448490 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading BARTS Microcode
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio ems apst
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88080c7e8c00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88080c7e8c0c
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90014232118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 69 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 1 usecs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45100 irq 68
ata2: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45180 irq 68
ata3: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45200 irq 68
ata4: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45280 irq 68
ata5: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45300 irq 68
ata6: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45380 irq 68
ahci 0000:05:00.0: irq 70 for MSI/MSI-X
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 71 for MSI/MSI-X
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfbc10000 port 0xfbc10100 irq 70
ata8: SATA max UDMA/133 abar m512@0xfbc10000 port 0xfbc10180 irq 70
ahci 0000:06:00.0: irq 72 for MSI/MSI-X
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 72
ata10: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 72
ahci 0000:07:00.0: irq 73 for MSI/MSI-X
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi10 : ahci
scsi11 : ahci
ata11: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10100 irq 73
ata12: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10180 irq 73
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:6f:ad:87
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata11: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: ADATA SX900, 5.0.7a, max UDMA/133
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ADATA SX900 5.0. PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] fb mappable at 0xC0474000
[drm] vram apper at 0xC0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
usb 2-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 3200.114 MHz
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133
ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata10.00: ATA-8: Hitachi HDS722020ALA330, JKAOA3MA, max UDMA/133
ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10.00: configured for UDMA/133
ata8.00: ATAPI: HL-DT-ST DVD-RAM GH10L, FC09, max UDMA/100
ata8.00: configured for UDMA/100
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Console: switching to colour frame buffer device 240x75
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:02:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=2109, idProduct=2811
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB 2.0 HUB
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 6-1: New USB device found, idVendor=2109, idProduct=8110
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB 3.0 HUB
usb 6-1: Manufacturer: VLI Labs, Inc.
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1.1: New USB device found, idVendor=058f, idProduct=6377
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Mass Storage Device
usb 2-1.1: Manufacturer: Generic
usb 2-1.1: SerialNumber: 058F63776378
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi12 : usb-storage 2-1.1:1.0
usbcore: registered new interface driver usb-storage
usb 2-1.7: new low-speed USB device number 4 using ehci-pci
usb 2-1.7: New USB device found, idVendor=19ca, idProduct=0001
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7: Product: Sandio 3D HID Mouse
usb 2-1.7: Manufacturer: Mindtribe
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Mindtribe Sandio 3D HID Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input5
hid-generic 0003:19CA:0001.0001: input,hidraw0: USB HID v1.10 Mouse [Mindtribe Sandio 3D HID Mouse] on usb-0000:00:1d.0-1.7/input0
input: Mindtribe Sandio 3D HID Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input6
hid-generic 0003:19CA:0001.0002: input,hidraw1: USB HID v1.10 Multi-Axis Controller [Mindtribe Sandio 3D HID Mouse] on usb-0000:00:1d.0-1.7/input1
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 2-1.8: new full-speed USB device number 5 using ehci-pci
ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS29, 1.00, max UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS29 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
usb 2-1.8: New USB device found, idVendor=05e3, idProduct=0604
usb 2-1.8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.8: Product: USB Hub
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 4 ports detected
Switched to clocksource tsc
usb 5-1.3: new full-speed USB device number 3 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 5-1.3: New USB device found, idVendor=0a12, idProduct=0001
usb 5-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1.3: Product: EDRClassone
usb 5-1.4: new full-speed USB device number 4 using xhci_hcd
usb 5-1.4: New USB device found, idVendor=046d, idProduct=c52b
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product: USB Receiver
usb 5-1.4: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0a:00.0-1.4/input2
usb 2-1.8.2: new full-speed USB device number 6 using ehci-pci
ata6: SATA link down (SStatus 0 SControl 300)
scsi 7:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH10L FC09 PQ: 0 ANSI: 5
usb 2-1.8.2: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8.2: Product: USB Receiver
usb 2-1.8.2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0008: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8.2/input2
input: Logitech Unifying Device. Wireless PID:401b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/0003:046D:C52B.0008/input/input7
logitech-djdevice 0003:046D:C52B.0009: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:1d.0-1.8.2:1
input: Logitech Unifying Device. Wireless PID:4016 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/0003:046D:C52B.0008/input/input8
logitech-djdevice 0003:046D:C52B.000A: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:1d.0-1.8.2:2
scsi 12:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 12:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 12:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
scsi 12:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
scsi 12:0:0:4: Direct-Access Generic Mini SD Reader 1.06 PQ: 0 ANSI: 0
sd 12:0:0:0: Attached scsi generic sg3 type 0
sd 12:0:0:1: Attached scsi generic sg4 type 0
sd 12:0:0:2: Attached scsi generic sg5 type 0
sd 12:0:0:3: Attached scsi generic sg6 type 0
sd 12:0:0:4: Attached scsi generic sg7 type 0
usb 2-1.8.4: new full-speed USB device number 7 using ehci-pci
sd 12:0:0:0: [sdc] Attached SCSI removable disk
sd 12:0:0:1: [sdd] Attached SCSI removable disk
sd 12:0:0:2: [sde] Attached SCSI removable disk
sd 12:0:0:3: [sdf] Attached SCSI removable disk
sd 12:0:0:4: [sdg] Attached SCSI removable disk
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 7:0:0:0: Attached scsi CD-ROM sr1
sr 7:0:0:0: Attached scsi generic sg8 type 5
scsi 8:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg9 type 0
sd 8:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 8:0:0:0: [sdh] Write Protect is off
sd 8:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 9:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
sd 9:0:0:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 9:0:0:0: Attached scsi generic sg10 type 0
sd 9:0:0:0: [sdi] Write Protect is off
sd 9:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdi: sdi1
sd 9:0:0:0: [sdi] Attached SCSI disk
sdh: sdh1 sdh2 sdh3
sd 8:0:0:0: [sdh] Attached SCSI disk
usb 2-1.8.4: New USB device found, idVendor=046d, idProduct=c52e
usb 2-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8.4: Product: USB Receiver
usb 2-1.8.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.0/input/input9
hid-generic 0003:046D:C52E.000B: input,hidraw6: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.8.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.1/input/input10
hid-generic 0003:046D:C52E.000C: input,hiddev0,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.8.4/input1
random: nonblocking pool is initialized
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 78124028k swap on /dev/sdh1. Priority:-1 extents:1 across:78124028k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[439]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
mei_me 0000:00:16.0: irq 74 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 75 for MSI/MSI-X
mei_me 0000:00:16.0: no destination client found 0x800D0007
mei_me 0000:00:16.0: unexpected reset: dev_state = ENABLED
mei_me 0000:00:16.0: no destination client found 0x800D0007
mei_me 0000:00:16.0: unexpected reset: dev_state = ENABLED
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
mei_me 0000:00:16.0: no destination client found 0x80080007
mei_me 0000:00:16.0: unexpected reset: dev_state = ENABLED
type=1400 audit(1400364675.736:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=618 comm="apparmor_parser"
type=1400 audit(1400364675.736:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
type=1400 audit(1400364675.736:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
type=1400 audit(1400364675.740:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
type=1400 audit(1400364675.740:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
type=1400 audit(1400364675.740:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
EDAC MC: Ver: 3.0.0
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:02:00.1: Using LPIB position fix
snd_hda_intel 0000:02:00.1: irq 76 for MSI/MSI-X
hda-intel 0000:02:00.1: Enable sync_write for stable communication
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input19
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
intel_rapl: domain dram energy ctr 0:0 not working, skip
EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (973) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1400364676.048:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1059 comm="apparmor_parser"
type=1400 audit(1400364676.048:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1059 comm="apparmor_parser"
type=1400 audit(1400364676.048:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1059 comm="apparmor_parser"
init: cups main process (1066) killed by HUP signal
init: cups main process ended, respawning
init: kdm main process (1196) killed by TERM signal
e1000e 0000:00:19.0: irq 71 for MSI/MSI-X
e1000e 0000:00:19.0: irq 71 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Netfilter messages via NETLINK v0.30.
device eth0 entered promiscuous mode
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1432) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 12 processor cores.
vboxdrv: fAsync=0 offMin=0x1c6 offMax=0x3cf7
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1573) terminated with status 1
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 99 callbacks suppressed
type=1400 audit(1400364705.354:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2327 comm="apparmor_parser"
type=1400 audit(1400364705.354:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2327 comm="apparmor_parser"
type=1400 audit(1400364705.354:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2327 comm="apparmor_parser"
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.