dmesg - FG
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.10-7-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Mon Feb 3 09:41:24 UTC 2014 (750023e)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009b39cfff] usable
BIOS-e820: [mem 0x000000009b39d000-0x000000009b3a3fff] ACPI NVS
BIOS-e820: [mem 0x000000009b3a4000-0x000000009c337fff] usable
BIOS-e820: [mem 0x000000009c338000-0x000000009c874fff] reserved
BIOS-e820: [mem 0x000000009c875000-0x00000000ae10efff] usable
BIOS-e820: [mem 0x00000000ae10f000-0x00000000ae1b6fff] reserved
BIOS-e820: [mem 0x00000000ae1b7000-0x00000000ae1cafff] ACPI data
BIOS-e820: [mem 0x00000000ae1cb000-0x00000000ae29dfff] ACPI NVS
BIOS-e820: [mem 0x00000000ae29e000-0x00000000aeffefff] reserved
BIOS-e820: [mem 0x00000000aefff000-0x00000000aeffffff] usable
BIOS-e820: [mem 0x00000000af800000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z87M-D3H/Z87M-D3H, BIOS F6 05/16/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FC0000000 write-back
2 base 00C0000000 mask 7FC0000000 uncachable
3 base 00B0000000 mask 7FF0000000 uncachable
4 base 00AF800000 mask 7FFF800000 uncachable
5 base 023F800000 mask 7FFF800000 uncachable
6 base 023F600000 mask 7FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [ffff8800000fd6d0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fb4000, 0x01fb4fff] PGTABLE
BRK [0x01fb5000, 0x01fb5fff] PGTABLE
BRK [0x01fb6000, 0x01fb6fff] PGTABLE
init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
[mem 0x23f400000-0x23f5fffff] page 2M
BRK [0x01fb7000, 0x01fb7fff] PGTABLE
init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
[mem 0x23c000000-0x23f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x23bffffff]
[mem 0x200000000-0x23bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x9b39cfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x9b1fffff] page 2M
[mem 0x9b200000-0x9b39cfff] page 4k
init_memory_mapping: [mem 0x9b3a4000-0x9c337fff]
[mem 0x9b3a4000-0x9b3fffff] page 4k
[mem 0x9b400000-0x9c1fffff] page 2M
[mem 0x9c200000-0x9c337fff] page 4k
BRK [0x01fb8000, 0x01fb8fff] PGTABLE
init_memory_mapping: [mem 0x9c875000-0xae10efff]
[mem 0x9c875000-0x9c9fffff] page 4k
[mem 0x9ca00000-0xadffffff] page 2M
[mem 0xae000000-0xae10efff] page 4k
BRK [0x01fb9000, 0x01fb9fff] PGTABLE
init_memory_mapping: [mem 0xaefff000-0xaeffffff]
[mem 0xaefff000-0xaeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x350e6000-0x3686afff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20130517/tbutils-493)
ACPI: RSDT 00000000ae1bb028 00048 (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: FACP 00000000ae1bb0f0 00084 (v02 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000ae1bb178 0B004 (v02 ALASKA A M I 000000F6 INTL 20091112)
ACPI: FACS 00000000ae29c040 00040
ACPI: APIC 00000000ae1c6290 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000ae1c6308 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000ae1c6848 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 00000000ae1c7320 0003C (v01 01072009 MSFT 00000097)
ACPI: HPET 00000000ae1c7360 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ae1c7398 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000ae1c7708 03299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000ae1ca9a8 000B0 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
NODE_DATA [mem 0x23f5e8000-0x23f5fbfff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237000000-ffff88023ddfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x9b39cfff]
node 0: [mem 0x9b3a4000-0x9c337fff]
node 0: [mem 0x9c875000-0xae10efff]
node 0: [mem 0xaefff000-0xaeffffff]
node 0: [mem 0x100000000-0x23f5fffff]
On node 0 totalpages: 2019688
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9674 pages used for memmap
DMA32 zone: 707532 pages, LIFO batch:31
Normal zone: 17885 pages used for memmap
Normal zone: 1308160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9b39d000-0x9b3a3fff]
PM: Registered nosave memory: [mem 0x9c338000-0x9c874fff]
PM: Registered nosave memory: [mem 0xae10f000-0xae1b6fff]
PM: Registered nosave memory: [mem 0xae1b7000-0xae1cafff]
PM: Registered nosave memory: [mem 0xae1cb000-0xae29dfff]
PM: Registered nosave memory: [mem 0xae29e000-0xaeffefff]
PM: Registered nosave memory: [mem 0xaf000000-0xaf7fffff]
PM: Registered nosave memory: [mem 0xaf800000-0xbf9fffff]
PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023f200000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992052
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 7858992K/8078752K available (5831K kernel code, 772K rwdata, 4344K rodata, 1340K init, 1640K bss, 219760K reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-511.
NR_IRQS:33024 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.313 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.62 BogoMIPS (lpj=3392313)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff81e12000 - ffffffff81e18000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000ae135000 end: 0x000000ae141fff
dmar: RMRR base: 0x000000af800000 end: 0x000000bf9fffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature/speed normal
smpboot: Booting Node 0, Processors #1 #2 #3 OK
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27138.50 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9b39d000-0x9b3a3fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xae1cb000-0xae29dfff] (864256 bytes)
RTC time: 18:08:28, date: 05/14/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000ae1acc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
CPU3: Package temperature/speed normal
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000ae1ac618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000ae1abd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x18) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd8400000-0xd87fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xd8904000-0xd8907fff 64bit]
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd890e000-0xd890e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd890c000-0xd890c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd8900000-0xd8903fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd890b000-0xd890b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd890a000-0xd890a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd8909000-0xd89090ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd8804000-0xd8804fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd8800000-0xd8803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xd8800000-0xd88fffff]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03-05] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd80fffff]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xbfa00000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: [1131:7146] type 00 class 0x048000
pci 0000:04:00.0: reg 0x10: [mem 0xd8000000-0xd80001ff]
pci 0000:04:01.0: [3388:0021] type 01 class 0x060400
pci 0000:04:01.0: supports D1 D2
pci 0000:04:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xd80fffff]
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xd80fffff] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:03:00.0: bridge window [mem 0xbfa00000-0xfeafffff] (subtractive decode)
pci 0000:05:08.0: [4444:0016] type 00 class 0x040000
pci 0000:05:08.0: reg 0x10: [mem 0xd4000000-0xd7ffffff pref]
pci 0000:05:09.0: [4444:0016] type 00 class 0x040000
pci 0000:05:09.0: reg 0x10: [mem 0xd0000000-0xd3ffffff pref]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:01.0: bridge window [mem 0xd0000000-0xd7ffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9b39d000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9c338000-0x9fffffff]
e820: reserve RAM buffer [mem 0xae10f000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1c00-0x1cfe] has been reserved
system 00:04: [io 0x1d00-0x1dfe] has been reserved
system 00:04: [io 0x1e00-0x1efe] has been reserved
system 00:04: [io 0x1f00-0x1ffe] has been reserved
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a0f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0a: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xd8800000-0xd88fffff]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:01.0: bridge window [mem 0xd0000000-0xd7ffffff]
pci 0000:03:00.0: PCI bridge to [bus 04-05]
pci 0000:03:00.0: bridge window [mem 0xd0000000-0xd80fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-05]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd80fffff]
pci 0000:03:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xd8800000-0xd88fffff]
pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd80fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 13 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd80fffff]
pci_bus 0000:04: resource 5 [mem 0xd0000000-0xd80fffff]
pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 17 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd7ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 24084K (ffff8800350e6000 - ffff88003686b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xaa10f000-0xae10f000] (64MB) mapped at [ffff8800aa10f000-ffff8800ae10efff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1400090908.331:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15396
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd890a000 port 0xd890a100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xd890a000 port 0xd890a180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xd890a000 port 0xd890a200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xd890a000 port 0xd890a280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xd890a000 port 0xd890a300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xd890a000 port 0xd890a380 irq 42
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd890c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd890b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Key type dns_resolver registered
PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD10EFRX-68JCSN0_WD-WCC1U2677297-part1
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133
ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
scsi 2:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata5.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata4.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
scsi 4:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 3:0:0:0: [sdd] Attached SCSI disk
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 5:0:0:0: [sdf] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 14:20:140
acpi device:11: hash matches
rtc_cmos 00:05: setting system clock to 2014-05-14 18:08:29 UTC (1400090909)
Freeing unused kernel memory: 1340K (ffffffff81cc3000 - ffffffff81e12000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 304K (ffff8800015b4000 - ffff880001600000)
Freeing unused kernel memory: 1800K (ffff880001a3e000 - ffff880001c00000)
alua: device handler registered
usb 2-1: new high-speed USB device number 2 using ehci-pci
hp_sw: device handler registered
emc: device handler registered
rdac: device handler registered
systemd-udevd[127]: starting version 208
ACPI: Requesting acpi_cpufreq
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 500000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new low-speed USB device number 3 using ehci-pci
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:59: registered as cooling_device9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=0007
usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.3/input0
tsc: Refined TSC clocksource calibration: 3392.144 MHz
usb 1-1.4: new low-speed USB device number 4 using ehci-pci
usb 1-1.4: New USB device found, idVendor=0a81, idProduct=0101
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Keyboard
usb 1-1.4: Manufacturer: CHESEN
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4
hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1a.0-1.4/input0
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
hid-generic 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1a.0-1.4/input1
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU0 updated to revision 0x16, date = 2013-08-07
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 updated to revision 0x16, date = 2013-08-07
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 updated to revision 0x16, date = 2013-08-07
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 updated to revision 0x16, date = 2013-08-07
xor: automatically using best checksumming function:
avx : 34336.000 MB/sec
raid6: sse2x1 11179 MB/s
raid6: sse2x2 14179 MB/s
raid6: sse2x4 16113 MB/s
raid6: avx2x1 21019 MB/s
raid6: avx2x2 23613 MB/s
raid6: avx2x4 26636 MB/s
raid6: using algorithm avx2x4 (26636 MB/s)
raid6: using avx2x2 recovery algorithm
bio: create slab at 1
Btrfs loaded
PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
PM: Marking nosave pages: [mem 0x9b39d000-0x9b3a3fff]
PM: Marking nosave pages: [mem 0x9c338000-0x9c874fff]
PM: Marking nosave pages: [mem 0xae10f000-0xaeffefff]
PM: Marking nosave pages: [mem 0xaf000000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
video LNXVIDEO:00: Restoring backlight state
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Switched to clocksource tsc
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Starting LSB: Set default boot entry if called...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-readahead[278]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd-journald[284]: Vacuuming done, freed 0 bytes
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
systemd-udevd[330]: starting version 208
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 45 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7e000, 94:de:80:6b:aa:4b, XID 0c900800 IRQ 45
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
saa7146: register extension 'budget_ci dvb'
saa7146: found saa7146 @ mem ffffc90004ea2000 (revision 1, irq 19) (0x13c2,0x1010)
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget-C-CI PCI)
Linux video capture interface: v2.00
ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ivtv: Start initialization, version 1.4.3
ivtv0: Initializing card 0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
input: PC Speaker as /devices/platform/pcspkr/input/input6
adapter has MAC addr = 00:d0:5c:67:c4:d6
ALSA hda_i915.c:58 HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Registered IR keymap rc-tt-1500
input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.3/0000:03:00.0/0000:04:00.0/rc/rc0/input7
rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.3/0000:03:00.0/0000:04:00.0/rc/rc0
budget_ci: CI interface initialised
ALSA hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 5[1]:0
ALSA hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 6[1]:0
ALSA hda_codec.c:570 hda_codec: invalid CONNECT_LIST verb 7[1]:0
budget_ci dvb 0000:04:00.0: DVB: registering adapter 0 frontend 0 (ST STV0297 DVB-C)...
input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
ALSA patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x4045e601
ALSA patch_realtek.c:420 SKU: port_connectivity=0x1
ALSA patch_realtek.c:421 SKU: enable_pcbeep=0x0
ALSA patch_realtek.c:422 SKU: check_sum=0x00000005
ALSA patch_realtek.c:423 SKU: customization=0x000000e6
ALSA patch_realtek.c:424 SKU: external_amp=0x0
ALSA patch_realtek.c:425 SKU: platform_type=0x0
ALSA patch_realtek.c:426 SKU: swap=0x0
ALSA patch_realtek.c:427 SKU: override=0x1
ALSA hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:402 mono: mono_out=0x0
ALSA hda_auto_parser.c:405 dig-out=0x11/0x0
ALSA hda_auto_parser.c:406 inputs:
ALSA hda_auto_parser.c:410 Front Mic=0x19
ALSA hda_auto_parser.c:410 Rear Mic=0x18
ALSA hda_auto_parser.c:410 Line=0x1a
ALSA patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x4045e601 for NID 0x1d
ALSA patch_realtek.c:506 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
tveeprom 8-0050: Hauppauge model 23559, rev D591, serial# 8222407
tveeprom 8-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 8-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 8-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 8-0050: audio processor is CX25843 (idx 37)
tveeprom 8-0050: decoder processor is CX25843 (idx 30)
tveeprom 8-0050: has radio
ivtv0: Autodetected WinTV PVR 500 (unit #1)
cx25840 8-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
tea5767 8-0060: type set to Philips TEA5767HN FM Radio
tuner 8-0060: Tuner 62 found with type(s) Radio.
tda9887 8-0043: creating new instance
tda9887 8-0043: tda988[5/6/7] found
tuner 8-0043: Tuner 74 found with type(s) Radio TV.
tuner 8-0061: Tuner -1 found with type(s) TV.
wm8775 8-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 8-0061: creating new instance
tuner-simple 8-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card: WinTV PVR 500 (unit #1)
ivtv1: Initializing card 1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 10-0050: Hauppauge model 23559, rev D591, serial# 8222407
tveeprom 10-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 10-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 10-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 10-0050: audio processor is CX25843 (idx 37)
tveeprom 10-0050: decoder processor is CX25843 (idx 30)
tveeprom 10-0050: has radio
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
cx25840 10-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
tda9887 10-0043: creating new instance
tda9887 10-0043: tda988[5/6/7] found
tuner 10-0043: Tuner 74 found with type(s) Radio TV.
tuner 10-0061: Tuner -1 found with type(s) Radio TV.
wm8775 10-001b: chip found @ 0x36 (ivtv i2c driver #1)
tuner-simple 10-0061: creating new instance
tuner-simple 10-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
ivtv1: Registered device video1 for encoder MPG (4096 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Initialized card: WinTV PVR 500 (unit #2)
ivtv: End initialization
ivtv-alsa: module loading...
EXT4-fs (sdd2): mounting ext3 file system using the ext4 subsystem
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdc1): recovery complete
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdd2): recovery complete
EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sde1): recovery complete
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdf1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdf1): recovery complete
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
EXT4-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdd1): recovery complete
ivtv0: Encoder revision: 0x02060039
ivtv1: Encoder revision: 0x02060039
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k FS
dvb_ca adapter 0: DVB CAM detected and initialised successfully
cx25840 10-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
cx25840 8-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NET: Registered protocol family 17
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bridge firewalling registered
device eth0 entered promiscuous mode
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
systemd-journald[284]: Received request to flush runtime journal from PID 1
saa7146: register extension 'av7110'
fuse init (API version 7.22)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81c8a800)
traps: kcminit_startup[2941] general protection ip:7f1e876ee3d8 sp:7fff32c56fd8 error:0 in libpthread-2.18.so[7f1e876dd000+18000]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
dvb_ca adapter 0: DVB CAM detected and initialised successfully
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81c8a800)
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81c8a800)
LVM: Logical Volume autoactivation enabled.
LVM: Activation generator successfully completed.
type=1702 audit(1400095313.706:2): op=linkat ppid=1 pid=2599 auid=4294967295 uid=489 gid=65534 euid=489 suid=489 fsuid=489 egid=65534 sgid=65534 fsgid=65534 ses=4294967295 tty=(none) comm="dhcpd" exe="/usr/sbin/dhcpd" res=0
type=1302 audit(1400095313.706:3): item=0 name="/db/dhcpd.leases" inode=924685 dev=08:02 mode=0100644 ouid=0 ogid=0 rdev=00:00
dvb_ca adapter 0: DVB CAM detected and initialised successfully
dvb_ca adapter 0: DVB CAM detected and initialised successfully
dvb_ca adapter 0: DVB CAM detected and initialised successfully
dvb_ca adapter 0: DVB CAM detected and initialised successfully
dvb_ca adapter 0: DVB CAM detected and initialised successfully
perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
dvb_ca adapter 0: DVB CAM detected and initialised successfully
CPU0: Core temperature above threshold, cpu clock throttled (total events = 89)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 100)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 102)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 96)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 103)
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 8970)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 12194)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 12188)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 15341)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 15036)
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal