dmesg - Benchmarking
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-19-generic (buildd@comet) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #33-Ubuntu SMP Tue Mar 11 18:48:34 UTC 2014 (Ubuntu 3.11.0-19.33-generic 3.11.10.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf4d1fff] usable
BIOS-e820: [mem 0x00000000bf4d2000-0x00000000bf4dcfff] reserved
BIOS-e820: [mem 0x00000000bf4dd000-0x00000000bf533fff] usable
BIOS-e820: [mem 0x00000000bf534000-0x00000000bf536fff] reserved
BIOS-e820: [mem 0x00000000bf537000-0x00000000bf5bafff] usable
BIOS-e820: [mem 0x00000000bf5bb000-0x00000000bf5befff] reserved
BIOS-e820: [mem 0x00000000bf5bf000-0x00000000bf677fff] usable
BIOS-e820: [mem 0x00000000bf678000-0x00000000bf6befff] ACPI NVS
BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf6fffff] ACPI data
BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard Compaq Presario A900 Notebook PC/30ED, BIOS F.33 04/29/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbf678 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFFE0000 mask FFFFE0000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BF800000 mask FFF800000 uncachable
4 base 0BF700000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ffff8800000fe270]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0xbf200000-0xbf3fffff]
[mem 0xbf200000-0xbf3fffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbf1fffff]
[mem 0xbc000000-0xbf1fffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
[mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbf400000-0xbf4d1fff]
[mem 0xbf400000-0xbf4d1fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xbf4dd000-0xbf533fff]
[mem 0xbf4dd000-0xbf533fff] page 4k
init_memory_mapping: [mem 0xbf537000-0xbf5bafff]
[mem 0xbf537000-0xbf5bafff] page 4k
init_memory_mapping: [mem 0xbf5bf000-0xbf677fff]
[mem 0xbf5bf000-0xbf677fff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
RAMDISK: [mem 0x35ea8000-0x36f4bfff]
ACPI: RSDP 00000000000fe020 00024 (v02 HP )
ACPI: XSDT 00000000bf6fe120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000bf6fd000 000F4 (v04 HP SPARTAN 00000001 LOHR 00000000)
ACPI: DSDT 00000000bf6f4000 0802F (v01 HP SPARTAN 00000001 LOHR 00000000)
ACPI: FACS 00000000bf67d000 00040
ACPI: APIC 00000000bf6f3000 00068 (v02 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: HPET 00000000bf6f2000 00038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: MCFG 00000000bf6f1000 0003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: ASF! 00000000bf6f0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: SLIC 00000000bf6ef000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: BOOT 00000000bf6ee000 00028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
ACPI: SSDT 00000000bf6ed000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000bf677fff]
Initmem setup node 0 [mem 0x00000000-0xbf677fff]
NODE_DATA [mem 0xbf673000-0xbf677fff]
[ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bba00000-ffff8800be9fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbf4d1fff]
node 0: [mem 0xbf4dd000-0xbf533fff]
node 0: [mem 0xbf537000-0xbf5bafff]
node 0: [mem 0xbf5bf000-0xbf677fff]
On node 0 totalpages: 783876
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12186 pages used for memmap
DMA32 zone: 779878 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf4d2000-0xbf4dcfff]
PM: Registered nosave memory: [mem 0xbf534000-0xbf536fff]
PM: Registered nosave memory: [mem 0xbf5bb000-0xbf5befff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8800bf000000 s86720 r8192 d23872 u1048576
pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 771605
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3052496K/3135504K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1368K init, 1420K bss, 83008K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1861.994 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.98 BogoMIPS (lpj=7447976)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27857 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (7447.97 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf678000-0xbf6befff] (290816 bytes)
regulator-dummy: no parameters
RTC time: 19:47:18, date: 05/14/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bf67cc10 0026E (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0026E (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bf67b610 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bf67cf10 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bf67ed10 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: EC: GPE storm detected(10 GPEs), transactions will use polling mode
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20130517/nsarguments-189)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 8 0
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20130517/nsarguments-189)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 1f 0
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd10fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x30d0-0x30d7]
pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xd1100000-0xd11fffff 64bit]
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2400000-0xd2403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd2404800-0xd2404bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x30c8-0x30cf]
pci 0000:00:1f.1: reg 0x14: [io 0x30e4-0x30e7]
pci 0000:00:1f.1: reg 0x18: [io 0x30c0-0x30c7]
pci 0000:00:1f.1: reg 0x1c: [io 0x30e0-0x30e3]
pci 0000:00:1f.1: reg 0x20: [io 0x30a0-0x30af]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30b8-0x30bf]
pci 0000:00:1f.2: reg 0x14: [io 0x30dc-0x30df]
pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30d8-0x30db]
pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd2404000-0xd24047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd2404c00-0xd2404cff]
pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
pci 0000:01:00.0: [168c:001c] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd1300000-0xd130ffff 64bit]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1300000-0xd23fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:02:01.0: [10ec:8139] type 00 class 0x020000
pci 0000:02:01.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:02:01.0: reg 0x14: [mem 0xd1200000-0xd12000ff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 8 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf4d2000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf534000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf5bb000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf678000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1e.0 BAR 13 [io 0x1000-0x1fff]
system 00:00: [io 0x0600-0x060f] has been reserved
system 00:00: [io 0x0610] has been reserved
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x0810-0x0817] has been reserved
system 00:00: [io 0x0400-0x047f] could not be reserved
system 00:00: [io 0x0500-0x053f] has been reserved
system 00:00: [io 0xff2c-0xff2f] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs AUI0214 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1300000-0xd23fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xd1200000-0xd12fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd1300000-0xd23fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd12fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17040K (ffff880035ea8000 - ffff880036f4c000)
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1400096839.096:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 5995
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (63 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xd2404800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5553b4b7b74ebe0a90f93fbc0d8e2b9c98211b47'
registered taskstats version 1
ACPI: Battery Slot [BAT0] (battery absent)
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:297:799
ec PNP0C09:00: hash matches
rtc_cmos 00:02: setting system clock to 2014-05-14 19:47:20 UTC (1400096840)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40L, KC07, max MWDMA2
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40L KC07 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1368K (ffffffff81d10000 - ffffffff81e66000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[104]: starting version 204
usb 1-5: new high-speed USB device number 2 using ehci-pci
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:02:01.0: setting latency timer to 64
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
8139too 0000:02:01.0 eth0: RealTek RTL8139 at 0x0000000000011000, 00:1e:ec:90:46:08, IRQ 16
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xd2404000 port 0xd2404100 irq 41
ata4: DUMMY
ata5: DUMMY
usb 1-5: New USB device found, idVendor=0bda, idProduct=0158
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB2.0-CRW
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 20060413092100000
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 521A PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 1-6: new high-speed USB device number 3 using ehci-pci
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-6: New USB device found, idVendor=174f, idProduct=5212
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-6: Product: USB2.0 UVC PC Camera
usb 1-6: Manufacturer: Syntek
usb 1-6: SerialNumber: 0001
Adding 8385532k swap on /dev/sda5. Priority:-1 extents:1 across:8385532k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[291]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMA1 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
usbcore: registered new interface driver usb-storage
[drm] Memory usable by graphics device = 512M
i915 0000:00:02.0: setting latency timer to 64
ums-realtek 1-5:1.0: USB Mass Storage device detected
uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5212)
scsi5 : usb-storage 1-5:1.0
usbcore: registered new interface driver ums-realtek
ath5k 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
ath5k 0000:01:00.0: registered as 'phy0'
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] initialized overlay support
type=1400 audit(1400096843.634:2): apparmor="STATUS" operation="profile_load" parent=410 profile="unconfined" name="/sbin/dhclient" pid=417 comm="apparmor_parser"
type=1400 audit(1400096843.634:3): apparmor="STATUS" operation="profile_load" parent=410 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=417 comm="apparmor_parser"
type=1400 audit(1400096843.634:4): apparmor="STATUS" operation="profile_load" parent=410 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=417 comm="apparmor_parser"
type=1400 audit(1400096843.634:5): apparmor="STATUS" operation="profile_replace" parent=410 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=417 comm="apparmor_parser"
type=1400 audit(1400096843.634:6): apparmor="STATUS" operation="profile_replace" parent=410 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=417 comm="apparmor_parser"
type=1400 audit(1400096843.634:7): apparmor="STATUS" operation="profile_replace" parent=410 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=417 comm="apparmor_parser"
fbcon: inteldrmfb (fb0) is primary device
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
ath: EEPROM regdomain: 0x67
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x67
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Console: switching to colour frame buffer device 180x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
init: avahi-cups-reload main process (471) terminated with status 1
input: HP WMI hotkeys as /devices/virtual/input/input5
type=1400 audit(1400096844.634:8): apparmor="STATUS" operation="profile_load" parent=484 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=519 comm="apparmor_parser"
type=1400 audit(1400096844.634:9): apparmor="STATUS" operation="profile_load" parent=484 profile="unconfined" name="/usr/sbin/cupsd" pid=519 comm="apparmor_parser"
type=1400 audit(1400096844.634:10): apparmor="STATUS" operation="profile_replace" parent=484 profile="unconfined" name="/usr/sbin/cupsd" pid=519 comm="apparmor_parser"
acpi device:16: registered as cooling_device2
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
gpio_ich: GPIO from 206 to 255 on gpio_ich
microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
vesafb: module verification failed: signature and/or required key missing - tainting kernel
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90021280000, using 3072k, total 3072k
fb1: VESA VGA frame buffer device
init: failsafe main process (558) killed by TERM signal
IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
8139too 0000:02:01.0 eth4: link up, 100Mbps, full-duplex, lpa 0xC5E1
type=1400 audit(1400096846.466:11): apparmor="STATUS" operation="profile_load" parent=775 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=781 comm="apparmor_parser"
type=1400 audit(1400096846.466:12): apparmor="STATUS" operation="profile_load" parent=775 profile="unconfined" name="chromium_browser" pid=781 comm="apparmor_parser"
type=1400 audit(1400096846.466:13): apparmor="STATUS" operation="profile_replace" parent=775 profile="unconfined" name="chromium_browser" pid=781 comm="apparmor_parser"
type=1400 audit(1400096846.466:14): apparmor="STATUS" operation="profile_load" parent=775 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=780 comm="apparmor_parser"
type=1400 audit(1400096846.466:15): apparmor="STATUS" operation="profile_load" parent=775 profile="unconfined" name="chromium_browser" pid=780 comm="apparmor_parser"
type=1400 audit(1400096846.478:16): apparmor="STATUS" operation="profile_load" parent=775 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=783 comm="apparmor_parser"
type=1400 audit(1400096846.478:17): apparmor="STATUS" operation="profile_load" parent=775 profile="unconfined" name="chromium_browser" pid=783 comm="apparmor_parser"
type=1400 audit(1400096846.478:18): apparmor="STATUS" operation="profile_replace" parent=775 profile="unconfined" name="chromium_browser" pid=783 comm="apparmor_parser"
type=1400 audit(1400096846.482:19): apparmor="STATUS" operation="profile_replace" parent=775 profile="unconfined" name="chromium_browser" pid=780 comm="apparmor_parser"
type=1400 audit(1400096846.502:20): apparmor="STATUS" operation="profile_replace" parent=775 profile="unconfined" name="/sbin/dhclient" pid=784 comm="apparmor_parser"
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
perf samples too long (2528 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
perf samples too long (5001 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
systemd-hostnamed[4418]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
show_signal_msg: 135 callbacks suppressed
conftest[24257]: segfault at 0 ip 00000000004005c0 sp 00007fff31a610a0 error 4 in conftest[400000+1000]
conftest[24286]: segfault at 0 ip 00007facaf0dbbc6 sp 00007fff35752f48 error 4 in libc-2.17.so[7facaef97000+1bd000]
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb 1-5: reset high-speed USB device number 2 using ehci-pci
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 5:0:0:0: [sdb] Asking for cache data failed
sd 5:0:0:0: [sdb] Assuming drive cache: write through