dmesg - total
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
BIOS-e820: [mem 0x00000000c7282000-0x00000000c73edfff] usable
BIOS-e820: [mem 0x00000000c73ee000-0x00000000c740efff] reserved
BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
BIOS-e820: [mem 0x00000000c771f000-0x00000000c7771fff] usable
BIOS-e820: [mem 0x00000000c7772000-0x00000000c779efff] ACPI NVS
BIOS-e820: [mem 0x00000000c779f000-0x00000000c77dffff] usable
BIOS-e820: [mem 0x00000000c77e0000-0x00000000c77fefff] ACPI data
BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
BIOS-e820: [mem 0x00000000c7800000-0x00000000c8000fff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000f0f25000-0x00000000f0f25fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Alienware M15x/ , BIOS A09 01/05/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-through
MTRR variable ranges enabled:
0 disabled
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FF8000000 write-back
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask FE0000000 write-back
6 base 220000000 mask FF0000000 write-back
7 base 230000000 mask FF8000000 write-back
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6f60-0x000f6f6f] mapped at [ffff8800000f6f60]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x237e00000-0x237ffffff]
[mem 0x237e00000-0x237ffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x234000000-0x237dfffff]
[mem 0x234000000-0x237dfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x233ffffff]
[mem 0x200000000-0x233ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc727bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xc71fffff] page 2M
[mem 0xc7200000-0xc727bfff] page 4k
init_memory_mapping: [mem 0xc7282000-0xc73edfff]
[mem 0xc7282000-0xc73edfff] page 4k
init_memory_mapping: [mem 0xc740f000-0xc746efff]
[mem 0xc740f000-0xc746efff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xc770f000-0xc7717fff]
[mem 0xc770f000-0xc7717fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xc771f000-0xc7771fff]
[mem 0xc771f000-0xc7771fff] page 4k
init_memory_mapping: [mem 0xc779f000-0xc77dffff]
[mem 0xc779f000-0xc77dffff] page 4k
init_memory_mapping: [mem 0xc77ff000-0xc77fffff]
[mem 0xc77ff000-0xc77fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000f6e80 000024 (v02 PTLTD )
ACPI: XSDT 00000000c77f3e9f 000074 (v01 ALWARE ALIENWRE 06040000 LTP 00000000)
ACPI: FACP 00000000c77e4000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000c77e5000 00AC1F (v02 Intel CALPELLA 06040000 INTL 20060912)
ACPI: FACS 00000000c779cfc0 000040
ACPI: HPET 00000000c77fecc2 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000c77fecfa 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: OSFR 00000000c77fed36 000070 (v01 DELL DELL 06040000 ASL 00000061)
ACPI: APIC 00000000c77feda6 0000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000c77fee62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 00000000c77fee8a 000176 (v01 ALWARE ALIENWRE 06040000 LTP 00000000)
ACPI: SSDT 00000000c77e3000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 00000000c77e2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 00000000c77e1000 00049F (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
Initmem setup node 0 [mem 0x00000000-0x237ffffff]
NODE_DATA [mem 0x237ff3000-0x237ff7fff]
[ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x237ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xc727bfff]
node 0: [mem 0xc7282000-0xc73edfff]
node 0: [mem 0xc740f000-0xc746efff]
node 0: [mem 0xc770f000-0xc7717fff]
node 0: [mem 0xc771f000-0xc7771fff]
node 0: [mem 0xc779f000-0xc77dffff]
node 0: [mem 0xc77ff000-0xc77fffff]
node 0: [mem 0x100000000-0x237ffffff]
On node 0 totalpages: 2094209
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12692 pages used for memmap
DMA32 zone: 812262 pages, LIFO batch:31
Normal zone: 19968 pages used for memmap
Normal zone: 1277952 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
PM: Registered nosave memory: [mem 0xc727c000-0xc7281fff]
PM: Registered nosave memory: [mem 0xc73ee000-0xc740efff]
PM: Registered nosave memory: [mem 0xc746f000-0xc746ffff]
PM: Registered nosave memory: [mem 0xc7470000-0xc74f0fff]
PM: Registered nosave memory: [mem 0xc74f1000-0xc770efff]
PM: Registered nosave memory: [mem 0xc7718000-0xc771efff]
PM: Registered nosave memory: [mem 0xc7772000-0xc779efff]
PM: Registered nosave memory: [mem 0xc77e0000-0xc77fefff]
PM: Registered nosave memory: [mem 0xc7800000-0xc8000fff]
PM: Registered nosave memory: [mem 0xc8001000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf0f24fff]
PM: Registered nosave memory: [mem 0xf0f25000-0xf0f25fff]
PM: Registered nosave memory: [mem 0xf0f26000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc8001000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880237c00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061464
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8143536K/8376836K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 233300K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.027 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.05 BogoMIPS (lpj=6384108)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (25536.43 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xc7772000-0xc779efff] (184320 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:17:30, date: 05/06/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000c771aa98 0002F4 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0002F4 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000c7719618 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000c771a718 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000c7718d98 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xfebfffff]
pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:19.0: [8086:10eb] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf0f00000-0xf0f1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf0f24000-0xf0f24fff]
pci 0000:00:19.0: reg 0x18: [io 0x1800-0x181f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf0f27000-0xf0f273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0f20000-0xf0f23fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf0f27400-0xf0f277ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x1850-0x1857]
pci 0000:00:1f.2: reg 0x14: [io 0x1844-0x1847]
pci 0000:00:1f.2: reg 0x18: [io 0x1848-0x184f]
pci 0000:00:1f.2: reg 0x1c: [io 0x1840-0x1843]
pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0f26000-0xf0f267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0f27800-0xf0f278ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1860-0x187f]
pci 0000:02:00.0: [10de:0618] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
pci 0000:02:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0xcc000000-0xceffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-06]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:07:00.0: [8086:4235] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xf0a00000-0xf0a01fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 07-08]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0bfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:09:07.0: [1180:0832] type 00 class 0x0c0010
pci 0000:09:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:09:07.0: MMC cards are now supported by standard SDHCI controller
pci 0000:09:07.0: reg 0x10: [mem 0xf0c00000-0xf0c007ff]
pci 0000:09:07.0: supports D1 D2
pci 0000:09:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:07.1: [1180:0822] type 00 class 0x080500
pci 0000:09:07.1: reg 0x10: [mem 0xf0c00800-0xf0c008ff]
pci 0000:09:07.1: supports D1 D2
pci 0000:09:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:07.2: [1180:0592] type 00 class 0x088000
pci 0000:09:07.2: reg 0x10: [mem 0xf0c01000-0xf0c010ff]
pci 0000:09:07.2: supports D1 D2
pci 0000:09:07.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:07.3: [1180:0852] type 00 class 0x088000
pci 0000:09:07.3: reg 0x10: [mem 0xf0c01400-0xf0c014ff]
pci 0000:09:07.3: supports D1 D2
pci 0000:09:07.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.CPBG: notify handler is installed
Found 2 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc73ee000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7772000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc77e0000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x0500-0x050f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] could not be reserved
system 00:04: [io 0x1180-0x11ff] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [io 0xfe00] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x06a0-0x06af] has been reserved
system 00:05: [io 0x06b0-0x06ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs ITE8708 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs SYN0b14 SYN0b00 SYN0002 PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0xf0f25000-0xf0f25fff] has been reserved
system 00:0b: [mem 0xc8000000-0xc8000fff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0xcc000000-0xceffffff]
pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03-04]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 05-06]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 07-08]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0bfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci 0000:00:1e.0: bridge window [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xc8000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xcc000000-0xceffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf0600000-0xf07fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0bfffff]
pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:09: resource 10 [mem 0xc8000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc327c000-0xc727c000] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
Simple Boot Flag at 0x36 set to 0x1
microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1399400253.084:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15941
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0f27000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0f27400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:73:291
tty tty24: hash matches
rtc_cmos 00:06: setting system clock to 2014-05-06 18:17:33 UTC (1399400253)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
usb 1-1: new high-speed USB device number 2 using ehci-pci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:09:07.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:09:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:09:07.1: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:09:07.1: dummy supplies not allowed
mmc0: no vmmc regulator found
sdhci-pci 0000:09:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:09:07.1] using DMA
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems sxs apst
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0f26000 port 0xf0f26100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xf0f26000 port 0xf0f26180 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf0f26000 port 0xf0f26300 irq 45
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
firewire_ohci 0000:09:07.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
usb 2-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:b9:63:cd:b6
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVDRW/BDROM CA10N, A109, max UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
tsc: Refined TSC clocksource calibration: 1595.891 MHz
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 521A PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRWBD CA10N A109 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6412
usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
usb 1-1.4: Manufacturer: M092S-D00-9909-SC5CV
firewire_core 0000:09:07.0: created device fw0: GUID 7e642500674aff0b, S400
random: init urandom read with 74 bits of entropy available
usb 2-1.2: new full-speed USB device number 3 using ehci-pci
init: plymouth-upstart-bridge main process (224) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (234) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (238) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Receiver
usb 2-1.2: Manufacturer: Logitech
usb 2-1.4: new full-speed USB device number 4 using ehci-pci
usb 2-1.4: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
usb 2-1.4: New USB device found, idVendor=187c, idProduct=0512
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: Mobiles
usb 2-1.4: Manufacturer: Alienware Gaming
usb 2-1.4: SerialNumber: 1.1.3
Adding 8374268k swap on /dev/sda5. Priority:-1 extents:1 across:8374268k SSFS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
usb 2-1.7: new full-speed USB device number 5 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-1.7: New USB device found, idVendor=0a5c, idProduct=4500
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7: Product: BCM2046B1
usb 2-1.7: Manufacturer: Broadcom
hub 2-1.7:1.0: USB hub found
hub 2-1.7:1.0: 3 ports detected
systemd-udevd[376]: starting version 204
random: nonblocking pool is initialized
lp: driver loaded but no devices found
usb 2-1.7.1: new full-speed USB device number 6 using ehci-pci
ppdev: user-space parallel port driver
Switched to clocksource tsc
wmi: Mapper loaded
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
usb 2-1.7.1: New USB device found, idVendor=413c, idProduct=8157
usb 2-1.7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
acpi device:04: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
ite_cir: Auto-detected model: ITE8708 CIR transceiver
ite_cir: Using model: ITE8708 CIR transceiver
ite_cir: TX-capable: 1
ite_cir: Sample period (ns): 8680
ite_cir: TX carrier frequency (Hz): 38000
ite_cir: TX duty cycle (%): 33
ite_cir: RX low carrier frequency (Hz): 0
ite_cir: RX high carrier frequency (Hz): 0
usb 2-1.7.2: new full-speed USB device number 7 using ehci-pci
Registered IR keymap rc-rc6-mce
input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input8
rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
ite_cir: driver has been successfully loaded
IR Sony protocol handler initialized
input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input9
IR MCE Keyboard/mouse protocol handler initialized
IR SANYO protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 248
rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
IR LIRC bridge handler initialized
usb 2-1.7.2: New USB device found, idVendor=413c, idProduct=8158
usb 2-1.7.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \RPGB 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \RPGP 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r592: driver successfully loaded
cfg80211: Calling CRDA to update world regulatory domain
EDAC MC: Ver: 3.0.0
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
r852: driver loaded successfully
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:07:00.0: irq 47 for MSI/MSI-X
iwlwifi 0000:07:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.121 Tue Mar 4 19:47:43 PST 2014
iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:07:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:07:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
iwlwifi 0000:07:00.0: L1 Enabled; Disabling L0S
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
type=1400 audit(1399389455.890:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=633 comm="apparmor_parser"
type=1400 audit(1399389455.890:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=633 comm="apparmor_parser"
type=1400 audit(1399389455.894:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=633 comm="apparmor_parser"
Linux video capture interface: v2.00
type=1400 audit(1399389456.038:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=671 comm="apparmor_parser"
type=1400 audit(1399389456.038:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=671 comm="apparmor_parser"
type=1400 audit(1399389456.038:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser"
type=1400 audit(1399389456.042:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=671 comm="apparmor_parser"
type=1400 audit(1399389456.042:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser"
type=1400 audit(1399389456.042:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6412)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
hidraw: raw HID events driver (C) Jiri Kosina
input: Dell WMI hotkeys as /devices/virtual/input/input13
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: cups main process (650) killed by HUP signal
init: cups main process ended, respawning
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x20/0x0
inputs:
Internal Mic=0x11
Mic=0xc
hid-generic 0003:187C:0512.0004: hiddev0,hidraw0: USB HID v1.01 Device [Alienware Gaming Mobiles] on usb-0000:00:1d.0-1.4/input0
input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1:1.0/input/input14
hid-generic 0003:413C:8157.0005: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.7.1/input0
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
input: Logitech Unifying Device. Wireless PID:401a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input15
logitech-djdevice 0003:046D:C52B.0007: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401a] on usb-0000:00:1d.0-1.2:1
usb 2-1.7.3: new full-speed USB device number 8 using ehci-pci
usb 2-1.7.3: New USB device found, idVendor=413c, idProduct=8156
usb 2-1.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7.3: Product: Dell Wireless 370 Bluetooth Mini-card
usb 2-1.7.3: Manufacturer: Dell Computer Corp
init: failsafe main process (773) killed by TERM signal
usbcore: registered new interface driver btusb
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.0, id: 0x25c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 558430
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
init: samba-ad-dc main process (824) terminated with status 1
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:07:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:07:00.0: Radio type=0x0-0x2-0x0
iwlwifi 0000:07:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:07:00.0: Radio type=0x0-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: nvidia-prime main process (1050) terminated with status 127
init: alsa-restore main process (1097) terminated with status 19
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
vboxdrv: Found 8 processor cores.
init: plymouth-upstart-bridge main process ended, respawning
vboxdrv: fAsync=0 offMin=0x2e59 offMax=0x139fb
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: udev-fallback-graphics main process (1297) terminated with status 1
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
init: plymouth-splash main process (1368) terminated with status 1
audit_printk_skb: 168 callbacks suppressed
type=1400 audit(1399389459.166:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1376 comm="apparmor_parser"
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
init: plymouth-stop pre-start process (1404) terminated with status 1
wlan0: authenticate with 5c:d9:98:c0:a6:bd
wlan0: send auth to 5c:d9:98:c0:a6:bd (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from 5c:d9:98:c0:a6:bd
wlan0: associate with 5c:d9:98:c0:a6:bd (try 1/3)
wlan0: RX AssocResp from 5c:d9:98:c0:a6:bd (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
IPv6: wlan0: IPv6 duplicate address fe80::221:6aff:fea0:976c detected!
type=1400 audit(1399389486.210:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2797 comm="apparmor_parser"
type=1400 audit(1399389486.210:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2797 comm="apparmor_parser"
type=1400 audit(1399389486.210:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2797 comm="apparmor_parser"
type=1400 audit(1399389497.035:71): apparmor="DENIED" operation="ptrace" profile="/usr/lib/telepathy/telepathy-*" pid=2829 comm="telepathy-haze" requested_mask="read" denied_mask="read" peer="unconfined"
systemd-hostnamed[3489]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2592 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: PHY Wakeup cause - Unicast Packet
ACPI : EC: GPE storm detected(10 GPEs), transactions will use polling mode
ACPI: \_SB_.AC__: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
perf samples too long (5037 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: PHY Wakeup cause - Unicast Packet
wlan0: deauthenticating from 5c:d9:98:c0:a6:bd by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.005 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ite-cir 00:07: disabled
PM: suspend of devices complete after 851.748 msecs
PM: late suspend of devices complete after 0.336 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 95.240 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
Broke affinity for irq 47
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
Broke affinity for irq 42
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 43
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
Broke affinity for irq 44
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
Broke affinity for irq 16
Broke affinity for irq 23
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
Broke affinity for irq 10
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
hpet: hpet3 irq 41 for MSI
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
hpet: hpet4 irq 42 for MSI
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
hpet: hpet5 irq 43 for MSI
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
hpet: hpet6 irq 44 for MSI
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
firewire_ohci 0000:09:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
firewire_ohci 0000:09:07.0: MMC cards are now supported by standard SDHCI controller
PM: noirq resume of devices complete after 160.566 msecs
PM: early resume of devices complete after 0.390 msecs
iwlwifi 0000:07:00.0: RF_KILL bit toggled to enable radio.
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
sdhci-pci 0000:09:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
sdhci-pci 0000:09:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
usb 2-1: reset high-speed USB device number 2 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
usb 1-1: reset high-speed USB device number 2 using ehci-pci
firewire_core 0000:09:07.0: rediscovered device fw0
usb 2-1.4: reset full-speed USB device number 4 using ehci-pci
usb 2-1.7: reset full-speed USB device number 5 using ehci-pci
usb 2-1.2: reset full-speed USB device number 3 using ehci-pci
usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
usb 2-1.7.1: reset full-speed USB device number 6 using ehci-pci
usb 2-1.7.2: reset full-speed USB device number 7 using ehci-pci
ite-cir 00:07: activated
PM: resume of devices complete after 1902.589 msecs
PM: Finishing wakeup.
iwlwifi 0000:07:00.0: no hotplug settings from platform
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 2-1.7.3: USB disconnect, device number 8
usb 2-1.7.3: new full-speed USB device number 9 using ehci-pci
usb 2-1.7.3: New USB device found, idVendor=413c, idProduct=8156
usb 2-1.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7.3: Product: Dell Wireless 370 Bluetooth Mini-card
usb 2-1.7.3: Manufacturer: Dell Computer Corp
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:07:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:07:00.0: Radio type=0x0-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 5c:d9:98:c0:a6:bd
wlan0: send auth to 5c:d9:98:c0:a6:bd (try 1/3)
wlan0: authenticated
wlan0: associate with 5c:d9:98:c0:a6:bd (try 1/3)
wlan0: RX AssocResp from 5c:d9:98:c0:a6:bd (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: TW
cfg80211: Regulatory domain changed to country: TW
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
IPv6: wlan0: IPv6 duplicate address fe80::221:6aff:fea0:976c detected!
type=1400 audit(1399399016.106:72): apparmor="DENIED" operation="ptrace" profile="/usr/lib/telepathy/telepathy-*" pid=6464 comm="telepathy-haze" requested_mask="read" denied_mask="read" peer="unconfined"
ACPI: \_SB_.AC__: ACPI_NOTIFY_BUS_CHECK event: unsupported
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: PHY Wakeup cause - Unicast Packet
systemd-hostnamed[7406]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
perf samples too long (10089 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x91 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e011 ' to make it known.