dmesg - first_run
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Linux version 3.8.13-bone47 (root@imx6q-wandboard-2gb-0) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #1 SMP Fri Apr 11 03:16:21 UTC 2014
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 130816
free_area_init_node: node 0, pgdat c07f2b00, node_mem_map c086e000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 129792 pages, LIFO batch:31
AM335X ES1.0 (neon )
PERCPU: Embedded 9 pages/cpu @c0c7e000 s14080 r8192 d14592 u36864
pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
allocated 1048576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 511MB = 511MB total
Memory: 505856k/505856k available, 18432k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
.text : 0xc0008000 - 0xc0731008 (7333 kB)
.init : 0xc0732000 - 0xc076d700 ( 238 kB)
.data : 0xc076e000 - 0xc07f5ac0 ( 543 kB)
.bss : 0xc07f5ac0 - 0xc086d1c0 ( 478 kB)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
NR_IRQS:0 nr_irqs:0 0
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Total of 128 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 24000000 Hz
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
OMAP clocksource: GPTIMER2 at 24000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 993.47 BogoMIPS (lpj=969728)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket -1, mpidr 0
Setting up static identity map for 0x8042f240 - 0x8042f28c
Brought up 1 CPUs
SMP: Total of 1 processors activated (993.47 BogoMIPS).
devtmpfs: initialized
omap_hwmod: wd_timer2: _wait_target_disable failed
pinctrl core: initialized pinctrl subsystem
rstctl core: initialized rstctl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
gpiochip_add: registered GPIOs 0 to 31 on device: gpio
OMAP GPIO hardware version 0.1
gpiochip_add: registered GPIOs 32 to 63 on device: gpio
gpiochip_add: registered GPIOs 64 to 95 on device: gpio
gpiochip_add: registered GPIOs 96 to 127 on device: gpio
of_get_named_gpio_flags exited with status 52
gpio-rctrl rstctl.4: loaded OK
omap_hwmod: pruss: failed to hardreset
hw-breakpoint: debug architecture 0x4 unsupported.
cpsw.0: No hwaddr in dt. Using c8:a0:30:a7:a6:d2 from efuse
cpsw.1: No hwaddr in dt. Using c8:a0:30:a7:a6:d4 from efuse
bio: create slab at 0
edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
of_get_named_gpio_flags: can't parse gpios property
vmmcsd_fixed: 3300 mV
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
DCDC1: at 1500 mV
vdd_mpu: 925 1325 mV at 1325 mV
vdd_core: 925 1150 mV at 1125 mV
LDO1: at 1800 mV
LDO2: at 3300 mV
LDO3: 1800 mV
LDO4: at 3300 mV
tps65217 0-0024: TPS65217 ID 0xe version 1.2
omap_i2c 44e0b000.i2c: unable to select pin group
omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
omap_i2c 4819c000.i2c: unable to select pin group
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Advanced Linux Sound Architecture Driver Initialized.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource gp_timer
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 12288 bytes)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3120K
hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
CPU PMU: attempt to register multiple PMU devices!
arm-pmu: probe of arm-pmu failed with error -28
omap2_mbox_probe: platform not supported
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.20)
Btrfs loaded
msgmni has been set to 994
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
tps65217-bl tps65217-bl: no platform data provided
tps65217-bl: probe of tps65217-bl failed with error -22
console [ttyO0] enabled
[drm] Initialized drm 1.1.0 20060810
[drm:tda998x_init],
brd: module loaded
loop: module loaded
at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5B,2313BBBK2287'
bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
bone-capemgr bone_capemgr.9: Skipping disabled cape with part# BB-BONELT-HDMI
bone-capemgr bone_capemgr.9: Skipping disabled cape with part# BB-BONELT-HDMIN
bone-capemgr bone_capemgr.9: slot #0: No cape found
bone-capemgr bone_capemgr.9: slot #1: No cape found
bone-capemgr bone_capemgr.9: slot #2: No cape found
bone-capemgr bone_capemgr.9: slot #3: No cape found
bone-capemgr bone_capemgr.9: slot #4: specific override
bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
bone-capemgr bone_capemgr.9: slot #5: specific override
bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
bone-capemgr bone_capemgr.9: slot #6: specific override
bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 6
bone-capemgr bone_capemgr.9: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN'
bone-capemgr bone_capemgr.9: Skipping loading of disabled cape with part# BB-BONELT-HDMI
bone-capemgr bone_capemgr.9: Skipping loading of disabled cape with part# BB-BONELT-HDMIN
bone-capemgr bone_capemgr.9: initialized OK.
OneNAND driver initializing
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_ncm
bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
bone-capemgr bone_capemgr.9: slot #4: #2 overlays
bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc musb-hdrc.0.auto: pdev->id = 0
musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
musb-hdrc musb-hdrc.0.auto: *** mode=3
musb-hdrc musb-hdrc.0.auto: *** power=250
musb-hdrc musb-hdrc.1.auto: pdev->id = 1
musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
musb-hdrc musb-hdrc.1.auto: *** mode=1
musb-hdrc musb-hdrc.1.auto: *** power=250
musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 3.8.13-bone47 musb-hcd
usb usb1: SerialNumber: musb-hdrc.1.auto
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: individual port power switching
hub 1-0:1.0: no over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 10ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
mousedev: PS/2 mouse device common for all mice
omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
44e3e000.rtc: already running
i2c /dev entries driver
pps_ldisc: PPS line discipline registered
Driver for 1-wire Dallas network protocol.
omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
of_get_named_gpio_flags exited with status 6
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
omap_hsmmc mmc.5: Failed to get rstctl; not using any
edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
mmc.5 supply vmmc_aux not found, using dummy regulator
omap_hsmmc mmc.5: pins are not configured from the driver
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
of_get_named_gpio_flags: can't parse gpios property
gpio-rctrl rstctl.4: gpio_rctrl_request eMMC_RSTn
omap_hsmmc mmc.11: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
gpio-rctrl rstctl.4: gpio_rctrl_deassert eMMC_RSTn
edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
mmc.11 supply vmmc_aux not found, using dummy regulator
omap_hsmmc mmc.11: pins are not configured from the driver
pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
leds-gpio gpio-leds.8: pins are not configured from the driver
of_get_named_gpio_flags exited with status 53
of_get_named_gpio_flags exited with status 54
of_get_named_gpio_flags exited with status 55
of_get_named_gpio_flags exited with status 56
of_get_named_gpio_flags exited with status 53
of_get_named_gpio_flags exited with status 54
of_get_named_gpio_flags exited with status 55
of_get_named_gpio_flags exited with status 56
ledtrig-cpu: registered to indicate activity on CPUs
edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
omap-sham 53100000.sham: hw accel on OMAP rev 4.3
omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
registered taskstats version 1
[drm:tilcdc_drm_init], init
davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
davinci_mdio 4a101000.mdio: detected phy mask fffffffe
mmc1: BKOPS_EN bit is not set
libphy: 4a101000.mdio: probed
davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
Detected MACID = c8:a0:30:a7:a6:d2
cpsw 4a100000.ethernet: NAPI disabled
omap_rtc 44e3e000.rtc: setting system clock to 2014-05-05 20:08:07 UTC (1399320487)
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 MMC02G 1.78 GiB
ALSA device list:
No soundcards found.
Freeing init memory: 236K
mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
mmcblk0: p1 p2
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
systemd-udevd[99]: starting version 204
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (152) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (162) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (165) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (155) terminated with status 5
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
systemd-udevd[298]: starting version 204
pruss_uio 4a300000.pruss: pins are not configured from the driver
init: avahi-cups-reload main process (397) terminated with status 1
net eth0: initializing cpsw version 1.12 (0)
net eth0: phy found : id is : 0x7c0f1
libphy: PHY 4a101000.mdio:01 not found
net eth0: phy 4a101000.mdio:01 not found on slave 1
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: udev-fallback-graphics main process (483) terminated with status 1
libphy: 4a101000.mdio:00 - Link is Up - 100/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
gadget: using random self ethernet address
usb0: MAC fa:e1:cd:d5:41:8a
usb0: HOST MAC c8:a0:30:a7:a6:d4
gadget: Mass Storage Function, version: 2009/09/11
gadget: Number of LUNs=1
lun0: LUN: removable file: /dev/mmcblk0p1
gadget: Multifunction Composite Gadget
gadget: g_multi ready
musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: MUSB HDRC host driver
usb usb2: Manufacturer: Linux 3.8.13-bone47 musb-hcd
usb usb2: SerialNumber: musb-hdrc.0.auto
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: individual port power switching
hub 2-0:1.0: no over-current protection
hub 2-0:1.0: Single TT
hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-0:1.0: power on to power good time: 10ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: enabling power on all ports
hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend, wakeup 1
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning