dmesg - test1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dcfc9fff] usable
BIOS-e820: [mem 0x00000000dcfca000-0x00000000dd6c8fff] reserved
BIOS-e820: [mem 0x00000000dd6c9000-0x00000000dd754fff] usable
BIOS-e820: [mem 0x00000000dd755000-0x00000000dd7f2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd7f3000-0x00000000dedcdfff] reserved
BIOS-e820: [mem 0x00000000dedce000-0x00000000dedcefff] usable
BIOS-e820: [mem 0x00000000dedcf000-0x00000000dee11fff] ACPI NVS
BIOS-e820: [mem 0x00000000dee12000-0x00000000df232fff] usable
BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7758/B75A-G43 (MS-7758), BIOS V10.5 10/12/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 0E0000000 mask FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 3584MB, range: 512MB, type UC
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16864MB, range: 32MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x41de00000-0x41dffffff]
[mem 0x41de00000-0x41dffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41ddfffff]
[mem 0x41c000000-0x41ddfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdcfc9fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdcdfffff] page 2M
[mem 0xdce00000-0xdcfc9fff] page 4k
init_memory_mapping: [mem 0xdd6c9000-0xdd754fff]
[mem 0xdd6c9000-0xdd754fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xdedce000-0xdedcefff]
[mem 0xdedce000-0xdedcefff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xdee12000-0xdf232fff]
[mem 0xdee12000-0xdeffffff] page 4k
[mem 0xdf000000-0xdf1fffff] page 2M
[mem 0xdf200000-0xdf232fff] page 4k
init_memory_mapping: [mem 0xdf7f4000-0xdf7fffff]
[mem 0xdf7f4000-0xdf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x35ba0000-0x36dc7fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000dd7e3080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000dd7ed0c0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dd7e3190 009F2F (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000dd7f1080 000040
ACPI: APIC 00000000dd7ed1d0 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000dd7ed248 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000dd7ed290 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 00000000dd7ed2d0 0007CA (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: HPET 00000000dd7edaa0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000dd7edad8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000dd7ede48 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000dd7ee7f8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 00000000dd7ef290 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 00000000dd7ef310 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
Initmem setup node 0 [mem 0x00000000-0x41dffffff]
NODE_DATA [mem 0x41dfe8000-0x41dfecfff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040d600000-ffff88041d5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdcfc9fff]
node 0: [mem 0xdd6c9000-0xdd754fff]
node 0: [mem 0xdedce000-0xdedcefff]
node 0: [mem 0xdee12000-0xdf232fff]
node 0: [mem 0xdf7f4000-0xdf7fffff]
node 0: [mem 0x100000000-0x41dffffff]
On node 0 totalpages: 4174880
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14099 pages used for memmap
DMA32 zone: 902276 pages, LIFO batch:31
Normal zone: 51072 pages used for memmap
Normal zone: 3268608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdcfca000-0xdd6c8fff]
PM: Registered nosave memory: [mem 0xdd755000-0xdd7f2fff]
PM: Registered nosave memory: [mem 0xdd7f3000-0xdedcdfff]
PM: Registered nosave memory: [mem 0xdedcf000-0xdee11fff]
PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88041dc00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4109624
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16335564K/16699520K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 363956K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.137 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.27 BogoMIPS (lpj=13568548)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000dd65f000 end: 0x000000dd66cfff
IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27137.09 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdd755000-0xdd7f2fff] (647168 bytes)
PM: Registering ACPI NVS region [mem 0xdedcf000-0xdee11fff] (274432 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 16:09:01, date: 05/04/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000dd676018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dd677a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dd678c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7216000-0xf72163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7215000-0xf72157ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7214000-0xf72140ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xf7180000-0xf718ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdcfca000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd755000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdedcf000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a1f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [dma 3]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd8fca000-0xdcfca000] (64MB) mapped at [ffff8800d8fca000-ffff8800dcfc9fff]
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1399219741.388:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31941
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 2560x1440x32, linelength=10240, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005b80000, using 14400k, total 14400k
Console: switching to colour frame buffer device 320x90
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7217000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7216000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:605:185
thermal LNXTHERM:01: hash matches
acpi device:44: hash matches
rtc_cmos 00:05: setting system clock to 2014-05-04 16:09:02 UTC (1399219742)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018b2000, d4:3d:7e:4e:50:c0, XID 0c900800 IRQ 43
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 44
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215200 irq 44
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215300 irq 44
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8804075235f0), AE_NOT_FOUND (20131115/psparse-536)
ata3.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8804075235f0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8804075236e0), AE_NOT_FOUND (20131115/psparse-536)
ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
ata3.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8804075236e0), AE_NOT_FOUND (20131115/psparse-536)
ata5.00: configured for UDMA/133
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880407523500), AE_NOT_FOUND (20131115/psparse-536)
ata1.00: ATA-9: SanDisk SDSSDP128G, 2.0.0, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880407523500), AE_NOT_FOUND (20131115/psparse-536)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP12 2.0. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 3392.293 MHz
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
random: init urandom read with 70 bits of entropy available
init: plymouth-upstart-bridge main process (184) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
init: plymouth-upstart-bridge main process (193) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (194) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (195) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (196) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (199) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (200) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (202) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (204) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52e
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Receiver
usb 1-1.2: Manufacturer: Logitech
Adding 16628732k swap on /dev/sda5. Priority:-1 extents:1 across:16628732k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[314]: starting version 204
lp: driver loaded but no devices found
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
random: nonblocking pool is initialized
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
wmi: Mapper loaded
type=1400 audit(1399212543.545:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=380 comm="apparmor_parser"
type=1400 audit(1399212543.545:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=380 comm="apparmor_parser"
type=1400 audit(1399212543.545:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
type=1400 audit(1399212543.545:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=380 comm="apparmor_parser"
type=1400 audit(1399212543.545:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
type=1400 audit(1399212543.545:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
SKU: Nid=0x1d sku_cfg=0x4007f603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
cfg80211: Calling CRDA to update world regulatory domain
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
lp0: using parport0 (interrupt-driven).
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90007000000, irq=18
intel_rapl: domain uncore energy ctr 0:0 not working, skip
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input14
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: AU
cfg80211: Regulatory domain changed to country: AU
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
checking generic (f1000000 e10000) vs hw (e8000000 8000000)
checking generic (f1000000 e10000) vs hw (f0000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0d90a0a1
nouveau [ DEVICE][0000:01:00.0] Chipset: GF119 (NVD9)
nouveau [ DEVICE][0000:01:00.0] Family : NVD0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 75.19.55.00.02
nouveau 0000:01:00.0: irq 47 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8804064fe000] reclocking of this ram type unsupported
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 810 MHz memory 600 MHz
nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[TTM] Zone kernel: Available graphics memory: 8178536 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000000
nouveau [ DRM] DCB outp 01: 01000302 00020030
nouveau [ DRM] DCB outp 02: 02011362 00020010
nouveau [ DRM] DCB outp 03: 04022310 00000000
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] MM: using COPY0 for buffer copies
Switched to clocksource tsc
nouveau [ DRM] allocated 2560x1440 fb: 0x60000, bo ffff880403742000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
init: failsafe main process (669) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1399212544.326:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=761 comm="apparmor_parser"
type=1400 audit(1399212544.326:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=761 comm="apparmor_parser"
type=1400 audit(1399212544.326:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=761 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (767) killed by HUP signal
init: cups main process ended, respawning
init: samba-ad-dc main process (795) terminated with status 1
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with fc:8b:98:de:10:8b
wlan0: send auth to fc:8b:98:de:10:8b (try 1/3)
wlan0: authenticated
wlan0: associate with fc:8b:98:de:10:8b (try 1/3)
wlan0: RX AssocResp from fc:8b:98:de:10:8b (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: deauthenticating from fc:8b:98:de:10:8b by local choice (reason=2)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with fc:8b:98:de:10:8b
wlan0: send auth to fc:8b:98:de:10:8b (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticated
wlan0: associate with fc:8b:98:de:10:8b (try 1/3)
wlan0: RX AssocResp from fc:8b:98:de:10:8b (capab=0x431 status=0 aid=2)
wlan0: associated
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=0781, idProduct=5530
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: SanDisk Cruzer
usb 2-1.5: Manufacturer: SanDisk
usb 2-1.5: SerialNumber: 3247900C5B1075FD
usb-storage 2-1.5:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1.5:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: Direct-Access SanDisk SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: CD-ROM SanDisk SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sr1: scsi3-mmc drive: 48x/48x tray
sr 6:0:0:1: Attached scsi CD-ROM sr1
sr 6:0:0:1: Attached scsi generic sg4 type 5
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdc] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sr 6:0:0:1: GET_EVENT and TUR disagree continuously, suppress GET_EVENT events
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
systemd-hostnamed[2418]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
audit_printk_skb: 171 callbacks suppressed
type=1400 audit(1399212574.385:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2496 comm="apparmor_parser"
type=1400 audit(1399212574.385:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2496 comm="apparmor_parser"
type=1400 audit(1399212574.385:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2496 comm="apparmor_parser"
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (sdb3): recovery complete
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[3486]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[4702]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!