dmesg - nas4free
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [ffff88000009fff0] 9fff0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000007fff0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fff0000 page 4k
kernel direct mapping tables up to 7fff0000 @ 1fffc000-20000000
RAMDISK: 36d26000 - 3768b000
ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
ACPI: XSDT 000000007fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 000000007fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 000000007fff0470 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20110527)
ACPI: FACS 000000007fff0200 00040
ACPI: APIC 000000007fff0240 0005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 000000007fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20110527)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fff0000
Initmem setup node 0 0000000000000000-000000007fff0000
NODE_DATA [000000007ffeb000 - 000000007ffeffff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fff0
On node 0 totalpages: 524159
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513064 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ffc0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82944 r8192 d23552 u1048576
pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516986
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049592k/2097088k available (3428k kernel code, 452k absent, 47044k reserved, 3310k data, 580k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:512 16
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2172.402 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4344.80 BogoMIPS (lpj=8689608)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) II Neo N54L Dual-Core Processor stepping 03
Performance Events: Broken PMU hardware detected, using software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
mce: CPU supports 0 MCE banks
NMI watchdog disabled (cpu1): hardware events not enabled
Brought up 2 CPUs
Total of 2 processors activated (8584.77 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
pci 0000:00:0d.0: reg 10: [io 0xd040-0xd047]
pci 0000:00:0d.0: reg 18: [io 0xd050-0xd057]
pci 0000:00:0d.0: reg 20: [io 0xd060-0xd06f]
pci 0000:00:0d.0: reg 24: [mem 0xf0804000-0xf0805fff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007fff0000 - 000000007fffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xffdfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [irq 1]
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:04: [io 0x0378-0x037f]
pnp 00:04: [io 0x0778-0x077f]
pnp 00:04: [irq 7]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
hrtimer: interrupt took 12412766 ns
Freeing initrd memory: 9620k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1399111334.536:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4021
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Table is not found!
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2014-05-03 10:02:15 UTC (1399111335)
Initializing network drop monitor service
Freeing unused kernel memory: 580k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 652k freed
Freeing unused kernel memory: 688k freed
udevd[48]: starting version 175
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: setting latency timer to 64
SCSI subsystem initialized
libata version 3.00 loaded.
e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:40:5f:4d
e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
ahci 0000:00:0d.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0804000 port 0xf0804100 irq 21
ata2: SATA max UDMA/133 abar m8192@0xf0804000 port 0xf0804180 irq 21
ata3: SATA max UDMA/133 abar m8192@0xf0804000 port 0xf0804200 irq 21
ata4: SATA max UDMA/133 abar m8192@0xf0804000 port 0xf0804280 irq 21
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata6: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 33554432 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata3.00: applying bridge limits
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 33554432 512-byte logical blocks: (17.1 GB/16.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sda: sda1 sda2
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[305]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
ACPI: Sleep Button [SLPF]
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: PC Speaker as /devices/platform/pcspkr/input/input3
ACPI: AC Adapter [AC] (on-line)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Adding 2096124k swap on /dev/sda2. Priority:-1 extents:1 across:2096124k
EXT4-fs (sda1): re-mounted. Opts: (null)
EXT4-fs (sda1): re-mounted. Opts: discard,user_xattr,acl,barrier=1
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
EXT4-fs (sda1): Unaligned AIO/DIO on inode 656204 by fio; performance will be poor.
sched: RT throttling activated
ata1.00: exception Emask 0x0 SAct 0xfe781e SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:08:00:a8:9d/04:00:00:00:00/40 tag 1 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:10:00:bc:9d/04:00:00:00:00/40 tag 2 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:18:00:c0:9d/04:00:00:00:00/40 tag 3 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:20:00:c4:9d/04:00:00:00:00/40 tag 4 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:58:00:f0:9a/04:00:00:00:00/40 tag 11 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:60:00:f8:9a/04:00:00:00:00/40 tag 12 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:68:00:f4:9a/04:00:00:00:00/40 tag 13 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:70:00:00:9b/04:00:00:00:00/40 tag 14 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:88:00:94:9d/04:00:00:00:00/40 tag 17 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:90:00:fc:9a/04:00:00:00:00/40 tag 18 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:98:00:04:9b/04:00:00:00:00/40 tag 19 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:a0:00:88:9d/04:00:00:00:00/40 tag 20 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:a8:00:8c:9d/04:00:00:00:00/40 tag 21 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:b0:00:a4:9d/04:00:00:00:00/40 tag 22 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:b8:00:b8:9d/04:00:00:00:00/40 tag 23 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x7801 SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:00:00:b8:9d/04:00:00:00:00/40 tag 0 ncq 524288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:58:00:c4:9d/04:00:00:00:00/40 tag 11 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:60:00:c0:9d/04:00:00:00:00/40 tag 12 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:68:00:bc:9d/04:00:00:00:00/40 tag 13 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/00:70:00:a8:9d/04:00:00:00:00/40 tag 14 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
sd 0:0:0:0: [sda] Unhandled error code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 9d a4 00 00 04 00 00
end_request: I/O error, dev sda, sector 10331136
Buffer I/O error on device sda1, logical block 1291136
Buffer I/O error on device sda1, logical block 1291137
Buffer I/O error on device sda1, logical block 1291138
Buffer I/O error on device sda1, logical block 1291139
Buffer I/O error on device sda1, logical block 1291140
Buffer I/O error on device sda1, logical block 1291141
Buffer I/O error on device sda1, logical block 1291142
Buffer I/O error on device sda1, logical block 1291143
Buffer I/O error on device sda1, logical block 1291144
Buffer I/O error on device sda1, logical block 1291145
Buffer I/O error on device sda1, logical block 1291146
Buffer I/O error on device sda1, logical block 1291147
Buffer I/O error on device sda1, logical block 1291148
Buffer I/O error on device sda1, logical block 1291149
Buffer I/O error on device sda1, logical block 1291150
Buffer I/O error on device sda1, logical block 1291151
Buffer I/O error on device sda1, logical block 1291152
Buffer I/O error on device sda1, logical block 1291153
Buffer I/O error on device sda1, logical block 1291154
Buffer I/O error on device sda1, logical block 1291155
Buffer I/O error on device sda1, logical block 1291156
Buffer I/O error on device sda1, logical block 1291157
Buffer I/O error on device sda1, logical block 1291158
Buffer I/O error on device sda1, logical block 1291159
Buffer I/O error on device sda1, logical block 1291160
Buffer I/O error on device sda1, logical block 1291161
Buffer I/O error on device sda1, logical block 1291162
Buffer I/O error on device sda1, logical block 1291163
Buffer I/O error on device sda1, logical block 1291164
Buffer I/O error on device sda1, logical block 1291165
Buffer I/O error on device sda1, logical block 1291166
Buffer I/O error on device sda1, logical block 1291167
Buffer I/O error on device sda1, logical block 1291168
Buffer I/O error on device sda1, logical block 1291169
Buffer I/O error on device sda1, logical block 1291170
Buffer I/O error on device sda1, logical block 1291171
Buffer I/O error on device sda1, logical block 1291172
Buffer I/O error on device sda1, logical block 1291173
Buffer I/O error on device sda1, logical block 1291174
Buffer I/O error on device sda1, logical block 1291175
Buffer I/O error on device sda1, logical block 1291176
Buffer I/O error on device sda1, logical block 1291177
Buffer I/O error on device sda1, logical block 1291178
Buffer I/O error on device sda1, logical block 1291179
Buffer I/O error on device sda1, logical block 1291180
Buffer I/O error on device sda1, logical block 1291181
Buffer I/O error on device sda1, logical block 1291182
Buffer I/O error on device sda1, logical block 1291183
Buffer I/O error on device sda1, logical block 1291184
Buffer I/O error on device sda1, logical block 1291185
Buffer I/O error on device sda1, logical block 1291186
Buffer I/O error on device sda1, logical block 1291187
Buffer I/O error on device sda1, logical block 1291188
Buffer I/O error on device sda1, logical block 1291189
Buffer I/O error on device sda1, logical block 1291190
Buffer I/O error on device sda1, logical block 1291191
Buffer I/O error on device sda1, logical block 1291192
Buffer I/O error on device sda1, logical block 1291193
Buffer I/O error on device sda1, logical block 1291194
Buffer I/O error on device sda1, logical block 1291195
Buffer I/O error on device sda1, logical block 1291196
Buffer I/O error on device sda1, logical block 1291197
Buffer I/O error on device sda1, logical block 1291198
Buffer I/O error on device sda1, logical block 1291199
Buffer I/O error on device sda1, logical block 1291200
Buffer I/O error on device sda1, logical block 1291201
Buffer I/O error on device sda1, logical block 1291202
Buffer I/O error on device sda1, logical block 1291203
Buffer I/O error on device sda1, logical block 1291204
Buffer I/O error on device sda1, logical block 1291205
Buffer I/O error on device sda1, logical block 1291206
Buffer I/O error on device sda1, logical block 1291207
Buffer I/O error on device sda1, logical block 1291208
Buffer I/O error on device sda1, logical block 1291209
Buffer I/O error on device sda1, logical block 1291210
Buffer I/O error on device sda1, logical block 1291211
Buffer I/O error on device sda1, logical block 1291212
Buffer I/O error on device sda1, logical block 1291213
Buffer I/O error on device sda1, logical block 1291214
Buffer I/O error on device sda1, logical block 1291215
Buffer I/O error on device sda1, logical block 1291216
Buffer I/O error on device sda1, logical block 1291217
Buffer I/O error on device sda1, logical block 1291218
Buffer I/O error on device sda1, logical block 1291219
Buffer I/O error on device sda1, logical block 1291220
Buffer I/O error on device sda1, logical block 1291221
Buffer I/O error on device sda1, logical block 1291222
Buffer I/O error on device sda1, logical block 1291223
Buffer I/O error on device sda1, logical block 1291224
Buffer I/O error on device sda1, logical block 1291225
Buffer I/O error on device sda1, logical block 1291226
Buffer I/O error on device sda1, logical block 1291227
Buffer I/O error on device sda1, logical block 1291228
Buffer I/O error on device sda1, logical block 1291229
Buffer I/O error on device sda1, logical block 1291230
Buffer I/O error on device sda1, logical block 1291231
Buffer I/O error on device sda1, logical block 1291232
Buffer I/O error on device sda1, logical block 1291233
Buffer I/O error on device sda1, logical block 1291234
Buffer I/O error on device sda1, logical block 1291235
Buffer I/O error on device sda1, logical block 1291236
Buffer I/O error on device sda1, logical block 1291237
Buffer I/O error on device sda1, logical block 1291238
Buffer I/O error on device sda1, logical block 1291239
Buffer I/O error on device sda1, logical block 1291240
Buffer I/O error on device sda1, logical block 1291241
Buffer I/O error on device sda1, logical block 1291242
Buffer I/O error on device sda1, logical block 1291243
Buffer I/O error on device sda1, logical block 1291244
Buffer I/O error on device sda1, logical block 1291245
Buffer I/O error on device sda1, logical block 1291246
Buffer I/O error on device sda1, logical block 1291247
Buffer I/O error on device sda1, logical block 1291248
Buffer I/O error on device sda1, logical block 1291249
Buffer I/O error on device sda1, logical block 1291250
Buffer I/O error on device sda1, logical block 1291251
Buffer I/O error on device sda1, logical block 1291252
Buffer I/O error on device sda1, logical block 1291253
Buffer I/O error on device sda1, logical block 1291254
Buffer I/O error on device sda1, logical block 1291255
Buffer I/O error on device sda1, logical block 1291256
Buffer I/O error on device sda1, logical block 1291257
Buffer I/O error on device sda1, logical block 1291258
Buffer I/O error on device sda1, logical block 1291259
Buffer I/O error on device sda1, logical block 1291260
Buffer I/O error on device sda1, logical block 1291261
Buffer I/O error on device sda1, logical block 1291262
Buffer I/O error on device sda1, logical block 1291263
EXT4-fs warning (device sda1): ext4_end_bio:250: I/O error writing to inode 657272 (offset 4130865152 size 524288 starting block 1291520)
ata1: EH complete
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8
JBD2: Detected IO errors while flushing file data on sda1-8