dmesg - Benchmarking

Return To Benchmarking System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-19-generic (buildd@comet) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #33-Ubuntu SMP Tue Mar 11 18:48:34 UTC 2014 (Ubuntu 3.11.0-19.33-generic 3.11.10.5)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000beeaffff] usable
BIOS-e820: [mem 0x00000000beeb0000-0x00000000beecbfff] ACPI data
BIOS-e820: [mem 0x00000000beecc000-0x00000000beefffff] ACPI NVS
BIOS-e820: [mem 0x00000000bef00000-0x00000000beffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: LENOVO 6457D21/6457D21, BIOS 7LETC9WW (2.29 ) 03/18/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xbeeb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0BF000000 mask FFF000000 uncachable
  1 base 000000000 mask F80000000 write-back
  2 base 080000000 mask FC0000000 write-back
  3 base 0BEF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3056MB, range: 16MB, type UC
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 3055MB, range: 1MB, type UC
total RAM covered: 3055M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 32M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3055MB, range: 1MB, type UC
reg 3, base: 3056MB, range: 16MB, type UC
found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff8800000f68f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0xbec00000-0xbedfffff]
 [mem 0xbec00000-0xbedfffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0xbc000000-0xbebfffff]
 [mem 0xbc000000-0xbebfffff] page 2M
init_memory_mapping: [mem 0x80000000-0xbbffffff]
 [mem 0x80000000-0xbbffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x7fffffff] page 2M
init_memory_mapping: [mem 0xbee00000-0xbeeaffff]
 [mem 0xbee00000-0xbeeaffff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x35ea8000-0x36f4bfff]
ACPI: RSDP 00000000000f68c0 00024 (v02 LENOVO)
ACPI: XSDT 00000000beebb496 0009C (v01 LENOVO TP-7U    00002290  LTP 00000000)
ACPI: FACP 00000000beebb600 000F4 (v03 LENOVO TP-7U    00002290 LNVO 00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20130517/tbfadt-572)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20130517/tbfadt-603)
ACPI: DSDT 00000000beebba1d 1003C (v01 LENOVO TP-7U    00002290 MSFT 03000000)
ACPI: FACS 00000000beee4000 00040
ACPI: SSDT 00000000beebb7b4 00269 (v01 LENOVO TP-7U    00002290 MSFT 03000000)
ACPI: ECDT 00000000beecba59 00052 (v01 LENOVO TP-7U    00002290 LNVO 00000001)
ACPI: TCPA 00000000beecbaab 00032 (v02 LENOVO TP-7U    00002290 LNVO 00000001)
ACPI: APIC 00000000beecbadd 00068 (v01 LENOVO TP-7U    00002290 LNVO 00000001)
ACPI: MCFG 00000000beecbb45 0003C (v01 LENOVO TP-7U    00002290 LNVO 00000001)
ACPI: HPET 00000000beecbb81 00038 (v01 LENOVO TP-7U    00002290 LNVO 00000001)
ACPI: SLIC 00000000beecbbb9 00176 (v01 LENOVO TP-7U    00002290  LTP 00000000)
ACPI: SLAC 00000000beecbdf0 00176 (v01 LENOVO TP-7U    00002290  LTP 00000000)
ACPI: BOOT 00000000beecbf66 00028 (v01 LENOVO TP-7U    00002290  LTP 00000001)
ACPI: ASF! 00000000beecbf8e 00072 (v16 LENOVO TP-7U    00002290 PTL  00000001)
ACPI: SSDT 00000000beee271b 0025F (v01 LENOVO TP-7U    00002290 INTL 20050513)
ACPI: SSDT 00000000beee297a 000A6 (v01 LENOVO TP-7U    00002290 INTL 20050513)
ACPI: SSDT 00000000beee2a20 004F7 (v01 LENOVO TP-7U    00002290 INTL 20050513)
ACPI: SSDT 00000000beee2f17 001D8 (v01 LENOVO TP-7U    00002290 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000000beeaffff]
Initmem setup node 0 [mem 0x00000000-0xbeeaffff]
  NODE_DATA [mem 0xbeeab000-0xbeeaffff]
 [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bb400000-ffff8800be3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009cfff]
  node   0: [mem 0x00100000-0xbeeaffff]
On node 0 totalpages: 781900
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 12155 pages used for memmap
  DMA32 zone: 777904 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0xbf000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8800bea00000 s86720 r8192 d23872 u1048576
pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 769660
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3044592K/3127600K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1368K init, 1420K bss, 83008K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 12582912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.561 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.12 BogoMIPS (lpj=10374244)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27857 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T9500  @ 2.60GHz (fam: 06, model: 17, stepping: 06)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
smpboot: Booting Node   0, Processors  #1 OK
TSC synchronization [CPU#0 -> CPU#1]:
Measured 1343095 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
smpboot: Total of 2 processors activated (10374.24 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbeecc000-0xbeefffff] (212992 bytes)
regulator-dummy: no parameters
RTC time: 19:10:02, date: 05/01/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: SSDT 00000000beee1b32 00306 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00306 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000beee1ebd 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 00000000beee1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000beee1e38 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xbf000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe225000-0xfe225fff]
pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x1860-0x187f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x1880-0x189f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe226c00-0xfe226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe220000-0xfe223fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x18a0-0x18bf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x18c0-0x18df]
pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x18e0-0x18ff]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe227000-0xfe2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io  0x1830-0x183f]
pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 0x14: [io  0x1c1c-0x1c1f]
pci 0000:00:1f.2: reg 0x18: [io  0x1c40-0x1c47]
pci 0000:00:1f.2: reg 0x1c: [io  0x1c18-0x1c1b]
pci 0000:00:1f.2: reg 0x20: [io  0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfe226000-0xfe2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe227400-0xfe2274ff]
pci 0000:00:1f.3: reg 0x20: [io  0x1c60-0x1c7f]
pci 0000:01:00.0: [10de:040c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd6000000-0xd6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd5ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd6ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf2fe000-0xdf2fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xdc100000-0xdf2fffff]
pci 0000:00:1c.1:   bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4:   bridge window [io  0x7000-0x7fff]
pci 0000:00:1c.4:   bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.4:   bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
pci 0000:15:00.0: reg 0x10: [mem 0xf8100000-0xf8100fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
pci 0000:15:00.2: reg 0x10: [mem 0xf8101000-0xf81010ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
pci 0000:15:00.4: reg 0x10: [mem 0xf8101800-0xf81018ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
pci 0000:15:00.5: reg 0x10: [mem 0xf8101c00-0xf8101cff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x8000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xf8100000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed4bfff] (subtractive decode)
pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbeeb0000-0xbfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbeffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: [io  0x1000-0x107f] could not be reserved
system 00:01: [io  0x1180-0x11bf] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x15e0-0x15ef] has been reserved
system 00:01: [io  0x1600-0x165f] could not be reserved
system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0b: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd6ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0xdc100000-0xdf2fffff]
pci 0000:00:1c.1:   bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xdf700000-0xdf7fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
pci 0000:00:1c.4:   bridge window [io  0x7000-0x7fff]
pci 0000:00:1c.4:   bridge window [mem 0xcc000000-0xcdffffff]
pci 0000:00:1c.4:   bridge window [mem 0xdf400000-0xdf4fffff 64bit pref]
pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff]
pci 0000:15:00.0: BAR 13: assigned [io  0x8000-0x80ff]
pci 0000:15:00.0: BAR 14: assigned [io  0x8400-0x84ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0:   bridge window [io  0x8000-0x80ff]
pci 0000:15:00.0:   bridge window [io  0x8400-0x84ff]
pci 0000:15:00.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0:   bridge window [mem 0xc0000000-0xc3ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0:   bridge window [io  0x8000-0xbfff]
pci 0000:00:1e.0:   bridge window [mem 0xf8100000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xbf000000-0xfebfffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd6ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xdc100000-0xdf2fffff]
pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfafffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:05: resource 2 [mem 0xdf700000-0xdf7fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:0d: resource 1 [mem 0xcc000000-0xcdffffff]
pci_bus 0000:0d: resource 2 [mem 0xdf400000-0xdf4fffff 64bit pref]
pci_bus 0000:15: resource 0 [io  0x8000-0xbfff]
pci_bus 0000:15: resource 1 [mem 0xf8100000-0xfbffffff]
pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:15: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:15: resource 10 [mem 0xbf000000-0xfebfffff]
pci_bus 0000:15: resource 11 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:16: resource 0 [io  0x8000-0x80ff]
pci_bus 0000:16: resource 1 [io  0x8400-0x84ff]
pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.2: power state changed by ACPI to D0
pci 0000:01:00.0: Boot video device
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17040K (ffff880035ea8000 - ffff880036f4c000)
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1398971402.464:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 5979
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Using ACPI for slot detection.
pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 17aa ss_did 20ad
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (36 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (33 C)
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata2: port disabled--ignoring
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-19-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5553b4b7b74ebe0a90f93fbc0d8e2b9c98211b47'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 14:698:191
acpi device:1d: hash matches
rtc_cmos 00:06: setting system clock to 2014-05-01 19:10:03 UTC (1398971403)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1368K (ffffffff81d10000 - ffffffff81e66000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[103]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: setting latency timer to 64
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:e2:12:a5:33
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 47
ata4: DUMMY
ata5: DUMMY
usb 1-4: new high-speed USB device number 4 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 521A PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8385532k swap on /dev/sda5.  Priority:-1 extents:1 across:8385532k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[274]: starting version 204
usb 3-1: new full-speed USB device number 2 using uhci_hcd
acpi device:06: registered as cooling_device2
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4
tpm_tis 00:0b: 1.2 TPM (device-id 0x3203, rev-id 9)
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x084c00a2
nouveau  [  DEVICE][0000:01:00.0] Chipset: G84 (NV84)
nouveau  [  DEVICE][0000:01:00.0] Family : NV50
nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
r592 0000:15:00.4: setting latency timer to 64
ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
r592: driver successfully loaded
lp: driver loaded but no devices found
r852 0000:15:00.5: setting latency timer to 64
r852: driver loaded successfully
nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
nouveau  [   VBIOS][0000:01:00.0] BIT signature found
nouveau  [   VBIOS][0000:01:00.0] version 60.84.51.00.00
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
nouveau  [     PFB][0000:01:00.0] RAM type: GDDR3
nouveau  [     PFB][0000:01:00.0] RAM size: 256 MiB
nouveau  [     PFB][0000:01:00.0]    ZCOMP: 1892 tags
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
type=1400 audit(1398971405.116:2): apparmor="STATUS" operation="profile_load" parent=300 profile="unconfined" name="/sbin/dhclient" pid=320 comm="apparmor_parser"
type=1400 audit(1398971405.116:3): apparmor="STATUS" operation="profile_load" parent=300 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=320 comm="apparmor_parser"
type=1400 audit(1398971405.116:4): apparmor="STATUS" operation="profile_load" parent=300 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=320 comm="apparmor_parser"
type=1400 audit(1398971405.120:5): apparmor="STATUS" operation="profile_replace" parent=300 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=320 comm="apparmor_parser"
type=1400 audit(1398971405.120:6): apparmor="STATUS" operation="profile_replace" parent=300 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=320 comm="apparmor_parser"
type=1400 audit(1398971405.120:7): apparmor="STATUS" operation="profile_replace" parent=300 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=320 comm="apparmor_parser"
tpm_tis 00:0b: TPM is disabled/deactivated (0x6)
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Non-volatile memory driver v1.3
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x8000-0xbfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8100000-0xfbffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8100000-0xfbffffff:
 excluding 0xf8100000-0xf84effff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
 excluding 0xf4000000-0xf7ffffff
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: 
thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61p, model 6457D21
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
nouveau  [  PTHERM][0000:01:00.0] fan management: disabled
nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
nouveau E[  PTHERM][0000:01:00.0] unhandled intr 0x000001e0
[TTM] Zone  kernel: Available graphics memory: 1532420 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau  [     DRM] VRAM: 256 MiB
nouveau  [     DRM] GART: 1048576 MiB
nouveau  [     DRM] TMDS table version 2.0
nouveau  [     DRM] DCB version 4.0
nouveau  [     DRM] DCB outp 00: 01000323 00010034
nouveau  [     DRM] DCB outp 01: 02811300 00000028
nouveau  [     DRM] DCB outp 02: 02822312 00010030
nouveau  [     DRM] DCB conn 00: 0040
nouveau  [     DRM] DCB conn 01: 0100
nouveau  [     DRM] DCB conn 02: 1231
lp0: using parport0 (interrupt-driven).
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau  [     DRM] ACPI backlight interface available, not registering our own
nouveau  [     DRM] 3 available performance level(s)
nouveau  [     DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
nouveau  [     DRM] 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
nouveau  [     DRM] 2: core 475MHz shader 950MHz memory 702MHz voltage 1200mV fanspeed 100%
nouveau  [     DRM] c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
usb 3-2: new full-speed USB device number 3 using uhci_hcd
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
nouveau  [     DRM] MM: using CRYPT for buffer copies
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
init: avahi-cups-reload main process (490) terminated with status 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1398971406.280:8): apparmor="STATUS" operation="profile_load" parent=500 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=511 comm="apparmor_parser"
type=1400 audit(1398971406.280:9): apparmor="STATUS" operation="profile_load" parent=500 profile="unconfined" name="/usr/sbin/cupsd" pid=511 comm="apparmor_parser"
type=1400 audit(1398971406.280:10): apparmor="STATUS" operation="profile_replace" parent=500 profile="unconfined" name="/usr/sbin/cupsd" pid=511 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
nouveau  [     DRM] allocated 1920x1200 fb: 0x70000, bo ffff8800b7981400
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
fbcon: nouveaufb (fb0) is primary device
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
iwl4965 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwl4965 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl4965 0000:03:00.0: irq 49 for MSI/MSI-X
iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver btusb
usb 6-2: new full-speed USB device number 2 using uhci_hcd
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
 excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
 excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
 excluding 0x60000000-0x60ffffff
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f
microcode: Microcode Update Driver: v2.00 , Peter Oruba
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0, board id: 71, fw id: 496542
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
kvm: disabled by bios
kvm: disabled by bios
usb 6-2: New USB device found, idVendor=17ef, idProduct=1003
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Integrated Smart Card Reader
usb 6-2: Manufacturer: Lenovo
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Console: switching to colour frame buffer device 240x75
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
vesafb: module verification failed: signature and/or required key missing - tainting kernel
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90008480000, using 9024k, total 9024k
fb1: VESA VGA frame buffer device
init: failsafe main process (532) killed by TERM signal
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 eth2: Link Speed was downgraded by SmartSpeed
e1000e 0000:00:19.0 eth2: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
perf samples too long (2572 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
systemd-hostnamed[2517]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[2854]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[3679]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
show_signal_msg: 165 callbacks suppressed
conftest[22351]: segfault at 0 ip 00000000004005c0 sp 00007fff65721030 error 4 in conftest[400000+1000]
conftest[22380]: segfault at 0 ip 00007fc9772d0bc6 sp 00007fff8692f878 error 4 in libc-2.17.so[7fc97718c000+1bd000]

Return To Benchmarking System Information