dmesg - bork2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-19-generic (buildd@comet) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #33-Ubuntu SMP Tue Mar 11 18:48:34 UTC 2014 (Ubuntu 3.11.0-19.33-generic 3.11.10.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000af63efff] usable
BIOS-e820: [mem 0x00000000af63f000-0x00000000af6befff] reserved
BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: TOSHIBA SATELLITE L755/Base Board Product Name, BIOS 3.00 12/30/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x14f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0AF800000 mask FFF800000 uncachable
3 base 0B0000000 mask FF0000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask FC0000000 write-back
6 base 140000000 mask FF0000000 write-back
7 base 14F800000 mask FFF800000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x14f600000-0x14f7fffff]
[mem 0x14f600000-0x14f7fffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x14c000000-0x14f5fffff]
[mem 0x14c000000-0x14f5fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x14bffffff]
[mem 0x100000000-0x14bffffff] page 2M
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xaf63efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xaf5fffff] page 2M
[mem 0xaf600000-0xaf63efff] page 4k
init_memory_mapping: [mem 0xaf7ff000-0xaf7fffff]
[mem 0xaf7ff000-0xaf7fffff] page 4k
RAMDISK: [mem 0x35eae000-0x36f4efff]
ACPI: RSDP 00000000000fe020 00024 (v02 TOSQCI)
ACPI: XSDT 00000000af7fe120 00084 (v01 TOSQCI TOSQCI00 00000001 01000013)
ACPI: FACP 00000000af7fc000 000F4 (v04 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: DSDT 00000000af7eb000 0D313 (v01 TOSQCI TOSQCI00 00000000 MSFT 01000013)
ACPI: FACS 00000000af76d000 00040
ACPI: ASF! 00000000af7fd000 000A5 (v32 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: HPET 00000000af7fb000 00038 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: APIC 00000000af7fa000 0008C (v02 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: MCFG 00000000af7f9000 0003C (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: SLIC 00000000af7ea000 00176 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: WDAT 00000000af7e9000 00224 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: SSDT 00000000af7e7000 01068 (v01 INSYDE INSYDE 00001000 MSFT 01000013)
ACPI: BOOT 00000000af7e5000 00028 (v01 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: ASPT 00000000af7e2000 00034 (v07 TOSQCI TOSQCI00 00000001 MSFT 01000013)
ACPI: SSDT 00000000af7e1000 00845 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
ACPI: SSDT 00000000af7e0000 00996 (v01 PmRef CpuPm 00003000 INTL 20100121)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014f7fffff]
Initmem setup node 0 [mem 0x00000000-0x14f7fffff]
NODE_DATA [mem 0x14f7f8000-0x14f7fcfff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014edfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xaf63efff]
node 0: [mem 0xaf7ff000-0xaf7fffff]
node 0: [mem 0x100000000-0x14f7fffff]
On node 0 totalpages: 1043932
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 11161 pages used for memmap
DMA32 zone: 714304 pages, LIFO batch:31
Normal zone: 5088 pages used for memmap
Normal zone: 325632 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xaf63f000-0xaf6befff]
PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88014f400000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027598
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4009588K/4175728K available (7154K kernel code, 1083K rwdata, 3312K rodata, 1368K init, 1420K bss, 166140K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.393 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.78 BogoMIPS (lpj=9977572)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (ffffffff81e66000 - ffffffff81e6d000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27857 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19955.14 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
regulator-dummy: no parameters
RTC time: 23:40:59, date: 04/24/14
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000af670798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 00000000af671a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 00000000af66fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
_OSC request data:1 8 0
_OSC request data:1 1f 0
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpiphp_glue: can't evaluate _ADR (0x5)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc3404000-0xc340400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc340a000-0xc340a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc3400000-0xc3403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc3409000-0xc34093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4060-0x4067]
pci 0000:00:1f.2: reg 0x14: [io 0x40b4-0x40b7]
pci 0000:00:1f.2: reg 0x18: [io 0x4040-0x4047]
pci 0000:00:1f.2: reg 0x1c: [io 0x409c-0x409f]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc3408000-0xc34087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc3406000-0xc34060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [10de:1050] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc2000000-0xc2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xc3000000-0xc3003fff]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc30fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xc3300000-0xc3301fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [mem 0xc3300000-0xc33fffff]
pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
pci 0000:09:00.0: reg 0x10: [mem 0xc3200000-0xc320ffff 64bit]
pci 0000:09:00.0: supports D1
pci 0000:09:00.0: PME# supported from D0 D1 D3hot
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [mem 0xc3200000-0xc32fffff]
pci 0000:0a:00.0: [1969:2062] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [mem 0xc3100000-0xc313ffff 64bit]
pci 0000:0a:00.0: reg 0x18: [io 0x2000-0x207f]
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.6: bridge window [mem 0xc3100000-0xc31fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xaf63f000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
e820: reserve RAM buffer [mem 0x14f800000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1004-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xc3500000-0xc3500fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc3080000-0xc30fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc2000000-0xc30fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [mem 0xc3300000-0xc33fffff]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [mem 0xc3200000-0xc32fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.6: bridge window [mem 0xc3100000-0xc31fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc30fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xc3300000-0xc33fffff]
pci_bus 0000:09: resource 1 [mem 0xc3200000-0xc32fffff]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 1 [mem 0xc3100000-0xc31fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17028K (ffff880035eae000 - ffff880036f4f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xab63f000-0xaf63f000] (64MB) mapped at [ffff8800ab63f000-ffff8800af63efff]
Simple Boot Flag at 0x44 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1398382859.540:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7864
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc340a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc3409000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 45 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
usb usb3: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-19-generic xhci_hcd
usb usb4: SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5553b4b7b74ebe0a90f93fbc0d8e2b9c98211b47'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 10:365:707
rtc_cmos 00:05: setting system clock to 2014-04-24 23:40:59 UTC (1398382859)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-1: new high-speed USB device number 2 using ehci-pci
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1368K (ffffffff81d10000 - ffffffff81e66000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1028K (ffff8800016ff000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[124]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
atl1c 0000:0a:00.0: version 1.0.1.1-NAPI
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408100 irq 46
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408280 irq 46
ata5: SATA max UDMA/133 abar m2048@0xc3408000 port 0xc3408300 irq 46
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: TOSHIBA MK6475GSX, GT001M, max UDMA/100
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6475GS GT00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2494.334 MHz
usb 1-1.4: New USB device found, idVendor=04f2, idProduct=b2cf
usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-1.4: Product: TOSHIBA Web Camera - MP
usb 1-1.4: Manufacturer: Alcor Micro, Corp.
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1.6: new full-speed USB device number 4 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0930, idProduct=0215
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=0bda, idProduct=0138
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: USB2.0-CRW
usb 2-1.5: Manufacturer: Generic
usb 2-1.5: SerialNumber: 20090516388200000
usbcore: registered new interface driver usb-storage
ums-realtek 2-1.5:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-1.5:1.0
usbcore: registered new interface driver ums-realtek
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TO02, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB TO02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 2-1.5: USB disconnect, device number 3
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
Adding 4174844k swap on /dev/sda5. Priority:-1 extents:1 across:4174844k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[305]: starting version 204
lp: driver loaded but no devices found
[Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
wmi: Mapper loaded
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[drm] Initialized drm 1.1.0 20060810
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: Toshiba input device as /devices/virtual/input/input4
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.60 Wed Sep 25 14:28:26 PDT 2013
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
hda_codec: CX20585: BIOS auto-probing.
autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x23
Mic=0x1a
hda_codec: Enable sync_write for stable communication
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
hda-intel 0000:01:00.1: Enable delay in RIRB handling
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900109e0000, irq=17
type=1400 audit(1398382869.907:2): apparmor="STATUS" operation="profile_load" parent=372 profile="unconfined" name="/sbin/dhclient" pid=389 comm="apparmor_parser"
type=1400 audit(1398382869.907:3): apparmor="STATUS" operation="profile_load" parent=372 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser"
type=1400 audit(1398382869.907:4): apparmor="STATUS" operation="profile_load" parent=372 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
type=1400 audit(1398382869.907:5): apparmor="STATUS" operation="profile_replace" parent=372 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser"
type=1400 audit(1398382869.907:6): apparmor="STATUS" operation="profile_replace" parent=372 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
type=1400 audit(1398382869.911:7): apparmor="STATUS" operation="profile_replace" parent=372 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b2cf)
input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (516) killed by TERM signal
usbcore: registered new interface driver ath3k
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 1-1.6: USB disconnect, device number 4
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (658) terminated with status 1
type=1400 audit(1398382870.631:8): apparmor="STATUS" operation="profile_load" parent=669 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=674 comm="apparmor_parser"
type=1400 audit(1398382870.631:9): apparmor="STATUS" operation="profile_load" parent=669 profile="unconfined" name="/usr/sbin/cupsd" pid=674 comm="apparmor_parser"
type=1400 audit(1398382870.631:10): apparmor="STATUS" operation="profile_replace" parent=669 profile="unconfined" name="/usr/sbin/cupsd" pid=674 comm="apparmor_parser"
type=1400 audit(1398382870.695:11): apparmor="STATUS" operation="profile_replace" parent=715 profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
usb 1-1.6: new full-speed USB device number 5 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
atl1c 0000:0a:00.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 8c:04:ff:be:03:e1
wlan0: send auth to 8c:04:ff:be:03:e1 (try 1/3)
wlan0: authenticated
wlan0: associate with 8c:04:ff:be:03:e1 (try 1/3)
wlan0: RX AssocResp from 8c:04:ff:be:03:e1 (capab=0x411 status=0 aid=8)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: udev-fallback-graphics main process (1145) terminated with status 1
init: plymouth-splash main process (1163) terminated with status 1
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.VGA_.LCD_.NINT] (Node ffff880149263870), AE_AML_INFINITE_LOOP (20130517/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.VGA_.LCD_._BCM] (Node ffff8801492638e8), AE_AML_INFINITE_LOOP (20130517/psparse-536)
ACPI Error: Evaluating _BCM failed (20130517/video-367)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input10
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)