dmesg - tr03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.3-betaworks (root@betaworks) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #4 SMP PREEMPT Tue May 21 07:51:17 BST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.3-betaworks root=/dev/disk/by-id/ata-WDC_WD20EARS-00MVWB0_WD-WCAZA4568243-part1 resume=/dev/disk/by-id/ata-ST3500641AS_3PM23XCG-part5 splash=silent quiet showopts vga=0x346
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba5d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba5d2000-0x00000000baa05fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baa06000-0x00000000baa15fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000baa16000-0x00000000bb816fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb817000-0x00000000bca33fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd081fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd082000-0x00000000bd7f2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd7f3000-0x00000000bd7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2002 02/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BD800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 base 0000BE000000 mask FFFFFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000440000000 aka 17408M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01d77000, 0x01d77fff] PGTABLE
[ 0.000000] BRK [0x01d78000, 0x01d78fff] PGTABLE
[ 0.000000] BRK [0x01d79000, 0x01d79fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[ 0.000000] [mem 0x43fe00000-0x43fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[ 0.000000] [mem 0x43c000000-0x43fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xba5d1fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba5d1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbca34000-0xbca34fff]
[ 0.000000] [mem 0xbca34000-0xbca34fff] page 4k
[ 0.000000] BRK [0x01d7a000, 0x01d7afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbcc3b000-0xbd081fff]
[ 0.000000] [mem 0xbcc3b000-0xbcdfffff] page 4k
[ 0.000000] [mem 0xbce00000-0xbcffffff] page 2M
[ 0.000000] [mem 0xbd000000-0xbd081fff] page 4k
[ 0.000000] BRK [0x01d7b000, 0x01d7bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbd7f3000-0xbd7fffff]
[ 0.000000] [mem 0xbd7f3000-0xbd7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x361c4000-0x370d9fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000baa0e070 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baa15278 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
[ 0.000000] ACPI: DSDT 00000000baa0e158 07119 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bb811f80 00040
[ 0.000000] ACPI: APIC 00000000baa15388 0007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000baa15408 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000baa15450 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000baa15490 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: BGRT 00000000baa15520 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fffffff]
[ 0.000000] NODE_DATA [mem 0x43ffe6000-0x43fff9fff]
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042f600000-ffff88043d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xba5d1fff]
[ 0.000000] node 0: [mem 0xbca34000-0xbca34fff]
[ 0.000000] node 0: [mem 0xbcc3b000-0xbd081fff]
[ 0.000000] node 0: [mem 0xbd7f3000-0xbd7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x43fffffff]
[ 0.000000] On node 0 totalpages: 4172227
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10396 pages used for memmap
[ 0.000000] DMA32 zone: 760359 pages, LIFO batch:31
[ 0.000000] Normal zone: 46592 pages used for memmap
[ 0.000000] Normal zone: 3407871 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ba5d2000 - 00000000baa06000
[ 0.000000] PM: Registered nosave memory: 00000000baa06000 - 00000000baa16000
[ 0.000000] PM: Registered nosave memory: 00000000baa16000 - 00000000bb817000
[ 0.000000] PM: Registered nosave memory: 00000000bb817000 - 00000000bca34000
[ 0.000000] PM: Registered nosave memory: 00000000bca35000 - 00000000bcc3b000
[ 0.000000] PM: Registered nosave memory: 00000000bd082000 - 00000000bd7f3000
[ 0.000000] PM: Registered nosave memory: 00000000bd800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
[ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
[ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] e820: [mem 0xbd800000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043fc00000 s80960 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4115162
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.3-betaworks root=/dev/disk/by-id/ata-WDC_WD20EARS-00MVWB0_WD-WCAZA4568243-part1 resume=/dev/disk/by-id/ata-ST3500641AS_3PM23XCG-part5 splash=silent quiet showopts vga=0x346
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
[ 0.000000] Memory: 16297816k/17825792k available (5707k kernel code, 1136884k absent, 391092k reserved, 5261k data, 1240k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 3210.713 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.42 BogoMIPS (lpj=3210713)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000043] AppArmor: AppArmor initialized
[ 0.000900] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004844] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006619] Mount-cache hash table entries: 256
[ 0.006767] Initializing cgroup subsys cpuacct
[ 0.006769] Initializing cgroup subsys devices
[ 0.006770] Initializing cgroup subsys freezer
[ 0.006771] Initializing cgroup subsys net_cls
[ 0.006773] Initializing cgroup subsys blkio
[ 0.006793] tseg: 00bd800000
[ 0.006795] CPU: Physical Processor ID: 0
[ 0.006796] CPU: Processor Core ID: 0
[ 0.006798] mce: CPU supports 6 MCE banks
[ 0.006803] LVT offset 0 assigned for vector 0xf9
[ 0.006808] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.006808] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.006808] tlb_flushall_shift: 4
[ 0.006860] Freeing SMP alternatives: 20k freed
[ 0.007270] ACPI: Core revision 20130117
[ 0.010142] ACPI: All ACPI Tables successfully acquired
[ 0.265275] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.275280] smpboot: CPU0: AMD Phenom(tm) II X4 840 Processor (fam: 10, model: 05, stepping: 03)
[ 0.377121] Performance Events: AMD PMU driver.
[ 0.377125] ... version: 0
[ 0.377126] ... bit width: 48
[ 0.377126] ... generic registers: 4
[ 0.377127] ... value mask: 0000ffffffffffff
[ 0.377128] ... max period: 00007fffffffffff
[ 0.377129] ... fixed-purpose events: 0
[ 0.377130] ... event mask: 000000000000000f
[ 0.387202] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.389245] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.432400] Brought up 4 CPUs
[ 0.432404] smpboot: Total of 4 processors activated (25685.70 BogoMIPS)
[ 0.433112] devtmpfs: initialized
[ 0.435251] PM: Registering ACPI NVS region [mem 0xbaa16000-0xbb816fff] (14684160 bytes)
[ 0.435540] PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
[ 0.435723] regulator-dummy: no parameters
[ 0.435751] RTC time: 17:24:17, date: 04/21/14
[ 0.435811] NET: Registered protocol family 16
[ 0.435916] node 0 link 0: io port [a000, ffff]
[ 0.435919] TOM: 00000000c0000000 aka 3072M
[ 0.435920] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.435922] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
[ 0.435926] TOM2: 0000000440000000 aka 17408M
[ 0.435928] bus: [bus 00-1f] on node 0 link 0
[ 0.435929] bus: 00 [io 0x0000-0xffff]
[ 0.435930] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.435931] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.435932] bus: 00 [mem 0x440000000-0xfcffffffff]
[ 0.435983] ACPI: bus type PCI registered
[ 0.436029] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.436031] PCI: not using MMCONFIG
[ 0.436032] PCI: Using configuration type 1 for base access
[ 0.436033] PCI: Using configuration type 1 for extended access
[ 0.436388] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.436389] mtrr: probably your BIOS does not setup all CPUs.
[ 0.436390] mtrr: corrected configuration.
[ 0.437126] bio: create slab at 0
[ 0.437207] ACPI: Added _OSI(Module Device)
[ 0.437208] ACPI: Added _OSI(Processor Device)
[ 0.437209] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.437211] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.437843] ACPI: EC: Look up EC in DSDT
[ 0.438510] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.443621] ACPI: Interpreter enabled
[ 0.443630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.443633] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.443643] ACPI: (supports S0 S3 S4 S5)
[ 0.443645] ACPI: Using IOAPIC for interrupt routing
[ 0.443841] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.443884] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.454892] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.475256] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.475558] PCI host bridge to bus 0000:00
[ 0.475561] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.475563] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.475564] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.475566] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.475567] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.475569] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.475571] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.475572] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.475584] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.475702] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.475736] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.475771] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.475799] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.475832] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.475867] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.475894] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[ 0.475927] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.475963] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.475989] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[ 0.476022] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.476060] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.476085] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[ 0.476119] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.476159] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.476185] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.476218] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.476257] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.476283] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.476316] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.476356] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.476386] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
[ 0.476423] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 0.476464] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.476494] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[ 0.476528] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.476572] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.476606] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.476621] pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
[ 0.476629] pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
[ 0.476636] pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
[ 0.476644] pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
[ 0.476651] pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
[ 0.476659] pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff]
[ 0.476739] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.476750] pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
[ 0.476810] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.476842] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.476857] pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
[ 0.476954] pci 0000:00:12.2: supports D1 D2
[ 0.476956] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.476980] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.477010] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.477020] pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff]
[ 0.477108] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.477141] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.477156] pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff]
[ 0.477221] pci 0000:00:13.2: supports D1 D2
[ 0.477222] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.477248] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.477278] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.477362] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.477379] pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.477431] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.477449] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.477475] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.477559] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.477601] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.477627] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.477638] pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff]
[ 0.477703] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.477731] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.477742] pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff]
[ 0.477831] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.477863] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.477878] pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff]
[ 0.477943] pci 0000:00:16.2: supports D1 D2
[ 0.477944] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.477971] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.478001] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.478079] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.478152] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.478223] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.478298] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.478420] pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
[ 0.478431] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.478440] pci 0000:01:00.0: reg 18: [mem 0xfea00000-0xfea3ffff 64bit]
[ 0.478446] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.478457] pci 0000:01:00.0: reg 30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.478489] pci 0000:01:00.0: supports D1 D2
[ 0.478491] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.478539] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.478550] pci 0000:01:00.1: reg 10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.478605] pci 0000:01:00.1: supports D1 D2
[ 0.480173] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.480180] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.480183] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.480187] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.480248] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[ 0.480260] pci 0000:02:00.0: reg 10: [io 0xd050-0xd057]
[ 0.480268] pci 0000:02:00.0: reg 14: [io 0xd040-0xd043]
[ 0.480275] pci 0000:02:00.0: reg 18: [io 0xd030-0xd037]
[ 0.480283] pci 0000:02:00.0: reg 1c: [io 0xd020-0xd023]
[ 0.480291] pci 0000:02:00.0: reg 20: [io 0xd000-0xd01f]
[ 0.480298] pci 0000:02:00.0: reg 24: [mem 0xfe900000-0xfe9001ff]
[ 0.482173] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.482179] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.482181] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.482259] pci 0000:03:00.0: [8086:150c] type 00 class 0x020000
[ 0.482280] pci 0000:03:00.0: reg 10: [mem 0xfe800000-0xfe81ffff]
[ 0.482306] pci 0000:03:00.0: reg 18: [io 0xc000-0xc01f]
[ 0.482320] pci 0000:03:00.0: reg 1c: [mem 0xfe820000-0xfe823fff]
[ 0.482436] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.484177] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.484184] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 0.484187] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.484290] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.484309] pci 0000:04:00.0: reg 10: [mem 0xfe700000-0xfe707fff 64bit]
[ 0.484408] pci 0000:04:00.0: PME# supported from D3cold
[ 0.486175] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 0.486182] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.486250] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.486268] pci 0000:05:00.0: reg 10: [mem 0xfe600000-0xfe607fff 64bit]
[ 0.486358] pci 0000:05:00.0: PME# supported from D3cold
[ 0.488175] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.488183] pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.488251] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.488270] pci 0000:06:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
[ 0.488359] pci 0000:06:00.0: PME# supported from D3cold
[ 0.490176] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.490184] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.490252] pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
[ 0.490264] pci 0000:07:00.0: reg 10: [io 0xb050-0xb057]
[ 0.490271] pci 0000:07:00.0: reg 14: [io 0xb040-0xb043]
[ 0.490279] pci 0000:07:00.0: reg 18: [io 0xb030-0xb037]
[ 0.490286] pci 0000:07:00.0: reg 1c: [io 0xb020-0xb023]
[ 0.490294] pci 0000:07:00.0: reg 20: [io 0xb000-0xb01f]
[ 0.490301] pci 0000:07:00.0: reg 24: [mem 0xfe400000-0xfe4001ff]
[ 0.492175] pci 0000:00:0a.0: PCI bridge to [bus 07]
[ 0.492182] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.492184] pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.492249] pci 0000:08:00.0: [1002:683f] type 00 class 0x030000
[ 0.492262] pci 0000:08:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.492270] pci 0000:08:00.0: reg 18: [mem 0xfe300000-0xfe33ffff 64bit]
[ 0.492276] pci 0000:08:00.0: reg 20: [io 0xa000-0xa0ff]
[ 0.492287] pci 0000:08:00.0: reg 30: [mem 0xfe340000-0xfe35ffff pref]
[ 0.492321] pci 0000:08:00.0: supports D1 D2
[ 0.492323] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 0.492381] pci 0000:08:00.1: [1002:aab0] type 00 class 0x040300
[ 0.492392] pci 0000:08:00.1: reg 10: [mem 0xfe360000-0xfe363fff 64bit]
[ 0.492447] pci 0000:08:00.1: supports D1 D2
[ 0.494176] pci 0000:00:0b.0: PCI bridge to [bus 08]
[ 0.494182] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
[ 0.494184] pci 0000:00:0b.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.494188] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.494239] pci 0000:00:0d.0: PCI bridge to [bus 09]
[ 0.494307] pci 0000:00:14.4: PCI bridge to [bus 0a] (subtractive decode)
[ 0.494314] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.494316] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.494317] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.494319] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.494320] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.494322] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.494323] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.494352] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.494353] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.494687] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.494763] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.494839] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.494914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[ 0.494975] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.495023] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.495070] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.495118] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.495236] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.495241] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.495270] Found 1 acpi root devices
[ 0.495291] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.495425] ACPI: No dock devices found.
[ 0.495493] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.495498] vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=none,locks=none
[ 0.495499] vgaarb: loaded
[ 0.495500] vgaarb: bridge control possible 0000:08:00.0
[ 0.495501] vgaarb: bridge control possible 0000:01:00.0
[ 0.495603] SCSI subsystem initialized
[ 0.495605] ACPI: bus type ATA registered
[ 0.495700] libata version 3.00 loaded.
[ 0.495720] ACPI: bus type USB registered
[ 0.495737] usbcore: registered new interface driver usbfs
[ 0.495745] usbcore: registered new interface driver hub
[ 0.495829] usbcore: registered new device driver usb
[ 0.495954] PCI: Using ACPI for IRQ routing
[ 0.502637] PCI: pci_cache_line_size set to 64 bytes
[ 0.502742] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.502743] e820: reserve RAM buffer [mem 0xba5d2000-0xbbffffff]
[ 0.502744] e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
[ 0.502746] e820: reserve RAM buffer [mem 0xbd082000-0xbfffffff]
[ 0.502747] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[ 0.502831] NetLabel: Initializing
[ 0.502832] NetLabel: domain hash size = 128
[ 0.502833] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.502841] NetLabel: unlabeled traffic allowed by default
[ 0.502864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.502866] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.504897] Switching to clocksource hpet
[ 0.506557] AppArmor: AppArmor Filesystem Enabled
[ 0.506584] pnp: PnP ACPI init
[ 0.506599] ACPI: bus type PNP registered
[ 0.506732] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.506735] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.507058] system 00:01: [io 0x040b] has been reserved
[ 0.507060] system 00:01: [io 0x04d6] has been reserved
[ 0.507062] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.507064] system 00:01: [io 0x0c14] has been reserved
[ 0.507065] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.507067] system 00:01: [io 0x0c52] has been reserved
[ 0.507069] system 00:01: [io 0x0c6c] has been reserved
[ 0.507070] system 00:01: [io 0x0c6f] has been reserved
[ 0.507072] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.507074] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.507075] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.507077] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.507079] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.507080] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.507082] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.507084] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.507085] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.507088] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.507091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.507093] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.507096] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.507098] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.507100] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.507101] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.507103] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.507105] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507254] system 00:02: [io 0x0290-0x02af] has been reserved
[ 0.507256] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507269] pnp 00:03: [dma 4]
[ 0.507284] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.507313] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.507333] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.507392] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.507394] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507418] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.507455] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507619] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507739] system 00:0a: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.507741] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507920] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.507926] pnp: PnP ACPI: found 12 devices
[ 0.507927] ACPI: bus type PNP unregistered
[ 0.514238] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.514242] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.514245] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.514248] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.514251] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.514253] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.514255] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.514259] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.514261] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 0.514264] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.514268] pci 0000:00:06.0: PCI bridge to [bus 04]
[ 0.514270] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.514274] pci 0000:00:07.0: PCI bridge to [bus 05]
[ 0.514277] pci 0000:00:07.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.514281] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.514283] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.514287] pci 0000:00:0a.0: PCI bridge to [bus 07]
[ 0.514289] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
[ 0.514292] pci 0000:00:0a.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.514296] pci 0000:00:0b.0: PCI bridge to [bus 08]
[ 0.514297] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
[ 0.514300] pci 0000:00:0b.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.514302] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.514305] pci 0000:00:0d.0: PCI bridge to [bus 09]
[ 0.514310] pci 0000:00:14.4: PCI bridge to [bus 0a]
[ 0.514652] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.514654] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.514655] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.514657] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.514658] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.514660] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.514661] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.514663] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.514664] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.514666] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.514667] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.514669] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.514671] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.514672] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.514674] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.514675] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.514677] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.514679] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
[ 0.514680] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.514682] pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
[ 0.514683] pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.514685] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.514686] pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
[ 0.514688] pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
[ 0.514689] pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
[ 0.514691] pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
[ 0.514692] pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.514694] pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.514695] pci_bus 0000:0a: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.514763] NET: Registered protocol family 2
[ 0.515037] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.515535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.515764] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.515802] TCP: reno registered
[ 0.515820] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.515903] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.516069] NET: Registered protocol family 1
[ 0.774246] pci 0000:01:00.0: Boot video device
[ 0.774410] PCI: CLS 64 bytes, default 64
[ 0.774450] Unpacking initramfs...
[ 0.969489] Freeing initrd memory: 15448k freed
[ 0.973463] PCI-DMA: Disabling AGP.
[ 0.974736] PCI-DMA: aperture base @ b0000000 size 65536 KB
[ 0.974737] PCI-DMA: using GART IOMMU.
[ 0.974739] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.977574] LVT offset 1 assigned for vector 0x400
[ 0.977587] IBS: LVT offset 1 assigned
[ 0.977612] perf: AMD IBS detected (0x0000001f)
[ 0.977779] Scanning for low memory corruption every 60 seconds
[ 0.977982] audit: initializing netlink socket (disabled)
[ 0.977992] type=2000 audit(1398101056.619:1): initialized
[ 0.991065] bounce pool size: 64 pages
[ 0.991071] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.991312] VFS: Disk quotas dquot_6.5.2
[ 0.991351] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.991477] msgmni has been set to 31990
[ 0.991738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.991766] io scheduler noop registered
[ 0.991767] io scheduler deadline registered
[ 0.991779] io scheduler cfq registered (default)
[ 0.992136] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[ 0.992137] vesafb: scrolling: redraw
[ 0.992138] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.992538] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 9024k, total 9024k
[ 1.016747] Console: switching to colour frame buffer device 240x75
[ 1.040816] fb0: VESA VGA frame buffer device
[ 1.041539] Non-volatile memory driver v1.3
[ 1.041540] Linux agpgart interface v0.103
[ 1.041644] ahci 0000:00:11.0: version 3.0
[ 1.041784] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0x35 impl SATA mode
[ 1.041787] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.042362] scsi0 : ahci
[ 1.042503] scsi1 : ahci
[ 1.042636] scsi2 : ahci
[ 1.042777] scsi3 : ahci
[ 1.042921] scsi4 : ahci
[ 1.043074] scsi5 : ahci
[ 1.043127] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.043128] ata2: DUMMY
[ 1.043130] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 1.043131] ata4: DUMMY
[ 1.043133] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
[ 1.043135] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
[ 1.043352] ahci 0000:02:00.0: irq 72 for MSI/MSI-X
[ 1.043384] ahci: SSS flag set, parallel bus scan disabled
[ 1.043417] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.043420] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 1.043729] scsi6 : ahci
[ 1.043870] scsi7 : ahci
[ 1.043925] ata7: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 72
[ 1.043927] ata8: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 72
[ 1.044103] ahci 0000:07:00.0: irq 73 for MSI/MSI-X
[ 1.044130] ahci: SSS flag set, parallel bus scan disabled
[ 1.044153] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.044156] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 1.044472] scsi8 : ahci
[ 1.044585] scsi9 : ahci
[ 1.044623] ata9: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400100 irq 73
[ 1.044625] ata10: SATA max UDMA/133 abar m512@0xfe400000 port 0xfe400180 irq 73
[ 1.044754] libphy: Fixed MDIO Bus: probed
[ 1.044758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.044759] ehci-pci: EHCI PCI platform driver
[ 1.044863] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.044871] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.044887] QUIRK: Enable AMD PLL fix
[ 1.044888] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.044898] ehci-pci 0000:00:12.2: debug port 1
[ 1.044932] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.050095] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.050122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.050124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050125] usb usb1: Product: EHCI Host Controller
[ 1.050127] usb usb1: Manufacturer: Linux 3.9.3-betaworks ehci_hcd
[ 1.050128] usb usb1: SerialNumber: 0000:00:12.2
[ 1.050251] hub 1-0:1.0: USB hub found
[ 1.050254] hub 1-0:1.0: 5 ports detected
[ 1.050461] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.050466] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.050471] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.050481] ehci-pci 0000:00:13.2: debug port 1
[ 1.050513] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[ 1.056095] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.056123] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.056124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.056126] usb usb2: Product: EHCI Host Controller
[ 1.056127] usb usb2: Manufacturer: Linux 3.9.3-betaworks ehci_hcd
[ 1.056128] usb usb2: SerialNumber: 0000:00:13.2
[ 1.056251] hub 2-0:1.0: USB hub found
[ 1.056254] hub 2-0:1.0: 5 ports detected
[ 1.056458] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.056462] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.056466] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.056476] ehci-pci 0000:00:16.2: debug port 1
[ 1.056509] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[ 1.062097] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.062119] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.062120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.062122] usb usb3: Product: EHCI Host Controller
[ 1.062123] usb usb3: Manufacturer: Linux 3.9.3-betaworks ehci_hcd
[ 1.062124] usb usb3: SerialNumber: 0000:00:16.2
[ 1.062241] hub 3-0:1.0: USB hub found
[ 1.062244] hub 3-0:1.0: 4 ports detected
[ 1.062362] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.062481] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.062489] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.062517] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.117141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.117144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.117146] usb usb4: Product: OHCI Host Controller
[ 1.117147] usb usb4: Manufacturer: Linux 3.9.3-betaworks ohci_hcd
[ 1.117148] usb usb4: SerialNumber: 0000:00:12.0
[ 1.117270] hub 4-0:1.0: USB hub found
[ 1.117277] hub 4-0:1.0: 5 ports detected
[ 1.117478] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.117482] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.117506] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000
[ 1.172153] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.172156] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.172157] usb usb5: Product: OHCI Host Controller
[ 1.172159] usb usb5: Manufacturer: Linux 3.9.3-betaworks ohci_hcd
[ 1.172160] usb usb5: SerialNumber: 0000:00:13.0
[ 1.172310] hub 5-0:1.0: USB hub found
[ 1.172315] hub 5-0:1.0: 5 ports detected
[ 1.172511] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.172515] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.172531] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.227165] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.227168] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.227170] usb usb6: Product: OHCI Host Controller
[ 1.227171] usb usb6: Manufacturer: Linux 3.9.3-betaworks ohci_hcd
[ 1.227172] usb usb6: SerialNumber: 0000:00:14.5
[ 1.227290] hub 6-0:1.0: USB hub found
[ 1.227295] hub 6-0:1.0: 2 ports detected
[ 1.227497] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.227501] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.227525] ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000
[ 1.282185] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.282188] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.282190] usb usb7: Product: OHCI Host Controller
[ 1.282191] usb usb7: Manufacturer: Linux 3.9.3-betaworks ohci_hcd
[ 1.282192] usb usb7: SerialNumber: 0000:00:16.0
[ 1.282297] hub 7-0:1.0: USB hub found
[ 1.282302] hub 7-0:1.0: 4 ports detected
[ 1.282414] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.282464] Initializing USB Mass Storage driver...
[ 1.282492] usbcore: registered new interface driver usb-storage
[ 1.282493] USB Mass Storage support registered.
[ 1.282498] usbcore: registered new interface driver ums-alauda
[ 1.282503] usbcore: registered new interface driver ums-cypress
[ 1.282510] usbcore: registered new interface driver ums-datafab
[ 1.282517] usbcore: registered new interface driver ums-freecom
[ 1.282522] usbcore: registered new interface driver ums-isd200
[ 1.282527] usbcore: registered new interface driver ums-jumpshot
[ 1.282532] usbcore: registered new interface driver ums-karma
[ 1.282537] usbcore: registered new interface driver ums-onetouch
[ 1.282542] usbcore: registered new interface driver ums-sddr09
[ 1.282548] usbcore: registered new interface driver ums-sddr55
[ 1.282553] usbcore: registered new interface driver ums-usbat
[ 1.282581] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.282947] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.282952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.283084] mousedev: PS/2 mouse device common for all mice
[ 1.283215] rtc_cmos 00:04: RTC can wake from S4
[ 1.283344] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.283367] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.283375] cpuidle: using governor ladder
[ 1.283376] cpuidle: using governor menu
[ 1.283377] EFI Variables Facility v0.08 2004-May-17
[ 1.283390] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.283532] usbcore: registered new interface driver usbhid
[ 1.283532] usbhid: USB HID core driver
[ 1.283622] TCP: cubic registered
[ 1.283663] NET: Registered protocol family 10
[ 1.283798] Key type dns_resolver registered
[ 1.283801] Key type ceph registered
[ 1.283804] libceph: loaded (mon/osd proto 15/24)
[ 1.284146] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3500641AS_3PM23XCG-part5
[ 1.349177] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.349181] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.352198] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.475270] usb 1-1: New USB device found, idVendor=05ac, idProduct=1006
[ 1.475273] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.475275] usb 1-1: Product: Keyboard Hub
[ 1.475276] usb 1-1: Manufacturer: Apple, Inc.
[ 1.475278] usb 1-1: SerialNumber: 000000000000
[ 1.475552] hub 1-1:1.0: USB hub found
[ 1.475643] hub 1-1:1.0: 3 ports detected
[ 1.503230] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.503257] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.503282] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.503307] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.507688] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 1.507692] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.509788] ata5.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.509792] ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.510372] ata6.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 1.510375] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.510810] ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 1.510813] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.512685] ata3.00: configured for UDMA/133
[ 1.516335] ata5.00: configured for UDMA/133
[ 1.517374] ata6.00: configured for UDMA/133
[ 1.518810] ata1.00: configured for UDMA/133
[ 1.519010] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 1.519287] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.519289] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.519397] sd 0:0:0:0: [sda] Write Protect is off
[ 1.519398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.519413] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 1.519437] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.519591] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.519676] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 1.519687] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.519689] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.519723] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.519775] sd 4:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.519798] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.519799] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.519810] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.519937] scsi 5:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 1.520037] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.520039] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 1.520061] sd 5:0:0:0: [sdd] Write Protect is off
[ 1.520063] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.520076] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.532861] sdb: sdb1 sdb2
[ 1.533557] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.539724] sdc: sdc1 sdc2
[ 1.539943] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.550181] sda: sda1 sda2 sda3 sda4
[ 1.550930] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.578220] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.709789] usb 1-2: New USB device found, idVendor=0ac8, idProduct=3450
[ 1.709792] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.709794] usb 1-2: Product: Vimicro USB Camera (Altair)
[ 1.709795] usb 1-2: Manufacturer: Vimicro
[ 1.824285] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.936927] sdd: sdd1
[ 1.937122] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 1.979335] tsc: Refined TSC clocksource calibration: 3210.772 MHz
[ 1.979340] Switching to clocksource tsc
[ 2.064326] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 2.129351] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.129410] PM: Hibernation image not present or could not be loaded.
[ 2.129435] registered taskstats version 1
[ 2.129919] Magic number: 10:742:441
[ 2.130054] rtc_cmos 00:04: setting system clock to 2014-04-21 17:24:18 UTC (1398101058)
[ 2.130964] Freeing unused kernel memory: 1240k freed
[ 2.131220] Write protecting the kernel read-only data: 10240k
[ 2.132165] Freeing unused kernel memory: 428k freed
[ 2.135023] Freeing unused kernel memory: 1476k freed
[ 2.179289] usb 2-3: New USB device found, idVendor=eb1a, idProduct=2860
[ 2.179293] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.195268] udev[110]: starting version 166
[ 2.254445] usb 1-1.2: new low-speed USB device number 5 using ehci-pci
[ 2.348592] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=0221
[ 2.348596] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.348598] usb 1-1.2: Product: Apple Keyboard
[ 2.348599] usb 1-1.2: Manufacturer: Apple, Inc
[ 2.352600] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[ 2.352715] apple 0003:05AC:0221.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:12.2-1.2/input0
[ 2.355783] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
[ 2.355894] apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:12.2-1.2/input1
[ 2.428465] usb 1-1.3: new full-speed USB device number 6 using ehci-pci
[ 2.518993] usb 1-1.3: New USB device found, idVendor=06a3, idProduct=0cd3
[ 2.518997] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.518999] usb 1-1.3: Product: Cyborg R.A.T.3 Mouse
[ 2.519001] usb 1-1.3: Manufacturer: Saitek
[ 2.520487] input: Saitek Cyborg R.A.T.3 Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[ 2.520616] hid-generic 0003:06A3:0CD3.0003: input,hidraw2: USB HID v1.00 Mouse [Saitek Cyborg R.A.T.3 Mouse] on usb-0000:00:12.2-1.3/input0
[ 2.747490] usb 4-5: new full-speed USB device number 2 using ohci_hcd
[ 2.903575] usb 4-5: New USB device found, idVendor=050d, idProduct=0013
[ 2.903579] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.903581] usb 4-5: Product: Belkin Bluetooth Device
[ 2.903583] usb 4-5: Manufacturer: Broadcom Corp
[ 2.952362] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.126243] EXT4-fs (sdb1): re-mounted. Opts: acl,user_xattr
[ 6.537392] udev[469]: starting version 166
[ 6.691233] microcode: CPU0: patch_level=0x010000c8
[ 6.717303] microcode: CPU1: patch_level=0x010000c8
[ 6.717326] microcode: CPU2: patch_level=0x010000c8
[ 6.717336] microcode: CPU3: patch_level=0x010000c8
[ 6.717409] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 6.822056] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.822126] ACPI: Power Button [PWRB]
[ 6.822169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.822192] ACPI: Power Button [PWRF]
[ 6.941826] MCE: In-kernel MCE decoding enabled.
[ 6.992663] pps_core: LinuxPPS API ver. 1 registered
[ 6.992666] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 6.997073] wmi: Mapper loaded
[ 7.130411] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 7.130431] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[ 7.182838] EDAC MC: Ver: 3.0.0
[ 7.184572] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
[ 7.184579] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
[ 7.184583] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
[ 7.184587] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
[ 7.184590] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
[ 7.184666] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.184668] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.184670] usb usb8: Product: xHCI Host Controller
[ 7.184671] usb usb8: Manufacturer: Linux 3.9.3-betaworks xhci_hcd
[ 7.184672] usb usb8: SerialNumber: 0000:04:00.0
[ 7.184774] xHCI xhci_add_endpoint called for root hub
[ 7.184775] xHCI xhci_check_bandwidth called for root hub
[ 7.184799] hub 8-0:1.0: USB hub found
[ 7.184805] hub 8-0:1.0: 2 ports detected
[ 7.184886] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 7.184889] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 7.184911] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.184912] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.184914] usb usb9: Product: xHCI Host Controller
[ 7.184915] usb usb9: Manufacturer: Linux 3.9.3-betaworks xhci_hcd
[ 7.184916] usb usb9: SerialNumber: 0000:04:00.0
[ 7.184998] xHCI xhci_add_endpoint called for root hub
[ 7.184999] xHCI xhci_check_bandwidth called for root hub
[ 7.185016] hub 9-0:1.0: USB hub found
[ 7.185020] hub 9-0:1.0: 2 ports detected
[ 7.189620] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 7.189630] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 7.199284] AMD64 EDAC driver v3.4.0
[ 7.243760] xhci_hcd 0000:05:00.0: irq 79 for MSI/MSI-X
[ 7.243765] xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
[ 7.243769] xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
[ 7.243773] xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
[ 7.243776] xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
[ 7.243851] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.243852] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.243854] usb usb10: Product: xHCI Host Controller
[ 7.243855] usb usb10: Manufacturer: Linux 3.9.3-betaworks xhci_hcd
[ 7.243856] usb usb10: SerialNumber: 0000:05:00.0
[ 7.243884] EDAC amd64: DRAM ECC disabled.
[ 7.243904] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 7.243904] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 7.243904] (Note that use of the override may cause unknown side effects.)
[ 7.243980] xHCI xhci_add_endpoint called for root hub
[ 7.243982] xHCI xhci_check_bandwidth called for root hub
[ 7.244003] hub 10-0:1.0: USB hub found
[ 7.244008] hub 10-0:1.0: 2 ports detected
[ 7.244090] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 7.244093] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
[ 7.244121] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.244123] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.244124] usb usb11: Product: xHCI Host Controller
[ 7.244126] usb usb11: Manufacturer: Linux 3.9.3-betaworks xhci_hcd
[ 7.244127] usb usb11: SerialNumber: 0000:05:00.0
[ 7.244181] xHCI xhci_add_endpoint called for root hub
[ 7.244182] xHCI xhci_check_bandwidth called for root hub
[ 7.244199] hub 11-0:1.0: USB hub found
[ 7.244205] hub 11-0:1.0: 2 ports detected
[ 7.251644] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 7.251653] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 12
[ 7.283347] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.283387] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.283422] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 7.283526] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 7.305786] xhci_hcd 0000:06:00.0: irq 84 for MSI/MSI-X
[ 7.305790] xhci_hcd 0000:06:00.0: irq 85 for MSI/MSI-X
[ 7.305794] xhci_hcd 0000:06:00.0: irq 86 for MSI/MSI-X
[ 7.305798] xhci_hcd 0000:06:00.0: irq 87 for MSI/MSI-X
[ 7.305802] xhci_hcd 0000:06:00.0: irq 88 for MSI/MSI-X
[ 7.305876] usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.305878] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.305879] usb usb12: Product: xHCI Host Controller
[ 7.305881] usb usb12: Manufacturer: Linux 3.9.3-betaworks xhci_hcd
[ 7.305882] usb usb12: SerialNumber: 0000:06:00.0
[ 7.305990] xHCI xhci_add_endpoint called for root hub
[ 7.305991] xHCI xhci_check_bandwidth called for root hub
[ 7.306012] hub 12-0:1.0: USB hub found
[ 7.306017] hub 12-0:1.0: 2 ports detected
[ 7.306095] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 7.306097] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 13
[ 7.306120] usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.306122] usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.306123] usb usb13: Product: xHCI Host Controller
[ 7.306125] usb usb13: Manufacturer: Linux 3.9.3-betaworks xhci_hcd
[ 7.306126] usb usb13: SerialNumber: 0000:06:00.0
[ 7.306198] xHCI xhci_add_endpoint called for root hub
[ 7.306199] xHCI xhci_check_bandwidth called for root hub
[ 7.306215] hub 13-0:1.0: USB hub found
[ 7.306220] hub 13-0:1.0: 2 ports detected
[ 7.334152] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 1 (20130117/utaddress-251)
[ 7.334161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.460078] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.575350] PTP clock support registered
[ 7.596606] usb 10-2: new high-speed USB device number 2 using xhci_hcd
[ 7.642755] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[ 7.642760] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.643560] hub 10-2:1.0: USB hub found
[ 7.643626] hub 10-2:1.0: 2 ports detected
[ 7.916715] usb 10-2.1: new high-speed USB device number 3 using xhci_hcd
[ 7.962832] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[ 7.962836] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.963639] hub 10-2.1:1.0: USB hub found
[ 7.963677] hub 10-2.1:1.0: 4 ports detected
[ 7.990344] media: Linux media interface: v0.10
[ 8.018617] Linux video capture interface: v2.00
[ 8.237780] usb 10-2.1.1: new high-speed USB device number 4 using xhci_hcd
[ 8.357794] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[ 8.357798] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.357800] usb 10-2.1.1: Product: Flash Card Reader
[ 8.357801] usb 10-2.1.1: Manufacturer: Generic
[ 8.357802] usb 10-2.1.1: SerialNumber: 26020128B005
[ 8.358790] scsi10 : usb-storage 10-2.1.1:1.0
[ 8.515439] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
[ 8.515442] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 8.515478] e1000e 0000:03:00.0: Disabling ASPM L0s
[ 8.515647] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 8.515697] e1000e 0000:03:00.0: irq 89 for MSI/MSI-X
[ 8.617255] e1000e 0000:03:00.0 eth0: registered PHC clock
[ 8.617260] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:3f:49:6d:09:8b
[ 8.617261] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 8.617341] e1000e 0000:03:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
[ 9.042898] em28xx: New device @ 480 Mbps (eb1a:2860, interface 0, class 0)
[ 9.042925] em28xx: Video interface 0 found: isoc
[ 9.042926] em28xx: DVB interface 0 found: isoc
[ 9.043083] em28xx: chip ID is em2860
[ 9.112712] em2860 #0: board has no eeprom
[ 9.134090] em2860 #0: found i2c device @ 0x4a [saa7113h]
[ 9.167970] em2860 #0: Your board has no unique USB ID.
[ 9.168058] em2860 #0: A hint were successfully done, based on i2c devicelist hash.
[ 9.168208] em2860 #0: This method is not 100% failproof.
[ 9.168291] em2860 #0: If the board were missdetected, please email this log to:
[ 9.168404] em2860 #0: V4L Mailing List
[ 9.168505] em2860 #0: Board detected as EM2860/SAA711X Reference Design
[ 9.231983] em2860 #0: Identified as EM2860/SAA711X Reference Design (card=19)
[ 9.370780] scsi 10:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[ 9.370950] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 9.377828] scsi 10:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[ 9.378013] sd 10:0:0:1: Attached scsi generic sg5 type 0
[ 9.386511] ALSA sound/pci/hda/hda_intel.c:3245 0000:00:14.2: Using LPIB position fix
[ 9.390006] ALSA sound/pci/hda/hda_intel.c:1763 0000:00:14.2: Enable sync_write for stable communication
[ 9.453658] sd 10:0:0:0: [sde] Attached SCSI removable disk
[ 9.461402] sd 10:0:0:1: [sdf] Attached SCSI removable disk
[ 9.510628] saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em2860 #0)
[ 9.543275] ALSA sound/pci/hda/patch_realtek.c:394 SKU: Nid=0x1d sku_cfg=0x4007e629
[ 9.543278] ALSA sound/pci/hda/patch_realtek.c:396 SKU: port_connectivity=0x1
[ 9.543280] ALSA sound/pci/hda/patch_realtek.c:397 SKU: enable_pcbeep=0x0
[ 9.543281] ALSA sound/pci/hda/patch_realtek.c:398 SKU: check_sum=0x00000007
[ 9.543282] ALSA sound/pci/hda/patch_realtek.c:399 SKU: customization=0x000000e6
[ 9.543283] ALSA sound/pci/hda/patch_realtek.c:400 SKU: external_amp=0x5
[ 9.543284] ALSA sound/pci/hda/patch_realtek.c:401 SKU: platform_type=0x0
[ 9.543285] ALSA sound/pci/hda/patch_realtek.c:402 SKU: swap=0x0
[ 9.543286] ALSA sound/pci/hda/patch_realtek.c:403 SKU: override=0x1
[ 9.543703] ALSA sound/pci/hda/hda_auto_parser.c:335 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 9.543705] ALSA sound/pci/hda/hda_auto_parser.c:339 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.543706] ALSA sound/pci/hda/hda_auto_parser.c:343 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.543707] ALSA sound/pci/hda/hda_auto_parser.c:344 mono: mono_out=0x0
[ 9.543708] ALSA sound/pci/hda/hda_auto_parser.c:347 dig-out=0x11/0x1e
[ 9.543709] ALSA sound/pci/hda/hda_auto_parser.c:348 inputs:
[ 9.543711] ALSA sound/pci/hda/hda_auto_parser.c:352 Front Mic=0x19
[ 9.543712] ALSA sound/pci/hda/hda_auto_parser.c:352 Rear Mic=0x18
[ 9.543713] ALSA sound/pci/hda/hda_auto_parser.c:352 Line=0x1a
[ 9.543715] ALSA sound/pci/hda/patch_realtek.c:466 realtek: No valid SSID, checking pincfg 0x4007e629 for NID 0x1d
[ 9.543716] ALSA sound/pci/hda/patch_realtek.c:482 realtek: Enabling init ASM_ID=0xe629 CODEC_ID=10ec0899
[ 9.558444] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 9.558542] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 9.558588] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 9.558634] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 9.558678] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.558743] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.558790] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 9.558854] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 9.559159] ALSA sound/pci/hda/hda_intel.c:3053 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.559161] ALSA sound/pci/hda/hda_intel.c:3245 0000:01:00.1: Using LPIB position fix
[ 9.559162] ALSA sound/pci/hda/hda_intel.c:3365 0000:01:00.1: Force to non-snoop mode
[ 9.559222] snd_hda_intel 0000:01:00.1: irq 90 for MSI/MSI-X
[ 9.561409] ALSA sound/pci/hda/hda_intel.c:1763 0000:01:00.1: Enable sync_write for stable communication
[ 9.709693] uvcvideo: Found UVC 1.00 device Vimicro USB Camera (Altair) (0ac8:3450)
[ 9.711572] input: Vimicro USB Camera (Altair) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input14
[ 9.711681] usbcore: registered new interface driver uvcvideo
[ 9.711682] USB Video Class driver (1.1.1)
[ 9.858601] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 9.858684] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 9.858726] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 9.858768] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
[ 9.858807] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
[ 9.858875] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
[ 9.859296] ALSA sound/pci/hda/hda_intel.c:3053 0000:08:00.1: Handle VGA-switcheroo audio client
[ 9.859299] ALSA sound/pci/hda/hda_intel.c:3245 0000:08:00.1: Using LPIB position fix
[ 9.859300] ALSA sound/pci/hda/hda_intel.c:3365 0000:08:00.1: Force to non-snoop mode
[ 9.859356] snd_hda_intel 0000:08:00.1: irq 91 for MSI/MSI-X
[ 9.861469] ALSA sound/pci/hda/hda_intel.c:1763 0000:08:00.1: Enable sync_write for stable communication
[ 9.862917] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card3/input21
[ 9.863012] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card3/input22
[ 9.863078] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card3/input23
[ 9.863129] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card3/input24
[ 9.863177] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card3/input25
[ 9.863244] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card3/input26
[ 9.928788] em2860 #0: Config register raw data: 0x00
[ 9.956046] em2860 #0: v4l2 driver version 0.1.3
[ 10.017878] kvm: Nested Virtualization enabled
[ 10.017882] kvm: Nested Paging enabled
[ 10.258322] em2860 #0: V4L2 video device registered as video1
[ 10.258325] em2860 #0: V4L2 VBI device registered as vbi0
[ 10.258327] em2860 #0: analog set to isoc mode.
[ 10.258329] em2860 #0: dvb set to isoc mode.
[ 10.270283] usbcore: registered new interface driver em28xx
[ 10.347477] Bluetooth: Core ver 2.16
[ 10.347500] NET: Registered protocol family 31
[ 10.347502] Bluetooth: HCI device and connection manager initialized
[ 10.347510] Bluetooth: HCI socket layer initialized
[ 10.347512] Bluetooth: L2CAP socket layer initialized
[ 10.347520] Bluetooth: SCO socket layer initialized
[ 10.472930] usbcore: registered new interface driver btusb
[ 10.673952] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.673957] Disabling lock debugging due to kernel taint
[ 10.686015] [fglrx] Maximum main memory to use for locked dma buffers: 15624 MBytes.
[ 10.686282] [fglrx] vendor: 1002 device: 683f count: 1
[ 10.686308] [fglrx] vendor: 1002 device: 6811 count: 2
[ 10.686770] [fglrx] ioport: bar 4, base 0xa000, size: 0x100
[ 10.686777] pci 0000:08:00.0: enabling device (0000 -> 0003)
[ 10.686875] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 10.687110] [fglrx] Kernel PAT support is enabled
[ 10.687131] [fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 2 minors
[ 10.801031] Adding 8388604k swap on /dev/sda3. Priority:-1 extents:1 across:8388604k
[ 11.416202] device-mapper: uevent: version 1.0.3
[ 11.416270] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 12.026638] REISERFS (device sdd1): found reiserfs format "3.6" with standard journal
[ 12.026662] REISERFS (device sdd1): using ordered data mode
[ 12.026664] reiserfs: using flush barriers
[ 12.026953] REISERFS (device sdd1): journal params: device sdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.027573] REISERFS (device sdd1): checking transaction log (sdd1)
[ 12.118363] REISERFS (device sdd1): Using tea hash to sort names
[ 12.241979] xor: measuring software checksum speed
[ 12.251655] prefetch64-sse: 12416.000 MB/sec
[ 12.261643] generic_sse: 11980.000 MB/sec
[ 12.261645] xor: using function: prefetch64-sse (12416.000 MB/sec)
[ 12.327691] raid6: sse2x1 4273 MB/s
[ 12.344673] raid6: sse2x2 7148 MB/s
[ 12.361668] raid6: sse2x4 7992 MB/s
[ 12.361669] raid6: using algorithm sse2x4 (7992 MB/s)
[ 12.361670] raid6: using intx1 recovery algorithm
[ 12.551988] Btrfs loaded
[ 12.578829] device fsid a78a7c67-7832-4a5b-8918-7bd6ead1433b devid 1 transid 457583 /dev/sdb2
[ 12.579493] btrfs: setting nodatacow, compression disabled
[ 20.954349] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 20.954856] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
[ 20.954870] REISERFS (device sda2): using ordered data mode
[ 20.954872] reiserfs: using flush barriers
[ 20.955070] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 20.955564] REISERFS (device sda2): checking transaction log (sda2)
[ 21.434488] REISERFS (device sda2): Using tea hash to sort names
[ 21.470144] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 21.470161] REISERFS (device sda1): using ordered data mode
[ 21.470162] reiserfs: using flush barriers
[ 21.470404] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 21.470957] REISERFS (device sda1): checking transaction log (sda1)
[ 21.569605] REISERFS (device sda1): Using tea hash to sort names
[ 21.634997] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[ 21.635018] REISERFS (device sda4): using ordered data mode
[ 21.635019] reiserfs: using flush barriers
[ 21.635279] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 21.635771] REISERFS (device sda4): checking transaction log (sda4)
[ 21.732400] REISERFS (device sda4): Using tea hash to sort names
[ 23.755834] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 26.226511] vgaarb: this pci device is not a vga device
[ 26.226524] vgaarb: this pci device is not a vga device
[ 26.226532] vgaarb: this pci device is not a vga device
[ 26.226540] vgaarb: this pci device is not a vga device
[ 26.226548] vgaarb: this pci device is not a vga device
[ 26.226556] vgaarb: this pci device is not a vga device
[ 26.226563] vgaarb: this pci device is not a vga device
[ 26.226571] vgaarb: this pci device is not a vga device
[ 26.226579] vgaarb: this pci device is not a vga device
[ 26.226588] vgaarb: this pci device is not a vga device
[ 26.226597] vgaarb: this pci device is not a vga device
[ 26.226605] vgaarb: this pci device is not a vga device
[ 26.226614] vgaarb: this pci device is not a vga device
[ 26.226623] vgaarb: this pci device is not a vga device
[ 26.226632] vgaarb: this pci device is not a vga device
[ 26.226641] vgaarb: this pci device is not a vga device
[ 26.226651] vgaarb: this pci device is not a vga device
[ 26.226660] vgaarb: this pci device is not a vga device
[ 26.226670] vgaarb: this pci device is not a vga device
[ 26.226680] vgaarb: this pci device is not a vga device
[ 26.226690] vgaarb: this pci device is not a vga device
[ 26.226700] vgaarb: this pci device is not a vga device
[ 26.226710] vgaarb: this pci device is not a vga device
[ 26.226720] vgaarb: this pci device is not a vga device
[ 26.226730] vgaarb: this pci device is not a vga device
[ 26.226741] vgaarb: this pci device is not a vga device
[ 26.226751] vgaarb: this pci device is not a vga device
[ 26.226770] vgaarb: this pci device is not a vga device
[ 26.226783] vgaarb: this pci device is not a vga device
[ 26.226796] vgaarb: this pci device is not a vga device
[ 26.226809] vgaarb: this pci device is not a vga device
[ 26.226822] vgaarb: this pci device is not a vga device
[ 26.226836] vgaarb: this pci device is not a vga device
[ 26.226850] vgaarb: this pci device is not a vga device
[ 26.226895] vgaarb: device changed decodes: PCI:0000:08:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 26.226917] vgaarb: this pci device is not a vga device
[ 26.229111] e1000e 0000:03:00.0: irq 89 for MSI/MSI-X
[ 26.330339] e1000e 0000:03:00.0: irq 89 for MSI/MSI-X
[ 26.331002] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.502647] fglrx_pci 0000:08:00.0: irq 92 for MSI/MSI-X
[ 26.503360] [fglrx] Firegl kernel thread PID: 1945
[ 26.503482] [fglrx] Firegl kernel thread PID: 1946
[ 26.503605] [fglrx] Firegl kernel thread PID: 1947
[ 26.503701] [fglrx] IRQ 92 Enabled
[ 26.513901] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.513904] [fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[ 26.513905] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[ 26.513907] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 26.541600] fglrx_pci 0000:01:00.0: irq 93 for MSI/MSI-X
[ 26.542367] [fglrx] Firegl kernel thread PID: 1955
[ 26.542495] [fglrx] Firegl kernel thread PID: 1956
[ 26.542643] [fglrx] Firegl kernel thread PID: 1957
[ 26.542766] [fglrx] IRQ 93 Enabled
[ 26.553772] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 26.553774] [fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[ 26.553776] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[ 26.553777] [fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
[ 30.020794] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 30.020973] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.182789] NET: Registered protocol family 17
[ 37.660644] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 37.707163] hda-intel: IRQ timing workaround is activated for card #3. Suggest a bigger bdl_pos_adj.
[ 38.055547] EXT4-fs (sdb1): re-mounted. Opts: acl,user_xattr,commit=0
[ 38.057710] EXT4-fs (sdc2): re-mounted. Opts: commit=0
[ 55.255969] RPC: Registered named UNIX socket transport module.
[ 55.255973] RPC: Registered udp transport module.
[ 55.255975] RPC: Registered tcp transport module.
[ 55.255976] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 55.312643] vboxdrv: Found 4 processor cores.
[ 55.312785] vboxdrv: fAsync=0 offMin=0x460 offMax=0x1f58
[ 55.312864] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 55.312866] vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
[ 55.431033] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 55.588221] vboxpci: IOMMU not found (not registered)
[ 55.599675] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 55.599839] NFSD: starting 90-second grace period (net ffffffff81a86c00)
[ 55.796174] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 55.796176] EDD information not available.
[ 56.055794] it87: Found IT8721F chip at 0x290, revision 1
[ 56.110810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 56.110813] Bluetooth: BNEP filters: protocol multicast
[ 56.110821] Bluetooth: BNEP socket layer initialized
[ 56.188146] Bluetooth: RFCOMM TTY layer initialized
[ 56.188158] Bluetooth: RFCOMM socket layer initialized
[ 56.188160] Bluetooth: RFCOMM ver 1.11
[ 71.410738] fuse init (API version 7.21)
[ 149.389461] FS-Cache: Loaded
[ 149.464631] FS-Cache: Netfs 'nfs' registered for caching
[ 149.524874] NFS: Registering the id_resolver key type
[ 149.524887] Key type id_resolver registered
[ 149.524889] Key type id_legacy registered
[ 159.532147] usb 8-1: new high-speed USB device number 2 using xhci_hcd
[ 159.581641] usb 8-1: New USB device found, idVendor=0951, idProduct=1665
[ 159.581645] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 159.581647] usb 8-1: Product: DataTraveler 2.0
[ 159.581649] usb 8-1: Manufacturer: Kingston
[ 159.581650] usb 8-1: SerialNumber: 50E5495131F7FE1039507CFB
[ 159.581760] usb 8-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 159.581765] usb 8-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 159.582689] scsi11 : usb-storage 8-1:1.0
[ 160.864120] scsi 11:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[ 160.864528] sd 11:0:0:0: [sdg] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
[ 160.864601] sd 11:0:0:0: Attached scsi generic sg6 type 0
[ 160.864776] sd 11:0:0:0: [sdg] Write Protect is off
[ 160.864781] sd 11:0:0:0: [sdg] Mode Sense: 45 00 00 00
[ 160.865013] sd 11:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 160.868169] sdg: sdg1 sdg2
[ 160.869181] sd 11:0:0:0: [sdg] Attached SCSI removable disk
[ 161.146370] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 161.149026] FAT-fs (sdg2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 188.627395] usb 5-5: new full-speed USB device number 2 using ohci_hcd
[ 188.777503] usb 5-5: New USB device found, idVendor=0471, idProduct=0666
[ 188.777507] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 188.777509] usb 5-5: Product: MD100
[ 188.777510] usb 5-5: Manufacturer: SoundKing
[ 188.879903] usbcore: registered new interface driver snd-usb-audio
[ 192.129076] usb 8-1: USB disconnect, device number 2
[ 1178.887385] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[11166.333628] usb 10-2: USB disconnect, device number 2
[11166.333633] usb 10-2.1: USB disconnect, device number 3
[11166.333635] usb 10-2.1.1: USB disconnect, device number 4
[11166.669077] usb 10-2: new high-speed USB device number 5 using xhci_hcd
[11166.715259] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[11166.715263] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11166.716040] hub 10-2:1.0: USB hub found
[11166.716111] hub 10-2:1.0: 2 ports detected
[11166.989228] usb 10-2.1: new high-speed USB device number 6 using xhci_hcd
[11167.035364] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[11167.035368] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11167.036174] hub 10-2.1:1.0: USB hub found
[11167.036244] hub 10-2.1:1.0: 4 ports detected
[11167.310279] usb 10-2.1.1: new high-speed USB device number 7 using xhci_hcd
[11167.430228] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[11167.430233] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11167.430235] usb 10-2.1.1: Product: Flash Card Reader
[11167.430236] usb 10-2.1.1: Manufacturer: Generic
[11167.430237] usb 10-2.1.1: SerialNumber: 26020128B005
[11167.431301] scsi12 : usb-storage 10-2.1.1:1.0
[11168.443274] scsi 12:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[11168.443631] sd 12:0:0:0: Attached scsi generic sg4 type 0
[11168.450411] scsi 12:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[11168.450887] sd 12:0:0:1: Attached scsi generic sg5 type 0
[11168.594567] sd 12:0:0:0: [sde] Attached SCSI removable disk
[11168.602659] sd 12:0:0:1: [sdf] Attached SCSI removable disk
[11183.318457] usb 10-2: USB disconnect, device number 5
[11183.318462] usb 10-2.1: USB disconnect, device number 6
[11183.318464] usb 10-2.1.1: USB disconnect, device number 7
[11183.650215] usb 10-2: new high-speed USB device number 8 using xhci_hcd
[11183.696396] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[11183.696400] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11183.697202] hub 10-2:1.0: USB hub found
[11183.697279] hub 10-2:1.0: 2 ports detected
[11183.970320] usb 10-2.1: new high-speed USB device number 9 using xhci_hcd
[11184.016531] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[11184.016535] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11184.017474] hub 10-2.1:1.0: USB hub found
[11184.017542] hub 10-2.1:1.0: 4 ports detected
[11184.291423] usb 10-2.1.1: new high-speed USB device number 10 using xhci_hcd
[11184.411348] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[11184.411353] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11184.411355] usb 10-2.1.1: Product: Flash Card Reader
[11184.411364] usb 10-2.1.1: Manufacturer: Generic
[11184.411365] usb 10-2.1.1: SerialNumber: 26020128B005
[11184.412988] scsi13 : usb-storage 10-2.1.1:1.0
[11185.423345] scsi 13:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[11185.423507] sd 13:0:0:0: Attached scsi generic sg4 type 0
[11185.430820] scsi 13:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[11185.430964] sd 13:0:0:1: Attached scsi generic sg5 type 0
[11185.575105] sd 13:0:0:0: [sde] Attached SCSI removable disk
[11185.584205] sd 13:0:0:1: [sdf] Attached SCSI removable disk
[11694.691174] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[11709.659049] usb 10-2: USB disconnect, device number 8
[11709.659054] usb 10-2.1: USB disconnect, device number 9
[11709.659056] usb 10-2.1.1: USB disconnect, device number 10
[11713.687240] usb 10-2: new high-speed USB device number 11 using xhci_hcd
[11713.733407] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[11713.733412] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11713.735511] hub 10-2:1.0: USB hub found
[11713.735598] hub 10-2:1.0: 2 ports detected
[11714.008327] usb 10-2.1: new high-speed USB device number 12 using xhci_hcd
[11714.055465] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[11714.055469] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[11714.056254] hub 10-2.1:1.0: USB hub found
[11714.056486] hub 10-2.1:1.0: 4 ports detected
[11714.330435] usb 10-2.1.1: new high-speed USB device number 13 using xhci_hcd
[11714.450565] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[11714.450569] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11714.450571] usb 10-2.1.1: Product: Flash Card Reader
[11714.450573] usb 10-2.1.1: Manufacturer: Generic
[11714.450574] usb 10-2.1.1: SerialNumber: 26020128B005
[11714.457463] scsi14 : usb-storage 10-2.1.1:1.0
[11715.474790] scsi 14:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[11715.475846] sd 14:0:0:0: Attached scsi generic sg4 type 0
[11715.481712] scsi 14:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[11715.481868] sd 14:0:0:1: Attached scsi generic sg5 type 0
[11715.632399] sd 14:0:0:0: [sde] Attached SCSI removable disk
[11715.640731] sd 14:0:0:1: [sdf] Attached SCSI removable disk
[11740.593133] usb 10-2: USB disconnect, device number 11
[11740.593138] usb 10-2.1: USB disconnect, device number 12
[11740.593140] usb 10-2.1.1: USB disconnect, device number 13
[12209.204056] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[22597.163115] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[23491.873060] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[28593.081310] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[29853.396573] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[32438.999927] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[36144.867136] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[38445.402411] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[40400.879145] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[40616.870337] usb 10-2: new high-speed USB device number 14 using xhci_hcd
[40616.917495] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[40616.917499] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[40616.918318] hub 10-2:1.0: USB hub found
[40616.918384] hub 10-2:1.0: 2 ports detected
[40617.192464] usb 10-2.1: new high-speed USB device number 15 using xhci_hcd
[40617.238559] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[40617.238563] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[40617.239401] hub 10-2.1:1.0: USB hub found
[40617.240171] hub 10-2.1:1.0: 4 ports detected
[40617.515543] usb 10-2.1.1: new high-speed USB device number 16 using xhci_hcd
[40617.635651] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[40617.635655] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[40617.635657] usb 10-2.1.1: Product: Flash Card Reader
[40617.635659] usb 10-2.1.1: Manufacturer: Generic
[40617.635660] usb 10-2.1.1: SerialNumber: 26020128B005
[40617.637023] scsi15 : usb-storage 10-2.1.1:1.0
[40618.648581] scsi 15:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[40618.649137] sd 15:0:0:0: Attached scsi generic sg4 type 0
[40618.655826] scsi 15:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[40618.655989] sd 15:0:0:1: Attached scsi generic sg5 type 0
[40618.758044] sd 15:0:0:0: [sde] Attached SCSI removable disk
[40618.778799] sd 15:0:0:1: [sdf] Attached SCSI removable disk
[40626.761480] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[40634.135947] device eth0 entered promiscuous mode
[40922.993149] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[41047.620580] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[41177.179576] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[41189.126856] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[41388.285563] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[41868.134023] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[42013.456326] device eth0 left promiscuous mode
[42013.858617] vboxnetflt: dropped 0 out of 173763 packets
[42028.817431] usb 10-2: USB disconnect, device number 14
[42028.817435] usb 10-2.1: USB disconnect, device number 15
[42028.817437] usb 10-2.1.1: USB disconnect, device number 16
[46370.276718] usb 10-2: new high-speed USB device number 17 using xhci_hcd
[46370.322865] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[46370.322869] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[46370.323694] hub 10-2:1.0: USB hub found
[46370.323860] hub 10-2:1.0: 2 ports detected
[46370.596829] usb 10-2.1: new high-speed USB device number 18 using xhci_hcd
[46370.642953] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[46370.642957] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[46370.643782] hub 10-2.1:1.0: USB hub found
[46370.643853] hub 10-2.1:1.0: 4 ports detected
[46370.917912] usb 10-2.1.1: new high-speed USB device number 19 using xhci_hcd
[46371.038044] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[46371.038048] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[46371.038050] usb 10-2.1.1: Product: Flash Card Reader
[46371.038051] usb 10-2.1.1: Manufacturer: Generic
[46371.038053] usb 10-2.1.1: SerialNumber: 26020128B005
[46371.039280] scsi16 : usb-storage 10-2.1.1:1.0
[46372.051805] scsi 16:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[46372.051992] sd 16:0:0:0: Attached scsi generic sg4 type 0
[46372.058795] scsi 16:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[46372.058964] sd 16:0:0:1: Attached scsi generic sg5 type 0
[46372.201224] sd 16:0:0:0: [sde] Attached SCSI removable disk
[46372.209381] sd 16:0:0:1: [sdf] Attached SCSI removable disk
[47285.247347] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[47602.237515] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[47651.111811] usb 10-2: USB disconnect, device number 17
[47651.111815] usb 10-2.1: USB disconnect, device number 18
[47651.111817] usb 10-2.1.1: USB disconnect, device number 19
[47651.445460] usb 10-2: new high-speed USB device number 20 using xhci_hcd
[47651.491613] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[47651.491618] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[47651.492439] hub 10-2:1.0: USB hub found
[47651.492612] hub 10-2:1.0: 2 ports detected
[47651.765566] usb 10-2.1: new high-speed USB device number 21 using xhci_hcd
[47651.811700] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[47651.811704] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[47651.812562] hub 10-2.1:1.0: USB hub found
[47651.812637] hub 10-2.1:1.0: 4 ports detected
[47652.086669] usb 10-2.1.1: new high-speed USB device number 22 using xhci_hcd
[47652.206609] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[47652.206613] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[47652.206615] usb 10-2.1.1: Product: Flash Card Reader
[47652.206617] usb 10-2.1.1: Manufacturer: Generic
[47652.206618] usb 10-2.1.1: SerialNumber: 26020128B005
[47652.207591] scsi17 : usb-storage 10-2.1.1:1.0
[47653.218584] scsi 17:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[47653.218984] sd 17:0:0:0: Attached scsi generic sg4 type 0
[47653.226152] scsi 17:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[47653.226313] sd 17:0:0:1: Attached scsi generic sg5 type 0
[47653.285387] sd 17:0:0:0: [sde] Attached SCSI removable disk
[47653.289304] sd 17:0:0:1: [sdf] Attached SCSI removable disk
[47821.849561] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[48706.189207] conky[2318]: segfault at 25 ip 00007faffcb7ef54 sp 00007fffd39d9220 error 4 in libc-2.11.3.so[7faffcb39000+164000]
[50278.593533] [fglrx] IRQ 92 Disabled
[50278.605755] [fglrx] IRQ 93 Disabled
[50278.606554] [fglrx] module unloaded - fglrx 13.35.5 [Mar 12 2014]
[50284.402775] [fglrx] Maximum main memory to use for locked dma buffers: 15624 MBytes.
[50284.403059] [fglrx] vendor: 1002 device: 683f count: 1
[50284.403072] [fglrx] vendor: 1002 device: 6811 count: 2
[50284.403609] [fglrx] ioport: bar 4, base 0xa000, size: 0x100
[50284.403705] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[50284.403937] [fglrx] Kernel PAT support is enabled
[50284.403957] [fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 2 minors
[50289.693690] fglrx_pci 0000:08:00.0: irq 92 for MSI/MSI-X
[50289.694436] [fglrx] Firegl kernel thread PID: 17952
[50289.694604] [fglrx] Firegl kernel thread PID: 17953
[50289.694742] [fglrx] Firegl kernel thread PID: 17954
[50289.694857] [fglrx] IRQ 92 Enabled
[50289.704669] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[50289.704671] [fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[50289.704672] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[50289.704674] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[50289.737916] fglrx_pci 0000:01:00.0: irq 93 for MSI/MSI-X
[50289.738711] [fglrx] Firegl kernel thread PID: 17955
[50289.738847] [fglrx] Firegl kernel thread PID: 17956
[50289.738992] [fglrx] Firegl kernel thread PID: 17957
[50289.739114] [fglrx] IRQ 93 Enabled
[50289.749367] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[50289.749370] [fglrx] Reserved FB block: Unshared offset:f878000, size:4000
[50289.749371] [fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[50289.749373] [fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
[50354.528062] usb 10-2: USB disconnect, device number 20
[50354.528066] usb 10-2.1: USB disconnect, device number 21
[50354.528068] usb 10-2.1.1: USB disconnect, device number 22
[50629.967273] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[50904.974172] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[52220.283571] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[52270.356405] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[56036.165971] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[56566.376572] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[58621.787922] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[63707.991108] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[64603.199869] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[65038.283287] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[67914.011924] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[69039.263744] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[70929.686544] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[75025.762100] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[82622.447874] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[88233.778150] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[90979.421413] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[92024.674839] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[92029.697113] [fglrx:KAS_Mutex_Release] *ERROR* Mutex released without holding it.
[106416.128237] usb 10-2: new high-speed USB device number 23 using xhci_hcd
[106416.174394] usb 10-2: New USB device found, idVendor=0424, idProduct=2502
[106416.174398] usb 10-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[106416.175232] hub 10-2:1.0: USB hub found
[106416.175306] hub 10-2:1.0: 2 ports detected
[106416.448375] usb 10-2.1: new high-speed USB device number 24 using xhci_hcd
[106416.494471] usb 10-2.1: New USB device found, idVendor=0424, idProduct=2602
[106416.494475] usb 10-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[106416.495341] hub 10-2.1:1.0: USB hub found
[106416.495415] hub 10-2.1:1.0: 4 ports detected
[106416.769456] usb 10-2.1.1: new high-speed USB device number 25 using xhci_hcd
[106416.889597] usb 10-2.1.1: New USB device found, idVendor=0424, idProduct=2228
[106416.889602] usb 10-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[106416.889604] usb 10-2.1.1: Product: Flash Card Reader
[106416.889606] usb 10-2.1.1: Manufacturer: Generic
[106416.889607] usb 10-2.1.1: SerialNumber: 26020128B005
[106416.890625] scsi18 : usb-storage 10-2.1.1:1.0
[106417.901502] scsi 18:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[106417.901714] sd 18:0:0:0: Attached scsi generic sg4 type 0
[106417.908382] scsi 18:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[106417.908544] sd 18:0:0:1: Attached scsi generic sg5 type 0
[106418.045744] sd 18:0:0:1: [sdf] Attached SCSI removable disk
[106418.050299] sd 18:0:0:0: [sde] Attached SCSI removable disk
[107546.025084] device eth0 entered promiscuous mode
[108316.348700] device eth0 left promiscuous mode
[108316.805835] vboxnetflt: dropped 0 out of 87326 packets
[108366.048308] usb 10-2: USB disconnect, device number 23
[108366.048313] usb 10-2.1: USB disconnect, device number 24
[108366.048315] usb 10-2.1.1: USB disconnect, device number 25