dmesg - systemtest_1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cd385fff] usable
BIOS-e820: [mem 0x00000000cd386000-0x00000000cd38cfff] ACPI NVS
BIOS-e820: [mem 0x00000000cd38d000-0x00000000dd7fbfff] usable
BIOS-e820: [mem 0x00000000dd7fc000-0x00000000dd8e8fff] reserved
BIOS-e820: [mem 0x00000000dd8e9000-0x00000000dd941fff] usable
BIOS-e820: [mem 0x00000000dd942000-0x00000000dda76fff] ACPI NVS
BIOS-e820: [mem 0x00000000dda77000-0x00000000df7fefff] reserved
BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Thomas-Krenn.AG X10SLH-F/X10SLM+-F/X10SLH-F/X10SLM+-F, BIOS 1.1a 11/01/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x820000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7800000000 write-back
1 base 0800000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
total RAM covered: 32768M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 512MB, type WB
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x81fe00000-0x81fffffff]
[mem 0x81fe00000-0x81fffffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x81c000000-0x81fdfffff]
[mem 0x81c000000-0x81fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x81bffffff]
[mem 0x800000000-0x81bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcd385fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcd1fffff] page 2M
[mem 0xcd200000-0xcd385fff] page 4k
init_memory_mapping: [mem 0xcd38d000-0xdd7fbfff]
[mem 0xcd38d000-0xcd3fffff] page 4k
[mem 0xcd400000-0xdd5fffff] page 2M
[mem 0xdd600000-0xdd7fbfff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xdd8e9000-0xdd941fff]
[mem 0xdd8e9000-0xdd941fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xdf7ff000-0xdf7fffff]
[mem 0xdf7ff000-0xdf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x35ba2000-0x36dc8fff]
ACPI: RSDP 00000000000f0490 000024 (v02 SUPERM)
ACPI: XSDT 00000000dda4a0a0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FACP 00000000dda58a88 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 00000000dda4a1f0 00E894 (v02 SUPERM SMCI--MB 00000000 INTL 20120711)
ACPI: FACS 00000000dda75080 000040
ACPI: APIC 00000000dda58b98 000092 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 00000000dda58c30 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: LPIT 00000000dda58c78 00005C (v01 SUPERM SMCI--MB 00000000 AMI. 00000005)
ACPI: SSDT 00000000dda58cd8 000540 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000dda59218 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: SSDT 00000000dda59cf0 0002F2 (v01 PmRef Cpu0Tst 00003000 INTL 20120711)
ACPI: SSDT 00000000dda59fe8 000348 (v01 PmRef ApTst 00003000 INTL 20120711)
ACPI: MCFG 00000000dda5a330 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: PRAD 00000000dda5a370 0000CE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: HPET 00000000dda5a440 000038 (v01 SUPERM SMCI--MB 01072009 AMI. 00000005)
ACPI: SSDT 00000000dda5a478 000397 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000dda5a810 0032E0 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: SPMI 00000000dda5daf0 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: DMAR 00000000dda5db30 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: EINJ 00000000dda5dbb0 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 00000000dda5dce0 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 00000000dda5df10 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 00000000dda5dfb8 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081fffffff]
Initmem setup node 0 [mem 0x00000000-0x81fffffff]
NODE_DATA [mem 0x81fff8000-0x81fffcfff]
[ffffea0000000000-ffffea00207fffff] PMD -> [ffff8807ff600000-ffff88081f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x81fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00098fff]
node 0: [mem 0x00100000-0xcd385fff]
node 0: [mem 0xcd38d000-0xdd7fbfff]
node 0: [mem 0xdd8e9000-0xdd941fff]
node 0: [mem 0xdf7ff000-0xdf7fffff]
node 0: [mem 0x100000000-0x81fffffff]
On node 0 totalpages: 8378343
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3992 pages, LIFO batch:0
DMA32 zone: 14114 pages used for memmap
DMA32 zone: 903247 pages, LIFO batch:31
Normal zone: 116736 pages used for memmap
Normal zone: 7471104 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd386000-0xcd38cfff]
PM: Registered nosave memory: [mem 0xdd7fc000-0xdd8e8fff]
PM: Registered nosave memory: [mem 0xdd942000-0xdda76fff]
PM: Registered nosave memory: [mem 0xdda77000-0xdf7fefff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88081fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8247408
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32886868K/33513372K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 626504K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.866 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.73 BogoMIPS (lpj=13599464)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
dmar: RMRR base: 0x000000df69b000 end: 0x000000df6a9fff
IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54397.85 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcd386000-0xcd38cfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdd942000-0xdda76fff] (1265664 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:49:51, date: 04/22/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
_OSC request data:1 1f
ACPI: SSDT 00000000dd8dec18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000dd8de618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000dd8ddd98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0x820000000-0xc1fffffff]
pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7317000-0xf731700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xf7316000-0xf731600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7314000-0xf73143ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7313000-0xf73133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037]
pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7312000-0xf73127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7311000-0xf73110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf7310000-0xf7310fff 64bit]
pci 0000:01:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:02:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xf7000000-0xf701ffff]
pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf727ffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xf7280000-0xf7283fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xf7100000-0xf717ffff]
pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xf7180000-0xf7183fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd386000-0xcfffffff]
e820: reserve RAM buffer [mem 0xdd7fc000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd942000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x0ca4-0x0ca7] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a1f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [io 0x0a00-0x0a1f] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [io 0x04d0-0x04d1] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [dma 0 disabled]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0e: Plug and Play ACPI device, IDs IPI0001 (active)
system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0f: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0f: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0f: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0f: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0f: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0f: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0f: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0f: [mem 0xff000000-0xffffffff] has been reserved
system 00:0f: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0f: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0f: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 16 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 13 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 14 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:00: resource 15 [mem 0x820000000-0xc1fffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18588K (ffff880035ba2000 - ffff880036dc9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd97fc000-0xdd7fc000] (64MB) mapped at [ffff8800d97fc000-ffff8800dd7fbfff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x17
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1398167390.460:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf6000000, mapped to 0xffffc90007600000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
\_SB_:_OSC request failed
_OSC request data:1 1 0
_OSC request data:1 1 0
GHES: APEI firmware first mode is enabled by APEI bit.
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:0d: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7314000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7313000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 3399.981 MHz
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:593:833
rtc_cmos 00:06: setting system clock to 2014-04-22 11:49:53 UTC (1398167393)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[145]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:03:00.0: irq 46 for MSI/MSI-X
igb 0000:03:00.0: irq 47 for MSI/MSI-X
igb 0000:03:00.0: irq 48 for MSI/MSI-X
igb 0000:03:00.0: irq 49 for MSI/MSI-X
igb 0000:03:00.0: irq 50 for MSI/MSI-X
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:02:4f:08
igb 0000:03:00.0: eth0: PBA No: 012000-000
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:04:00.0: irq 51 for MSI/MSI-X
igb 0000:04:00.0: irq 52 for MSI/MSI-X
igb 0000:04:00.0: irq 53 for MSI/MSI-X
igb 0000:04:00.0: irq 54 for MSI/MSI-X
igb 0000:04:00.0: irq 55 for MSI/MSI-X
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312280 irq 45
ata5: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xf7312000 port 0xf7312380 irq 45
igb 0000:04:00.0: added PHC on eth1
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:02:4f:09
igb 0000:04:00.0: eth1: PBA No: 011000-000
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: INTEL SSDSC2BA200G3, 5DV10265, max UDMA/133
ata1.00: 390721968 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BA20 5DV1 PQ: 0 ANSI: 5
ata4.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata3.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATA-8: WDC WD2000FYYZ-01UL1B1, 01.01K02, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
sda: sda1 sda2 < sda5 >
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA WDC WD2000FYYZ-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD2000FYYZ-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD2000FYYZ-0 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
Switched to clocksource tsc
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 2 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci-pci
random: init urandom read with 89 bits of entropy available
init: plymouth-upstart-bridge main process (224) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (234) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (237) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (240) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Adding 33512444k swap on /dev/sda5. Priority:-1 extents:1 across:33512444k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[347]: starting version 204
usb 3-7: new high-speed USB device number 2 using xhci_hcd
usb 3-7: New USB device found, idVendor=0000, idProduct=0001
usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-7:1.0: USB hub found
hub 3-7:1.0: 4 ports detected
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0e: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
mei_me 0000:00:16.0: initialization failed.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
random: nonblocking pool is initialized
[drm] Initialized drm 1.1.0 20060810
type=1400 audit(1398167394.410:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=419 comm="apparmor_parser"
type=1400 audit(1398167394.410:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=419 comm="apparmor_parser"
type=1400 audit(1398167394.410:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=419 comm="apparmor_parser"
type=1400 audit(1398167394.410:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=419 comm="apparmor_parser"
type=1400 audit(1398167394.410:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=419 comm="apparmor_parser"
[drm] AST 2300 detected
[drm] dram 1632000000 1 16 01000000
[TTM] Zone kernel: Available graphics memory: 16454186 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
type=1400 audit(1398167394.414:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
type=1400 audit(1398167394.414:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
type=1400 audit(1398167394.414:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
type=1400 audit(1398167394.414:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
usb 3-9: new low-speed USB device number 3 using xhci_hcd
usb 3-9: New USB device found, idVendor=413c, idProduct=2003
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Dell USB Keyboard
usb 3-9: Manufacturer: Dell
usb 3-9: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
checking generic (f6000000 300000) vs hw (f6000000 1000000)
fb: conflicting fb hw usage astdrmfb vs VESA VGA - removing generic driver
ipmi_si 00:0e: Found new BMC (man_id: 0x002a7c, prod_id: 0x0803, dev_id: 0x20)
ipmi_si 00:0e: IPMI kcs interface initialized
usb 3-10: new low-speed USB device number 4 using xhci_hcd
usb 3-10: New USB device found, idVendor=045e, idProduct=00d1
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: Microsoft Optical Mouse with Tilt Wheel
usb 3-10: Manufacturer: Microsoft
usb 3-10: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input2
hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-9/input0
input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input3
hid-generic 0003:045E:00D1.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:14.0-10/input0
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
usb 3-7.1: new low-speed USB device number 5 using xhci_hcd
ast 0000:02:00.0: fb0: astdrmfb frame buffer device
ast 0000:02:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0000:02:00.0 on minor 0
usb 3-7.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-7.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-7.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.0/input/input4
hid-generic 0003:0557:2419.0003: input,hidraw2: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-7.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7.1/3-7.1:1.1/input/input5
hid-generic 0003:0557:2419.0004: input,hidraw3: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-7.1/input1
init: udev-fallback-graphics main process (588) terminated with status 1
init: failsafe main process (654) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (854) killed by HUP signal
init: cups main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
audit_printk_skb: 126 callbacks suppressed
type=1400 audit(1398167424.223:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2124 comm="apparmor_parser"
type=1400 audit(1398167424.223:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2124 comm="apparmor_parser"
type=1400 audit(1398167424.223:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2124 comm="apparmor_parser"
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-6: new high-speed USB device number 6 using xhci_hcd
usb 3-6: New USB device found, idVendor=13fd, idProduct=0840
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: External
usb 3-6: Manufacturer: Generic
usb 3-6: SerialNumber: 575037322020303033323239
usb-storage 3-6:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-6:1.0
usbcore: registered new interface driver usb-storage
scsi 6:0:0:0: CD-ROM MATSHITA BD-MLT UJ260AF 1.00 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg4 type 5