dmesg - TEST
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@komainu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007cfeffff] usable
BIOS-e820: [mem 0x000000007cff0000-0x000000007cffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7cff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b39000, 0x01b39fff] PGTABLE
RAMDISK: [mem 0x34ea2000-0x36748fff]
ACPI: RSDP 000e0000 00024 (v02 VBOX )
ACPI: XSDT 7cff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 7cff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 7cff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 7cff0200 00040
ACPI: SSDT 7cff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
1107MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b3a000, 0x01b3afff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7cfeffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7cfeffff]
On node 0 totalpages: 511886
free_area_init_node: node 0, pgdat c1948bc0, node_mem_map f6c5e020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 2216 pages used for memmap
HighMem zone: 283634 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x7d000000-0xfffbffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f6c44000 s36288 r0 d21056 u57344
pcpu-alloc: s36288 r0 d21056 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510102
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 4095864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007cff0)
Memory: 1989824K/2047544K available (6351K kernel code, 607K rwdata, 2640K rodata, 880K init, 908K bss, 57720K reserved, 1134536K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1962000 - 0xc1a3e000 ( 880 kB)
.data : 0xc16341e4 - 0xc1961e00 (3255 kB)
.text : 0xc1000000 - 0xc16341e4 (6352 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f4806000 soft=f4808000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 3495.020 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6990.04 BogoMIPS (lpj=13980080)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 28K (c1a3e000 - c1a45000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0e00)
ftrace: allocating 27134 entries in 53 pages
smpboot: weird, boot CPU (#0) not listed by the BIOS
smpboot: SMP motherboard not detected
Enabling APIC mode: Flat. Using 0 I/O APICs
smpboot: SMP disabled
Performance Events: Broken PMU hardware detected, using software events only.
Failed to access perfctr msr (MSR c0010004 is 0)
Brought up 1 CPUs
smpboot: Total of 1 processors activated (6990.04 BogoMIPS)
NMI watchdog: disabled (cpu0): hardware events not enabled
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
regulator-dummy: no parameters
RTC time: 17:45:34, date: 04/18/14
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x7d000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 1 GPEs in block 00 to 07
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7cff0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 4 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
Switched to clocksource acpi_pm
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25244K (f4ea2000 - f6749000)
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1397843134.679:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1719
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
ACPI: Battery Slot [BAT0] (battery present)
isapnp: Scanning for PnP cards...
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4b7c2664fb134f99aaf5e09f5b6d30d43b5eac95'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 10:379:795
rtc_cmos rtc_cmos: setting system clock to 2014-04-18 17:45:35 UTC (1397843135)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
isapnp: No Plug & Play device found
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 880K (c1962000 - c1a3e000)
Write protecting the kernel text: 6356k
Write protecting the kernel read-only data: 2644k
NX-protecting the kernel data: 5932k
systemd-udevd[94]: starting version 204
e1000: module verification failed: signature and/or required key missing - tainting kernel
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
e1000 0000:00:03.0: setting latency timer to 64
ohci-pci: OHCI PCI platform driver
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:57:5a:37
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ahci 0000:00:0d.0: version 3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
ahci 0000:00:0d.0: setting latency timer to 64
scsi2 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
ohci-pci 0000:00:06.0: setting latency timer to 64
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:06.0: irq 11, io mem 0xf0804000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
usb usb1: SerialNumber: 0000:00:06.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 209715200 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 209715200 512-byte logical blocks: (107 GB/100 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-1: new full-speed USB device number 2 using ohci-pci
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input3
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
tsc: Refined TSC clocksource calibration: 3494.979 MHz
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: your processor doesn't support write-combining
vesafb: framebuffer at 0xe0000000, mapped to 0xf8500000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
raid6: mmxx1 1674 MB/s
raid6: mmxx2 2625 MB/s
raid6: sse1x1 1658 MB/s
raid6: sse1x2 2696 MB/s
raid6: sse2x1 2755 MB/s
raid6: sse2x2 3366 MB/s
raid6: using algorithm sse2x2 (3366 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: measuring software checksum speed
pIII_sse : 871.000 MB/sec
prefetch64-sse: 670.000 MB/sec
xor: using function: pIII_sse (871.000 MB/sec)
Switched to clocksource tsc
bio: create slab at 1
Btrfs loaded
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2044924k swap on /dev/sda5. Priority:-1 extents:1 across:2044924k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[353]: starting version 204
lp: driver loaded but no devices found
parport_pc 00:03: reported by Plug and Play ACPI
type=1400 audit(1397861141.035:2): apparmor="STATUS" operation="profile_load" parent=429 profile="unconfined" name="/sbin/dhclient" pid=430 comm="apparmor_parser"
type=1400 audit(1397861141.035:3): apparmor="STATUS" operation="profile_load" parent=429 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
type=1400 audit(1397861141.035:4): apparmor="STATUS" operation="profile_load" parent=429 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
type=1400 audit(1397861141.035:5): apparmor="STATUS" operation="profile_replace" parent=429 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
type=1400 audit(1397861141.035:6): apparmor="STATUS" operation="profile_replace" parent=429 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
type=1400 audit(1397861141.039:7): apparmor="STATUS" operation="profile_replace" parent=429 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
type=1400 audit(1397861141.043:8): apparmor="STATUS" operation="profile_load" parent=429 profile="unconfined" name="/usr/sbin/ntpd" pid=434 comm="apparmor_parser"
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
microcode: CPU0: patch_level=0x00000000
microcode: CPU0: update failed for patch_level=0x0600063d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
device-mapper: multipath: version 1.5.1 loaded
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (529) terminated with status 1
type=1400 audit(1397861141.991:9): apparmor="STATUS" operation="profile_load" parent=544 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=553 comm="apparmor_parser"
type=1400 audit(1397861141.991:10): apparmor="STATUS" operation="profile_load" parent=544 profile="unconfined" name="/usr/sbin/cupsd" pid=553 comm="apparmor_parser"
type=1400 audit(1397861141.991:11): apparmor="STATUS" operation="profile_replace" parent=544 profile="unconfined" name="/usr/sbin/cupsd" pid=553 comm="apparmor_parser"
init: failsafe main process (606) killed by TERM signal
snd_intel8x0 0000:00:05.0: setting latency timer to 64
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
intel8x0_measure_ac97_clock: measured 58752 usecs (9876 samples)
intel8x0: measured clock 168096 rejected
intel8x0_measure_ac97_clock: measured 56485 usecs (7680 samples)
intel8x0: measured clock 135965 rejected
init: alsa-restore main process (894) terminated with status 19
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 1 device(s) ...
Adding 1007984k swap on /dev/zram0. Priority:5 extents:1 across:1007984k SSFS
intel8x0_measure_ac97_clock: measured 56927 usecs (7680 samples)
intel8x0: measured clock 134909 rejected
intel8x0: clocking to 48000
audit_printk_skb: 117 callbacks suppressed
type=1400 audit(1397861150.311:51): apparmor="DENIED" operation="open" parent=1367 profile="/usr/sbin/ntpd" name="/etc/ld.so.preload" pid=1395 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
init: plymouth-stop pre-start process (1449) terminated with status 1
type=1400 audit(1397843098.474:52): apparmor="DENIED" operation="open" parent=1475 profile="/usr/sbin/ntpd" name="/etc/ld.so.preload" pid=1483 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
type=1400 audit(1397843113.389:53): apparmor="DENIED" operation="open" parent=1537 profile="/usr/sbin/ntpd" name="/etc/ld.so.preload" pid=1545 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
type=1400 audit(1397843951.166:54): apparmor="STATUS" operation="profile_replace" parent=4487 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4491 comm="apparmor_parser"
type=1400 audit(1397843951.166:55): apparmor="STATUS" operation="profile_replace" parent=4487 profile="unconfined" name="/usr/sbin/cupsd" pid=4491 comm="apparmor_parser"
type=1400 audit(1397843951.166:56): apparmor="STATUS" operation="profile_replace" parent=4487 profile="unconfined" name="/usr/sbin/cupsd" pid=4491 comm="apparmor_parser"
type=1400 audit(1397843951.170:57): apparmor="DENIED" operation="open" parent=1 profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=4494 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
aio-stress-bin[22987]: segfault at 5f5f5fa3 ip 0804913e sp bfcdc608 error 4 in aio-stress-bin[8048000+6000]
aio-stress-bin[23000]: segfault at 5f5f5fa3 ip 0804913e sp bf933118 error 4 in aio-stress-bin[8048000+6000]
aio-stress-bin[23005]: segfault at 5f5f5fa3 ip 0804913e sp bfef4128 error 4 in aio-stress-bin[8048000+6000]
hardinfo[24085]: segfault at 20 ip b7499be1 sp bfe14fe0 error 4 in libgtk-x11-2.0.so.0.2400.20[b725a000+467000]