dmesg - aesi_build-imagemagick_dh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-48-generic (buildd@aatxe) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #72-Ubuntu SMP Mon Mar 10 23:18:29 UTC 2014 (Ubuntu 3.5.0-48.72-generic 3.5.7.31)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17FA, BIOS F.01 08/10/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09D000000 mask FFF000000 uncachable
3 base 09E000000 mask FFE000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 240000000 mask FF0000000 write-back
8 base 250000000 mask FF0000000 write-back
9 base 25FE00000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x9cffffff]
[mem 0x00000000-0x9cffffff] page 2M
kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x25fdfffff]
[mem 0x100000000-0x25fdfffff] page 2M
kernel direct mapping tables up to 0x25fdfffff @ [mem 0x9ce38000-0x9ce3efff]
RAMDISK: [mem 0x36298000-0x37143fff]
ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 000000009cfec000 0C553 (v01 HP INSYDE 00000000 MSFT 01000013)
ACPI: FACS 000000009cf6c000 00040
ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 000000009cfea000 0051F (v01 HP INSYDE 00001000 MSFT 01000013)
ACPI: BOOT 000000009cfe8000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: ASPT 000000009cfe5000 00034 (v07 HP INSYDE 00000001 MSFT 01000013)
ACPI: SSDT 000000009cfe4000 0094E (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 000000009cfe3000 00996 (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 000000009cfe2000 002DA (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 000000009cfe1000 0035D (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 000000009cfdb000 024A1 (v01 HP INSYDE 00001000 INTL 20100121)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
Initmem setup node 0 [mem 0x00000000-0x25fdfffff]
NODE_DATA [mem 0x25fdfc000-0x25fdfffff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x9ce3efff]
node 0: [mem 0x9cfff000-0x9cffffff]
node 0: [mem 0x100000000-0x25fdfffff]
On node 0 totalpages: 2083789
DMA zone: 64 pages used for memmap
DMA zone: 141 pages reserved
DMA zone: 3776 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 622208 pages, LIFO batch:31
Normal zone: 22520 pages used for memmap
Normal zone: 1418760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044744
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8105668k/9959424k available (6721k kernel code, 1624268k absent, 229488k reserved, 6448k data, 936k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.924 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.84 BogoMIPS (lpj=8779696)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25129 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU1: Thermal monitoring handled by SMI
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
CPU4: Thermal monitoring handled by SMI
CPU5: Thermal monitoring handled by SMI
CPU6: Thermal monitoring handled by SMI
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
CPU7: Thermal monitoring handled by SMI
Brought up 8 CPUs
Total of 8 processors activated (35118.78 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
dummy:
RTC time: 17:24:25, date: 04/09/14
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 1 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 0
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x6098-0x609f]
pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf]
pci 0000:00:1f.2: reg 18: [io 0x6090-0x6097]
pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb]
pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f]
pci 0000:01:00.0: [1002:6740] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:0d:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit]
pci 0000:0d:00.0: supports D1 D2
pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:13:00.0: reg 10: [mem 0xc3501000-0xc3501fff]
pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:13:00.0: supports D1 D2
pci 0000:13:00.0: PME# supported from D1 D2 D3hot
pci 0000:13:00.1: [10ec:5209] type 00 class 0x080500
pci 0000:13:00.1: reg 10: [mem 0xc3500000-0xc35000ff]
pci 0000:13:00.1: supports D1 D2
pci 0000:13:00.1: PME# supported from D1 D2 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 13-18]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit]
pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 19-19]
pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
_OSC request data:1 1f 0
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0x1010-0x1013]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x1010-0x1013] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [irq 23]
pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp 00:0c: [mem 0x20000000-0x201fffff]
pnp 00:0c: [mem 0x40000000-0x401fffff]
system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 13-18]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 19-19]
pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Freeing initrd memory: 15024k freed
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x98e38000-0x9ce37fff] (64MB) mapped at [ffff880098e38000-ffff88009ce37fff]
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1397064265.472:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15860
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (49 C)
ACPI: Battery Slot [BAT0] (battery present)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-48-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
ACPI: Battery Slot [BAT0] (battery present)
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-48-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:19:00.0: xHCI Host Controller
xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:19:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-48-generic xhci_hcd
usb usb3: SerialNumber: 0000:19:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:19:00.0: xHCI Host Controller
xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-48-generic xhci_hcd
usb usb4: SerialNumber: 0000:19:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
Magic number: 10:839:440
pcieport 0000:00:1c.1: hash matches
rtc_cmos 00:06: setting system clock to 2014-04-09 17:24:26 UTC (1397064266)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 936k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1460k freed
Freeing unused kernel memory: 1132k freed
udevd[116]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: irq 49 for MSI/MSI-X
r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc900117a6000, 2c:41:38:5d:51:0b, XID 0c900800 IRQ 49
r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
rtsx_pci 0000:13:00.0: irq 50 for MSI/MSI-X
rtsx_pci 0000:13:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 50
sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vmmc regulator found
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 51 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 51
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 51
mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: TOSHIBA MK1059GSM, GL002C, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATAPI: hp CDDVDW TS-L633R, 0400, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GL00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata6.00: configured for UDMA/100
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 5:0:0:0: CD-ROM hp CDDVDW TS-L633R 0400 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
usb 1-1.1: New USB device found, idVendor=138a, idProduct=0018
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-1.1: SerialNumber: c2ddc6b0222e
Refined TSC clocksource calibration: 2195.012 MHz.
Switching to clocksource tsc
EXT3-fs (loop0): recovery required on readonly filesystem
EXT3-fs (loop0): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): recovery complete
EXT3-fs (loop0): mounted filesystem with ordered data mode
Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[446]: starting version 175
EXT3-fs (loop0): using internal journal
bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
type=1400 audit(1397057106.554:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=495 comm="apparmor_parser"
bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
type=1400 audit(1397057106.554:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=495 comm="apparmor_parser"
type=1400 audit(1397057106.554:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=495 comm="apparmor_parser"
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1397057106.554:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=592 comm="apparmor_parser"
type=1400 audit(1397057106.554:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=592 comm="apparmor_parser"
type=1400 audit(1397057106.554:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=592 comm="apparmor_parser"
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 52 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
i915 0000:00:02.0: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
radeon 0000:01:00.0: enabling device (0000 -> 0003)
pci 0000:00:00.0: Intel Sandybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 32768K stolen memory
hp_accel: laptop model unknown, using default axes configuration
mei 0000:00:16.0: wd: failed to find the client
bcma: Bus registered
i915 0000:00:02.0: irq 53 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
microcode: Microcode Update Driver: v2.00 , Peter Oruba
init: failsafe main process (766) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
type=1400 audit(1397057106.838:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=852 comm="apparmor_parser"
type=1400 audit(1397057106.838:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=852 comm="apparmor_parser"
type=1400 audit(1397057106.846:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=878 comm="apparmor_parser"
type=1400 audit(1397057106.846:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=878 comm="apparmor_parser"
r8169 0000:07:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: alsa-restore main process (938) terminated with status 19
lis3lv02d: 8 bits 3DC sensor found
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:2e: registered as cooling_device8
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5
acpi device:3b: registered as cooling_device9
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x103C:0x3388).
[drm] register mmio base: 0xC6500000
[drm] register mmio size: 131072
vga_switcheroo: enabled
radeon atpx: version is 1
cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
ATOM BIOS: HP/Flex
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4062110 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading TURKS Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8801f63b7c00
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 55 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xA0142000
[drm] vram apper at 0xA0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 1
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
Registered led device: hp::hddprotect
hp_accel: driver loaded
wmi: Mapper loaded
input: HP WMI hotkeys as /devices/virtual/input/input8
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
wlan0: authenticate with 30:39:f2:83:ed:96
wlan0: send auth to 30:39:f2:83:ed:96 (try 1/3)
wlan0: authenticated
wlan0: associate with 30:39:f2:83:ed:96 (try 1/3)
wlan0: RX AssocResp from 30:39:f2:83:ed:96 (capab=0x411 status=0 aid=4)
ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
audit_printk_skb: 57 callbacks suppressed
type=1400 audit(1397058579.477:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=23807 comm="apparmor_parser"
type=1400 audit(1397058579.477:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=23807 comm="apparmor_parser"