dmesg - t9_dh
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdea7fff] usable
BIOS-e820: [mem 0x00000000bdea8000-0x00000000bdebefff] reserved
BIOS-e820: [mem 0x00000000bdebf000-0x00000000bdf80fff] usable
BIOS-e820: [mem 0x00000000bdf81000-0x00000000bdfbefff] ACPI NVS
BIOS-e820: [mem 0x00000000bdfbf000-0x00000000bdfdefff] usable
BIOS-e820: [mem 0x00000000bdfdf000-0x00000000bdff6fff] ACPI data
BIOS-e820: [mem 0x00000000bdff7000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.34 09/10/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0FFE00000 mask FFFE00000 write-protect
3 base 0BE000000 mask FFE000000 uncachable
4 base 100000000 mask FC0000000 write-back
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbdea7fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbddfffff] page 2M
[mem 0xbde00000-0xbdea7fff] page 4k
init_memory_mapping: [mem 0xbdebf000-0xbdf80fff]
[mem 0xbdebf000-0xbdf80fff] page 4k
init_memory_mapping: [mem 0xbdfbf000-0xbdfdefff]
[mem 0xbdfbf000-0xbdfdefff] page 4k
init_memory_mapping: [mem 0xbdff7000-0xbdffffff]
[mem 0xbdff7000-0xbdffffff] page 4k
RAMDISK: [mem 0x35ee6000-0x36f6afff]
ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bdff6120 0006C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000bdff4000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 00000000bdfe2000 0D2B7 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 00000000bdf8d000 00040
ACPI: DMAR 00000000bdff5000 00098 (v01 ? 00000001 00000000)
ACPI: HPET 00000000bdff3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 00000000bdff2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 00000000bdff1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASF! 00000000bdff0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 00000000bdfe1000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: BOOT 00000000bdfe0000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 00000000bdfdf000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xbdea7fff]
node 0: [mem 0xbdebf000-0xbdf80fff]
node 0: [mem 0xbdfbf000-0xbdfdefff]
node 0: [mem 0xbdff7000-0xbdffffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1040176
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12095 pages used for memmap
DMA32 zone: 774035 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdea8000-0xbdebefff]
PM: Registered nosave memory: [mem 0xbdf81000-0xbdfbefff]
PM: Registered nosave memory: [mem 0xbdfdf000-0xbdff6fff]
PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023900
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.11.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Hewlett-Packard; Ver: F.34; Product Version: Rev 1
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-12-generic #19-Ubuntu
Hardware name: Hewlett-Packard HP Pavilion dv6 Notebook PC/3628, BIOS F.34 09/10/2009
000000000000000b ffffffff81c01de8 ffffffff816e547a ffffffff81c01e30
ffffffff81c01e20 ffffffff81061dbd ffffffff81fd0010 ffffffff81fd0050
0000000000000000 ffff88013fface40 ffffffff81e72000 ffffffff81c01e80
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x18
[] warn_invalid_dmar+0x7e/0x90
[] check_zero_address+0x68/0xf4
[] detect_intel_iommu+0x15/0xae
[] pci_iommu_alloc+0x4a/0x6c
[] mem_init+0x17/0x9c
[] start_kernel+0x1de/0x416
[] ? repair_env_string+0x5c/0x5c
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x108/0x117
---[ end trace 1ffd90a7cdc48143 ]---
Memory: 3995148K/4160704K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 165556K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.637 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.27 BogoMIPS (lpj=8778548)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
dmar: Host address width 36
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (8778.54 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbdf81000-0xbdfbefff] (253952 bytes)
regulator-dummy: no parameters
RTC time: 18:55:34, date: 04/04/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdeb4c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bdeb2618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000bdeb3e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000bdeb4f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1c) granted
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x80e0-0x80ff]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x80c0-0x80df]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xda105c00-0xda105fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xda100000-0xda103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x80a0-0x80bf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x8080-0x809f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x8060-0x807f]
pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x8040-0x805f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xda105800-0xda105bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x8108-0x810f]
pci 0000:00:1f.2: reg 0x14: [io 0x8114-0x8117]
pci 0000:00:1f.2: reg 0x18: [io 0x8100-0x8107]
pci 0000:00:1f.2: reg 0x1c: [io 0x8110-0x8113]
pci 0000:00:1f.2: reg 0x20: [io 0x8020-0x803f]
pci 0000:00:1f.2: reg 0x24: [mem 0xda105000-0xda1057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xda106000-0xda1060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x8000-0x801f]
pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xda104000-0xda104fff 64bit]
pci 0000:01:00.0: [1002:9553] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0x7000-0x70ff]
pci 0000:01:00.0: reg 0x18: [mem 0xda000000-0xda00ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xda010000-0xda013fff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [14e4:4315] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xd9000000-0xd9003fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd9ffffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x5000-0x50ff]
pci 0000:03:00.0: reg 0x18: [mem 0xd1010000-0xd1010fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xd1000000-0xd100ffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd8ffffff]
pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xd7000000-0xd7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
pci 0000:06:00.0: reg 0x10: [mem 0xd6000000-0xd60007ff]
pci 0000:06:00.0: reg 0x14: [mem 0xd6000d00-0xd6000d7f]
pci 0000:06:00.0: reg 0x20: [mem 0xd6000c80-0xd6000cff]
pci 0000:06:00.0: reg 0x24: [mem 0xd6000c00-0xd6000c7f]
pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
pci 0000:06:00.1: reg 0x10: [mem 0xd6000b00-0xd6000bff]
pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
pci 0000:06:00.2: reg 0x10: [mem 0xd6000a00-0xd6000aff]
pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
pci 0000:06:00.3: reg 0x10: [mem 0xd6000900-0xd60009ff]
pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
pci 0000:06:00.4: reg 0x10: [mem 0xd6000800-0xd60008ff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd6000000-0xd6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.5: PCI bridge to [bus 07-09]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:00:1c.5: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdea8000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf81000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdfdf000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x0600-0x060f] has been reserved
system 00:01: [io 0x0610] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0810-0x0817] has been reserved
system 00:01: [io 0x0820-0x0823] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [io 0x0380-0x038e] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs SYN1e04 SYN1e00 SYN0002 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs ENE0100 (active)
pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xda020000-0xda03ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.0: bridge window [mem 0xd9000000-0xd9ffffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd1020000-0xd102ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd8ffffff]
pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xd7000000-0xd7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd6000000-0xd6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-09]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd5000000-0xd5ffffff]
pci 0000:00:1c.5: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xda000000-0xda0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xd9000000-0xd9ffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xd8000000-0xd8ffffff]
pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xd7000000-0xd7ffffff]
pci_bus 0000:05: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: resource 1 [mem 0xd6000000-0xd6ffffff]
pci_bus 0000:06: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xd5000000-0xd5ffffff]
pci_bus 0000:07: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16916K (ffff880035ee6000 - ffff880036f6b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9ea8000-0xbdea8000] (64MB) mapped at [ffff8800b9ea8000-ffff8800bdea7fff]
Simple Boot Flag at 0x44 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1396637734.664:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7836
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (64 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xda105c00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xda105800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
ACPI: Battery Slot [BAT0] (battery present)
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 10:88:948
tty tty5: hash matches
memory memory1: hash matches
rtc_cmos 00:03: setting system clock to 2014-04-04 18:55:35 UTC (1396637735)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
systemd-udevd[104]: starting version 204
mii: module verification failed: signature and/or required key missing - tainting kernel
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 46 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90000630000, 00:26:9e:63:21:03, XID 1c4000c0 IRQ 46
r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105180 irq 47
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105380 irq 47
firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
usb 2-4: new high-speed USB device number 2 using ehci-pci
usb 2-4: New USB device found, idVendor=0408, idProduct=03f1
usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-4: Product: HP Webcam
usb 2-4: Manufacturer: SN001
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BEVT-60ZAT1, 02.01A02, max UDMA/100
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-6 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
firewire_core 0000:06:00.0: created device fw0: GUID 00241b00d5ad9d01, S400
sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-2: new low-speed USB device number 2 using uhci_hcd
usb 4-2: New USB device found, idVendor=1bcf, idProduct=0007
usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-2: Product: USB Optical Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5
hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: hp DVD RW AD-7561S, AH73, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVD RW AD-7561S AH73 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 4159484k swap on /dev/sda7. Priority:-1 extents:1 across:4159484k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[280]: starting version 204
wmi: Mapper loaded
ACPI Error: [_T_1] Namespace lookup failure, AE_ALREADY_EXISTS (20130517/dswload2-330)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20130517/psobject-222)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node ffff880139a516b8), AE_ALREADY_EXISTS (20130517/psparse-536)
ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node ffff880139a51690), AE_ALREADY_EXISTS (20130517/psparse-536)
ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning: Evaluating _BQC failed (20130517/video-566)
hp_accel: laptop model unknown, using default axes configuration
acpi device:08: registered as cooling_device2
ACPI Error: [_T_1] Namespace lookup failure, AE_ALREADY_EXISTS (20130517/dswload2-330)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20130517/psobject-222)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node ffff880139a51938), AE_ALREADY_EXISTS (20130517/psparse-536)
ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node ffff880139a51910), AE_ALREADY_EXISTS (20130517/psparse-536)
ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning: Evaluating _BQC failed (20130517/video-566)
acpi device:0a: registered as cooling_device3
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
lis3lv02d: 8 bits sensor found
ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
ene_ir: PLL freq = 1406
ene_ir: KB3926D or higher detected
ene_ir: Firmware regs: 60 01
ene_ir: Hardware features:
ene_ir: * Uses GPIO 40 for IR demodulated input
lp: driver loaded but no devices found
Registered IR keymap rc-rc6-mce
input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 249
IR LIRC bridge handler initialized
input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input8
rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
ene_ir: driver has been successfully loaded
[drm] Initialized drm 1.1.0 20060810
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
cfg80211: Calling CRDA to update world regulatory domain
[drm] radeon kernel modesetting enabled.
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
[drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x103C:0x3628).
[drm] register mmio base: 0xDA000000
[drm] register mmio size: 65536
ATOM BIOS: BR32702.004
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
type=1400 audit(1396630548.854:2): apparmor="STATUS" operation="profile_load" parent=329 profile="unconfined" name="/sbin/dhclient" pid=339 comm="apparmor_parser"
type=1400 audit(1396630548.854:3): apparmor="STATUS" operation="profile_load" parent=329 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=339 comm="apparmor_parser"
type=1400 audit(1396630548.854:4): apparmor="STATUS" operation="profile_load" parent=329 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=339 comm="apparmor_parser"
type=1400 audit(1396630548.854:5): apparmor="STATUS" operation="profile_replace" parent=329 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=339 comm="apparmor_parser"
type=1400 audit(1396630548.854:6): apparmor="STATUS" operation="profile_replace" parent=329 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=339 comm="apparmor_parser"
type=1400 audit(1396630548.854:7): apparmor="STATUS" operation="profile_replace" parent=329 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=339 comm="apparmor_parser"
[TTM] Zone kernel: Available graphics memory: 2007666 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
INFO @wl_cfg80211_attach : Registered CFG80211 phy
lib80211_crypt: registered algorithm 'TKIP'
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV710 Microcode
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
mute LED gpio 8 polarity 1
autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Internal Mic=0x18
Mic=0xb
input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88012be04c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88012be04c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004d1c598
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 49 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
Linux video capture interface: v2.00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)
input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
input: HP WMI hotkeys as /devices/virtual/input/input13
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] radeon: power management initialized
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
gpio_ich: GPIO from 195 to 255 on gpio_ich
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (570) killed by TERM signal
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1396630550.726:8): apparmor="STATUS" operation="profile_load" parent=688 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=693 comm="apparmor_parser"
type=1400 audit(1396630550.726:9): apparmor="STATUS" operation="profile_load" parent=688 profile="unconfined" name="chromium_browser" pid=693 comm="apparmor_parser"
type=1400 audit(1396630550.726:10): apparmor="STATUS" operation="profile_load" parent=688 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=694 comm="apparmor_parser"
type=1400 audit(1396630550.726:11): apparmor="STATUS" operation="profile_load" parent=688 profile="unconfined" name="chromium_browser" pid=694 comm="apparmor_parser"
[drm] fb mappable at 0xC035F000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
init: avahi-cups-reload main process (706) terminated with status 1
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 170x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 162 callbacks suppressed
type=1400 audit(1396631763.182:66): apparmor="STATUS" operation="profile_replace" parent=2586 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2590 comm="apparmor_parser"
type=1400 audit(1396631763.182:67): apparmor="STATUS" operation="profile_replace" parent=2586 profile="unconfined" name="/usr/sbin/cupsd" pid=2590 comm="apparmor_parser"
type=1400 audit(1396631763.182:68): apparmor="STATUS" operation="profile_replace" parent=2586 profile="unconfined" name="/usr/sbin/cupsd" pid=2590 comm="apparmor_parser"
perf samples too long (2537 > 2500), lowering kernel.perf_event_max_sample_rate to 50000