dmesg - bullet4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-59-generic-pae (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #90-Ubuntu SMP Tue Jan 7 23:07:06 UTC 2014 (Ubuntu 3.2.0-59.90-generic-pae 3.2.54)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000776a1000 (usable)
BIOS-e820: 00000000776a1000 - 00000000776a7000 (reserved)
BIOS-e820: 00000000776a7000 - 00000000777bc000 (usable)
BIOS-e820: 00000000777bc000 - 000000007780f000 (reserved)
BIOS-e820: 000000007780f000 - 0000000077908000 (usable)
BIOS-e820: 0000000077908000 - 0000000077b0f000 (reserved)
BIOS-e820: 0000000077b0f000 - 0000000077b18000 (usable)
BIOS-e820: 0000000077b18000 - 0000000077b1f000 (reserved)
BIOS-e820: 0000000077b1f000 - 0000000077b64000 (usable)
BIOS-e820: 0000000077b64000 - 0000000077b9f000 (ACPI NVS)
BIOS-e820: 0000000077b9f000 - 0000000077be4000 (usable)
BIOS-e820: 0000000077be4000 - 0000000077bff000 (ACPI data)
BIOS-e820: 0000000077bff000 - 0000000077c00000 (usable)
BIOS-e820: 0000000077c00000 - 0000000077e00000 (reserved)
BIOS-e820: 0000000078000000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: TOSHIBA Satellite Pro C660/PWWAM, BIOS 1.00 09/03/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x77c00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 078000000 mask FF8000000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 0FFE00000 mask FFFF80000 write-protect
3 base 077E00000 mask FFFE00000 uncachable
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f6c70] f6c70
initial memory mapped : 0 - 02000000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000
RAMDISK: 364d4000 - 37262000
ACPI: RSDP 000f6bb0 00024 (v02 TOSCPL)
ACPI: XSDT 77bf6638 0006C (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
ACPI: FACP 77be6000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 77be7000 083D2 (v02 Intel CANTIGA 06040000 INTL 20060608)
ACPI: FACS 77b9efc0 00040
ACPI: HPET 77bfed14 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 77bfed4c 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIC 77bfed88 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
ACPI: OSFR 77bfeefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
ACPI: APIC 77bfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 77bfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 77bf66dc 000FE (v01 BrtRef DD01BRT 00001000 INTL 20050624)
ACPI: SSDT 77be5000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1024MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x00077c00
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000776a1
0: 0x000776a7 -> 0x000777bc
0: 0x0007780f -> 0x00077908
0: 0x00077b0f -> 0x00077b18
0: 0x00077b1f -> 0x00077b64
0: 0x00077b9f -> 0x00077be4
0: 0x00077bff -> 0x00077c00
On node 0 totalpages: 489682
free_area_init_node: node 0, pgdat c1873a00, node_mem_map f55dc200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2049 pages used for memmap
HighMem zone: 259396 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bd8000 s34240 r0 d23104 u57344
pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 485849
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 7847680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00077c00)
Memory: 1910480k/1961984k available (5845k kernel code, 48248k reserved, 2863k data, 744k init, 1045780k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1882000 - 0xc193c000 ( 744 kB)
.data : 0xc15b547c - 0xc1881240 (2863 kB)
.text : 0xc1000000 - 0xc15b547c (5845 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5008000 soft=f500a000
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.375 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.75 BogoMIPS (lpj=8777500)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
TOSHIBA Satellite detected - force copy of DSDT to local memory
ACPI: Forced DSDT copy: length 0x083D2 copied locally, original unmapped
ftrace: allocating 26147 entries in 52 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f50fa000 soft=f50fc000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8777.70 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 77b64000 (241664 bytes)
print_constraints: dummy:
RTC time: 9:50:19, date: 04/04/14
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 77b1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 77b18620 005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 77b19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 77b19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf2800000-0xf2bfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xf2100000-0xf21fffff 64bit]
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf2504800-0xf2504bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf2300000-0xf2303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf2504c00-0xf2504fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xf2504000-0xf25047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:0e:00.0: [10ec:8136] type 0 class 0x000200
pci 0000:0e:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:0e:00.0: reg 18: [mem 0xf2004000-0xf2004fff 64bit pref]
pci 0000:0e:00.0: reg 20: [mem 0xf2000000-0xf2003fff 64bit pref]
pci 0000:0e:00.0: supports D1 D2
pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
pci 0000:14:00.0: [10ec:8176] type 0 class 0x000280
pci 0000:14:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:14:00.0: reg 18: [mem 0xf2200000-0xf2203fff 64bit]
pci 0000:14:00.0: supports D1 D2
pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:14:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 14-14]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:00:1e.0: PCI bridge to [bus 26-26] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 00000000776a1000 - 0000000077ffffff
reserve RAM buffer: 00000000777bc000 - 0000000077ffffff
reserve RAM buffer: 0000000077908000 - 0000000077ffffff
reserve RAM buffer: 0000000077b18000 - 0000000077ffffff
reserve RAM buffer: 0000000077b64000 - 0000000077ffffff
reserve RAM buffer: 0000000077be4000 - 0000000077ffffff
reserve RAM buffer: 0000000077c00000 - 0000000077ffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x80000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0068]
pnp 00:04: [io 0x006c]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0480-0x048f]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x047f]
pnp 00:04: [io 0x1180-0x11ff]
pnp 00:04: [io 0xfe00]
pnp 00:04: [io 0xff2c-0xff7f]
system 00:04: [io 0x0480-0x048f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x047f] has been reserved
system 00:04: [io 0x1180-0x11ff] has been reserved
system 00:04: [io 0xfe00] has been reserved
system 00:04: [io 0xff2c-0xff7f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs TOS0100 SYN0700 SYN0002 PNP0f13 (active)
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed10000-0xfed13fff]
pnp 00:08: [mem 0xfed18000-0xfed18fff]
pnp 00:08: [mem 0xfed19000-0xfed19fff]
pnp 00:08: [mem 0xe0000000-0xefffffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed45000-0xfed8ffff]
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff 64bit]
pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff 64bit] (PCI address [0x80000000-0x800000ff])
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x80300000-0x806fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0x80300000-0x806fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 14-14]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:00:1c.3: bridge window [mem 0x80100000-0x802fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 26-26]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:0e: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0e: resource 1 [mem 0x80300000-0x806fffff]
pci_bus 0000:0e: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
pci_bus 0000:14: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:14: resource 1 [mem 0xf2200000-0xf22fffff]
pci_bus 0000:14: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:26: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:26: resource 9 [mem 0x80000000-0xdfffffff]
pci_bus 0000:26: resource 10 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.2: PCI INT C disabled
pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1396605018.436:1): initialized
Freeing initrd memory: 13880k freed
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1715
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Battery Slot [BAT1] (battery present)
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 131072K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504300 irq 43
ata6: SATA max UDMA/133 abar m2048@0xf2504000 port 0xf2504380 irq 43
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf2504800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2504c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 10:28:828
rtc_cmos 00:05: setting system clock to 2014-04-04 09:50:20 UTC (1396605020)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-5: new high-speed USB device number 2 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
ata5.00: configured for UDMA/100
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 744k freed
Write protecting the kernel text: 5848k
Write protecting the kernel read-only data: 2388k
NX-protecting the kernel data: 4392k
udevd[97]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:0e:00.0: setting latency timer to 64
r8169 0000:0e:00.0: irq 44 for MSI/MSI-X
r8169 0000:0e:00.0: eth0: RTL8105e at 0xf841c000, 88:ae:1d:f3:6e:c0, XID 00900000 IRQ 44
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi6 : usb-storage 1-5:1.0
usbcore: registered new interface driver ums-realtek
usb 1-6: new high-speed USB device number 3 using ehci_hcd
usb 1-5: USB disconnect, device number 2
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
EXT4-fs (sda6): orphan cleanup on readonly fs
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 542671
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 542659
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392560
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392559
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392579
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392565
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392564
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392544
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392558
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 392556
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 542677
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 542683
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 542225
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 531211
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 531928
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 531925
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 131784
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 663954
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 663934
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 131570
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 531865
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 531860
EXT4-fs (sda6): 22 orphan inodes deleted
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 1956860k swap on /dev/sda5. Priority:-1 extents:1 across:1956860k
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[327]: starting version 175
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 45 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
type=1400 audit(1396597838.035:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
type=1400 audit(1396597838.035:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
type=1400 audit(1396597838.035:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
cfg80211: Calling CRDA to update world regulatory domain
fixme: max PWM is zero.
wmi: Mapper loaded
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
input: Toshiba input device as /devices/virtual/input/input4
Registered led device: toshiba::illumination
rtl8192ce 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
rtl8192ce 0000:14:00.0: setting latency timer to 64
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1396597838.228:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=693 comm="apparmor_parser"
type=1400 audit(1396597838.228:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=693 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a216)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
init: failsafe main process (770) killed by TERM signal
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
type=1400 audit(1396597838.628:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=899 comm="apparmor_parser"
type=1400 audit(1396597838.628:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=899 comm="apparmor_parser"
type=1400 audit(1396597838.632:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
type=1400 audit(1396597838.632:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
type=1400 audit(1396597838.632:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:0a: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
r8169 0000:0e:00.0: eth0: link down
r8169 0000:0e:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1c3 offMax=0xadf
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
init: alsa-restore main process (955) terminated with status 19
init: plymouth-splash main process (1039) terminated with status 2
vboxpci: IOMMU not found (not registered)
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
psmouse serio1: synaptics: Toshiba Satellite Pro C660 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
init: plymouth-stop pre-start process (1255) terminated with status 1
r8169 0000:0e:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present