dmesg - dynamic
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5+steamos1+bsos1) ) #1 SMP Debian 3.10.11-1st1 (2014-03-18)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000dd8a2fff] usable
BIOS-e820: [mem 0x00000000dd8a3000-0x00000000ddb7ffff] reserved
BIOS-e820: [mem 0x00000000ddb80000-0x00000000ddb89fff] ACPI data
BIOS-e820: [mem 0x00000000ddb8a000-0x00000000ddec9fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddeca000-0x00000000dea60fff] reserved
BIOS-e820: [mem 0x00000000dea61000-0x00000000dea61fff] usable
BIOS-e820: [mem 0x00000000dea62000-0x00000000dec67fff] ACPI NVS
BIOS-e820: [mem 0x00000000dec68000-0x00000000df06dfff] usable
BIOS-e820: [mem 0x00000000df06e000-0x00000000df7eefff] reserved
BIOS-e820: [mem 0x00000000df7ef000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xddb82000 ACPI 2.0=0xddb82000 SMBIOS=0xf04c0 MPS=0xfd550
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x000000000035c000) (2MB)
efi: mem05: type=7, attr=0xf, range=[0x000000000035c000-0x0000000001000000) (12MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000001100000-0x0000000035e52000) (845MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000035e52000-0x0000000036f21000) (16MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000036f21000-0x0000000099d0e000) (1581MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000099d0e000-0x00000000ce1dc000) (836MB)
efi: mem11: type=7, attr=0xf, range=[0x00000000ce1dc000-0x00000000ce1e2000) (0MB)
efi: mem12: type=1, attr=0xf, range=[0x00000000ce1e2000-0x00000000ce249000) (0MB)
efi: mem13: type=7, attr=0xf, range=[0x00000000ce249000-0x00000000d0d28000) (42MB)
efi: mem14: type=4, attr=0xf, range=[0x00000000d0d28000-0x00000000d0f69000) (2MB)
efi: mem15: type=7, attr=0xf, range=[0x00000000d0f69000-0x00000000d0f7e000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000d0f7e000-0x00000000d12f5000) (3MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000d12f5000-0x00000000d12fd000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000d12fd000-0x00000000d1357000) (0MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000d1357000-0x00000000d137b000) (0MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000d137b000-0x00000000d143f000) (0MB)
efi: mem21: type=7, attr=0xf, range=[0x00000000d143f000-0x00000000d1463000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x00000000d1463000-0x00000000d1526000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x00000000d1526000-0x00000000d154a000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x00000000d154a000-0x00000000d1607000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000d1607000-0x00000000d162b000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000d162b000-0x00000000d16e2000) (0MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000d16e2000-0x00000000d1706000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000d1706000-0x00000000d1713000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000d1713000-0x00000000d1724000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000d1724000-0x00000000d181c000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000d181c000-0x00000000d1840000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000d1840000-0x00000000d1849000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000d1849000-0x00000000d185d000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000d185d000-0x00000000d1882000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000d1882000-0x00000000d188e000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000d188e000-0x00000000d188f000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000d188f000-0x00000000d1893000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000d1893000-0x00000000d1bf3000) (3MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000d1bf3000-0x00000000d1bf9000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000d1bf9000-0x00000000d1c2c000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000d1c2c000-0x00000000d1df3000) (1MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000d1df3000-0x00000000d1e3e000) (0MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000d1e3e000-0x00000000d1e7a000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000d1e7a000-0x00000000d1e82000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000d1e82000-0x00000000d1e89000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000d1e89000-0x00000000d1f19000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000d1f19000-0x00000000d1f1d000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000d1f1d000-0x00000000d1f29000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x00000000d1f29000-0x00000000d1f2a000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x00000000d1f2a000-0x00000000dcdad000) (174MB)
efi: mem51: type=7, attr=0xf, range=[0x00000000dcdad000-0x00000000dd2e7000) (5MB)
efi: mem52: type=2, attr=0xf, range=[0x00000000dd2e7000-0x00000000dd2ed000) (0MB)
efi: mem53: type=3, attr=0xf, range=[0x00000000dd2ed000-0x00000000dd8a3000) (5MB)
efi: mem54: type=0, attr=0xf, range=[0x00000000dd8a3000-0x00000000dd935000) (0MB)
efi: mem55: type=0, attr=0xf, range=[0x00000000dd935000-0x00000000ddb80000) (2MB)
efi: mem56: type=9, attr=0xf, range=[0x00000000ddb80000-0x00000000ddb82000) (0MB)
efi: mem57: type=9, attr=0xf, range=[0x00000000ddb82000-0x00000000ddb8a000) (0MB)
efi: mem58: type=10, attr=0xf, range=[0x00000000ddb8a000-0x00000000dde36000) (2MB)
efi: mem59: type=10, attr=0xf, range=[0x00000000dde36000-0x00000000ddeca000) (0MB)
efi: mem60: type=6, attr=0x800000000000000f, range=[0x00000000ddeca000-0x00000000de893000) (9MB)
efi: mem61: type=6, attr=0x800000000000000f, range=[0x00000000de893000-0x00000000de99c000) (1MB)
efi: mem62: type=6, attr=0x800000000000000f, range=[0x00000000de99c000-0x00000000de99e000) (0MB)
efi: mem63: type=6, attr=0x800000000000000f, range=[0x00000000de99e000-0x00000000dea3c000) (0MB)
efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000dea3c000-0x00000000dea43000) (0MB)
efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000dea43000-0x00000000dea61000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x00000000dea61000-0x00000000dea62000) (0MB)
efi: mem67: type=10, attr=0xf, range=[0x00000000dea62000-0x00000000dec68000) (2MB)
efi: mem68: type=4, attr=0xf, range=[0x00000000dec68000-0x00000000dedb8000) (1MB)
efi: mem69: type=3, attr=0xf, range=[0x00000000dedb8000-0x00000000df058000) (2MB)
efi: mem70: type=4, attr=0xf, range=[0x00000000df058000-0x00000000df05a000) (0MB)
efi: mem71: type=3, attr=0xf, range=[0x00000000df05a000-0x00000000df05e000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x00000000df05e000-0x00000000df062000) (0MB)
efi: mem73: type=3, attr=0xf, range=[0x00000000df062000-0x00000000df064000) (0MB)
efi: mem74: type=4, attr=0xf, range=[0x00000000df064000-0x00000000df06e000) (0MB)
efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000df06e000-0x00000000df7ef000) (7MB)
efi: mem76: type=4, attr=0xf, range=[0x00000000df7ef000-0x00000000df7f2000) (0MB)
efi: mem77: type=3, attr=0xf, range=[0x00000000df7f2000-0x00000000df7f3000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000df7f3000-0x00000000df800000) (0MB)
efi: mem79: type=7, attr=0xf, range=[0x0000000100001000-0x0000000120000000) (511MB)
efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem81: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem82: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
SMBIOS 2.7 present.
DMI: MSI MS-7640/990FXA-GD80 (MS-7640), BIOS V13.5 09/17/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF800000 mask FFFFFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xdf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff8800000fd8e0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0186e000, 0x0186efff] PGTABLE
BRK [0x0186f000, 0x0186ffff] PGTABLE
BRK [0x01870000, 0x01870fff] PGTABLE
init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[mem 0x11fe00000-0x11fffffff] page 2M
BRK [0x01871000, 0x01871fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[mem 0x11c000000-0x11fdfffff] page 2M
init_memory_mapping: [mem 0x100001000-0x11bffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x11bffffff] page 2M
BRK [0x01872000, 0x01872fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xdd8a2fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdd7fffff] page 2M
[mem 0xdd800000-0xdd8a2fff] page 4k
init_memory_mapping: [mem 0xdea61000-0xdea61fff]
[mem 0xdea61000-0xdea61fff] page 4k
BRK [0x01873000, 0x01873fff] PGTABLE
init_memory_mapping: [mem 0xdec68000-0xdf06dfff]
[mem 0xdec68000-0xdedfffff] page 4k
[mem 0xdee00000-0xdeffffff] page 2M
[mem 0xdf000000-0xdf06dfff] page 4k
init_memory_mapping: [mem 0xdf7ef000-0xdf7fffff]
[mem 0xdf7ef000-0xdf7fffff] page 4k
RAMDISK: [mem 0x35e52000-0x36f20fff]
ACPI: RSDP 00000000ddb82000 00024 (v02 ALASKA)
ACPI: XSDT 00000000ddb82070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ddb89310 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130328/tbfadt-603)
ACPI: DSDT 00000000ddb82168 071A4 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000ddec3080 00040
ACPI: APIC 00000000ddb89420 0007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ddb894a0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ddb894e8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000ddb89528 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000ddb89560 008BC (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: BGRT 00000000ddb89e20 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 00000000ddb89e58 000E8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x00000000-0x11fffffff]
NODE_DATA [mem 0x11fff7000-0x11fffafff]
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0xdd8a2fff]
node 0: [mem 0xdea61000-0xdea61fff]
node 0: [mem 0xdec68000-0xdf06dfff]
node 0: [mem 0xdf7ef000-0xdf7fffff]
node 0: [mem 0x100001000-0x11fffffff]
On node 0 totalpages: 1039449
DMA zone: 56 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12365 pages used for memmap
DMA32 zone: 904379 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 131071 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000dd8a3000 - 00000000ddb80000
PM: Registered nosave memory: 00000000ddb80000 - 00000000ddb8a000
PM: Registered nosave memory: 00000000ddb8a000 - 00000000ddeca000
PM: Registered nosave memory: 00000000ddeca000 - 00000000dea61000
PM: Registered nosave memory: 00000000dea62000 - 00000000dec68000
PM: Registered nosave memory: 00000000df06e000 - 00000000df7ef000
PM: Registered nosave memory: 00000000df800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xdf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s84928 r8192 d21568 u524288
pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1025211
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c8000000
PM: Registered nosave memory: 00000000c8000000 - 00000000cc000000
Memory: 3736256k/4718592k available (3685k kernel code, 560796k absent, 421540k reserved, 3084k data, 920k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3400.473 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.94 BogoMIPS (lpj=13601892)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0xddeca000-0xdea3bfff]
[mem 0xddeca000-0xddffffff] page 4k
[mem 0xde000000-0xde9fffff] page 2M
[mem 0xdea00000-0xdea3bfff] page 4k
init_memory_mapping: [mem 0xdea3c000-0xdea60fff]
[mem 0xdea3c000-0xdea60fff] page 4k
init_memory_mapping: [mem 0xdf06e000-0xdf7eefff]
[mem 0xdf06e000-0xdf1fffff] page 4k
[mem 0xdf200000-0xdf5fffff] page 2M
[mem 0xdf600000-0xdf7eefff] page 4k
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00df800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (27203.78 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xddb8a000-0xddec9fff] (3407872 bytes)
PM: Registering ACPI NVS region [mem 0xdea62000-0xdec67fff] (2121728 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
node 0 link 0: io port [b000, ffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, fef0ffff] ==> [f0000000, fef0ffff]
TOM2: 0000000120000000 aka 4608M
bus: [bus 00-1f] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x120000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 24: [mem 0xfe60b000-0xfe60b3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe60a000-0xfe60afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe609000-0xfe6090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe608000-0xfe608fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe607000-0xfe6070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe606000-0xfe606fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe605000-0xfe605fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe604000-0xfe6040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:1004] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: [197b:2362] type 00 class 0x010185
pci 0000:02:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:02:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:02:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:02:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:02:00.0: reg 24: [mem 0xfe500000-0xfe5001ff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:03:00.0: reg 18: [mem 0xfe404000-0xfe404fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfe400000-0xfe403fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xfe300000-0xfe301fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 10: [mem 0xfe200000-0xfe201fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:08:00.0: reg 10: [mem 0xfe100000-0xfe1007ff 64bit]
pci 0000:08:00.0: reg 18: [io 0xb000-0xb0ff]
pci 0000:08:00.0: supports D2
pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.1: bridge window [mem 0xfe100000-0xfe1fffff]
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xdd8a3000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdea62000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf06e000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [io 0x0485-0x0486] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0480-0x0481] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.1: bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xe0000000-0xffffffff]
pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17212k freed
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xccd28000-0xd0d28000] (64MB) mapped at [ffff8800ccd28000-ffff8800d0d27fff]
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1396575830.988:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7729
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf9000000, mapped to 0xffffc90011980000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching consoles 2-6 to frame buffer device
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-04-04 01:43:51 UTC (1396575831)
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 400k freed
Freeing unused kernel memory: 488k freed
udevd[69]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 73 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000001a000, 8c:89:a5:64:01:a1, XID 0c900800 IRQ 73
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new device driver usb
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: bus type ATA registered
ehci-pci: EHCI PCI platform driver
wmi: Mapper loaded
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
QUIRK: Enable AMD PLL fix
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe60a000
libata version 3.00 loaded.
firewire_ohci 0000:08:00.0: enabling device (0000 -> 0003)
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:05:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 83 for MSI/MSI-X
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.10-3-amd64 xhci_hcd
usb usb5: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.10-3-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe608000
firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.10-3-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe606000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.10-3-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe605000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI Host Controller
usb usb8: Manufacturer: Linux 3.10-3-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:16.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 9
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: EHCI Host Controller
usb usb9: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb9: SerialNumber: 0000:00:12.2
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
usb 6-3: new low-speed USB device number 2 using ohci_hcd
firewire_core 0000:08:00.0: created device fw0: GUID 0010dc0001d11b87, S400
usb 6-3: New USB device found, idVendor=046d, idProduct=c01d
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB-PS/2 Optical Mouse
usb 6-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/input/input2
hid-generic 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-3/input0
usb 6-4: new full-speed USB device number 3 using ohci_hcd
tsc: Refined TSC clocksource calibration: 3400.244 MHz
Switching to clocksource tsc
usb 6-4: not running at top speed; connect to a high speed hub
usb 6-4: New USB device found, idVendor=125f, idProduct=c08a
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-4: Product: ADATA USB Flash Drive
usb 6-4: Manufacturer: ADATA
usb 6-4: SerialNumber: 13904183721803A4
usb-storage 6-4:1.0: USB Mass Storage device detected
scsi0 : usb-storage 6-4:1.0
usbcore: registered new interface driver usb-storage
usb 6-5: new low-speed USB device number 4 using ohci_hcd
usb 6-5: New USB device found, idVendor=045e, idProduct=00dd
usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-5: Product: Comfort Curve Keyboard 2000
usb 6-5: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.0/usb6/6-5/6-5:1.0/input/input3
hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.0-5/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.0/usb6/6-5/6-5:1.1/input/input4
hid-generic 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.0-5/input1
usb 6-3: USB disconnect, device number 2
usb 6-4: USB disconnect, device number 3
usb 6-5: USB disconnect, device number 4
usb 8-1: new full-speed USB device number 2 using ohci_hcd
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 10
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe607000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: EHCI Host Controller
usb usb10: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb10: SerialNumber: 0000:00:13.2
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 5 ports detected
usb 8-1: New USB device found, idVendor=045e, idProduct=028e
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Controller
usb 8-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 8-1: SerialNumber: 0FEEA69
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
scsi1 : pata_atiixp
scsi2 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
ahci 0000:02:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500100 irq 44
ata8: SATA max UDMA/133 abar m512@0xfe500000 port 0xfe500180 irq 44
usb 8-4: new full-speed USB device number 3 using ohci_hcd
ata1.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-9: WDC WD10EZEX-21M2NA0, 01.01A01, max UDMA/133
ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access ATA WDC WD10EZEX-21M 01.0 PQ: 0 ANSI: 5
usb 8-4: not running at top speed; connect to a high speed hub
usb 8-4: New USB device found, idVendor=045e, idProduct=0772
usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4: Product: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Studio(TM)
usb 8-4: Manufacturer: Microsoft
hid-generic 0003:045E:0772.0004: hiddev0,hidraw0: USB HID v1.01 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Studio(TM)] on usb-0000:00:16.0-4/input4
usb 8-1: USB disconnect, device number 2
usb 8-4: USB disconnect, device number 3
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 11
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe604000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: EHCI Host Controller
usb usb11: Manufacturer: Linux 3.10-3-amd64 ehci_hcd
usb usb11: SerialNumber: 0000:00:16.2
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:1:0: [sdb] 4096-byte physical blocks
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:1:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4 sda5
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:1:0: Attached scsi generic sg1 type 0
usb 10-4: new high-speed USB device number 3 using ehci-pci
usb 10-4: New USB device found, idVendor=125f, idProduct=c08a
usb 10-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 10-4: Product: ADATA USB Flash Drive
usb 10-4: Manufacturer: ADATA
usb 10-4: SerialNumber: 13904183721803A4
usb-storage 10-4:1.0: USB Mass Storage device detected
scsi9 : usb-storage 10-4:1.0
usb 6-3: new low-speed USB device number 5 using ohci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 8:4 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 6-3: New USB device found, idVendor=046d, idProduct=c01d
usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-3: Product: USB-PS/2 Optical Mouse
usb 6-3: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb6/6-3/6-3:1.0/input/input5
hid-generic 0003:046D:C01D.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-3/input0
udevd[483]: starting version 175
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc9000005eb00). heartbeat=60 sec (nowayout=0)
EDAC MC: Ver: 3.0.0
input: PC Speaker as /devices/platform/pcspkr/input/input6
EFI Variables Facility v0.08 2004-May-17
MCE: In-kernel MCE decoding enabled.
microcode: CPU0: patch_level=0x010000c8
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
platform microcode: firmware: agent aborted loading amd-ucode/microcode_amd.bin (not found?)
microcode: CPU1: patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
acpi-cpufreq: overriding BIOS provided _PSD data
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 6-5: new low-speed USB device number 6 using ohci_hcd
usb 6-5: New USB device found, idVendor=045e, idProduct=00dd
usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-5: Product: Comfort Curve Keyboard 2000
usb 6-5: Manufacturer: Microsoft
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.0/usb6/6-5/6-5:1.0/input/input15
hid-generic 0003:045E:00DD.0006: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.0-5/input0
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.0/usb6/6-5/6-5:1.1/input/input16
hid-generic 0003:045E:00DD.0007: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.0-5/input1
scsi 9:0:0:0: Direct-Access ADATA USB Flash Drive 0.00 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdc] 7592960 512-byte logical blocks: (3.88 GB/3.62 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 9:0:0:0: [sdc] Attached SCSI removable disk
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 11-4: new high-speed USB device number 3 using ehci-pci
usb 11-4: New USB device found, idVendor=045e, idProduct=0772
usb 11-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-4: Product: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Studio(TM)
usb 11-4: Manufacturer: Microsoft
hid-generic 0003:045E:0772.0008: hiddev0,hidraw3: USB HID v1.01 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Studio(TM)] on usb-0000:00:16.2-4/input4
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Studio(TM) (045e:0772)
input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Studio(TM) as /devices/pci0000:00/0000:00:16.2/usb11/11-4/11-4:1.0/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
usb 8-1: new full-speed USB device number 4 using ohci_hcd
usb 8-1: New USB device found, idVendor=045e, idProduct=028e
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: Controller
usb 8-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
usb 8-1: SerialNumber: 0FEEA69
usbcore: registered new interface driver xpad
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:16.0/usb8/8-1/8-1:1.0/input/input22
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
3:3:1: cannot get freq at ep 0x82
usbcore: registered new interface driver snd-usb-audio
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
nvidia 0000:01:00.0: irq 84 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
3:3:1: cannot get freq at ep 0x82
3:3:1: cannot get freq at ep 0x82
3:3:1: cannot get freq at ep 0x82
3:3:1: cannot get freq at ep 0x82